LAN-EMULATION-CLIENT-MIB Table View

A table describing all of the LAN Emulation Clients
implemented by this host.  Each LE Client has a row
in the MIB-II/RFC 1573 Interfaces table (describing
the emulated packet interface it presents to higher
layers).  Each LE Client also has a row in this and
other LEC MIB tables (describing its interface with
other LAN Emulation components).
This table contains configuration variables.  Three
extension tables contain client status, performance
statistics, and information about control/multicast
VCCs.
Unlike hardware ports, LE Clients can be created by
management.  However, the RFC 1573 Interfaces table
does not directly support row creation.  Therefore,
creating or deleting a row in the lecConfigTable is
defined to have the side effect of creating or
deleting corresponding rows in
          
    -  the MIB-II / RFC 1573 Interfaces table,
    -  the 'lecMappingTable',
    -  the 'lecStatusTable',
    -  the 'lecServerVccTable',
    -  the 'lecStatisticsTable', and
    -  any other dependent tables
New Interfaces table rows for LAN Emulation Clients
always have 'ifAdminStatus' set to 'down'.
          
A Note On Indexing:
-------------------
Most of the tables in this MIB are indexed in whole
or in part by 'lecIndex' - not by 'ifIndex'.
Why is there a separate index?
Traditionally, ifIndex values are chosen by agents,
and are permitted to change across restarts.  Using
ifIndex to index lecConfigTable could complicate
row creation and/or cause interoperability problems
(if each agent had special restrictions on ifIndex).
Having a separate index avoids these problems.

lecConfigEntry row .1.3.6.1.4.1.353.5.3.1.1.1.1

Each table entry contains configuration information
for one LAN Emulation Client.
Most of the objects are derived from Initial State
Parameters in the LAN Emulation specification.

Indexes

No indexes recorded

Column	Syntax	OID
lecIndexmandatory A value which uniquely identifies this conceptual row in the lecConfigTable. If the conceptual row identified by this value of lecIndex is recreated following an agent restart, the same value of lecIndex must be used to…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.1
lecRowStatusmandatory This object lets network managers create and delete LAN Emulation Clients, on systems that support this optional capability. It does not control Joins and Terminations; they are controlled by 'ifAdminStatus'. However, …	RowStatusr/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.2
lecOwnermandatory The entity that configured this entry and is therefore using the resources assigned to it.	OwnerStringr/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.3
lecConfigModemandatory Indicates whether this LAN Emulation Client should auto-configure the next time it is (re)started. In automatic(1) mode, a client uses a LAN Emulation Configuration Server to learn the ATM address of its LAN Emulation S…	Enumerationr/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.4
lecConfigLanTypemandatory C2c LAN Type (configured). The data frame format which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their Configure re…	LecDataFrameFormatr/w Type Values: 1 unspecified 2 aflane8023 3 aflane8025	.1.3.6.1.4.1.353.5.3.1.1.1.1.5
lecConfigMaxDataFrameSizemandatory C3c Maximum Data Frame Size (configured). The maximum data frame size which this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter …	LecDataFrameSizer/w Type Values: 1 unspecified 2 max1516 3 max4544 4 max9234 5 max18190	.1.3.6.1.4.1.353.5.3.1.1.1.1.6
lecConfigLanNamemandatory C5c ELAN Name (configured). The ELAN Name this client will use the next time it returns to the Initial State. Auto-configuring clients use this parameter in their Configure requests. Manu…	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.7
lecConfigLesAtmAddressmandatory C9 LE Server ATM Address. The LAN Emulation Server which this client will use the next time it is started in manual configuration mode. When lecConfigMode is 'automatic', there is no need to set this address, and no ad…	AtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.1.1.8
lecControlTimeoutmandatory C7 Control Time-out. Time out period used for timing out most request/response control frame interactions, as specified elsewhere [in the LAN Emulation specification]. This time value is expressed in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.9
lecMaxUnknownFrameCountmandatory C10 Maximum Unknown Frame Count. See the description of lecMaxUnknownFrameTime below.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.10
lecMaxUnknownFrameTimemandatory C11 Maximum Unknown Frame Time. Within the period of time defined by the Maximum Unknown Frame Time, a LE Client will send no more than Maximum Unknown Frame Count frames to the BUS for a given unicast LAN Destination,…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.11
lecVccTimeoutPeriodmandatory C12 VCC Time-out Period. A LE Client SHOULD release any Data Direct VCC that it has not used to transmit or receive any data frames for the length of the VCC Time-out Period. This parameter is only meaningful for SVC …	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.12
lecMaxRetryCountmandatory C13 Maximum Retry Count. A LE CLient MUST not retry a LE_ARP_REQUEST for a given frame's LAN destination more than Maximum Retry Count times, after the first LE_ARP_REQUEST for that same frame's LAN destination.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.13
lecAgingTimemandatory C17 Aging Time. The maximum time that a LE Client will maintain an entry in its LE_ARP cache in the absence of a verification of that relationship. This time value is expressed in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.14
lecForwardDelayTimemandatory C18 Forward Delay Time. The maximum time that a LE Client will maintain an entry for a non-local MAC address in its LE_ARP cache in the absence of a verification of that relationship, as long as the Topology Change fla…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.15
lecExpectedArpResponseTimemandatory C20 Expected LE_ARP Reponse Time. The maximum time that the LEC expects an LE_ARP_REQUEST/ LE_ARP_RESPONSE cycle to take. Used for retries and verifies. This time value is expressed in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.16
lecFlushTimeOutmandatory C21 Flush Time-out. Time limit to wait to receive a LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action. This time value is expressed in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.17
lecPathSwitchingDelaymandatory C22 Path Switching Delay. The time since sending a frame to the BUS after which the LE Client may assume that the frame has been either discarded or delivered to the recipient. May be used to bypass the Flush protocol…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.18
lecLocalSegmentIDmandatory C23 Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges. This object has been deprecated and replaced by a pair of Config/A…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.19
lecMulticastSendTypemandatory C24 Multicast Send VCC Type. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. This is the method to be used by the LE Client when specifying traffic parameters when it…	Enumerationr/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.20
lecMulticastSendAvgRatemandatory C25 Multicast Send VCC AvgRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Sustained Cell Rate to be requested by LE Client when setting up …	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.21
lecMulticastSendPeakRatemandatory C26 Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Peak Cell Rate to be requested by LE Client when setting up the …	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.22
lecConnectionCompleteTimermandatory C28 Connection Complete Timer. Optional. In Connection Establishment this is the time period in which data or a READY_IND message is expected from a Calling Party. This time value is expressed in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.1.1.23
lecConfigLecsAtmAddressmandatory LE Configuration Server ATM address. A manually-configured LECS address that this client may use in its attempts at auto-configuration.	AtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.1.1.24
lecInitialControlTimeoutmandatory C7i Initial Control Time-out. In LANE V2.0, control time-out consists of an initial time-out of C7i seconds, a retry multiplier (or logarithmic back-off base) of C7x, and a cumulative maximum time-out of…	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.25
lecControlTimeoutMultipliermandatory C7x Control Time-out Multiplier. In LANE V2.0, control time-out consists of an initial time-out of C7i seconds, a retry multiplier (or logarithmic back-off base) of C7x, and a cumulative maximum time-out…	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.26
lecV2MaxUnknownFrameCountmandatory C10 Maximum Unknown Frame Count. See the description of lecMaxUnknownFrameTime above. This object may be used with both LANE V1.0 clients & LANE V2.0 clients. For LANE V1.0 clients, this value should be…	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.27
lecConfigLocalSegmentIDmandatory C23c Local Segment ID (configured). The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges. A setting which this client will use the next time i…	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.28
lecConfigV2Capablemandatory C29c V2 Capable (configured). A setting which this client will use the next time it returns to the Initial State. Indicates whether this client is set up to behave as a LANE V2 client. …	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.1.1.29
lecConfigSelectiveMulticastmandatory C32c Selective Multicast (configured). A setting which this client will use the next time it returns to the Initial State. Indicates if this client is configured to register to receive spe…	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.1.1.30
lecForwardDisconnectTimeoutmandatory C33 Forward Disconnect Time-out If the LE Client detects that the BUS has had no Multicast Forward VCCs to the LE Client for time Forward Disconnect Time-out, the LE Client MUST disconnect from the BUS a…	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.31
lecConfigLLCMultiplexCapablemandatory C34c LLC Multiplex Capable (configured). A setting which this client will use the next time it returns to the Initial State. Gives a network manager an optional method to disable LLC multi…	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.1.1.32
lecMinReconfigureDelaymandatory C37 Minimum Reconfigure Delay. The minimum time that a LE client must wait before retrying reconfiguration. This setting must be less than or equal to lecMaxReconfigureDelay.	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.33
lecMaxReconfigureDelaymandatory C38 Maximum Reconfigure Delay. The maximum time that a LE client must wait before retrying reconfiguration. This setting must be greater than or equal to lecMinReconfigureDelay.	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.34
lecMaxBusConnectRetriesmandatory C39 Maximum BUS Connect Retries. The maximum number of times that a LE Client can try to establish the Default Multicast Send VCC before returning to the configuration procedure.	Integer32r/w	.1.3.6.1.4.1.353.5.3.1.1.1.1.35
lecTokenRingExplorerExcludemandatory C40 Token Ring Explorer Frame Exclude. This indicates whether or not the LE Client wishes to receive Token Ring explorer frames other than those directed to one of its registered MAC addresses. Normally,…	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.1.1.36

A read-only table containing identification, status,
and operational information about the LAN Emulation
Clients this agent manages.

lecStatusEntry row .1.3.6.1.4.1.353.5.3.1.1.2.1

Each table entry contains information about one LAN
Emulation Client.

Indexes

No indexes recorded

Column	Syntax	OID
lecIfIndexmandatory This object identifies the logical interface number ('ifIndex') assigned to this client, and is used to identify corresponding rows in the Interfaces MIB. Note that re-initialization of the management agent may cause a …	Integer32	.1.3.6.1.4.1.353.5.3.1.1.2.1.1
lecPrimaryAtmAddressmandatory C1 LE Client's ATM Addresses. The primary ATM address of this LAN Emulation Client. This address is used to establish the Control Direct and Multicast Send VCCs, and may also be used to set up Data Direct VCCs. A clien…	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.2.1.2
lecIDmandatory C14 LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppr…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.2.1.3
lecInterfaceStatemandatory The mandatory state of the LAN Emulation Client. Note that 'ifOperStatus' is defined to be 'up' when, and only when, 'lecInterfaceState' is 'operational'.	LecState Type Values: 1 initialState 2 lecsConnect 3 configure 4 join 5 initialRegistration 6 busConnect 7 operational	.1.3.6.1.4.1.353.5.3.1.1.2.1.4
lecLastFailureRespCodemandatory Status code from the last failed Configure response or Join response. Failed responses are those for which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame contains a non-zero code, or fails to arrive within a timeou…	Enumeration	.1.3.6.1.4.1.353.5.3.1.1.2.1.5
lecLastFailureStatemandatory The state this client was in when it updated the 'lecLastFailureRespCode'. If 'lecLastFailureRespCode' is 'none', this object has the value initialState(1).	LecState Type Values: 1 initialState 2 lecsConnect 3 configure 4 join 5 initialRegistration 6 busConnect 7 operational	.1.3.6.1.4.1.353.5.3.1.1.2.1.6
lecProtocolmandatory The LAN Emulation protocol which this client supports, and specifies in its LE_JOIN_REQUESTs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.2.1.7
lecVersionmandatory The LAN Emulation protocol version which this client supports, and specifies in its LE_JOIN_REQUESTs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.2.1.8
lecTopologyChangemandatory C19 Topology Change. Boolean indication that the LE Client is using the Forward Delay Time C18, instead of the Aging Time C17, to age non-local entries in its LE_ARP cache C16. For a client which is not connected to th…	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.2.1.9
lecConfigServerAtmAddressmandatory The ATM address of the LAN Emulation Configuration Server (if known) or the empty string (otherwise).	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.2.1.10
lecConfigSourcemandatory Indicates whether this LAN Emulation Client used the LAN Emulation Configuration Server, and, if so, what method it used to establish the Configuration Direct VCC. The value 'configInProgress' indicates c…	Enumeration	.1.3.6.1.4.1.353.5.3.1.1.2.1.11
lecActualLanTypemandatory C2 LAN Type. The data frame format that this LAN Emulation Client is using right now. This may come from * lecConfigLanType, * the LAN Emulation Configuration Server, or * the LAN Emulation Server This …	LecDataFrameFormat Type Values: 1 unspecified 2 aflane8023 3 aflane8025	.1.3.6.1.4.1.353.5.3.1.1.2.1.12
lecActualMaxDataFrameSizemandatory C3 Maximum Data Frame Size. The maximum data frame size that this LAN Emulation client is using right now. This may come from * lecConfigMaxDataFrameSize, * the LAN Emulation Configuration Server, or …	LecDataFrameSize Type Values: 1 unspecified 2 max1516 3 max4544 4 max9234 5 max18190	.1.3.6.1.4.1.353.5.3.1.1.2.1.13
lecActualLanNamemandatory C5 ELAN Name. The identity of the emulated LAN which this client last joined, or wishes to join. This may come from * lecConfigLanName * the LAN Emulation Configuration Server, or * the L…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.353.5.3.1.1.2.1.14
lecActualLesAtmAddressmandatory C9 LE Server ATM Address. The LAN Emulation Server address currently in use or most recently attempted. If no LAN Emulation Server attachment has been tried, this object's value is the zero-length string.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.2.1.15
lecProxyClientmandatory C4 Proxy. Indicates whether this client is acting as a proxy. Proxy clients are allowed to represent unregistered MAC addresses, and receive copies of LE_ARP_REQUEST frames for such addresses.	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.2.1.16
lecActualLocalSegmentIDmandatory C23 Local Segment ID. The segment ID of the emulated LAN. This is only required for IEEE 802.5 clients that are Source Routing bridges.	Integer32	.1.3.6.1.4.1.353.5.3.1.1.2.1.17
lecActualV2Capablemandatory C29 V2 Capable. If set, the LE Client must exhibit LANE v2 behavior where it differs in its requirements from LANE v1 behavior. If clear, the LE Client must exhibit LANE v1 behavior in those cases. Thi…	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.2.1.18
lecElanIDmandatory C31 ELAN-ID. The ELAN-ID to be used in all LANE LLC-multiplexed data frames sent or received by this client. This object takes the value 0 if the LES is a LANE V1.0 LES. The initial value of this objec…	Integer32	.1.3.6.1.4.1.353.5.3.1.1.2.1.19
lecActualSelectiveMulticastmandatory C32 Selective Multicast. This indicates whether or not the LE Client will register to receive specific multicast destination MAC addresses. If this flag is set, the LE Client MUST issue a LE_REGISTER_RE…	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.2.1.20
lecActualLLCMultiplexCapablemandatory C34 LLC Multiplex Capable. If set, this variable indicates that the LE Client can accept and process LLC-multiplexed Data Direct VCCs. If clear, it indicates that the LE Client will refuse to accept LLC…	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.2.1.21
lecPreferredLesAddressmandatory C35 Preferred LES Address. The ATM address of the preferred LE Server. This variable is set during the Configuration phase by copying the contents of the Preferred LES TLV received in the LE_CONFIGURE_R…	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.2.1.22
lecStoresServiceCategoriesmandatory Indicates whether or not the client saves Service Category TLV data from LE_ARP_RESPONSEs and makes it available through leArpTable and leRDArpTable.	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.2.1.23

A table mapping the 'ifIndex' values of 'aflane8023'
and 'aflane8025' interfaces to the 'lecIndex' values
of the corresponding LAN Emulation Clients.

lecMappingEntry row .1.3.6.1.4.1.353.5.3.1.1.3.1

Each row describes one ifIndex --> lecIndex mapping.

Indexes

No indexes recorded

Column	Syntax	OID
lecMappingIndexmandatory The 'lecIndex' of the client which implements the specified interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.3.1.1

An extension table containing traffic statistics for
all the LAN Emulation Clients this host implements.

lecStatisticsEntry row .1.3.6.1.4.1.353.5.3.1.1.4.1

Each row in this table contains traffic statistics
for one LAN Emulation client.

Indexes

No indexes recorded

Column	Syntax	OID
lecArpRequestsOutmandatory The number of LE_ARP_REQUESTs sent over the LUNI by this LAN Emulation Client.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.1
lecArpRequestsInmandatory The number of LE_ARP_REQUESTs received over the LUNI by this LAN Emulation Client. Requests may arrive on the Control Direct VCC or on the Control Distribute VCC, depending upon how the LES is implemented and the chance…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.2
lecArpRepliesOutmandatory The number of LE_ARP_RESPONSEs sent over the LUNI by this LAN Emulation Client.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.3
lecArpRepliesInmandatory The number of LE_ARP_RESPONSEs received over the LUNI by this LAN Emulation Client. This count includes all such replies, whether solicited or not. Replies may arrive on the Control Direct VCC or on the Control Dist…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.4
lecControlFramesOutmandatory The total number of control packets sent by this LAN Emulation Client over the LUNI.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.5
lecControlFramesInmandatory The total number of control packets received by this LAN Emulation Client over the LUNI.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.6
lecSvcFailuresmandatory The total number of * outgoing LAN Emulation SVCs which this client tried, but failed, to open; * incoming LAN Emulation SVCs which this client tried, but failed to establish; and * incoming LAN Emulation SVCs …	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.7
lecFlowFailuresmandatory The total number of * outgoing LLC-multiplexed LAN Emulation flows which this client tried, but failed, to open; * incoming LLC-multiplexed LAN Emulation flows which this client did…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.8
lecEchoDiscardsmandatory The number of incoming data frames which were thrown away because they were echo frames (e. g., copies of this client's own outgoing traffic). Such discards are a normal part of LAN Emulation and not a ca…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.9
lecFilteredMulticastsmandatory The number of incoming data frames which were thrown away by the client because they were for a multicast (or group) address upper-layer software didn't want. If this counter indicates that a LEC is being…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.1.1.4.1.10

A table identifying the Control and Multicast VCCs
for each LAN Emulation Client this host implements.

lecServerVccEntry row .1.3.6.1.4.1.353.5.3.1.1.5.1

Each row in this table describes the Control VCCs
and Multicast VCCs for one LAN Emulation client.

Indexes

No indexes recorded

Column	Syntax	OID
lecConfigDirectInterfacemandatory The interface associated with the Configuration Direct VCC. If no Configuration Direct VCC exists, this object has the value 0. Otherwise, the objects ( lecConfigDirectInterface, lecConfigDirectVpi, lecConfigDirectV…	LeConnectionInterface Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.1.1.5.1.1
lecConfigDirectVpimandatory If the Configuration Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.	VpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.1.1.5.1.2
lecConfigDirectVcimandatory If the Configuration Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.	VciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.1.1.5.1.3
lecControlDirectInterfacemandatory The interface associated with the Control Direct VCC. If no Control Direct VCC exists, this object has the value 0. Otherwise, the objects ( lecControlDirectInterface, lecControlDirectVpi, lecControlDirectVci ) identif…	LeConnectionInterface Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.1.1.5.1.4
lecControlDirectVpimandatory If the Control Direct VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.	VpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.1.1.5.1.5
lecControlDirectVcimandatory If the Control Direct VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.	VciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.1.1.5.1.6
lecControlDistributeInterfacemandatory The interface associated with the Control Distribute VCC. If no Control Distribute VCC has been set up to this client, this object has the value 0. Otherwise, the objects ( lecControlDistributeInterface, lec…	LeConnectionInterface Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.1.1.5.1.7
lecControlDistributeVpimandatory If the Control Distribute VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.	VpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.1.1.5.1.8
lecControlDistributeVcimandatory If the Control Distribute VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object contains the value 0.	VciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.1.1.5.1.9
lecMulticastSendInterfacemandatory The interface associated with the Multicast Send VCC. If no Multicast Send VCC exists, this object has the value 0. Otherwise, the objects ( lecMulticastSendInterface, lecMulticastSendVpi, lecMulticastSendV…	LeConnectionInterface Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.1.1.5.1.10
lecMulticastSendVpimandatory If the Multicast Send VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.	VpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.1.1.5.1.11
lecMulticastSendVcimandatory If the Multicast Send VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, this object has the value 0.	VciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.1.1.5.1.12
lecMulticastForwardInterfacemandatory For a LANE V1.0 client: ----------------------- The interface associated with the Multicast Forward VCC. If no Multicast Forward VCC has been set up to this client, this object has the value 0. Otherwise, the objects …	LeConnectionInterface Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.1.1.5.1.13
lecMulticastForwardVpimandatory For a LANE V1.0 client: ----------------------- If the Multicast Forward VCC exists, this object contains the VPI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi…	VpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.1.1.5.1.14
lecMulticastForwardVcimandatory For a LANE V1.0 client: ----------------------- If the Multicast Forward VCC exists, this object contains the VCI which identifies that VCC at the point where it connects to this LE client. Otherwise, thi…	VciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.1.1.5.1.15

A table listing all of the ATM addresses belonging
to this host's LAN Emulation Clients.

lecAtmAddressEntry row .1.3.6.1.4.1.353.5.3.1.1.6.1

Each row in this table describes one of a client's
ATM addresses.

Indexes

No indexes recorded

Column	Syntax	OID
lecAtmAddressmandatory The ATM address this row describes. This could be either a primary address or a secondary address.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.6.1.1
lecAtmAddressStatusmandatory Used to create and delete rows in this table. A management station may not change the status of a primary ATM address to 'notInService' or 'destroy' unless the client's ifAdminStatus is 'down', and the client's lecInter…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.6.1.2
lecAtmAddressMuxedmandatory Indicates what type(s) of connections the LEC is willing to establish at this ATM address.	Enumeration	.1.3.6.1.4.1.353.5.3.1.1.6.1.3

This table contains entries for all of the registered
MAC addresses belonging to this agent's LE clients.
C6  Local Unicast MAC Address(es).  Each LE Client has
zero or more local unicast MAC addresses.  In an
operational LE Client, every address in this
variable MUST have been registered with the LE
Server.  Two LE CLients joined to the same
emulated LAN MUST NOT have the same local unicast
MAC address.  A LE Client's MAC addresses may
change during normal operations.  When answering
a LE_ARP_REQUEST for any address in this list, the
'Remote Address' bit in the FLAGS field of the
LE_ARP_RESPONSE MUST be clear.

lecMacAddressEntry row .1.3.6.1.4.1.353.5.3.1.1.7.1

Each table row describes a (MAC address, ATM address)
pair registered for a particular client.

Indexes

No indexes recorded

Column	Syntax	OID
lecMacAddressmandatory A unicast MAC address which the LE client denoted by 'lecIndex' has registered with its LE Server.		.1.3.6.1.4.1.353.5.3.1.1.7.1.1
lecMacAddressAtmBindingmandatory The ATM address registered for 'lecMacAddress'.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.7.1.2
lecMacAddressMuxedAtmBindingmandatory The LLC-multiplexed ATM address, if any, registered for 'lecMacAddress'.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.7.1.3
lecMacAddressServiceCategorymandatory A bitmap describing the service categories which the LEC supports for this MAC address. The bitmap is larger than the LANE 2.0 specification requires, in case room is ever needed for expansion.	Integer32	.1.3.6.1.4.1.353.5.3.1.1.7.1.4

This table lists all of the Route Descriptors which
are registered by this host's LAN Emulation Clients.
C8  Route Descriptor(s).  Route Descriptors exist only
for source-routed IEEE 802.5 LE Clients that are
Source-Route Bridges.  All Route Descriptors in
any given emulated LAN MUST be unique.  A LE
Client MAY have zero or more Route Descriptors
and these Route Descriptors MAY change during
normal operation.  In an operational LE Client,
every Local Route Descriptor in C8 MUST have been
registered with the LE Server.  When answering a
LE_ARP_REQUEST for any address in this list, the
'Remote Address' bit in the FLAGS field of the
LE_ARP_RESPONSE MUST be clear.

lecRouteDescrEntry row .1.3.6.1.4.1.353.5.3.1.1.8.1

Each table row describes a (Route Descriptor, ATM
address) pair registered for a particular client.

Indexes

No indexes recorded

Column	Syntax	OID
lecRouteDescrSegmentIDmandatory The LAN ID portion of the IEEE 802.5 route descriptor associated with this conceptual row.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.8.1.1
lecRouteDescrBridgeNumbermandatory The Bridge Number portion of the IEEE 802.5 route descriptor associated with this conceptual row.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.8.1.2
lecRouteDescrAtmBindingmandatory The ATM address registered for the IEEE 802.5 route descriptor ('lecRouteDescrSegmentID', 'lecRouteDescrBridgeNumber').	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.8.1.3
lecRouteDescrMuxedAtmBindingmandatory The LLC-multiplexed ATM address, if any, registered for the IEEE 802.5 route descriptor ('lecRouteDescrSegmentID', 'lecRouteDescrBridgeNumber').	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.8.1.4
lecRouteDescrServiceCategorymandatory A bitmap describing the service categories which the LEC supports for this route descriptor. The bitmap is larger than the LANE 2.0 specification requires, in case room is ever needed for expansion.	Integer32	.1.3.6.1.4.1.353.5.3.1.1.8.1.5

This table provides access to an ATM LAN Emulation
Client's MAC-to-ATM ARP cache.  It contains entries
for unicast addresses and for the broadcast address,
but not for multicast MAC addresses.
C16 LE_ARP Cache.  A table of entries, each of which
    establishes a relationship between a LAN
    Destination external to the LE Client and the
    ATM address to which data frames for that LAN
    Destination will be sent.

leArpEntry row .1.3.6.1.4.1.353.5.3.1.1.9.1

An ATM LAN Emulation ARP cache entry containing
information about the binding of one MAC address
to one ATM address.

Indexes

No indexes recorded

Column	Syntax	OID
leArpMacAddressmandatory The MAC address for which this cache entry provides a translation. Since ATM LAN Emulation uses an ARP protocol to locate the Broadcast and Unknown Server, the value of this object could be the broadcast MAC address. M…		.1.3.6.1.4.1.353.5.3.1.1.9.1.1
leArpAtmAddressmandatory The ATM address of the Broadcast & Unknown Server or LAN Emulation Client whose MAC address is stored in 'leArpMacAddress'. This value may be determined through the use of the LE_ARP procedure, through source address le…	AtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.9.1.2
leArpIsRemoteAddressmandatory Indicates whether this entry is for a local or remote MAC address. In this context, 'local' means 'a MAC address that is local to the remote client', as opposed to 'one of my addresses'. true(1) The address is beli…	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.9.1.3
leArpEntryTypemandatory Indicates how this LE_ARP table entry was created and whether it is aged.	LeArpTableEntryTyper/w Type Values: 1 other 2 learnedViaControl 3 learnedViaData 4 staticVolatile 5 staticNonVolatile	.1.3.6.1.4.1.353.5.3.1.1.9.1.4
leArpRowStatusmandatory Lets users create and delete LE_ARP cache entries, on systems that support this capability. Normally clients will maintain their LE_ARP caches automatically. However, managers may occasionally want to create 'static' L…	RowStatusr/w	.1.3.6.1.4.1.353.5.3.1.1.9.1.5
leArpMuxedAtmAddressmandatory The LLC-multiplexed LE Client or Broadcast/Multicast Service ATM address corresponding to the MAC address 'leArpMacAddress'. This value may be determined through the use of the LE_ARP procedure, through s…	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.9.1.6
leArpServiceCategorymandatory A bitmap describing the service categories which the LEC 'lecIndex' supports. This value normally comes from the optional 'Service- Category' TLV in LANE 2.0 LE_ARP_RESPONSEs. The bitmap is…	Integer32	.1.3.6.1.4.1.353.5.3.1.1.9.1.7

This table provides access to an ATM LAN Emulation
Client's Route Descriptor-to-ATM ARP cache.
Implementation of this table is optional for hosts
that do not support emulated IEEE 802.5 Token Ring
LANs, and mandatory for hosts which do.
C16 LE_ARP Cache.  A table of entries, each of which
establishes a relationship between a LAN
Destination external to the LE Client and the
ATM address to which data frames for that LAN
Destination will be sent.

leRDArpEntry row .1.3.6.1.4.1.353.5.3.1.1.10.1

An ATM LAN Emulation ARP cache entry containing
information about the binding of one IEEE 802.5
route descriptor to one ATM address.

Indexes

No indexes recorded

Column	Syntax	OID
leRDArpSegmentIDmandatory The LAN ID portion of the IEEE 802.5 route descriptor associated with this ARP cache entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.10.1.1
leRDArpBridgeNumbermandatory The Bridge Number portion of the IEEE 802.5 route descriptor associated with this ARP cache entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.1.1.10.1.2
leRDArpAtmAddressmandatory The ATM address of the LAN Emulation Client which is associated with the route descriptor ('leRDArpSegmentID', 'leRDArpBridgeNumber'). This value may be determined through the use of the LE_ARP procedure, through sour…	AtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.10.1.3
leRDArpEntryTypemandatory Indicates how this LE_ARP table entry was created and whether it is aged.	LeArpTableEntryTyper/w Type Values: 1 other 2 learnedViaControl 3 learnedViaData 4 staticVolatile 5 staticNonVolatile	.1.3.6.1.4.1.353.5.3.1.1.10.1.4
leRDArpRowStatusmandatory Lets users create and delete LE_ARP cache entries, on systems that support this capability. Normally clients will maintain their LE_ARP caches automatically. However, managers may occasionally want to create 'static' L…	RowStatusr/w	.1.3.6.1.4.1.353.5.3.1.1.10.1.5
leRDArpMuxedAtmAddressmandatory The LLC-multiplexed ATM address of the LAN Emulation Client which is associated with the route descriptor ('leRDArpSegmentID', 'leRDArpBridgeNumber'). This value may be determined through the use of the L…	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.1.1.10.1.6
leRDArpServiceCategorymandatory A bitmap describing the service categories which the LEC 'lecIndex'supports. This value normally comes from the optional 'Service- Category' TLV in LANE 2.0 LE_ARP_RESPONSEs. The bitmap is …	Integer32	.1.3.6.1.4.1.353.5.3.1.1.10.1.7
leRDArpIsRemoteDescriptormandatory Indicates whether this entry is for a local or remote route descriptor. In this context, 'local' means 'a route descriptor that is local to the remote client', as opposed to 'one of my route descriptors'.…	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.353.5.3.1.1.10.1.8

A table identifying Multicast Forward VCCs for LAN
Emulation Version 2.0 clients.

lecMcForwardEntry row .1.3.6.1.4.1.353.5.3.1.1.11.1

Each row represents one Multicast Forward VCC.

Indexes

No indexes recorded

Column	Syntax	OID
lecMcForwardInterfacemandatory The interface associated with the Multicast Forward VCC.	LeConnectionInterface Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.1.1.11.1.1
lecMcForwardVpimandatory The VPI which identifies the Multicast Forward VCC at the point where it connects to the LANE client.	VpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.1.1.11.1.2
lecMcForwardVcimandatory The VCI which identifies the Multicast Forward VCC at the point where it connects to the LANE client.	VciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.1.1.11.1.3
lecMcForwardVerificationmandatory Indicates whether the calling address for this VCC has been verified. none - No verification implicit - Calling party address was same as BUS address …	Enumeration	.1.3.6.1.4.1.353.5.3.1.1.11.1.4

This table provides a place for an agent to store
interesting TLVs associated with
          
    o  Registered LAN destinations
          
    o  LE_ARP entries
          
    o  Query results from the LE_ARP response group
          
    o  Initialization / configuration
          
and any other categories the ATM Forum adds.
          
Unless otherwise stated,
          
    o  Entries in this table are completely optional.
          
    o  An implementation may choose to keep only the
       TLVs which are 'interesting' to its designers,
       such as MPOA TLVs in LE_ARP_RESPONSEs.
          
    o  TLVs which already have their own MIB objects
       should not be duplicated here.
          
    o  Where write / create access is allowed, it is
       not mandatory.
          
Implementors should document the specific lecTlvTable
features of their agent.

lecTlvEntry row .1.3.6.1.4.1.353.5.3.1.1.13.1

Each table row describes one TLV of a related set.

Indexes

No indexes recorded

Column	Syntax	OID
lecTlvSetIndexmandatory An index which helps to identify a set of TLVs, and to indicate their purpose. The value of this index defines the interpretation and use of corresponding table rows as follows: layer3T…	Enumeration	.1.3.6.1.4.1.353.5.3.1.1.13.1.1
lecTlvLanDestinationmandatory The MAC address or route descriptor associated with the TLV (see the description of the lecTlvSetIndex), encoded in the fashion defined in the LANE 2.0 LUNI specification (Table 16). To recap: The first …	OctetString	.1.3.6.1.4.1.353.5.3.1.1.13.1.2
lecTlvIndexmandatory An arbitrary index which allows a set to contain multiple TLVs.	Integer32	.1.3.6.1.4.1.353.5.3.1.1.13.1.3
lecTlvTypemandatory A four-octet string indicating this item's type. It consists of a three-octet OUI, followed by an octet identifying one of the organization's TLVs.	OctetString	.1.3.6.1.4.1.353.5.3.1.1.13.1.4
lecTlvValuemandatory The value - and, implicitly, the length - of the TLV.	OctetString	.1.3.6.1.4.1.353.5.3.1.1.13.1.5
lecTlvRowStatusmandatory Provides a way for network managers to create and delete rows in the TLV table.	RowStatus	.1.3.6.1.4.1.353.5.3.1.1.13.1.6