AT-SYSINFO-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
13

fanAndPsPsuStatusTable

table
.1.3.6.1.4.1.207.8.4.4.3.1.11 · 1 row entry · 6 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk fanAndPsPsuStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-SYSINFO-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-SYSINFO-MIB::fanAndPsPsuStatusTable' 
The table of AT8948 fanAndPsPsuStatusTable. Each entry in the table
represents the status of one of the power supplies in AT8948 system.
Each power supply has its own board ID.
fanAndPsPsuStatusEntry row .1.3.6.1.4.1.207.8.4.4.3.1.11.1
A single entry of AT8948 fanAndPsPsuStatusTable, indexed by
fanAndPsPsuNumber field.
Indexes
Column Syntax OID
fanAndPsPsuNumber
The PSU board identity for which this entry holds. If the system
consists only of a single PSU board, only one entry will appear
in the table, whose index is 1.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.207.8.4.4.3.1.11.1.1
fanAndPsPsuPresent
The PSU present state, displayed as 'yes' if present, or 'no' if absent.
Enumeration
Enumerated Values:
0yes
1no
 .1.3.6.1.4.1.207.8.4.4.3.1.11.1.2
fanAndPsPsuType
The PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT.
Enumeration
Enumerated Values:
0ac
1dc
2fan
3notPresent
4notSupported
 .1.3.6.1.4.1.207.8.4.4.3.1.11.1.3
fanAndPsPsuFan
The PSU fan status, displayed as OK, or FAIL, or NOT PRESENT.
Enumeration
Enumerated Values:
0ok
1fail
2notPresent
3notSupported
 .1.3.6.1.4.1.207.8.4.4.3.1.11.1.4
fanAndPsPsuTemperature
The PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT,
or NOT SUPPORTED.
Enumeration
Enumerated Values:
0good
1high
2notPresent
3notSupported
 .1.3.6.1.4.1.207.8.4.4.3.1.11.1.5
fanAndPsPsuPower
The PSU power status, displayed as GOOD, or BAD, or NOT PRESENT
or NOT SUPPORTED.
Enumeration
Enumerated Values:
0good
1bad
2notPresent
3notSupported
 .1.3.6.1.4.1.207.8.4.4.3.1.11.1.6

sbTempTable

table
.1.3.6.1.4.1.207.8.4.4.3.4.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk sbTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-SYSINFO-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-SYSINFO-MIB::sbTempTable' 
The table of SwitchBlade sysTemperature. Each entry in the table
represents temperature monitoring from one of the CPU cards which
may be present in the SwitchBlade system.
sbTempEntry row .1.3.6.1.4.1.207.8.4.4.3.4.2.1.1
A single entry of SwitchBlade sysTemperature
Indexes
Column Syntax OID
sbTempIndex
The board for which this temperature entry holds. If the system
consists only of a single CPU board, only one entry will appear
in the table, whose index is master(1).
Enumeration
Enumerated Values:
1master
2slave
 .1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.1
sbTempActualTemperature
The actual SwitchBlade temperature. This temperature is measured
within the SwitchBlade CPU, and is sampled at 1 second intervals.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.2
sbTempFixedThresholdStatus
The temperature status with regard to the fixed temperature
threshold. The value of the fixed temperature threshold is set at
90 degrees C. This variable represents whether the actual temperature
is above the threshold …
Enumeration
Enumerated Values:
1normal
2crossover
 .1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.3
sbTempSettableThresholdStatus
The temperature status with regard to the settable temperature
threshold. The value of the settable temperature threshold is set by
management intervention. This variable represents whether the actual
temperature is abo…
Enumeration
Enumerated Values:
1normal
2crossover
3undefined
 .1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.4
sbTempSettableThreshold
The value of the settable temperature threshold. This can be set
independently for each temperature entry. The value of this threshold
is only valid when sbTempSettableThresholdStatus is not set to
undefined(3).
Integer32r/w
Constraints:
range: 30-100
 .1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.5

atPortInfoTransceiverTable

table
.1.3.6.1.4.1.207.8.4.4.3.14.1 · 1 row entry · 2 columns
Open in standard view
Uses the allied-old variant from /opt/observium/mibs/allied-old.
Command help
Walk atPortInfoTransceiverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AT-SYSINFO-MIB' -M '/opt/observium/mibs/allied-old:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AT-SYSINFO-MIB::atPortInfoTransceiverTable' 
A table of information about the transceiver of a interface.
atPortInfoTransceiverEntry row .1.3.6.1.4.1.207.8.4.4.3.14.1.1
The description, the transceiver type of a interface.
Indexes
Column Syntax OID
atPortInfoTransceiverifIndex
The ifIndex for the interface represented
by this entry of the interfaces table.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.207.8.4.4.3.14.1.1.1
atPortInfoTransceiverType
This object indicates the type of transceiver on a interface.
Enumeration
Enumerated Values:
1rj45
2sfp-px
3sfp-bx10
4sfp-fx
5sfp-100base-lx
6sfp-t
7sfp-cx
8sfp-zx-cwdm
9sfp-lx
10sfp-sx
11sfp-oc3-lr
12sfp-oc3-ir
13sfp-oc3-mm
14xfp-srsw
15xfp-lrlw
16xfp-erew
17xfp-sr
18xfp-lr
19xfp-er
20xfp-lrm
21xfp-sw
22xfp-lw
23xfp-ew
24unknown
25empty
26sfpp-sr
27sfpp-lr
28sfpp-er
29sfpp-lrm
30inf-1-x-copper-pasv
31inf-1-x-copper-actv
32inf-1-x-lx
33inf-1-x-sx
 .1.3.6.1.4.1.207.8.4.4.3.14.1.1.2