SWITCH-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
48

vLanTable

table
.1.3.6.1.4.1.207.8.9.2.5.2.1.1 · 1 row entry · 7 columns
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk vLanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-VLAN-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-VLAN-MIB::vLanTable'
A list of Virtual LAN instances.
vLanEntry row .1.3.6.1.4.1.207.8.9.2.5.2.1.1.1
VLAN entry.
Indexes
Column Syntax OID
The VLAN number identifying this instance
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.207.8.9.2.5.2.1.1.1.1
A bitmap structure presenting the virtual ports assigned to
this vLan. Bits are numbered from 1 to 256 starting with the
high order bit of the first octet. Each bit which is set
indicates the virtual port number as…
OctetString
Constraints:
range: 32-32
.1.3.6.1.4.1.207.8.9.2.5.2.1.1.1.2
Textual description of the VLAN instance.
OctetStringr/w
Constraints:
range: 0-31
.1.3.6.1.4.1.207.8.9.2.5.2.1.1.1.5
The administrative status which can be set by
configuration. 'disable' will disable ALL vPorts
that are connected to this VLAN, 'enable' will enable
all ports
VlanAdminStatusCoder/w .1.3.6.1.4.1.207.8.9.2.5.2.1.1.1.6
Provide operating status of a particular VLAN.
VlanOperStatusCode .1.3.6.1.4.1.207.8.9.2.5.2.1.1.1.7
vLanModedeprecated
Provides special operating mode setup and status. Currently
this object is used to specify weather the VLAN supports
the standard or ATM CIP connections. This is deprecated
because it is not maintained by system softwa…
VlanModer/w .1.3.6.1.4.1.207.8.9.2.5.2.1.1.1.8
This attribute may only be set to 'createAndGo' and 'delete'.
'notInService' and 'createAndWait' are not supported.
SNMPv2-TCRowStatusr/w
Constraints:
range: 1-2147483647
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.207.8.9.2.5.2.1.1.1.9

vRouterTable

table
.1.3.6.1.4.1.207.8.9.2.5.2.2.1 · 1 row entry · 10 columns
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk vRouterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-VLAN-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-VLAN-MIB::vRouterTable'
A list of Virtual Router instances.
vRouterEntry row .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1
A VLAN entry.
Indexes
Column Syntax OID
This object is used to enable/disable routing protocols.
The value of this object is the logical ORing of each bit
identifying the routing protocol below, where bit 0 is the
low order bit, i.e. 2**0.
ipRip bit 0
Integer32r/w
Constraints:
range: 0-65535
range: 0-255
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.1
The IP network address for this virtual bridge
instance for the purpose of allowing access from
the external network management system.
This attribute is required for row creation.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.2
The IP network subnet mask for this virtual bridge
instance for the purpose of allowing access from the
external network management system.
This attribute is required for row creation.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.3
The IP broadcast address for this virtual bridge
instance for the purpose of allowing access from the
external network management system.
This attribute is required for row creation.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.4
Textual description of the router instance.
OctetStringr/w
Constraints:
range: 0-31
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.5
The particular routing environment can be enable(2) or
disable(1), its value is determined by the ifAdminStatus of
the interface associated with this router.
VlanAdminStatusCoder/w .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.6
Provide operating status of a particular router
environment.
VlanOperStatusCode .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.7
Only supports 'createAndGo' and 'delete' for set
operation. The vLanEntry instance identified by the
value of the index for this attribute must exist before
a attempting to create an instance of vRouterRowStatus.
SNMPv2-TCRowStatusr/w
Constraints:
range: 1-8
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.8
The value of ifIndex which corresponds to this vRouter
instance.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.9
If the value of this object is 'silent', RIP daemon
processes received routing packets and does NOT send
routing packets. If the value of this object is 'active',
RIP sends and receives routing packets.
Enumerationr/w .1.3.6.1.4.1.207.8.9.2.5.2.2.1.1.10

pPortTable

table
.1.3.6.1.4.1.207.8.9.2.5.2.3.1 · 1 row entry · 10 columns
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk pPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-VLAN-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-VLAN-MIB::pPortTable'
A list of Physical Port instances.
pPortEntry row .1.3.6.1.4.1.207.8.9.2.5.2.3.1.1
A Physical Port entry.
Column Syntax OID
The phyiscal port number.
Integer32
Constraints:
range: 1-256
range: 1-64
.1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.1
The physical media type supported by this physical port.
PhyPortMediaTypeCode
Constraints:
range: 0-5
.1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.2
A description of the instance of this physical Port.
OctetStringr/w
Constraints:
range: 0-31
range: 0-32
.1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.3
The value of ifIndex which corresponds to this physical port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.4
The duplexity of this pPort.
Enumerationr/w .1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.5
Only ports whose pPortMediaType is 'eth100' may support
autonegotiation to determine the portSpeed and pPortDuplexity.
pPortAutoNegotiate is not writeable for ports whose
pPortMediaType is not 'eth100'.
Enumerationr/w .1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.6
The administrative status of this pPort. Instances for VRouter and
Uplinks (33 and 34) are read-only, the value can be set by ifAdminStatus.
VlanAdminStatusCoder/w .1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.7
The operational status of this pPort.
VlanOperStatusCode .1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.8
The speed of the port in bits per second (bps). For ports
whose pPortMediaType is 'eth100', and pPortDuplexity has the
value 'disable' pPortSpeed may be writeable.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.9
An object used to enable or disable counters for physical
ports whose pPortMediaType is 'eth10', 'eth100', or 'eth100F'.
In some instances it is not possible to determine the state
of the counters.
Enumerationr/w
Constraints:
range: 1-8
.1.3.6.1.4.1.207.8.9.2.5.2.3.1.1.10

vPortTable

table
.1.3.6.1.4.1.207.8.9.2.5.2.4.1 · 1 row entry · 13 columns
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk vPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-VLAN-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-VLAN-MIB::vPortTable'
A list of Virtual Port instances.
vPortEntry row .1.3.6.1.4.1.207.8.9.2.5.2.4.1.1
A Virtual Port entry.
Indexes
Column Syntax OID
A unique number identifies this Virtual Port instance.
Integer32
Constraints:
range: 1-256
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.1
The physical port ID this virtual port is mapped to. If the
value is 0, then the virtual port is not associated with a
physical port.
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.2
The function type for this vPort. i.e. router, brige, ATM.
PortFuncCode .1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.3
The VLAN that this vPort belongs in.
Integer32r/w
Enumerated Values:
1simpleChecksum
2undefined
3simpleCRC
Constraints:
range: 1-65535
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.4
internal ID identifies the VLAN this vport attached to
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.5
The MAC address represented by this Virtual Port.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.6
The output MAC layer format that this particular vPort
supports as a default. The value indicates the format
required for output from this vPort.
MACLayerCoder/w
Constraints:
range: 0-255
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.7
vPortBridgeModedeprecated
A mode of this virtual port for optimization of the bridging
function. In 'autoSwitch' the system determines the best mode.
Enumerationr/w .1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.8
The time out period for a Bridged vPort to convert
to a switch optimized mode in seconds if vPortBridgMode
is set to autoSwitch(1). Setting it to zero will cause
automatic switching between the two modes immediately.
Th…
Integer32r/w
Constraints:
range: 1-256
range: 1-65535
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.9
A string to identify the instance of this virtual port.
OctetStringr/w
Constraints:
range: 0-31
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.10
The administrative status of this virtual port. Its value is
determined by the value of ifAdminStatus associated with this
vPort.
VlanAdminStatusCoder/w .1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.11
The operational status of this virtual port.
VlanOperStatusCode
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.12
The value of ifIndex which corresponds to this virtual port.
IF-MIBInterfaceIndex
Constraints:
range: 1-255
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.207.8.9.2.5.2.4.1.1.13
.1.3.6.1.4.1.207.8.9.2.5.2.5.2 · 1 row entry · 8 columns
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk ipRouteCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SWITCH-VLAN-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SWITCH-VLAN-MIB::ipRouteCacheTable'
A list of IpRouteCache Instances.
ipRouteCacheEntry row .1.3.6.1.4.1.207.8.9.2.5.2.5.2.1
An IpRouteCache Entry.
Column Syntax OID
The Index of the Route Cache entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.207.8.9.2.5.2.5.2.1.1
The Destination IpAddress of the Route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.207.8.9.2.5.2.5.2.1.2
The Source IpAddress of the Route.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.207.8.9.2.5.2.5.2.1.3
The Destination Port of the Route.
Integer32
Constraints:
range: 1-2147483647
range: 1-65535
.1.3.6.1.4.1.207.8.9.2.5.2.5.2.1.4
The Source Port of the Route.
Integer32
Enumerated Values:
1net2FlashWithErase
2net2FlashWithoutErase
3flash2Net
4delete
5rename
Constraints:
range: 1-65535
.1.3.6.1.4.1.207.8.9.2.5.2.5.2.1.5
The Physical Media on which the destination can reached from the source.
Enumeration
Enumerated Values:
1ftp
2tftp
3clusterftp
4clustertftp
.1.3.6.1.4.1.207.8.9.2.5.2.5.2.1.6
The Virtual Port using which the Destination can be reached.
Integer32
Constraints:
range: 1-256
.1.3.6.1.4.1.207.8.9.2.5.2.5.2.1.7
The VCI on which the destination is reached if the media type is ATM.
AtmVci .1.3.6.1.4.1.207.8.9.2.5.2.5.2.1.8