DVMRP-STD-MIB

        The MIB module for management of DVMRP routers.
    
Source file
DVMRP-STD-MIB
Last revised
Identity
dvmrpStdMIB
Base OID
1.3.6.1.4.1.4526.10.10
Imported Objects
IF-MIB InterfaceIndex InterfaceIndexOrZero
NETGEAR-REF-MIB ng7000managedswitch
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC DisplayString RowStatus
Net-SNMP examples using the netgear MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DVMRP-STD-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DVMRP-STD-MIB::dvmrpStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DVMRP-STD-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DVMRP-STD-MIB::dvmrpStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (58)
.1.3.6.1.4.1.4526.10.10
.1.3.6.1.4.1.4526.10.10.1
.1.3.6.1.4.1.4526.10.10.1.1
.1.3.6.1.4.1.4526.10.10.1.1.1
.1.3.6.1.4.1.4526.10.10.1.1.1.1
.1.3.6.1.4.1.4526.10.10.1.1.1.2
.1.3.6.1.4.1.4526.10.10.1.1.1.3
.1.3.6.1.4.1.4526.10.10.1.1.1.4
.1.3.6.1.4.1.4526.10.10.1.1.2
.1.3.6.1.4.1.4526.10.10.1.1.2.1
.1.3.6.1.4.1.4526.10.10.1.1.2.1.1
.1.3.6.1.4.1.4526.10.10.1.1.2.1.2
Integer32
.1.3.6.1.4.1.4526.10.10.1.1.2.1.3
.1.3.6.1.4.1.4526.10.10.1.1.2.1.4
.1.3.6.1.4.1.4526.10.10.1.1.2.1.5
.1.3.6.1.4.1.4526.10.10.1.1.2.1.6
.1.3.6.1.4.1.4526.10.10.1.1.2.1.7
.1.3.6.1.4.1.4526.10.10.1.1.2.1.8
.1.3.6.1.4.1.4526.10.10.1.1.2.1.9
.1.3.6.1.4.1.4526.10.10.1.1.3
.1.3.6.1.4.1.4526.10.10.1.1.3.1
.1.3.6.1.4.1.4526.10.10.1.1.3.1.1
.1.3.6.1.4.1.4526.10.10.1.1.3.1.10
.1.3.6.1.4.1.4526.10.10.1.1.3.1.11
Enumeration
.1.3.6.1.4.1.4526.10.10.1.1.3.1.12
.1.3.6.1.4.1.4526.10.10.1.1.3.1.2
.1.3.6.1.4.1.4526.10.10.1.1.3.1.3
.1.3.6.1.4.1.4526.10.10.1.1.3.1.4
.1.3.6.1.4.1.4526.10.10.1.1.3.1.5
Integer32
.1.3.6.1.4.1.4526.10.10.1.1.3.1.6
Integer32
.1.3.6.1.4.1.4526.10.10.1.1.3.1.7
Bits
.1.3.6.1.4.1.4526.10.10.1.1.3.1.8
.1.3.6.1.4.1.4526.10.10.1.1.3.1.9
.1.3.6.1.4.1.4526.10.10.1.1.4
.1.3.6.1.4.1.4526.10.10.1.1.4.1
.1.3.6.1.4.1.4526.10.10.1.1.4.1.1
.1.3.6.1.4.1.4526.10.10.1.1.4.1.2
.1.3.6.1.4.1.4526.10.10.1.1.4.1.3
.1.3.6.1.4.1.4526.10.10.1.1.4.1.4
Integer32
.1.3.6.1.4.1.4526.10.10.1.1.4.1.5
.1.3.6.1.4.1.4526.10.10.1.1.4.1.6
.1.3.6.1.4.1.4526.10.10.1.1.4.1.7
.1.3.6.1.4.1.4526.10.10.1.1.5
.1.3.6.1.4.1.4526.10.10.1.1.5.1
.1.3.6.1.4.1.4526.10.10.1.1.5.1.1
.1.3.6.1.4.1.4526.10.10.1.1.5.1.2
.1.3.6.1.4.1.4526.10.10.1.1.5.1.3
Enumeration
.1.3.6.1.4.1.4526.10.10.1.1.5.1.4
.1.3.6.1.4.1.4526.10.10.1.1.6
.1.3.6.1.4.1.4526.10.10.1.1.6.1
.1.3.6.1.4.1.4526.10.10.1.1.6.1.1
.1.3.6.1.4.1.4526.10.10.1.1.6.1.2
.1.3.6.1.4.1.4526.10.10.1.1.6.1.3
.1.3.6.1.4.1.4526.10.10.1.1.6.1.4
.1.3.6.1.4.1.4526.10.10.1.1.7
.1.3.6.1.4.1.4526.10.10.2
.1.3.6.1.4.1.4526.10.10.2.1
.1.3.6.1.4.1.4526.10.10.2.2
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. RFC1155-SMIrfc
  8. NETGEAR-REF-MIBnetgear
  9. SNMP-FRAMEWORK-MIBrfc
  10. DVMRP-STD-MIBnetgearselected
Conformance Groups (7)
A collection of objects used to describe general DVMRP
configuration information.
.1.3.6.1.4.1.4526.10.10.2.2.2
A collection of objects used to describe DVMRP interface
configuration and statistics.
.1.3.6.1.4.1.4526.10.10.2.2.3
A collection of objects used to describe DVMRP peer
configuration and statistics.
.1.3.6.1.4.1.4526.10.10.2.2.4
A collection of objects used to store the DVMRP routing
table.
.1.3.6.1.4.1.4526.10.10.2.2.5
A collection of objects used to store information related
to DVMRP security.
.1.3.6.1.4.1.4526.10.10.2.2.6
A collection of objects used to store information related
to DVMRP prune state.
.1.3.6.1.4.1.4526.10.10.2.2.7
A collection of notifications for signaling important DVMRP
events.
.1.3.6.1.4.1.4526.10.10.2.2.8
Compliance Statements (1)

OID .1.3.6.1.4.1.4526.10.10.2.1.1
The compliance statement for the DVMRP MIB.
Required groups
mandatory dvmrpGeneralGroup
mandatory dvmrpInterfaceGroup
mandatory dvmrpNeighborGroup
mandatory dvmrpRoutingGroup
mandatory dvmrpTreeGroup
optional dvmrpSecurityGroup This group is mandatory for agents which support both
authentication and privacy of SNMP messages, and only for
those network interfaces for which DVMRP is authenticating
neighbors.
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.4526.10.10.1.1.7.1
A dvmrpNeighborLoss trap signifies the loss of a 2-way
adjacency with a neighbor. This trap should be generated
when the neighbor state changes from active to one-way,
ignoring, or down. The trap should be generated only if the
router has no other neighbors on the same interface with a
lower IP address than itself.
.1.3.6.1.4.1.4526.10.10.1.1.7.2
A dvmrpNeighborNotPruning trap signifies that a non-pruning
neighbor has been detected (in an implementation-dependent
manner). This trap should be generated at most once per
generation ID of the neighbor. For example, it should be
generated at the time a neighbor is first heard from if the
prune bit is not set in its capabilities. It should also be
generated if the local system has the ability to tell that a
neighbor which sets the the prune bit in its capabilities is
not pruning any branches over an extended period of time.
The trap should be generated only if the router has no other
neighbors on the same interface with a lower IP address than
itself.