ATMF-CES Table View

The CES configuration table used to manage interworking
between CBR interfaces or channels and ATM Virtual Channel
Links (VCLs).  The reverse mapping is shown in the
atmfCESMappingTable.

atmfCESConfEntry row .1.3.6.1.4.1.353.5.2.2.1.1.1

An entry in the CES configuration table. There is one
entry in the table per CES entity, mapping one CBR
interface, channel, or bundle to an ATM VCL.

Creation of a row in this table with a non-zero
atmfCES…

Indexes

atmfCESCbrIndex

Column	Syntax	OID
atmfCESCbrIndex The value of this object is equal to MIB II's ifIndex value of the CBR interface, channel, or bundle that is being cross-connected to an ATM VCL.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.353.5.2.2.1.1.1.1
atmfCESAtmIndex The value of this object is equal to MIB II's ifIndex value of the ATM Port interface mapped through this CES IWF to a CBR interface. This value is overwritten whenever an active or passive SVC is established. …	CESConnectionPortr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.2.2.1.1.1.2
atmfCESAtmVpi The value of this object is equal to the VPI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is overwritten whenever an active or passive SVC is established. The value is n…	VpiIntegerr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.353.5.2.2.1.1.1.3
atmfCESAtmVci The value of this object is equal to the VCI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is overwritten whenever an active or passive SVC is established. The distinguis…	VciIntegerr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.2.2.1.1.1.4
atmfCESCbrService Define if DSx/Ex service isas structured or unstructurednot. A structured(2) interface is some nx64kbKbps. An unstructured (1) interface is 1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736 Mbps, or 34.368 Mbps. unstructured(1) p…	Enumerationr/w Enumerated Values: 1 unstructured 2 structured	.1.3.6.1.4.1.353.5.2.2.1.1.1.5
atmfCESCbrClockMode Define if DSx/Ex service clocking mode. This maps into transmit clock source of CBR interface. For structured modes this value, if present, must be set to synchronous(1).	Enumerationr/w Enumerated Values: 1 synchronous 2 srts 3 adaptive	.1.3.6.1.4.1.353.5.2.2.1.1.1.6
atmfCESCas This parameter selects which AAL1 Format should be used: Basic does not carry CAS bits, and uses a single 125 usec frame. e1Cas, ds1SfCas, dS1EsfCas and j2Cas carry CAS bits in a multiframe structure for E1, DS1 SF, DS1…	Enumerationr/w Enumerated Values: 1 basic 2 e1Cas 3 ds1SfCas 4 ds1EsfCas 5 j2Cas	.1.3.6.1.4.1.353.5.2.2.1.1.1.7
atmfCESPartialFill If partial cell fill is used, the number of user octets per cell must be set with this parameter. Setting this parameter to zero disables partial cell fill, and causes all cells to be completely filled before they are …	Integer32r/w Constraints: range: 0-47	.1.3.6.1.4.1.353.5.2.2.1.1.1.8
atmfCESBufMaxSize Define maximum size in 10 microsecond increments of the reassembly buffer. Some implementations may want allow the maximum buffer size to be programmed to a size less than the physical limit to reduce the maximum delay …	10 usecInteger32r/w Constraints: range: 1-65536	.1.3.6.1.4.1.353.5.2.2.1.1.1.9
atmfCESCdvRxT The maximum cell arrival jitter in 10 usec increments that the reassembly process will tolerate in the cell stream without producing errors on the CBR service interface.	10 usecInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.353.5.2.2.1.1.1.10
atmfCESCellLossIntegrationPeriod The time in milliseconds for the cell loss integration period. If a cells are continuously lost for this period of time, atmfCESCellLossStatus is set to loss (2). The default definition is 2500.	msecInteger32r/w Constraints: range: 1000-65535	.1.3.6.1.4.1.353.5.2.2.1.1.1.11
atmfCESConnType The type of ATM connectivity between associated CES IWF's. Valid values are: other - none of the types specified below pvc - supporting connectivity is a permanent virtual connection …	Enumerationr/w Enumerated Values: 1 other 2 pvc 3 activeSvc 4 passiveSvc	.1.3.6.1.4.1.353.5.2.2.1.1.1.12
atmfCESLocalAddr The ATM address of the local CES IWF process. This address may be used by the automatic SVC establishment procedures to identify the intended recipient CES IWF of an incoming automatic SVC call request. Optionally, the …	AtmAddrr/w Type Constraints: range: 0 range: 8 range: 20	.1.3.6.1.4.1.353.5.2.2.1.1.1.13
atmfCESAdminStatus The desired administrative status of the CES interworking function. The up and down states indicate that the traffic flow is enabled or disabled respectively across the CES interworking function.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.353.5.2.2.1.1.1.14
atmfCESOperStatus The operational status of the CES interworking function. The up and down states indicate that the traffic flow is enabled or disabled respectively across the CES interworking function. The unknown state indicates that …	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.353.5.2.2.1.1.1.15
atmfCESConfRowStatus This object is used to create new rows in this table, modify existing rows, and to delete existing rows.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.2.2.1.1.1.16

The CES mapping table used to show the mapping from ATM
VCLs to CBR interfaces or channels.  The mapping and
interworking functions are configured in the
atmfCESConfTable.

atmfCESMappingEntry row .1.3.6.1.4.1.353.5.2.2.1.2.1

An entry in the CES mapping table. There is one entry
in the table corresponding to each active row in the
atmfCESConfTable for which there is a non-zero
atmfCESAtmIndex.

Indexes

atmfCESAtmIndex atmfCESAtmVpi atmfCESAtmVci

Column	Syntax	OID
atmfCESMappingCbrIndex The value of this object is equal to MIB II's ifIndex value of the CBR interface, channel, or bundle that is being cross-connected to an ATM VCL. Examples of the ifType value for the CBR entity are ds1(18), ds3(30), ds…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.353.5.2.2.1.2.1.1

The CES AAL1 statistical data table.

atmfCESStatsEntry row .1.3.6.1.4.1.353.5.2.2.1.3.1

An entry in the CES AAL1 Stats table. There is one
entry in this table corresponding to each entry in the
atmfCESConfTable.

Indexes

No indexes recorded

Column	Syntax	OID
atmfCESReassCells This count gives the number of cells played out to the CES Service Interface. It excludes cells that were discarded for any reason, including cells that were not used due to being declared misinserted, or discarded whil…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.1
atmfCESHdrErrors The count of the number of AAL1 header errors detected, including those corrected. Header errors include correctable and uncorrectable CRC, plus bad parity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.2
atmfCESPointerReframes This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be reacquired. This count is only meaningful for structured CES mo…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.3
atmfCESPointerParityErrors This records the count of the number of events in which the AAL1 reassembler detects a parity check failure at the point where a structured data pointer is expected. This count is only meaningful for structured CES mode…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.4
atmfCESAal1SeqErrors Number of times that the sequence number of an incoming AAL1 Type 1 SAR-PDU causes a transition from the 'sync' state to the 'out of sequence' state, as defined by ITU-T I.363.1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.5
atmfCESLostCells Number of lost cells, as detected by the AAL1 sequence number processing, for example. This records the count of the number of cells detected as lost in the network prior to the destination CES IWF AAL1 layer processing.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.6
atmfCESMisinsertedCells Number of AAL1 sequence violations which the AAL Convergence sublayer interprets as a misinserted cell, as defined by ITU-T I.363.1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.7
atmfCESBufUnderflows Number of buffer underflows. This records the count of the number of times the CES reassembly buffer underflows. In the case of a continuous underflow caused by a loss of ATM cell flow, a single buffer underflow should …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.8
atmfCESBufOverflows Number of buffer overflows. This records the count of the number of times the CES reassembly buffer overflows. If the CES IWF is implemented with multiple buffers (such as a cell level buffer and a bit level buffer, the…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.3.1.9
atmfCESCellLossStatus When cells are continuously lost for the number of milliseconds specified by atmfCESCellLossIntegrationPeriod, the value is set to loss (2). When cells are no longer lost, the value is set to noLoss (1).	Enumeration Enumerated Values: 1 noLoss 2 loss	.1.3.6.1.4.1.353.5.2.2.1.3.1.10

The table used to manage active SVCs established across ATM
networks between CES entities.

atmfCESActiveSvcEntry row .1.3.6.1.4.1.353.5.2.2.1.4.1

An entry in the CES active SVC table. There is one
entry in the table corresponding to each active row in
the atmfCESConfTable for which the atmfCESConnType takes
the value 'activeSvc'.

Indexes

atmfCESCbrIndex

Column	Syntax	OID
atmfCESRemoteAddr The ATM address supporting the corresponding far end CES IWF process. If no address is supplied, no attempts to establish the active SVC are initiated.	AtmAddrr/w Type Constraints: range: 0 range: 8 range: 20	.1.3.6.1.4.1.353.5.2.2.1.4.1.1
atmfCESFirstRetryInterval The time to wait before attempting to establish the SVC after the first failed call attempt. The time to wait between subsequent call attempts may differ to implement a backoff scheme. Zero represents an infinite inte…	secondsInteger32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.353.5.2.2.1.4.1.2
atmfCESRetryTimer Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the active SVC. When the timer is not running, the value zero shall be returned.	secondsInteger32 Constraints: range: 0-86400	.1.3.6.1.4.1.353.5.2.2.1.4.1.3
atmfCESRetryLimit Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. set…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.2.2.1.4.1.4
atmfCESRetryFailures Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the active SVC is restarted.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.2.2.1.4.1.5
atmfCESActiveSvcRestart When the value is set to 'restart' the active SVC is released if necessary and a new setup procedure is begun. As a result of this action, the atmfCESActiveSvcOperStatus object transitions to 'establishmentInProgress' …	Enumerationr/w Enumerated Values: 1 restart 2 noop	.1.3.6.1.4.1.353.5.2.2.1.4.1.6
atmfCESActiveSvcOperStatus Describes the status of the active SVC. Valid values are: other - none of the types specified below establishmentInProgress - connection is not operational, but call attempts are …	Enumeration Enumerated Values: 1 other 2 establishmentInProgress 3 connected 4 retriesExhausted 5 noAddressSupplied 6 lowerLayerDown	.1.3.6.1.4.1.353.5.2.2.1.4.1.7
atmfCESLastReleaseCause Value of the Cause field of the Cause information element in the last RELEASE signalling message received for this active SVC. Indicates the reason for the release.	Integer32 Constraints: range: 1-127	.1.3.6.1.4.1.353.5.2.2.1.4.1.8
atmfCESLastReleaseDiagnostics Value of the first 8 bytes of diagnostic information from the Cause field of the Cause information element in the last RELEASE signalling message received for this active SVC.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.353.5.2.2.1.4.1.9