ZhoneDsl-MIB Table View

This table contains common attributes describing
DSL physical line interfaces for DSLs without a MIB
standard.

zhoneDslLineEntry row .1.3.6.1.4.1.5504.5.4.1.1

An entry in the zhoneDslLine Table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zhoneDslLineType The DSL type. Many modem vendors allow software selection between HDSL, HDSL2, SDSL and SHDSL. Using zhoneDslLineTypeSupported the user can see what dsl option is available on this interface.	Enumerationr/w Enumerated Values: 1 hdsl 2 hdsl2 3 shdsl 96 sdsl	.1.3.6.1.4.1.5504.5.4.1.1.1
zhoneDslLineCapabilities The DSL types supported on this interface. This is a bit-map of possible types. This variable can be used to determine zhoneDslLineType.	Bits Enumerated Values: 1 hdsl 2 hdsl2 4 shdsl 8 sdsl	.1.3.6.1.4.1.5504.5.4.1.1.2
zhoneDslLineStatus The DSL modem status. Detailed modem state maybe available in the status table.	Enumeration Enumerated Values: 1 down 2 downloading 3 activated 4 training 5 up	.1.3.6.1.4.1.5504.5.4.1.1.3
zhoneDslUpLineRate The DSL upstream (cpe->co) line rate on this interface.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.1.1.4
zhoneDslDownLineRate The DSL downstream (co->cpe) line rate on this interface.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.1.1.5
zhoneDslLineConfigProfile The value of this object identifies the row in the respective dsl configuration profile table. (Ex: if zhoneDslLineType is HDSL2, then the profile identifies an HDSL2 configuration profile.) It is assumed that all prof…	Zhone-TCZhoneAdminStringr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.4.1.1.6
zhoneDslLineAlarmProfile The value of this object identifies the row in the respective dsl alarm profile table. (Ex: if zhoneDslLineType is HDSL2 then the profile identifies an HDSL2 alarm profile.) It is assumed that all profile names are uniq…	Zhone-TCZhoneAdminStringr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.4.1.1.7
zhoneDslLineRowStatus Row status in order to add an entry in this table. The required fields to be added are: (ARE ALL THE DEFAULTS OKAY)	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.5.4.1.1.8

This table contains information for HDSL2 configuration.

zhoneHdsl2ConfigProfileEntry row .1.3.6.1.4.1.5504.5.4.3.1

An entry in the zhoneHdsl2ConfigProfile Table.

Indexes

zhoneHdsl2ConfigProfileName

Column	Syntax	OID
zhoneHdsl2ConfigProfileName Configuration profile name. Used by the zhoneHdsl2LineConfigProfile entry to map zhoneDslLine Entry to the appropriate profile. When `dynamic' profiles are implemented, the profile …	Zhone-TCZhoneAdminString Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.4.3.1.1
zhoneHdsl2ConfigUnitMode Unit is configured as the CO(central office)or CPE (customer premise)side.	Enumerationr/w Enumerated Values: 1 co 2 cpe	.1.3.6.1.4.1.5504.5.4.3.1.2
zhoneHdsl2ConfigTransmitPowerbackoffMode Determines if the transmit power backoff defined in HDSL2 standard is used.	Enumerationr/w Enumerated Values: 1 backoff-disable 2 backoff-enable 3 no-change-backoff	.1.3.6.1.4.1.5504.5.4.3.1.3
zhoneHdsl2ConfigDecoderCoeffA 21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.3.1.4
zhoneHdsl2ConfigDecoderCoeffB 21 bit value corresponding to the decoder coefficient A. The default is the ANSI HDSL2 default.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.3.1.5
zhoneHdsl2ConfigFrameSyncWord 10 bit frame sync word. The default is the HDSL2 standard.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.3.1.6
zhoneHdsl2ConfigStuffBits 4 bit stuff pattern. The default is the HDSL2 standard.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.5504.5.4.3.1.7
zhoneHdsl2ConfigRowStatus Status in order to create/delete rows. For creation the following fields are required:	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.5.4.3.1.8

This table contains HDSL2 specific line status information.
          
An entry into this table is automatically created whenever a
zhoneDslLineEntry is created and the type is HDSL2.

zhoneHdsl2StatusEntry row .1.3.6.1.4.1.5504.5.4.4.1

An entry in the zhoneHdsl2Status Table.

Indexes

No indexes recorded

Column	Syntax	OID
zhoneHdsl2DriftAlarm Indicates that the framer automatically attempted to adjust for clock drift. This is not applicable for ATM.	Enumeration Enumerated Values: 1 rx-clk-alarm 2 tx-clk-alarm 3 tx-rx-clk-alarm 4 no-drift-alarm 5 not-applicable	.1.3.6.1.4.1.5504.5.4.4.1.1
zhoneHdsl2FramerIBStatus Returns the segd,sega,uib and losd bits. The format of the octet is: x x x x segd sega uib losd.	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.5504.5.4.4.1.2
zhoneHdsl2LocalPSDMaskStatus Returns a number corresponding to the transmit power backoff requested by the local unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.3
zhoneHdsl2LoopAttenuation Estimation of the loop attenuation in tenths of a DB. by the local unit.	tenth DBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.4
zhoneHdsl2LossWordStatus This indicates loss of sync.	Enumeration Enumerated Values: 1 no-lossw-defect 2 lossw-defect	.1.3.6.1.4.1.5504.5.4.4.1.5
zhoneHdsl2RmtPSDMaskStatus Returns a number corresponding to the transmit power backoff requested by the remote unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.6
zhoneHdsl2RmtCountryCode ANSI HDSL2 Country code of the remote unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.7
zhoneHdsl2RmtVersion HDSL2 version of the remote unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.8
zhoneHdsl2RmtProviderCode Provider word of the remote unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.9
zhoneHdsl2RmtVendorData The remote unit's vendor-provided data.	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.5504.5.4.4.1.10
zhoneHdsl2RmtTxEncoderA The remote unit's 21 bit encoder coefficient A	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.11
zhoneHdsl2RmtTxEncoderB The remote unit's 21 bit encoder coefficient B	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.12
zhoneHdsl2TipRingStatus Indicates whether the tip and ring points from the local unit match the tip and ring points of the remote.	Enumeration Enumerated Values: 1 normal 2 reverse	.1.3.6.1.4.1.5504.5.4.4.1.13
zhoneHdsl2FrameSyncWord A 10 bit number indicating the frame sync word used. LSB justified	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.14
zhoneHdsl2StuffBits A 4 bit number for the stuff bits. LSB justified.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.4.4.1.15

This table provides one row for each modem interface.

zhoneDslPerfDataEntry row .1.3.6.1.4.1.5504.5.4.5.1

An entry in zhoneDslPerfDataTable.

Indexes

No indexes recorded

Column	Syntax	OID
zhoneDslPerfLofs Count of the number of Loss of Framing failures since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.1
zhoneDslPerfLoss Count of the number of Loss of Signal failures since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.2
zhoneDslPerfLols Count of the number of Loss of Link failures since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.3
zhoneDslPerfInits Count of the line initialization attempts since agent reset. Includes both successful and failed attempts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.4
zhoneDslPerfCur15MinTimeElapsed The number of seconds elapsed since the start of the current measurement period.	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.5
zhoneDslPerfCur15MinLofs Count of the number of Loss of Framing failures in the current 15 minute interval.	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.6
zhoneDslPerfCur15MinLoss Count of seconds in the current 15 minute interval when there was a Loss of Signal.	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.7
zhoneDslPerfCur15MinLols Count of seconds in the current 15 minute interval when there was of Loss of Link.	secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.8
zhoneDslPerfCur15MinInits Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.4.5.1.9

This table contains information for Alarm conditions. One entry in this
table reflects a profile defined by a manager which can be used to define
alarm conditions for a modem.

zhoneDslAlarmProfileEntry row .1.3.6.1.4.1.5504.5.4.6.1

An entry in the zhoneDslAlarmProfile Table.

Indexes

zhoneDslAlarmProfileName

Column	Syntax	OID
zhoneDslAlarmProfileName Configuration profile name. Used by the zhoneDslLineConfigProfile entry to map zhoneDslLine Entry to the appropriate profile. When `dynamic' profiles are implemented, the profile …	Zhone-TCZhoneAdminString Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.4.6.1.1
zhoneDslThreshold15MinLoss The number of Loss of signal seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap.	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.4.1.5504.5.4.6.1.2
zhoneDslThreshold15MinLols The number of Loss of link seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap.	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.4.1.5504.5.4.6.1.3
zhoneDslThreshold15MinLofs The number of Loss of framing seconds on a DSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send a TRAP. 0 will disable the trap.	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.4.1.5504.5.4.6.1.4
zhoneDslAlarmProfileRowStatus RowStatus field to control deletion/addition of entries in this table. Minimal fields to be 'set' for a creation is:	Zhone-TCZhoneAdminStringr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.4.6.1.5