FM-MIB Table View

This table contains objects to configure Link Events 
on the interfaces.

fsFmLinkEventEntry row .1.3.6.1.4.1.2076.122.2.1.1

This table contains action to be taken for each link
event.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fsFmSymPeriodAction Action to be taken when a Symbol Period Event Notification is received. 'none' specifies no action will be taken when this event is received. 'warning' specifies that a syslog message will be generated when this event…	Enumerationr/w Enumerated Values: 1 none 2 warning	.1.3.6.1.4.1.2076.122.2.1.1.1
fsFmFrameAction Action to be taken when a Frame Event Notification is received. 'none' specifies no action will be taken when this event is received. 'warning' specifies that a syslog message will be generated when this event is rece…	Enumerationr/w Enumerated Values: 1 none 2 warning	.1.3.6.1.4.1.2076.122.2.1.1.2
fsFmFramePeriodAction Action to be taken when a Frame Period Event Notification is received. 'none' specifies no action will be taken when this event is received. 'warning' specifies that a syslog message will be generated when this event …	Enumerationr/w Enumerated Values: 1 none 2 warning	.1.3.6.1.4.1.2076.122.2.1.1.3
fsFmFrameSecSummAction Action to be taken when a Frame Seconds summary Event Notification is received. 'none' specifies no action will be taken when this event is received. 'warning' specifies that a syslog message will be generated when t…	Enumerationr/w Enumerated Values: 1 none 2 warning	.1.3.6.1.4.1.2076.122.2.1.1.4
fsFmCriticalEventAction Action to be taken when a Critical Event occurs at the local interface and notification is received from remote interface. 'none' specifies no action will be taken when this event is received. 'warning' specifies that …	Enumerationr/w Enumerated Values: 1 none 2 warning 3 block	.1.3.6.1.4.1.2076.122.2.1.1.5
fsFmDyingGaspAction Action to be taken when a Dying Gasp event occurs at the local interface and notification is received from remote interface. 'none' specifies no action will be taken when this event is received. 'warning' specifies tha…	Enumerationr/w Enumerated Values: 1 none 2 warning 3 block	.1.3.6.1.4.1.2076.122.2.1.1.6
fsFmLinkFaultAction Action to be taken when a Link Fault Event occurs at the local interface and notification is received from remote interface. 'none' specifies no action will be taken when this event is received. 'warning' specifies tha…	Enumerationr/w Enumerated Values: 1 none 2 warning 3 block	.1.3.6.1.4.1.2076.122.2.1.1.7

This table contains objects to configure Remote Loopback
mode and loopback tests.

fsFmLoopbackEntry row .1.3.6.1.4.1.2076.122.3.1.1

This table contains remote loopback configuration and
loopback test configuration.

Indexes

IF-MIBifIndex

Column	Syntax	OID
fsFmLoopbackStatus The loopback status of the local interface. This status is obtained from the local EOAM Client. When operating in normal mode with no loopback in progress, the status reads noLoopback(1). If the local OAM client know…	Enumeration Enumerated Values: 1 noLoopback 2 remoteLoopback 3 unknown	.1.3.6.1.4.1.2076.122.3.1.1.1
fsFmLBTestPattern Test Pattern for the remote loopback test. The default pattern of the test data will be 'F0F0F0F0'H	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.2076.122.3.1.1.2
fsFmLBTestPktSize Test packet size for the remote loopback test	Unsigned32r/w Constraints: range: 64-1500	.1.3.6.1.4.1.2076.122.3.1.1.3
fsFmLBTestCount Number of Test packets to be sent for the remote loopback test	Unsigned32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.2076.122.3.1.1.4
fsFmLBTestWaitTime This timer is started after sending the last test packet. The Fault management module will wait until this timer expires or the packet reception counter is equal to the transmission counter. This timer (in seconds) den…	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2076.122.3.1.1.5
fsFmLBTestCommand This attribute initiates remote loopback test with an EOAM peer. Writing startLoopbackTest(2) to this attribute cause the fault management send loopback test packets with defined test pattern, size and count. Writing n…	Enumerationr/w Enumerated Values: 1 noLoopbackTest 2 startLoopbackTest	.1.3.6.1.4.1.2076.122.3.1.1.6
fsFmLBTestStatus This attribute indicates the status of the remote loopback test. 'notInitiated' indicates that the loopback has not been initiated yet. 'loopbackbTestInprogress' indicates that the loopback test is in progress. 'loopb…	Enumeration Enumerated Values: 1 notInitiated 2 loopbackTestInprogress 3 loopbackTestCompleted	.1.3.6.1.4.1.2076.122.3.1.1.7
fsFmLBTestStartTimestamp Start timestamp of the current loopback test.	OctetString Constraints: range: 40-40	.1.3.6.1.4.1.2076.122.3.1.1.8
fsFmLBTestEndTimestamp End timestamp of the current loopback test.	OctetString Constraints: range: 40-40	.1.3.6.1.4.1.2076.122.3.1.1.9
fsFmLBTestTxCount Statistics of number of Test packets transmitted during current loopback test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.122.3.1.1.10
fsFmLBTestRxCount Statistics of number of Test packets received during current loopback test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.122.3.1.1.11
fsFmLBTestMatchCount Statistics of number of Test packets that matched with the test pattern sent during current loopback test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.122.3.1.1.12

This table contains statistics of the last remote loopback
test.

fsFmLBStatsEntry row .1.3.6.1.4.1.2076.122.3.2.1

This table contains remote loopback test results of the
last session. This table is updated every time a new loopback
test session is started. The current fsFmLBTestTxCount,
fsFmLBTestRxCount and fsFmLBTestMatchCount ar…

Indexes

IF-MIBifIndex

Column	Syntax	OID
fsFmLBStatsStartTimestamp Start timestamp of the current loopback test.	OctetString Constraints: range: 40-40	.1.3.6.1.4.1.2076.122.3.2.1.1
fsFmLBStatsEndTimestamp End timestamp of the current loopback test.	OctetString Constraints: range: 40-40	.1.3.6.1.4.1.2076.122.3.2.1.2
fsFmLBStatsTxCount Statistics of number of Test packets transmitted during last loopback test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.122.3.2.1.3
fsFmLBStatsRxCount Statistics of number of Test packets received during last loopback test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.122.3.2.1.4
fsFmLBStatsMatchCount Statistics of number of Test packets that matched with the test pattern sent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.122.3.2.1.5

This table contains objects to configure MIB  variable 
requests to be sent and clear variable response table

fsFmVarRetrievalEntry row .1.3.6.1.4.1.2076.122.4.1.1

This table contains the list of Branch and Leaves
to be sent out for a Variable Request

Indexes

IF-MIBifIndex

Column	Syntax	OID
fsFmVarRetrievalMaxVar This attribute specifies the maximum number of Variable descriptors that can be sent on the interface	Unsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2076.122.4.1.1.1
fsFmVarRetrievalRequest This attribute specifies the Variable descriptor string that will be sent in the Variable Request OAMPDU. Setting this attribute also sends the variable request OAMPDU. The format of the string should be…	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.2076.122.4.1.1.2
fsFmVarRetrievalClearResponse This attribute clears the variable response log on the specified interface. Writing 'clearResponseLog' to this variable cause the 'fsFmVarResponseTable' to be cleared. Writing 'notCleared' to this attribute has no effe…	Enumerationr/w Enumerated Values: 1 notCleared 2 clearResponseLog	.1.3.6.1.4.1.2076.122.4.1.1.3

This table contains the log of the Variable responses 
received

fsFmVarResponseEntry row .1.3.6.1.4.1.2076.122.4.3.1

This table contains the list of Variable responses
received on each interface. If the response is too long,
it is split and stored in multiple parts

Indexes

IF-MIBifIndex fsFmVarResponseId

Column	Syntax	OID
fsFmVarResponseId An arbitrary integer for identifiying more than one Response received on an interface	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2076.122.4.3.1.1
fsFmVarResponseRx1 This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2076.122.4.3.1.2
fsFmVarResponseRx2 This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2076.122.4.3.1.3
fsFmVarResponseRx3 This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2076.122.4.3.1.4
fsFmVarResponseRx4 This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2076.122.4.3.1.5
fsFmVarResponseRx5 This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2076.122.4.3.1.6
fsFmVarResponseRx6 This is the data received on the Variable response. If the received response is more than 255 bytes, it will split into multiple parts and stored	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.2076.122.4.3.1.7