CONFIG-MIB Table View

Table of configuration attributes common to all SNMP agents in hubs.

chGenAgEntry row .1.3.6.1.4.1.81.7.9.1.1

An entry in the table, containing configuration attributes for a single agent.

Indexes

chGenAgId

Column	Syntax	OID
chGenAgIdmandatory Agent index for identifying the agent. Takes the value of the slot number where the agent card is inserted. For box agents which are not managed as Group the value of chGenAgId is chNumberOfSlots+1. For box agents which…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.81.7.9.1.1.1
chGenAgTypemandatory Defines the type of the card whose management attributes are described by the SNMP agent.	Enumeration Enumerated Values: 1 nma1-et 2 nma1-et-e 3 nma1-tr 4 nma2-et 5 nma2-tr 6 nma2-fddi 7 ielb 8 itlb 9 lts16 10 ierp 11 iefn 12 itfn 13 sh-ema 14 nma-rt 15 sh-tma 16 nma-re 17 ietlb 18 nma2-fddi-rad 19 iefr-mc 20 iefr-utp 21 ieqr 22 iere 23 itre 24 las 26 lsa 27 lsf100 28 nma-rs 29 lea 30 itrp 31 ls3ls 32 visageNMA 33 fat-pipe-fddi 34 visage16200 35 visage16TR 36 visage16155 39 lsa2 40 m-spv 41 m-mls 42 m-atm 43 m-spx 44 cajunP120 45 cajunP330 46 m-sps-T 47 m-sps-ER 48 m-sps-EB 49 cajunP122 50 cajunP333R 51 cajunX330ATM 52 cajunP130 53 m-acc 54 cajunP332-ML 55 cajunP333RLB 56 c-Hawk 57 x330wan 58 avayaC460 59 avayaC460L3 60 avayaC360 61 avayaC360L3 62 avayaW310 63 avayaW310L3 255 unknown	.1.3.6.1.4.1.81.7.9.1.1.2
chGenAgMgmtIfTypemandatory This attribute describes one of the interfaces of agents existing on modules and their type. Value 'none' defines the lack of an interface whose type is recognized by the management console. Any other value defines …	Enumeration Enumerated Values: 1 none 2 regular1822 3 hdh1822 4 ddn-x25 5 rfc877-x25 6 ethernet-csmacd 7 iso88023-csmacd 8 iso88024-tokenBus 9 iso88025-tokenRing 10 iso88026-man 11 starLan 12 proteon-10MBit 13 proteon-80MBit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 t1-carrier 19 cept 20 basicIsdn 21 primaryIsdn 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet-3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 59 aflane8023 255 ip	.1.3.6.1.4.1.81.7.9.1.1.3
chGenAgAddrmandatory This attribute defines an unique address by which the agent may be addressed by the management console. The address format should be consistent with the type defined by chGenAgMgmtIfType.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.81.7.9.1.1.4
chGenAgSpecificOIDmandatory This attribute provides the OID of another group containing additional more specific information regarding this instance.	ObjectIdentifier	.1.3.6.1.4.1.81.7.9.1.1.5
chGenAgSLIPAddressmandatory IP address of the SLIP channel of the agent	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.7.9.1.1.6
chGenAgTypeNamemandatory String with the Agent name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.81.7.9.1.1.7
chGenAgEntMngVersionmandatory The entity management version supported by the specific Agent. In the format: X.Y.Z (using numbers): 1st byte - major version number 2nd byte - '.' 3rd byte - minor version number 4th byte - '.' 5th byte - debug ve…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.1.1.8
chGenAgIpAddrmandatory This attribute defines the Ip address by which the agent may be addressed by the management console. For NMA-RX this should include the IP address of the Side Band interface.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.7.9.1.1.9
chGenAgResetmandatory This attribute asks that the agent with the specified index reset itself, according to the value of the enum	Enumerationr/w Enumerated Values: 0 noReset 1 warmReset 2 coldReset 3 resetAndSwitchToBackupBank	.1.3.6.1.4.1.81.7.9.1.1.10

Table of configuration attributes of  SNMP box agents in hubs.

chLntAgEntry row .1.3.6.1.4.1.81.7.9.2.1

An entry in the table, containing configuration attributes for a single box agent.

Indexes

chLntAgId

Column	Syntax	OID
chLntAgIdmandatory Agent index for identifying the agent. Identical to the index in chGenAgTable for the described agent.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.81.7.9.2.1.1
chLntAgSLIPAddressmandatory IP address of the SLIP channel of the agent	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.7.9.2.1.2
chLntAgSWVersionmandatory ASCII string for description and display of the agent software version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.2.1.3
chLntAgKernelVersionmandatory ASCII string for description and display of the agent operating system (kernel) version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.2.1.4
chLntAgCoprocSWVersionmandatory ASCII string describing the software version of the agent's coprocessor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.2.1.5
chLntAgSWFaultmandatory System fault emitted by agent software. It covers faults detected by the agent operating system and drivers. EnterpriseSpecific traps mechanism is used for transfering these traps to the management system.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.2.1.6
chLntAgMgmtBusSelectionmandatory Attribute describing the number of the bus on which management data are reported.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.9.2.1.7
chLntAgCoprocCommStatusmandatory Attribute describing the status of the communication between the agent and its coprocessor.	Enumeration Enumerated Values: 1 ok 2 commProblems 3 timeout 255 notSupported	.1.3.6.1.4.1.81.7.9.2.1.8
chLntAgCommDebugModeobsolete Attribute describing the agent mode in which communication problem traps are sent to managers (value 'on') or are not sent to managers (value 'off').	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.81.7.9.2.1.9
chLntAgConfigChangeTrapsmandatory The value of this attributes determines whether or not the agent sends Configuration Change traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.10
chLntAgFaultTrapsmandatory The value of this attributes determines whether or not the agent sends Fault traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.11
chLntAgTrafficThreshTrapsmandatory The value of this attributes determines whether or not the agent sends Traffic Threshold traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.12
chLntAgGroupEnrollDeenrollTrapsmandatory The value of this attributes determines whether or not the agent sends Group Enrollment and Group Deenrollment traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.13
chLntAgSoftFaultTrapsmandatory The value of this attributes determines whether or not the agent sends Software Fault traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.14
chLntAgHubEnrollTrapsobsolete The value of this attributes determines whether or not the agent sends periodic Hub Enrollment traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.15
chLntAgTempThreshTrapsmandatory The value of this attributes determines whether or not the agent sends Temperature Threshold traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.16
chLntAgSpecificOIDmandatory This attribute provides the OID of another group containing additional more specific information regarding this instance.	ObjectIdentifier	.1.3.6.1.4.1.81.7.9.2.1.17
chLntAgLastAddrConfigobsolete Configuration attribute describing the last physical address detected at each port. Coded in internal application format.	OctetString	.1.3.6.1.4.1.81.7.9.2.1.18
chLntAgSecAddrConfigobsolete Configuration attribute describing the configuration of the secure addresses. Coded in internal application format.	OctetString	.1.3.6.1.4.1.81.7.9.2.1.19
chLntAgSoftwareStatusmandatory Describes configuration of the firmware on this agent. unLoadable(1) - is returned by agents which do not support the Software Download feature; loaded(2) - is returned by agents with loaded software; downLoading(3) - w…	Enumerationr/w Enumerated Values: 1 unLoadable 2 loaded 3 downLoading 4 downLoadOfDownload 255 notSupported	.1.3.6.1.4.1.81.7.9.2.1.20
chLntAgConfigurationSymbolmandatory Defines the Configuration Symbol attached to any hardware module manufactured. One single character A..Z defines the CS version. For older modules which did not support this option on SNMP character '*' will be returned.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.81.7.9.2.1.21
chLntAgIntTempmandatory Internal temperature measured by the temperature sensor placed on the agent card. Expressed in Celsius degrees.Value '999' means not supported.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.9.2.1.22
chLntAgBootVersionmandatory ASCII string for description and display of the agent boot software version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.2.1.23
chLntAgSensorFaultobsolete A code of a sensor fault discovered by the agent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.9.2.1.24
chLntAgSensorFaultTrapsobsolete This attribute enables/disables generation of the sensor fault trap.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.25
chLntAgInterProcFaultobsolete A code of intercommunication fault between Main - Master processors.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.9.2.1.26
chLntAgInterProcFaultTrapsobsolete This attribute enables/disables generation of the intercommunication fault trap.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.27
chLntAgPSUVoltThrsTrapsmandatory The value of this attribute determines whether or not the agent sends PSU voltage threshold traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.28
chLntAgHardwareVersionmandatory ASCII string for description and display of the agent hardware version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.2.1.29
chLntAgSoftwareDscrmandatory ASCII string for description and display of the agent software information.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.2.1.30
chLntAgCAMChangeTrapsmandatory The value of this attribute determines whether or not the agent sends CAM last change traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.2.1.31
chLntAgAppVersionmandatory ASCII string for description and display of the agent's application version. e.g. software running top of the Kernel	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.9.2.1.32

Table of permanent managers.
The Agent will send Traps to managers listed in the 
chLntAgPermMngrTable. A Trap will be send to the manager
according to the Trap Enable/Disable flag related to the Trap. 
A permanent manager will be defined by the user, through the 
Agent setup procedure, or by SNMP request.

chLntAgPermMngrEntry row .1.3.6.1.4.1.81.7.9.3.2.1

An entry in the permanent managers table.

Indexes

chLntAgPermMngrId

Column	Syntax	OID
chLntAgPermMngrIdmandatory Index in the permanent managers table. It ranges from 1 to chLntAgMaxNmbOfMngrs	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.7.9.3.2.1.1
chLntAgPermMngrAddrmandatory IP address of a permanent manager.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.7.9.3.2.1.2
chLntAgMngrTrapsmandatory Value 'on' indicates that SNMP agent should send SNMP traps (traffic excluded) to the manager.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.81.7.9.3.2.1.3

Remote networks table.

chLntAgRmtNetEntry row .1.3.6.1.4.1.81.7.9.3.4.1

Entry in the remote networks table.

Indexes

chLntAgRmtNetId

Column	Syntax	OID
chLntAgRmtNetIdobsolete Index of a remote network. It ranges from 1 to chLntAgMaxNmbOfNets.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.7.9.3.4.1.1
chLntAgRmtNetAddrobsolete Address of a remote network. The host portion is always 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.7.9.3.4.1.2
chLntAgRmtNetMaskobsolete Subnet mask for the remote network.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.7.9.3.4.1.3

Table of traps for each permanent manager.
A Trap will be send to the manager according to the Trap
Enable/Disable flag related to the Trap ID. 
When adding a new manager to the permanent managers
table, the Agent will set its entry in this table with the
default value for each trap flag.

chLntAgTrapsEntry row .1.3.6.1.4.1.81.7.9.3.7.1

An entry in the permanent managers table.

Indexes

chLntAgPermMngrId chLntAgTrapsId

Column	Syntax	OID
chLntAgTrapsPermMngrIdmandatory Index in the permanent managers traps table. It ranges from 1 to chLntAgMaxNmbOfMngrs	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.9.3.7.1.1
chLntAgTrapsIdmandatory The trap number is the second index in the table. The following list conclude the available traps numbers to be configured by the manager: 1: Configuration Change Traps. Default = enabled(1). 2: Fault Traps. Default = e…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.7.9.3.7.1.2
chLntAgTrapsEnableFlagmandatory The value of this attributes determines whether or not the agent sends the traps to the manager.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.7.9.3.7.1.3

Table of configuration attributes for Power Supply Units.
This table can be retrieved only from agents equipped with adequate hardware.

chHWPSUEntry row .1.3.6.1.4.1.81.7.11.1.1

An entry in the table, containing configuration attributes for a single
Power Supply Unit.

Indexes

chHWPSUId

Column	Syntax	OID
chHWPSUIdmandatory PSU index for identifying the PSU. The index for each hub: Stackable: odd number - internal, even number - backup LET 36: 1 - lower; 2 - higher, LET 20: 1 - right; 2 - left, LET 10: 1 - main; 2 - backup. …	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.81.7.11.1.1.1
chHWPSUActivityStatusmandatory This attribute defines the status of the PSU in what concerns supplying power to the chassis. NotActive(1) - indicates a disabled or defective PSU which cannot supply power to the chassis. Dormant(2) - indicates a f…	Enumeration Enumerated Values: 1 notActive 2 dormant 3 active 4 failed 5 unknown 6 notExist 7 noBackupPS	.1.3.6.1.4.1.81.7.11.1.1.2
chHWPSULocationmandatory Describes the location of the PSU: LET-36: lower, upper. LET-20: right, left. LET-10: unknown.	Enumeration Enumerated Values: 1 other 2 internal 3 external 4 right 5 left 6 lower 7 upper 8 unknown 9 notExist 10 middle	.1.3.6.1.4.1.81.7.11.1.1.3
chHWPSUVoltagemandatory Indicates voltage of PSU expressed in milliVolts.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.1.1.4
chHWPSUVoltHighThreshmandatory Indicates voltage High threshold of the PSU in the HUB. The PSU output working voltage needed to support a module in the HUB should be V +/- 5%. This value is hard-coded. The Agent will Trap the manager when the PSU wi…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.1.1.5
chHWPSUVoltLowThreshmandatory Indicates voltage Low threshold of the PSU in the HUB. The PSU output working voltage needed to support a module in the HUB should be V +/- 5%. This value is hard-coded. The Agent will Trap the manager when the PSU wil…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.1.1.6
chHWPSUCapacitymandatory Indicates the maximum of electrical power of PSU expressed in milliWatts.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.1.1.7
chHWPSUConsumptionmandatory Indicates the consumption of electrical power of PSU expressed in milliWatts.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.1.1.8
chHWPSUTypemandatory Attribute describing the type of the PSU.	Enumeration Enumerated Values: 1 avayaC460-MPS4603-AC 2 avayaC460-MPS4610-AC 255 unknown	.1.3.6.1.4.1.81.7.11.1.1.9
chHWPSUTypeNamemandatory String with the power supply name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.81.7.11.1.1.10
chHWPSUDescrmandatory Descriptor of the PSU in ASCII format.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.11.1.1.11
chHWPSUPoECapacitymandatory Indicates the maximum PoE power in milliwatts provided by this PSU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.1.1.12
chHWPSUPoEConsumptionmandatory Indicates the PoE power consumption in milliwatts drawn from this PSU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.1.1.13

Table of configuration attributes for power
management.

chHWPowerEntry row .1.3.6.1.4.1.81.7.11.6.1.1

Indexes

chHWPowerSlotId

Column	Syntax	OID
chHWPowerSlotIdmandatory Index, which identifies the slot inside the chassis for which this entry contains information. The number of entries in this table is equal to chNumberOfSlots.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.81.7.11.6.1.1.1
chHWPowerModTypemandatory Attribute describing the type of the module. Values in this attribute are the same as genGroupType but applicable also for un-powered modules and empty slots.	Enumeration Enumerated Values: 254 emptySlot 255 unknown 2600 avayaC460-M460ML-SPV 2601 avayaC460-M4648ML-T 2602 avayaC460-M4648ML-T-2G 2603 avayaC460-M4612ML-G 2604 avayaC460-M4648ML-T-PWR 2605 avayaC460-M4648ML-T-PWR-2G	.1.3.6.1.4.1.81.7.11.6.1.1.2
chHWPowerModTypeNamemandatory String with the module name the same as genGroupTypeName but applicable also for un-powered modules and empty slots.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.81.7.11.6.1.1.3
chHWPowerActivemandatory This object has a value of yes(1) if the module installed in this slot is powered up. This object has a value of no(2) when the module is powered down or the slot is empty.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.81.7.11.6.1.1.4
chHWPowerEnablemandatory Setting the value of this attribute to enable(1) enables the power for this slot. When this attribute is set to disable(2), the power for this slot is disabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.7.11.6.1.1.5
chHWPowerHistorymandatory This object has a value of yes(1) if the module installed in this slot has power history. This object has a value of no(2) when the module has not power history. Modules with power history …	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.81.7.11.6.1.1.6
chHWPowerDemandmandatory Indicates total electrical power consumption for the module installed in this slot expressed in milliWatts. Returns zero if the slot is empty.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.6.1.1.7
chHWPowerPrioritymandatory This parameter controls the powering priority of the module and is used by power budget management algorithm.	Enumerationr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.81.7.11.6.1.1.8
chHWPowerPoEBudgetmandatory This parameter indicates the PoE budget in milliwatts allocated for this module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.6.1.1.9
chHWPowerPoEDemandmandatory This parameter indicates the PoE power consumption in milliwatts for this module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.11.6.1.1.10

A table containing the parameters that define the alarm policies.

alarmPolicyEntry row .1.3.6.1.4.1.81.7.13.1.1

An entry that contains the definition of an alarm: threshold
value, threshold type (rising/falling), sample time interval,
sample type (delta or absolute value), and action policy.

Indexes

alarmPolicyIndex

Column	Syntax	OID
alarmPolicyIndexmandatory The value of this object identifies the alarmPolicy. It is also used in the VariableTable as a pointer from the sampled OID to the alarmPolicy defined on that item. This item uniquely identifies the policy and has a …	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.7.13.1.1.1
alarmPolicyParameterOIDmandatory This variable defines the type of variable that this policy monitors. The value of the item is an non-instanciated OID from the following list: - chHWPeakIntTemp. - ethPortFramesReceivedOK. - ethPortRunts. - ethP…	ObjectIdentifierr/w	.1.3.6.1.4.1.81.7.13.1.1.2
alarmPolicyRisingFallingmandatory This value defines whether the policy is a rising alarm or a falling alarm. If the value of this item is rising(1), then the actionPolicy is executed if the value of the sampled variable is larger than the threshold. I…	Enumerationr/w Enumerated Values: 1 rising 2 falling	.1.3.6.1.4.1.81.7.13.1.1.3
alarmPolicyThresholdValuemandatory The threshold value of the alarmPolicy. If the reading of the sampled instance (according to the alarmPolicyType: delta or absolute value) is above or below the value of this item (according to alarmPolicyRisingFallin…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.13.1.1.4
alarmPolicySampleTimeIntervalmandatory The time interval between two subsequent samples of the data, in seconds. All instances that are assigned to this policy are sampled once every TimeInterval. The value of this item must be a multiple of 10 and smalle…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.13.1.1.5
alarmPolicySampleTypemandatory This item defines the type of sample that is compared to the threshold. If the value of this item is delta(1), then the threshold is compared to the difference between every two consecutive samples of the variable. I…	Enumerationr/w Enumerated Values: 1 delta 2 absoluteValue	.1.3.6.1.4.1.81.7.13.1.1.6
alarmPolicyActionPolicymandatory This item defines the action taken by the agent upon detection of a variable larger or smaller than threshold (according to the value of alarmPolicyRisingFalling). If the value is trap(1) a trap is sent to all manage…	Enumerationr/w Enumerated Values: 1 trap 2 trapAndDisconnectPort 3 none	.1.3.6.1.4.1.81.7.13.1.1.7
alarmPolicyBitmapmandatory This item describes the relationship between the policy table and the variable table. It is coded in proprietary coding.	OctetString	.1.3.6.1.4.1.81.7.13.1.1.8
alarmPolicyStatusmandatory This variable defines the status of the row. The values of this variables are defined and handled, according to the definitions in the IETF draft: Row creation with SNMPv1, from 19 October 1993. The createAndGo value …	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 notReady 4 createAndWait 5 destroy	.1.3.6.1.4.1.81.7.13.1.1.9

This table contains the instances to be sampled by the agent 
and a pointer to the relevant policy in the policyTable for each instance.

variableEntry row .1.3.6.1.4.1.81.7.13.3.1

An entry that contains a single variable and the pointer to the
policy by which it is monitored.

Indexes

variablePolicy variableInstance1 variableInstance2

Column	Syntax	OID
variablePolicymandatory This item points to the alarm policy that is executed on the variable defined in this row. There is no limitation on the number of variables that are assigned a given policy. It is possible to create rows in the vari…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.7.13.3.1.1
variableInstance1mandatory This item defines the first index of the variable to be sampled. The combination of this item with variableInstance2 and with the alarmPolicyParameterOID (pointed to by variablePolicy) defines the instance to be samp…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.7.13.3.1.2
variableInstance2mandatory This item is the second index of the variable to be sampled.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.7.13.3.1.3
variableStatusmandatory This variable defines the status of the row. The values of this variables are defined and handled, according to the definitions in the IETF draft: Row creation with SNMPv1, from 19 October 1993. The createAndGo value …	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 notReady 4 createAndWait 5 destroy	.1.3.6.1.4.1.81.7.13.3.1.4

Table describing all the reset occurrences in a switch, 
doubly indexed by the group number and the sequential number of the reset event

chLogFileEntry row .1.3.6.1.4.1.81.7.22.1

An entry in the table, containing data on a single reset event that occurred to a single group.

Indexes

chLogFileGroupId chLogFileIndex

Column	Syntax	OID
chLogFileGroupIdmandatory Index which identifies the group or slot number.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.81.7.22.1.1
chLogFileIndexmandatory Index which identifies the sequential number of a reset event. Index #1 always represents the last recent reset event that occurred. Every new reset event causes a shift in the table entries. When the maximum storage ca…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.7.22.1.2
chLogFileNamemandatory An enumeration which identifies the type of the log file we fetch.	Enumeration Enumerated Values: 1 reset 255 other	.1.3.6.1.4.1.81.7.22.1.3
chLogFileAbsoluteTimemandatory Absolute time in seconds at which the reset occurred. The absolute time is retrieved by the Agent from the net, in a standard format. In the case where the reset occurred before the Agent was already able to retrieve th…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.7.22.1.4
chLogFileMessagemandatory Readable text message, which will contain a full description of the reset event and its cause.	OctetString Constraints: range: 0-600	.1.3.6.1.4.1.81.7.22.1.5
chLogFileEncryptedMessagemandatory Encrypted message saved in the Flash memory, which will contain a full description of the reset event, that is understandable to the Technician only.	OctetString Constraints: range: 0-600	.1.3.6.1.4.1.81.7.22.1.6

This table controls the stackHealth verification procedure -
cascading modules and cables integrity test.

chStackHealthEntry row .1.3.6.1.4.1.81.7.24.1

Indexes

chStackHealthGroupId

Column	Syntax	OID
chStackHealthGroupIdmandatory The module number	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.81.7.24.1.1
chStackHealthTxDstModulemandatory The test destination module	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.24.1.2
chStackHealthTxPktLenmandatory The size of the UDP test packets	Integer32r/w Constraints: range: 28-1500	.1.3.6.1.4.1.81.7.24.1.3
chStackHealthTxDirectionmandatory The direction for sending test frames.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.81.7.24.1.4
chStackHealthTxmandatory The number of packet to send. When greater than zero, the agent at module chStackHealthGroupID send a UDP packet to chStackHealthTxModule, port 5090, size chStackHealthTxPktLen via cascading port stackHealthTxPhyPort. …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.24.1.5
chStackHealthRxmandatory This item counts the number of received packets.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.7.24.1.6
chStackHealthRxListenmandatory When set to start(1) the subagent start listening on UDP port 5090. Writing to this item resets stackHealthRx. When set to stop(2), the agent close the UDP port.	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.81.7.24.1.7
chStackHealthTxDstAddressmandatory The test destination module address	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.81.7.24.1.8

This table contains entries for each slot
in the chassis intended for installation
of the supervisor's.

chSpvEntry row .1.3.6.1.4.1.81.7.25.1.1

Indexes

chSpvId

Column	Syntax	OID
chSpvIdmandatory Identifies the SPV's slot number.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.81.7.25.1.1.1
chSpvStatusmandatory Indicates the status of the SPV: active(1) - the SPV operates as master SPV standby(2) - the SPV may replace the active SPV in case of failure. halted(3) - the SPV is unable to act as a standb…	Enumeration Enumerated Values: 1 active 2 standby 3 halted 4 warmReset 5 inElection 255 unknown	.1.3.6.1.4.1.81.7.25.1.1.2
chSpvSyncStatusmandatory Indicates whether SPV is synchronized with the chassis.	Enumeration Enumerated Values: 1 yes 2 no 255 unknown	.1.3.6.1.4.1.81.7.25.1.1.3
chSpvEwVersionmandatory Describes the version number of Embedded Web software.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.25.1.1.4
chSpvBankASwVersionmandatory Describes the version number of software contained in Bank A.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.25.1.1.5
chSpvBankBSwVersionmandatory Describes the version number of software contained in Bank B.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.25.1.1.6
chSpvBankPrefmandatory Indicates which bank is preferred for boot up.	Enumeration Enumerated Values: 1 bankA 2 bankB 255 unknown	.1.3.6.1.4.1.81.7.25.1.1.7
chSpvSerialNumbermandatory Describes SPV's serial number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.25.1.1.8
chSpvConfigurationSymbolmandatory Describes SPV's Configuration Symbol.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.25.1.1.9
chSpvRunningSwVersionmandatory Describes the SPV's running software version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.7.25.1.1.10
chSpvBootedFrommandatory Indicated from which bank SPV was booted.	Enumeration Enumerated Values: 1 bankA 2 bankB 3 network 255 unknown	.1.3.6.1.4.1.81.7.25.1.1.11

Table of configuration attributes for managed  modules.
Includes configuration data which are independent of the 
specific functionality of the module.

genGroupEntry row .1.3.6.1.4.1.81.8.1.1

An entry in the table, containing data about a single group.

Indexes

genGroupId

Column	Syntax	OID
genGroupIdmandatory Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by which the group is accessed. This value is never greater than chNumberOfSlots.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.81.8.1.1.1
genGroupSWVersionmandatory ASCII string for description and display of the group software version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.8.1.1.2
genGroupKernelVersionmandatory ASCII string for description and display of the group kernel version.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.8.1.1.3
genGroupTypemandatory Attribute describing the type of the group (module).	Enumeration Enumerated Values: 1 le10b 2 le10b-2 3 le10c 4 le10c-2 5 le15 6 le15-2 7 le20 8 le30x 9 le30x-2 10 le30xd 11 le40x 12 le40xt 13 ltr4-RJ45 14 ltr4-D9 15 ltr4-D25 16 ltr4-FO 19 ltrio-RJ45 20 ltrio-D9 21 ltrio-D25 22 ltrio-FO 23 ltrio-Con1 24 ltrio-Con2 25 le10b-2r 26 le10c-2r 27 le80xt 28 le140xt 29 ielb 30 ltrf4 31 ltrf16 32 lts16 33 le20n 34 ltr104-RJ45 35 le20r 36 llt8 37 le20s 38 le10b2n 39 ltr104-D9 40 ltr104-D25 41 ltrt-RJ45 42 ltrt-D9 43 ltr104f 44 itlb 45 le140xtf 46 le120r 47 le120r-2 48 le140xtc 49 le110b 50 le110bq 51 lcl100 52 le140xtq 53 le20n-fb 54 le20s-fb 55 le140xtf-fb 56 ltr104s 57 lert40-AUI 58 lert40-10BASET 59 lfd104-mic 60 lfd104-stm 61 lfd104-stl 62 lfd104-stp 63 lfd104-utp 64 lfd102-mic 65 lfd102-stm 66 lfd102-sts 67 le140xtn 68 ltr104a 69 le120q 70 le120sq2 71 le120sq5 72 le120q-fb 73 le120sq2-fb 74 le120sq5-fb 75 ltr108t 76 ltr108f 77 lse808 78 lhs 80 iefn 81 itfn 86 ierp 87 lse108 88 lse208 89 le110cq 90 itre2 92 sh-e16 93 le115q 94 sh-t16 95 sh-e8 96 lhb 97 sh-efn 98 sh-tfn 100 lace100 101 le140xts 102 le40xtn 103 le80xtn 104 itrp 105 lfd104-lcf 106 lfd104-sts 107 lfd102-lcf 108 lfd102-stl 109 lfd102-stp 110 lfd102-utp 111 phy4-mic 112 phy4-stm 113 phy4-stl 114 phy4-stp 115 phy4-utp 116 phy4-lcf 117 phy4-sts 118 phy2-mic 119 phy2-stm 120 phy2-stl 121 phy2-stp 122 phy2-utp 123 phy2-lcf 124 phy2-sts 126 sh-t16io-c 127 sh-t16io-fr 128 lse404 129 sh-t16io-cr 131 sh-e8fb 132 sh-e8fl 134 iefr-mc 136 ieqr 138 iere2 139 ltr104sn 140 le240xtc 141 le280xt 143 sh-e16fb 144 sh-e16fl 145 lse404s 146 lse404s-fb 147 lse404srj 148 le240xtcs 149 le280xts 150 lsa 151 lfe100n 152 lsf100 153 lfe100 154 lst168 155 lea10BT 156 lea10BTRed 157 leaFl 158 leaFlRed 159 sh-e24 160 sh-e24s 161 lfe1008 163 le180xt 164 sh-e24fl 165 sh-e24fb 166 sh-e24sfl 167 sh-e24sfb 168 sh-40sf 169 sh-80rj 170 lse-pm 171 lsf100n 172 ls3ls 173 las 174 leb200n 175 leb200 176 fat-pipe-fddi 178 lfe4004 185 lbt155 186 lsa2 187 lbt155Plus 188 lfe4004ST 189 lfe4004SF 190 lge-2000SX 191 lge-2000LX 192 lfe8008S 253 invalid 254 emptySlot 255 unknown 1000 visage24T 1001 visage16200F 1004 visage16200T 1005 visage16200FC 1006 visage800T 1007 visage800F 1008 visage16155FR 1009 visage16155F 1010 visage2500 1012 visage3LS 1013 visage1600T 1014 visage2008SX 1015 visage2008LX 1016 visage1008SX 1017 visage1008LX 1025 visage26Plus 1026 visage26PlusFxMM 1027 visage26PlusFxSM 1028 visage26PlusTx 1029 cajunP117S 1030 cajunP117SR 2000 m12-100T 2001 m12-100F 2002 m-spv 2003 nma-rs 2004 nma-re 2005 m-spx 2006 m2-1000SX 2007 m2-1000LX 2008 m14-10F 2009 m24-10T 2010 m-sps-T 2011 m-sps-ER 2012 m-sps-EB 2013 m32-100T 2014 m-accf 2015 m-accsf 2200 m-mls 2500 cajunP120 2501 cajunP333T 2502 cajunP333R 2503 cajunP122 2504 cajunP334T 2505 cajunP332MF 2506 cajunP133G2 2507 cajunP332G-ML 2508 cajunP133F2 2509 cajunP134G2 2510 cajunP332GT-ML 2511 cajunP334T-ML 2512 cajunP333RLB 2513 cajunP333T-PWR 2514 cajunX330W-4DS1 2515 cajunP133T 2516 cajunP133GT2 2517 cajunX330W-2DS1 2518 cajunX330W-2USP 2519 cajunX330W-2DS1-B 2600 avayaC460-M460ML-SPV 2601 avayaC460-M4648ML-T 2602 avayaC460-M4648ML-T-2G 2603 avayaC460-M4612ML-G 2604 avayaC460-M4648ML-T-PWR 2605 avayaC460-M4648ML-T-2G-PWR 2700 avayaC363T 2701 avayaC364T 2702 avayaC363T-PWR 2703 avayaC364T-PWR 2800 c-Hawk 2850 avayaG250-motherboard 2851 avayaG250-BRI-motherboard 2852 avayaG250-DS1-motherboard 2853 avayaG250-DCP-motherboard 2854 avayaG250-A14-motherboard 2900 avayaG350 3000 m15-155F 3001 m3-622F 3002 m3-622SF 3003 m15-155SF 3004 m15-155MS 3005 m2-2400I 3009 m4-DS3 3010 m4-E3 3100 avayaW310 4005 avayaG250-int-analog-2L4T 4006 avayaG250-int-analog-2L1T 4007 avayaG250-int-BRI 4008 avayaG250-int-DS1 4009 avayaG250-int-12pDCP 4010 avayaG250-int-analog-6L8T 4050 avayaG450-Mainboard 4098 avayaMM720 4099 avayaMM712 4100 avayaMM711 4101 avayaMM710 4102 avayaMM760 4103 avayaMM714 4104 avayaMM722 4105 avayaG350-int-analog 4106 avayaMM314 4107 avayaMM340 4108 avayaMM342 4109 avayaMM717 4110 avayaMM716 4111 avayaMM316 4112 avayaMM314cr 4113 avayaMM118 4128 avayaMM312 4150 avayaTGM550 4151 avayaTGM550-int-analog-2L2T 4152 avayaTIM514 4153 avayaTIM510 4154 avayaTIM521 4155 avayaTIM508 4156 avayaTIM516 4157 avayaTIM518 4200 avayaS8300 4210 avayaAM110ApplicationModule 4211 avayaCommunicationManagerBranchEditioni40TelephonyServer 4212 avayaCommunicationManagerBranchEditioni120TelephonyServer 4214 avayaCommunicationManagerBranchEditionG430TelephonyServer 4215 avayaCommunicationManagerBranchEditionG450TelephonyServer 4351 avayaMMtst 5000 avayai40-Analog-motherboard 5001 avayai40-BRI-motherboard 5002 avayai40-DS1-motherboard 5003 avaya120 5004 avayai120-int-analog 5005 avayai40-int-analog-2L4T 5006 avayai40-int-analog-2L1T 5007 avayai40-int-BRI 5008 avayai40-int-DS1 5009 avayai40-A14-motherboard 5010 avayai40-A14-int-analog-6L8T 5011 avayaCommunicationManagerBranchEditionG450-Mainboard 5013 avayaCommunicationManagerBranchEditionG430-motherboard 5014 avayaG430-motherboard 5100 avayaTRM480	.1.3.6.1.4.1.81.8.1.1.4
genGroupDescrmandatory Descriptor of the group in ASCII (readable) format, mainly for use with generic management applications.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.81.8.1.1.5
genGroupNumberOfPortsmandatory Number of ports in group. It is assumed that on each group the ports are assigned unique numbers in the range from 1 to genGroupNumberOfPorts. They correspond to the number of ports on the module (FRU)	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.81.8.1.1.6
genGroupNumberOfIntPortsmandatory Number of internal ports (ports connected to the chassis buses) on the module.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.81.8.1.1.7
genGroupResetmandatory Setting the value of this attribute to 'on' is interpreted as a software RESET command. Sensor software is reinitialized and according to the sensor specifications, partial or total reset of the module hardware may be …	Enumerationr/w Enumerated Values: 1 on 2 off 3 onWithPoE 255 notSupported	.1.3.6.1.4.1.81.8.1.1.8
genGroupAutoManmandatory This attribute reflects the status of the Auto/Manual switch which defines the working mode of sensors. In the MANUAL mode no set operations may be performed on attributes related to the sensor. The sensor works acc…	Enumeration Enumerated Values: 1 auto 2 man	.1.3.6.1.4.1.81.8.1.1.9
genGroupFullConfigobsolete Attribute describing the full configuration of a group in internal application format.	OctetString	.1.3.6.1.4.1.81.8.1.1.10
genGroupRedun12mandatory Value on(1) of this attribute defines a redundancy (backup) relationship between synchronous external ports 1 and 2 on a module. Value blocked(3) of this attribute defines that the module is in the redundancy block m…	Enumerationr/w Enumerated Values: 1 on 2 off 3 blocked 255 notSupported	.1.3.6.1.4.1.81.8.1.1.11
genGroupRedun34mandatory Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 3 and 4 on a module.	Enumerationr/w Enumerated Values: 1 on 2 off 255 notSupported	.1.3.6.1.4.1.81.8.1.1.12
genGroupRedun13-14mandatory Value ON of this attribute defines a redundancy (backup) relationship between synchronous external ports 13 and 14 on a module.	Enumerationr/w Enumerated Values: 1 on 2 off 255 notSupported	.1.3.6.1.4.1.81.8.1.1.13
genGroupStandAloneModemandatory Value ON of this attribute indicates the sensor's operation Stand Alone mode . Internal ports are disabled and the card functions in a local star configuration toward its external ports.	Enumerationr/w Enumerated Values: 1 on 2 off 255 notSupported	.1.3.6.1.4.1.81.8.1.1.14
genGroupInterProcCommStatusmandatory This attribute describes the status of the communication between the microprocessor of the sensor and the microprocessor of the agent on cards with embedded agents.	Enumeration Enumerated Values: 1 ok 2 commProblems 3 noCommunication 255 notSupported	.1.3.6.1.4.1.81.8.1.1.15
genGroupCommStatusmandatory This attribute describes the communication status of the group with the SNMP Agent as detected and reported by the agent.	Enumeration Enumerated Values: 1 ok 2 commProblems 3 noCommunication 255 notSupported	.1.3.6.1.4.1.81.8.1.1.16
genGroupHWStatusmandatory This attribute describes the status of the group hardware as detected by the sensors software.	Enumeration Enumerated Values: 1 ok 2 hardwareProblems 255 notSupported	.1.3.6.1.4.1.81.8.1.1.17
genGroupSupplyVoltageFaultmandatory A value 'on' of this attribute informs of a 'voltage supply out-of-range' error condition on sensor equipped with hardware which checks this condition.	Enumeration Enumerated Values: 1 on 2 off 255 notSupported	.1.3.6.1.4.1.81.8.1.1.18
genGroupIntTempmandatory Internal temperature of the enclosure as measured by the specific module instance.Value '999' means not supported.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.8.1.1.19
genGroupSpecificOIDmandatory This attribute provides the OID of another group containing additional more specific information regarding this instance.	ObjectIdentifier	.1.3.6.1.4.1.81.8.1.1.20
genGroupConfigurationSymbolmandatory Defines the Configuration Symbol attached to any hardware module manufactured. One single character A..Z defines the CS version. For older modules which did not support this option on SNMP character '*' will be returne…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.8.1.1.21
genGroupLastChangemandatory This attribute contains the value of sysUpTime at the time any change pertaining to the specified group occurred.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.8.1.1.22
genGroupRedunRecoverymandatory This attribute is relevant for the cards with redundancy feature (LTR-108F). It defines the behaviour in case of main port failure: on(1) - the data path returns to the main port when its correct functionality is re…	Enumeration Enumerated Values: 1 on 2 off 255 notSupported	.1.3.6.1.4.1.81.8.1.1.23
genGroupHWVersionmandatory Defines the Hardware version of the module. Current modules use a single character A - D. Very old modules which do not support this mib will be returned an asterisk '*'	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.8.1.1.24
genGroupHeightmandatory This item describes the physical height of the module in Us (1U=1.75'').	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.8.1.1.25
genGroupWidthmandatory This item describes the physical width of the module in HP units (1HP=0.5 mm).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.8.1.1.26
genGroupIntrusionControlmandatory Group intrusion security mode (not supported or Security Bypass or Secure) assigned to this module. Security Bypass - all ports in this group are not secure. Secure - ports in this group will perform security as define…	OctetStringr/w	.1.3.6.1.4.1.81.8.1.1.27
genGroupThresholdStatusmandatory This item is a bitmap that defines the threshold status of the module, in relation to the alarmPolicyTable. If the ring is monitored by the agent according to policy number x in the alarmPolicyTable, and the threshol…	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.81.8.1.1.28
genGroupEavesdroppingmandatory Group eavesdropping security mode (not supported or Security Bypass or Secure) assigned to this module. Security Bypass - all ports in this group are not secure. Secure - ports in this group will perform security as de…	OctetStringr/w	.1.3.6.1.4.1.81.8.1.1.29
genGroupMainSWVersionmandatory ASCII string for description and display of the main CPU software version in modules that utilize more than one management processor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.8.1.1.30
genGroupMPSActivityStatusmandatory This attribute defines the status of the main PS inside the stackable hub.	Enumeration Enumerated Values: 1 notActive 2 active 255 notSupported	.1.3.6.1.4.1.81.8.1.1.31
genGroupBUPSActivityStatusmandatory This attribute defines the status of the backup PS externally connected to the module.	Enumeration Enumerated Values: 1 notActive 2 active 3 notPresent 255 notSupported	.1.3.6.1.4.1.81.8.1.1.32
genGroupPrepareCountersmandatory This item should help the agent to prepare a large amount of counters. The agent should reset this value to none(1), when it has terminated to prepare the counters. fethGroupCounters(7) - This counters are only supporte…	Enumerationr/w Enumerated Values: 1 none 2 ethPortCounters 3 ethPortErrCounters 4 ethPortSWCounters 5 fethPortSWCounters 6 ethGroupCounters 7 fethGroupCounters 8 scEthCounters 255 notSupported	.1.3.6.1.4.1.81.8.1.1.33
genGroupPortLastChangemandatory This item contains the last two bytes of the TimeStamp of the last change of each port as follows: Bytes 0 -1: port 1, Bytes 2 -3: port 2, Bytes 4 -5: port 3, and so on. No trap should be sent on the item change.	OctetString	.1.3.6.1.4.1.81.8.1.1.34
genGroupIntPortLastChangemandatory This item contains the last two bytes of the TimeStamp of the last change of each internal port as follows: Bytes 0 -1: internal port 1, Bytes 2 -3: internal port 2, Bytes 4 -5: internal port 3, and so on. No trap sho…	OctetString	.1.3.6.1.4.1.81.8.1.1.35
genGroupFaultMaskmandatory Each bit of this item describes the situation of the group regarding specific fault. For example: bit 1: on indicates 'module internal communication problem' bit 2 : on indicates 'module hardware problem' and so on. …	OctetString	.1.3.6.1.4.1.81.8.1.1.36
genGroupTypeNamemandatory String with the module name.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.81.8.1.1.37
genGroupAgentSlotmandatory This attribute defines the slot number of the Agent supporting this group. If there is multiplexor, than the value will be the multiplxor slot number. If there is no multiplexor, the value will be the mudule's slot numb…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.81.8.1.1.38
genGroupMngTypemandatory This attribute defines the management type of the module.	Enumeration Enumerated Values: 1 agent 2 subAgent 3 sensor 255 notSupported	.1.3.6.1.4.1.81.8.1.1.39
genGroupNumberOfLogicalPortsmandatory Number of logical ports in group. The logical ports represent the Link Aggregation Groups (LAGs) associated with that module/switch. It is assumed that on each group the logical ports are assigned unique numbers in the …	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.81.8.1.1.40
genGroupNumberOfInterfacesmandatory The number of network interfaces (regardless of their current state) present on this module. This will help determined the ifNumber for the entire system	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.8.1.1.41
genGroupCascadUpStatusmandatory The functional status of the P330 two cascading-up ports: ok(1) - fully functional ports, transmitting and receiving packets. rld(2) - receive link down condition on at least one of the ports. blocked(3) - stacking up p…	Enumeration Enumerated Values: 1 ok 2 rld 3 blocked 255 notSupported	.1.3.6.1.4.1.81.8.1.1.42
genGroupCascadDownStatusmandatory The functional status of the P330 two cascading-down ports: ok(1) - fully functional ports, transmitting and receiving packets. rld(2) - receive link down condition on at least one of the ports. blocked(3) - stacking do…	Enumeration Enumerated Values: 1 ok 2 rld 3 blocked 255 notSupported	.1.3.6.1.4.1.81.8.1.1.43
genGroupSTARootPortIDmandatory The port ID. Number through which the STA Root bridge can be reached. If it is one of the P330 backplane port, its port id. will be from 201 to 204, as referring to backplane Guitar ports, numbered from 0 to 3 respectiv…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.8.1.1.44
genGroupCopyPortInstructionmandatory This variable is used internally by the P330 Master for sending a contracted instruction code to every Slave agent of the stack. The instruction is coded as follows: 1st Octet: 0 - reset the following port mirroring …	OctetStringr/w	.1.3.6.1.4.1.81.8.1.1.45
genGroupLicenseKeymandatory This MIB item contains the authorization key for SMON application, and for other applications in the future.	OctetStringr/w Constraints: range: 12-12	.1.3.6.1.4.1.81.8.1.1.46
genGroupLogFileClearmandatory This attribute enables the user to clear all the log files attached of a specific module.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.81.8.1.1.47
genGroupBootVersionmandatory ASCII string for description and display of the booter version of the module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.8.1.1.48
genGroupResetLastStampmandatory This attribute contains the value of sysUpTime at the time it polled	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.8.1.1.49
genGroupSerialNumbermandatory The burnt-in identifier of the device. This is a unique 7-digits number	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.8.1.1.50
genGroupShowModuleInformationmandatory String that includes all information of the Show Module CLI Command. TAB String indicates new column, while CR String indicates new line.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.81.8.1.1.51
genGroupCascadingUpFaultmandatory Enable /Disable the sending of cascading up fault traps for this module.	Enumerationr/w Enumerated Values: 1 enable 2 disable 255 notSupported	.1.3.6.1.4.1.81.8.1.1.52
genGroupCascadingDownFaultmandatory Enable /Disable the sending of cascading down fault traps for this module.	Enumerationr/w Enumerated Values: 1 enable 2 disable 255 notSupported	.1.3.6.1.4.1.81.8.1.1.53
genGroupPortClassificationMaskmandatory This is a mask of the port classification values of all ports of this module. The index of the bits starts from 0, where bit 0 is unused. If the n bit has value of 1 - it means that the n port has valuable port classifi…	OctetString	.1.3.6.1.4.1.81.8.1.1.54
genGroupPSUTypemandatory This attribute defines the type main PSU of each module.	Enumerationr/w Enumerated Values: 1 ac 2 dc 255 notSupported	.1.3.6.1.4.1.81.8.1.1.55
genGroupPolicyTypemandatory This attribute defines whether the module active policy-list is enforced on all packets or only on routed packets.	Enumerationr/w Enumerated Values: 1 router 2 all 255 notSupported	.1.3.6.1.4.1.81.8.1.1.56
genGroupFips140Readymandatory This attribute reports on when module was manufactured compliant to FIPS 140-2 standard. When reports off the module is not FIPS compliant and cannot operate in FIPS approved mode as defined by the standard.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.81.8.1.1.57

Table of configuration attributes for managed	ports.
Includes configuration data which are independent of the 
specific functionality of the port.

genPortEntry row .1.3.6.1.4.1.81.9.1.1

An entry in the table, containing data about a single port.

Indexes

genPortGroupId genPortId

Column	Syntax	OID
genPortGroupIdmandatory Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by which the group containing the port is accessed. This value is never greater than chNumberO…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.81.9.1.1.1
genPortIdmandatory Index which identifies the port inside the group for which this entry contains information. It generally corresponds with the number by which the port is identified and is marked on the module. This value is never great…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.81.9.1.1.2
genPortFunctionalitymandatory Describes the functionality of the port according to international standards.	Enumeration Enumerated Values: 1 private 2 repeaterAUI 3 repeaterThin 4 repeater10BaseT 5 tenBaseFSyncAct 6 foirl 7 xcvr 8 lobe 9 ri 10 ro 11 serial 12 localTalk 13 fddi 14 clock 15 genTokenRing 16 dte 17 activeLobe 18 genActiveTokenRing 19 tenBaseFB 20 eth10BaseT 21 fiber 22 wan 23 star 24 activeRI 25 activeRO 26 fl 27 sonet-oc3 28 a100BaseTX 29 a100BaseFX 30 oc3 31 anATM-Main 32 anATM-Secondary 33 a1000BaseFX 40 sonet 41 fimVoice 42 sdh-stm1 43 eth1000BaseSX 44 eth1000BaseLX 45 eth10BaseFL 46 ethLAG 47 lag100 48 lag1000 49 eth1000BaseTX 50 eth1000BaseCX 51 gBICNotPresent 52 gBICNotSupported 53 eth1000BaseX-Proprietary 54 oc12 55 sFP-NotPresent 56 sFP-NotSupported 57 eth10BaseTwInPWR 58 eth100BaseTXwInPWR	.1.3.6.1.4.1.81.9.1.1.3
genPortTypemandatory Attribute describing the type of port.	Enumeration Enumerated Values: 1 le10bPort 2 le10cPort 3 le15Port 4 le20Port 5 le30xPort 6 le30xdPort 7 le40xPort 8 le40xtPort 9 lobeRJ45 10 lobeD9 11 lobeD25 12 lobeFO 13 ri104D25 14 ro104D25 15 riRJ45 16 riD9 17 riD25 18 riFO 19 ri104RJ45 20 ri104D9 21 roRJ45 22 roD9 23 roD25 24 roFO 25 ro104RJ45 26 ro104D9 27 le80xtPort 28 le140xtPort 29 ielb-AUIPort 30 ielb-10btPort 31 ltrf4Port 32 ltrf16Port 33 lts16Port 34 llt8Port 35 le20rPort 36 itlbRoPort 37 itlbRiPort 38 itlbDTEPort 39 starFO 40 le10bnPort 41 le120rPort 42 le140xtf-foPort 43 le140xtf-10btPort 44 le140xtcPort 45 le110bPort 46 le110bqPort 47 le140xtqPort 48 lert40-AUIPort 49 lert40-10btPort 50 clock-int 51 clock-ext 52 ri104RJ45S 53 ro104RJ45S 54 lobe104RJ45S 55 le20fbPort 56 le140xtf-fofbPort 57 fddi-micPort1 58 fddi-micPort2 59 fddi-micPort3 60 fddi-stmPort1 61 fddi-stmPort2 62 fddi-stmPort3 63 fddi-stlPort1 64 fddi-stlPort2 65 fddi-stlPort3 66 fddi-stpPort1 67 fddi-stpPort2 68 fddi-stpPort3 69 fddi-utpPort1 70 fddi-utpPort2 71 fddi-utpPort3 72 fddi-stsPort1 73 fddi-stsPort2 74 fddi-stsPort3 75 le140xtnPort 76 ltr104a-lobePort 77 ltr104a-riPort 78 ltr104a-roPort 79 le120qPort 80 le120sq2PortS 81 le120sq2PortM 82 le120sq5Port 83 le120q-fbPort 84 le120sq2-fbPortS 85 le120sq2-fbPortM 86 le120sq5-fbPort 87 ltr108t-lobePort1 88 ltr108t-riPort1 89 ltr108t-roPort1 90 ltr108t-lobePort 91 ltr108f-lobePort 92 ltr108f-starPortFO 93 ltr108f-riPortFO 94 ltr108f-roPortFO 95 lse808Port 96 lhsPort 98 iefnPort 99 itfnPort 100 itrePort 107 ierpPort 108 lse108Port 109 lse208Port 110 le110cqPort 111 ltr108t-starPort1 112 she-10btPort 113 she-AUIPort 114 she-FOPort 115 she-FOSyncPort 116 le115qPort 117 sht-lobePort 118 sht-riRJ45Port 119 sht-riD9Port 120 sht-riFOPort 121 sht-roRJ45Port 122 sht-roD9Port 123 sht-roFOPort 124 lhbPort 126 le140xtsPort 127 le40xtnPort 128 le80xtnPort 129 itrpPort 130 fddi-lcfPort1 131 fddi-lcfPort2 132 fddi-lcfPort3 133 ltr108f-lobeRJ45 134 lse404Port 135 star104RJ45S 136 she-10bfbPort 137 sht-starPort 138 le240xtcPort 139 le280xtPort 140 iefrMICPort 141 ri104RJ45SN 142 iwr10BaseTPort 144 ro104RJ45SN 145 sh-efn-AUIPort 146 lobe104RJ45SN 147 sh-efnPort 148 sh-tfnPort 152 ierePort 153 lse404sPort 154 lse404s-fbPort 155 le240xtcsPort 156 le280xtsPort 157 atmMMFPort 158 lsaPort 159 atmUTPPort 160 sh-elbAUIPort 161 sh-elb10btPort 162 lse404srjPort 163 lfe100Port 164 lsf100Port 165 lst-lobeRJ45Port 166 lst-starRJ45Port 167 lst-riRJ45Port 168 lst-roRJ45Port 169 tenBaseTPort 170 flPort 171 shes-10btPort 172 shes-AUIPort 173 shes-FOPort 174 shes-10bfbPort 175 le180xtPort 177 lfe1008Port 178 lse-pmPort 179 sh-40sfPort 180 sh-80rjPort 181 ls3ls-WAN 183 leb200Port 184 fat-pipe-fddiPort 186 lfe4004Port 190 sonetPort 191 fimVoicePort 192 lfe4004SFPort 193 lfe4004STPort 194 lge-2000SXPort 195 lge-2000LXPort 196 lfe8008SUTPPort 255 unknownPort 1000 visage10BTPort 1001 visage16200FPort 1004 visage16200TPort 1005 visage16200FCPort 1006 visage800TPort 1007 visage800FPort 1008 visage16155FRPort 1009 visage16155FPort 1010 visage2500Port 1012 visage3LSPort 1013 visage1600TPort 1014 visage1000BaseSXPort 1015 visage1000BaseLXPort 1016 cajunP117SPort 1017 cajunP117SRPort 2000 m10or100BaseTXPort 2001 m100BaseFXPort 2002 m1000BaseSXPort 2003 m1000BaseLXPort 2004 m10BaseFLPort 2005 m10BaseTPort 2006 m10or100BaseTXdot1QPort 2007 m-acc155or622MMFPort 2008 m-acc155or622SMFPort 2500 cajunP120-10or100TPort 2501 cajunP120-100FPort 2502 cajunP120-1000SXPort 2503 cajunP120-1000LXPort 2504 cajunP330-10or100TPort 2505 cajunP330-100FPort 2506 cajunP330-1000SXPort 2507 cajunP330-1000LXPort 2508 cajunP330-LAG 2509 cajunP330-LAG100 2510 cajunP330-LAG1000 2511 cajunP110-LAG100 2512 cajunP110-LAG1000 2513 cajunP120-1000BaseCX-GBIC 2514 cajunP120-1000BaseSX-GBIC 2515 cajunP120-1000BaseLX-GBIC 2516 cajunP120-1000BaseT-GBIC 2517 cajunP120-GBIC-NotPresent 2518 cajunP120-GBIC-Unknown 2519 cajunP120-GBIC-Other 2520 cajunP120-FibreChannel-GBIC 2521 cajunP120-1000BaseTX 2522 cajunP330-1000TXPort 2523 cajunP330-1000SX-GBIC 2524 cajunP330-1000LX-GBIC 2525 cajunP330-1000T-GBIC 2526 cajunP330-1000CX-GBIC 2527 cajunP330-GBIC-NotPresent 2528 cajunP330-GBIC-NotSupported 2530 cajunP130-10or100BaseTXPort 2531 cajunP130-100BaseFXPort 2532 cajunP130-1000BaseSX-GBICPort 2533 cajunP130-1000BaseLX-GBICPort 2534 cajunP130-1000BaseX-Proprietary-GBICPort 2535 cajunP130-GBIC-NotSupported 2536 cajunP130-GBIC-NotPresent 2537 cajunP130-LAG100 2538 cajunP130-LAG1000 2539 cajunP130-1000BaseTPort 2540 cajunP330-ML-LAG 2541 cajunP330-ML-1000SX-SFP 2542 cajunP330-ML-1000LX-SFP 2543 cajunP330-ML-LAG100 2544 cajunP330-ML-LAG1000 2545 cajunP330-ML-100or1000TPort 2546 cajunP330-ML-10or100TPort 2547 cajunP330-ML-SFP-NotPresent 2548 cajunP330-ML-SFP-NotSupported 2549 cajunP330-10or100TPortAndInPWR 2550 cajunP330-ML-1000TX-SFP 2640 avayaC360-LAG 2641 avayaC360-1000SX-SFP 2642 avayaC360-1000LX-SFP 2643 avayaC360-LAG100 2644 avayaC360-LAG1000 2645 avayaC360-100or1000Tport 2646 avayaC360-10or100Tport 2647 avayaC360-SFP-NotPresent 2648 avayaC360-SFP-NotSupported 2649 avayaC360-10or100TPortAndInPWR 2650 avayaC360-1000TX-SFP 2811 avayaG250-10or100TPortAndInPWR 2812 avayaG250-10or100TPort 2902 avayaG350-LAG 2903 avayaG350-1000SX-SFP 2904 avayaG350-1000LX-SFP 2905 avayaG350-LAG100 2906 avayaG350-LAG1000 2907 avayaG350-100or1000TPort 2908 avayaG350-10or100TPort 2909 avayaG350-SFP-NotPresent 2910 avayaG350-SFP-NotSupported 2911 avayaG350-10or100TPortAndInPWR 2912 avayaG350-1000TX-SFP 2913 avayaG350-10or100or1000TPort 3000 m15-155FPort 3001 m3-622FPort 3002 m3-622SFPort 3003 m15-155SFPort 3004 m15-155MSPort 3005 m2-2400IPort 3009 m4-DS3Port 3010 m4-E3Port 3500 avayaC460-100Fport 3501 avayaC460-1000SX-SFP 3502 avayaC460-1000LX-SFP 3503 avayaC460-LAG100 3504 avayaC460-LAG1000 3505 avayaC460-1000TPort 3506 avayaC460-10or100Tport 3507 avayaC460-SFP-NotPresent 3508 avayaC460-SFP-NotSupported 3509 avayaC460-10or100TPortAndInPWR 3640 avayaW310-LAG 3641 avayaW310-1000SX-SFP 3642 avayaW310-1000LX-SFP 3643 avayaW310-LAG100 3644 avayaW310-LAG1000 3647 avayaW310-SFP-NotPresent 3648 avayaW310-SFP-NotSupported 3649 avayaW310-10or100TPortAndInPWR 3650 avayaW310-1000TX-SFP 4000 avayaCommunicationManagerBranchEditioni40-10or100TPortAndInPWR 4001 avayaCommunicationManagerBranchEditioni40-10or100TPort 4002 avayaCommunicationManagerBranchEditioni120-LAG 4003 avayaCommunicationManagerBranchEditioni120-1000SX-SFP 4004 avayaCommunicationManagerBranchEditioni120-1000LX-SFP 4005 avayaCommunicationManagerBranchEditioni120-LAG100 4006 avayaCommunicationManagerBranchEditioni120-LAG1000 4007 avayaCommunicationManagerBranchEditioni120-100or1000TPort 4008 avayaCommunicationManagerBranchEditioni120-10or100TPort 4009 avayaCommunicationManagerBranchEditioni120-SFP-NotPresent 4010 avayaCommunicationManagerBranchEditioni120-SFP-NotSupported 4011 avayaCommunicationManagerBranchEditioni120-10or100TPortAndInPWR 4012 avayaCommunicationManagerBranchEditioni120-1000TX-SFP 4013 avayaCommunicationManagerBranchEditioni120-10or100or1000TPort 4014 avayaCommunicationManagerBranchEditionG450-10or100or1000TPort 4015 avayaCommunicationManagerBranchEditionG450-10or100TPort 4017 avayaCommunicationManagerBranchEditionG430-10or100Tport 4019 avayaCommunicationManagerBranchEditionG430-10or100TPortAndInPWR 4020 avayaG430-10or100Tport 4021 avayaG430-10or100TPortAndInPWR	.1.3.6.1.4.1.81.9.1.1.4
genPortDescrmandatory Descriptor of the port in ASCII (readable) format, mainly for use with generic management applications.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.81.9.1.1.5
genPortActivityStatusmandatory This attribute defines the status of ports that may be part of a redundancy scheme. notActive(1) - indicates a disabled port which cannot transmit or receive packets even if included in a redundancy scheme. dormant(2)…	Enumeration Enumerated Values: 1 notActive 2 dormant 3 active 255 notSupported	.1.3.6.1.4.1.81.9.1.1.6
genPortSecurityPolicymandatory Security policy (noPolicy or Trap Only or Trap and Close) assigned to this port. noPolicy - do not perform intrusion control security mechanism. Trap Only - perform intrusion control security mechanism and trap the con…	OctetStringr/w	.1.3.6.1.4.1.81.9.1.1.7
genPortSecureAddressesmandatory This attribute defines the security information (physical addresses) relevant for the entry. Coded in internal format, cryptographic methods may be used for privacy purposes.	OctetStringr/w	.1.3.6.1.4.1.81.9.1.1.8
genPortIntPortConnectionmandatory The value of this attribute defines the internal port to which the port is connected. A value 0 of this attribute would indicate no internal port connection (stand-alone mode). Any other positive value equals the number…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.81.9.1.1.9
genPortAdminStatusmandatory A disabled port neither transmits nor receives. The port must be explicitly enabled to restore operation. For token ring ports, this attribute is read-only.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.9.1.1.10
genPortSpecificOIDmandatory This attribute provides the OID of another group containing additional more specific information regarding this instance.	ObjectIdentifier	.1.3.6.1.4.1.81.9.1.1.11
genPortThresholdStatusmandatory This item is a bitmap that defines the threshold status of the port, in relation to the alarmPolicyTable. If the port is monitored by the agent according to policy number x in the alarmPolicyTable, and the threshold …	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.81.9.1.1.12
genPortEavesdroppingmandatory Eavesdropping security mechanism (Off or On) assigned to this port. On - perform Eavesdropping security mechanism in the port. The information is coded in internal format.	OctetStringr/w	.1.3.6.1.4.1.81.9.1.1.13
genPortFaultMaskmandatory Each bit of this item describes the situation of the port regarding specific fault. For example: bit 1: on indicates 'port autopartition fault' bit4 : on indicates 'Ethernet port connection problem' and so on. The faul…	OctetString	.1.3.6.1.4.1.81.9.1.1.14
genPortSWRdFaultmandatory Attribute that reports to the Agent of any fault occurs in the port for the Soft Redundancy application	Enumeration Enumerated Values: 1 ok 2 fault	.1.3.6.1.4.1.81.9.1.1.15
genPortActivationmandatory A disabled port neither transmits nor receives. The port must be Explicitly enabled to restore operation.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.9.1.1.16
genPortFunctionalStatusmandatory The functional status of the port: ok(1) - fully functional port, transmitting and receiving packets. rld(2) - receive link down condition on the port - Indicates a cable or connector failure detected by the port H/W.…	Enumeration Enumerated Values: 1 ok 2 rld 3 rxJabber 8 partition 10 remoteFault 255 notSupported	.1.3.6.1.4.1.81.9.1.1.17
genPortIfMapmandatory This MIB object defines the mapping of the LANNET box port to a MIB-II interface. If the port corresponds to a stack of interfaces - like the case of ATM ports, the interface number of this port shows the lowest inter…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.9.1.1.18
genPortVLANModemandatory This item defines the VLAN operation mode of the port: perPortOnly(1) - indicates that all received packets are mapped to the VLAN, defined on the port, and packets are transmitted in untagged format; …	Enumerationr/w Enumerated Values: 1 perPortOnly 2 dot1QTagging 3 plusTagging 4 islTagging 5 dot1QTaggingButPVID 255 notSupported	.1.3.6.1.4.1.81.9.1.1.19
genPortAdminPermissionmandatory This item defines whether or not the Agent is permitted to change a Port Status from Disable to Enable. Permit(1) - The agent is permitted to do so. NotPermit(2) - The agent is not permitted to do so. Default value …	Enumerationr/w Enumerated Values: 1 permit 2 notPermit 255 notSupported	.1.3.6.1.4.1.81.9.1.1.20
genPortNamemandatory Name of the port in ASCII format, mainly filled by network managers for easily recognize the specific use of a switched port.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.81.9.1.1.21
genPortClassificationmandatory Classification assigned to this port. regular - this port is connected to regular stations. Topology changes that may occur on it will not generate the sending of topology change (notification) BPDUs, will not generate…	Enumerationr/w Enumerated Values: 1 regular 2 valuable 255 notSupported	.1.3.6.1.4.1.81.9.1.1.22
genPortVLANBindingModemandatory VLAN binding mode assigned to this port. static - this port supports only the egress VLAN list as configured manually in its corresponding dot1qVlanStaticEgressPort. This is the default VLAN Binding mode. bindToAll…	Enumerationr/w Enumerated Values: 1 static 2 bindToAll 3 bindToConfigured 4 gVRP 255 notSupported	.1.3.6.1.4.1.81.9.1.1.23