brLimitPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.3.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk brLimitPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::brLimitPortTable'

Copy

brLimitPortEntry row .1.3.6.1.4.1.890.1.5.12.43.3.2.1

An entry in brLimitPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
brLimitPortBrState Broadcast rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.3.2.1.1
brLimitPortBrRate Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.3.2.1.2
brLimitPortMcState Multicast rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.3.2.1.3
brLimitPortMcRate AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.3.2.1.4
brLimitPortDlfState Destination lookup failure frames rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.3.2.1.5
brLimitPortDlfRate Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.3.2.1.6

portSecurityPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.4.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portSecurityPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portSecurityPortTable'

Copy

portSecurityPortEntry row .1.3.6.1.4.1.890.1.5.12.43.4.2.1

An entry in portSecurityPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portSecurityPortState Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecur…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.4.2.1.1
portSecurityPortLearnState MAC address learning enabled/disable on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.4.2.1.2
portSecurityPortCount Number of (dynamic) MAC addresses that may be learned on the port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.4.2.1.3

vlanTrunkPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.5.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTrunkPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanTrunkPortTable'

Copy

vlanTrunkPortEntry row .1.3.6.1.4.1.890.1.5.12.43.5.1.1

An entry in vlanTrunkPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vlanTrunkPortState VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.5.1.1.1

ctlProtTransTunnelPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.6.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ctlProtTransTunnelPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::ctlProtTransTunnelPortTable'

Copy

ctlProtTransTunnelPortEntry row .1.3.6.1.4.1.890.1.5.12.43.6.2.1

An entry in ctlProtTransTunnelPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
ctlProtTransTunnelMode Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3)	Enumerationr/w Enumerated Values: 0 peer 1 tunnel 2 discard 3 network	.1.3.6.1.4.1.890.1.5.12.43.6.2.1.1

vlanStackPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.7.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanStackPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanStackPortTable'

Copy

vlanStackPortEntry row .1.3.6.1.4.1.890.1.5.12.43.7.3.1

An entry in vlanStackPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vlanStackPortMode Mode of the port. Set Normal to have the switch ignore frames received (or transmitted) on this port with VLAN stacking tags. Anything you configure in SPVID and Priority are ignored. Set Access mode to have the swit…	Enumerationr/w Enumerated Values: 1 normal 2 access 3 tunnel	.1.3.6.1.4.1.890.1.5.12.43.7.3.1.1
vlanStackPortVid VLAN ID used in service provider tag.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.7.3.1.2
vlanStackPortPrio Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest.	Enumerationr/w Enumerated Values: 0 priority-0 1 priority-1 2 priority-2 3 priority-3 4 priority-4 5 priority-5 6 priority-6 7 priority-7	.1.3.6.1.4.1.890.1.5.12.43.7.3.1.3
vlanStackTunnelPortTpid Tunnel Port TPID in hex format, e.g. 8100.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.7.3.1.4
vlanStackPCopyCtagPrio	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.7.3.1.5

selectiveQinQTable

table

.1.3.6.1.4.1.890.1.5.12.43.7.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk selectiveQinQTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::selectiveQinQTable'

Copy

selectiveQinQEntry row .1.3.6.1.4.1.890.1.5.12.43.7.4.1

An entry in selective qinq table

Indexes

selectiveQinQPort selectiveQinQCvid

Column	Syntax	OID
selectiveQinQName The name of selective qinq entry	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.7.4.1.1
selectiveQinQPort interface port id	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.7.4.1.2
selectiveQinQCvid inner vid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.7.4.1.3
selectiveQinQSpvid outer vid	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.7.4.1.4
selectiveQinQPriority priority	Enumerationr/w Enumerated Values: 0 priority-0 1 priority-1 2 priority-2 3 priority-3 4 priority-4 5 priority-5 6 priority-6 7 priority-7	.1.3.6.1.4.1.890.1.5.12.43.7.4.1.5
selectiveQinQRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.7.4.1.6
selectiveQinQACtivePrio Use the value for priority for Stag	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.7.4.1.7

portBasedInnerQTable

table

.1.3.6.1.4.1.890.1.5.12.43.7.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portBasedInnerQTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portBasedInnerQTable'

Copy

portBasedInnerQEntry row .1.3.6.1.4.1.890.1.5.12.43.7.5.1

An entry in PortBasedInnerQTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portBasedInnerQVid VLAN ID used in inner tag.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.7.5.1.1
portBasedInnerQPrio Priority value for inner tag. 0 is the lowest priority level and 7 is the highest.	Enumerationr/w Enumerated Values: 0 priority-0 1 priority-1 2 priority-2 3 priority-3 4 priority-4 5 priority-5 6 priority-6 7 priority-7	.1.3.6.1.4.1.890.1.5.12.43.7.5.1.2
portBasedInnerQActive	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.7.5.1.3
portBasedInnerQTxUntag Tx without Ctag (Only active when innerQ is enable)	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.7.5.1.4

portAuthTable

table

.1.3.6.1.4.1.890.1.5.12.43.8.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portAuthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portAuthTable'

Copy

portAuthEntry row .1.3.6.1.4.1.890.1.5.12.43.8.4.1

An entry in portAuthTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portAuthEntryState 802.1x port authentication enabled or disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.8.4.1.1
portReAuthEntryState 802.1x port re-authentication enabled or disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.8.4.1.2
portReAuthEntryTimer Re-authentication timer in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.8.4.1.3

fanRpmTable

table

.1.3.6.1.4.1.890.1.5.12.43.9.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk fanRpmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::fanRpmTable'

Copy

fanRpmEntry row .1.3.6.1.4.1.890.1.5.12.43.9.1.1

An entry in fanRpmTable.

Indexes

fanRpmIndex

Column	Syntax	OID
fanRpmIndex Index of FAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.1.1.1
fanRpmCurValue Current speed in Revolutions Per Minute (RPM) on the fan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.1.1.2
fanRpmMaxValue Maximum speed measured in Revolutions Per Minute (RPM) on the fan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.1.1.3
fanRpmMinValue Minimum speed measured in Revolutions Per Minute (RPM) on the fan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.1.1.4
fanRpmLowThresh The minimum speed at which a normal fan should work.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.1.1.5
fanRpmDescr 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.9.1.1.6

tempTable

table

.1.3.6.1.4.1.890.1.5.12.43.9.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tempTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::tempTable'

Copy

tempEntry row .1.3.6.1.4.1.890.1.5.12.43.9.2.1

An entry in tempTable.

Indexes

tempIndex

Column	Syntax	OID
tempIndex Index of temperature unit. 1:CPU, 2:DSP, 3:HW monitor chip	Enumeration Enumerated Values: 1 cpu 2 dsp 3 hwMonitor	.1.3.6.1.4.1.890.1.5.12.43.9.2.1.1
tempCurValue The current temperature measured at this sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.2.1.2
tempMaxValue The maximum temperature measured at this sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.2.1.3
tempMinValue The minimum temperature measured at this sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.2.1.4
tempHighThresh The upper temperature limit at this sensor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.2.1.5
tempDescr 'Normal' indicates temperatures below the threshold and 'Error' for those above.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.9.2.1.6

voltageTable

table

.1.3.6.1.4.1.890.1.5.12.43.9.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk voltageTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::voltageTable'

Copy

voltageEntry row .1.3.6.1.4.1.890.1.5.12.43.9.3.1

An entry in voltageTable.

Indexes

voltageIndex

Column	Syntax	OID
voltageIndex Index of voltage.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.3.1.1
voltageCurValue The current voltage reading.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.3.1.2
voltageMaxValue The maximum voltage measured at this point.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.3.1.3
voltageMinValue The minimum voltage measured at this point.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.3.1.4
voltageNominalValue The normal voltage at wchich the switch work.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.3.1.5
voltageLowThresh The minimum voltage at which the switch should work.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.9.3.1.6
voltageDescr 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.9.3.1.7

snmpTrapDestTable

table

.1.3.6.1.4.1.890.1.5.12.43.10.4 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::snmpTrapDestTable'

Copy

snmpTrapDestEntry row .1.3.6.1.4.1.890.1.5.12.43.10.4.1

An entry in snmpTrapDestTable.

Indexes

snmpTrapDestIP

Column	Syntax	OID
snmpTrapDestIP IP address of trap destination.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.10.4.1.1
snmpTrapDestRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.10.4.1.2
snmpTrapDestPort The UDP port of the trap destination.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.10.4.1.3
snmpTrapVersion The SNMP protocol version to send traps.	Enumerationr/w Enumerated Values: 0 v1 1 v2c 2 v3	.1.3.6.1.4.1.890.1.5.12.43.10.4.1.4
snmpTrapUserName The user name for sending SNMPv3 traps.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.10.4.1.5

snmpTrapGroupTable

table

.1.3.6.1.4.1.890.1.5.12.43.10.5 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::snmpTrapGroupTable'

Copy

snmpTrapGroupEntry row .1.3.6.1.4.1.890.1.5.12.43.10.5.1

An entry in snmpTrapGroupTable.

Indexes

snmpTrapDestIP

Column	Syntax	OID
snmpTrapSystemGroup	Bitsr/w Enumerated Values: 0 coldStart 1 warmStart 3 temperature 4 voltage 5 reset 7 hwinformation 9 loopguard	.1.3.6.1.4.1.890.1.5.12.43.10.5.1.1
snmpTrapInterfaceGroup	Bitsr/w Enumerated Values: 0 linkup 1 linkdown 2 autonegotiation	.1.3.6.1.4.1.890.1.5.12.43.10.5.1.2
snmpTrapAAAGroup	Bitsr/w Enumerated Values: 0 authentication 1 accounting	.1.3.6.1.4.1.890.1.5.12.43.10.5.1.3
snmpTrapSwitchGroup	Bitsr/w Enumerated Values: 0 stp 1 mactable 2 rmon	.1.3.6.1.4.1.890.1.5.12.43.10.5.1.5
snmpTrapVdslGroup	Bitsr/w Enumerated Values: 0 alarmprofile 1 others	.1.3.6.1.4.1.890.1.5.12.43.10.5.1.6

snmpUserTable

table

.1.3.6.1.4.1.890.1.5.12.43.10.7 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpUserTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::snmpUserTable'

Copy

A table that contains SNMPv3 user information.

snmpUserEntry row .1.3.6.1.4.1.890.1.5.12.43.10.7.1

An entry of snmpUserTable.

Indexes

snmpUserName

Column	Syntax	OID
snmpUserName The user name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.10.7.1.1
snmpUserSecurityLevel The level of security at which SNMP messages can be sent or with which operations are being processed.	Enumerationr/w Enumerated Values: 0 noAuthNoPriv 1 authNoPriv 2 authPriv	.1.3.6.1.4.1.890.1.5.12.43.10.7.1.2
snmpUserAuthProtocol The type of authentication protocol to be used.	Enumerationr/w Enumerated Values: 0 md5 1 sha	.1.3.6.1.4.1.890.1.5.12.43.10.7.1.3
snmpUserPrivProtocol The type of privacy protocol to be used.	Enumerationr/w Enumerated Values: 0 des 1 aes	.1.3.6.1.4.1.890.1.5.12.43.10.7.1.4

snmpTrapDestInfoTable

table

.1.3.6.1.4.1.890.1.5.12.43.10.8 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapDestInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::snmpTrapDestInfoTable'

Copy

snmpTrapDestInfoEntry row .1.3.6.1.4.1.890.1.5.12.43.10.8.1

An entry in snmpTrapDestInfoTable.

Indexes

snmpTrapDestInfoIpAddrType snmpTrapDestInfoIpAddr

Column	Syntax	OID
snmpTrapDestInfoIpAddrType IP address of trap destination.	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.10.8.1.1
snmpTrapDestInfoIpAddr IP address of trap destination.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.10.8.1.2
snmpTrapDestInfoRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.10.8.1.3
snmpTrapDestInfoPort The UDP port of the trap destination.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.10.8.1.4
snmpTrapDestInfoVersion The SNMP protocol version to send traps.	Enumerationr/w Enumerated Values: 0 v1 1 v2c 2 v3	.1.3.6.1.4.1.890.1.5.12.43.10.8.1.5
snmpTrapDestInfoUserName The user name for sending SNMPv3 traps.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.10.8.1.6

snmpTrapGroupInfoTable

table

.1.3.6.1.4.1.890.1.5.12.43.10.9 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk snmpTrapGroupInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::snmpTrapGroupInfoTable'

Copy

snmpTrapGroupInfoEntry row .1.3.6.1.4.1.890.1.5.12.43.10.9.1

An entry in snmpTrapGroupInfoTable.

Indexes

snmpTrapDestInfoIpAddrType snmpTrapDestInfoIpAddr

Column	Syntax	OID
snmpTrapGroupInfoSystemGroup	Bitsr/w Enumerated Values: 0 coldStart 1 warmStart 3 temperature 4 voltage 5 reset 7 hwinformation 9 loopguard	.1.3.6.1.4.1.890.1.5.12.43.10.9.1.1
snmpTrapGroupInfoInterfaceGroup	Bitsr/w Enumerated Values: 0 linkup 1 linkdown 2 autonegotiation	.1.3.6.1.4.1.890.1.5.12.43.10.9.1.2
snmpTrapGroupInfoAAAGroup	Bitsr/w Enumerated Values: 0 authentication 1 accounting	.1.3.6.1.4.1.890.1.5.12.43.10.9.1.3
snmpTrapGroupInfoSwitchGroup	Bitsr/w Enumerated Values: 0 stp 1 mactable 2 rmon	.1.3.6.1.4.1.890.1.5.12.43.10.9.1.5
snmpTrapGroupInfoVdslGroup	Bitsr/w Enumerated Values: 0 alarmprofile 1 others	.1.3.6.1.4.1.890.1.5.12.43.10.9.1.6

sysLoginSetupTable

table

.1.3.6.1.4.1.890.1.5.12.43.12.14.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLoginSetupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::sysLoginSetupTable'

Copy

sysLoginSetupEntry row .1.3.6.1.4.1.890.1.5.12.43.12.14.2.1

An entry in LoginLimitMaxNumberOfUser.

Indexes

sysLoginName

Column	Syntax	OID
sysLoginName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.1
sysLoginPassword	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.2
sysLoginPrivilege	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.3
sysLoginRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.12.14.2.1.4

igmpsnpVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.13.14 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpsnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::igmpsnpVlanTable'

Copy

igmpsnpVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.13.14.1

An entry in IgmpsnpVlanTable.

Indexes

igmpsnpVid

Column	Syntax	OID
igmpsnpVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.13.14.1.1
igmpsnpVlanName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.13.14.1.2
igmpsnpVlanRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.13.14.1.3

inbandIpTable

table

.1.3.6.1.4.1.890.1.5.12.43.14.6 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk inbandIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::inbandIpTable'

Copy

inbandIpEntry row .1.3.6.1.4.1.890.1.5.12.43.14.6.1

An entry in inbandIpTable.

Indexes

inbandEntryIp inbandEntryVid

Column	Syntax	OID
inbandEntryIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.14.6.1.1
inbandEntrySubnetMask	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.14.6.1.2
inbandEntryGateway	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.14.6.1.3
inbandEntryVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.14.6.1.4
inbandEntryManageable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.14.6.1.5
inbandEntryRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.14.6.1.6

filterTable

table

.1.3.6.1.4.1.890.1.5.12.43.15.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk filterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::filterTable'

Copy

filterEntry row .1.3.6.1.4.1.890.1.5.12.43.15.1.1

An entry in filterTable.

Indexes

filterMacAddr filterVid

Column	Syntax	OID
filterName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.15.1.1.1
filterActionState	Enumerationr/w Enumerated Values: 1 discard-source 2 discard-destination 3 both	.1.3.6.1.4.1.890.1.5.12.43.15.1.1.2
filterMacAddr	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.15.1.1.3
filterVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.15.1.1.4
filterRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.15.1.1.5

mirrorTable

table

.1.3.6.1.4.1.890.1.5.12.43.16.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mirrorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mirrorTable'

Copy

mirrorEntry row .1.3.6.1.4.1.890.1.5.12.43.16.3.1

An entry in mirrorTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mirrorMirroredState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.16.3.1.1
mirrorDirection	Enumerationr/w Enumerated Values: 0 ingress 1 egress 2 both	.1.3.6.1.4.1.890.1.5.12.43.16.3.1.2

aggrGroupTable

table

.1.3.6.1.4.1.890.1.5.12.43.17.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::aggrGroupTable'

Copy

aggrGroupEntry row .1.3.6.1.4.1.890.1.5.12.43.17.3.1

An entry in aggrGroupTable.

Indexes

aggrGroupIndex

Column	Syntax	OID
aggrGroupIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.17.3.1.1
aggrGroupState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.17.3.1.2
aggrGroupDynamicState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.17.3.1.3

aggrPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.17.4 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk aggrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::aggrPortTable'

Copy

aggrPortEntry row .1.3.6.1.4.1.890.1.5.12.43.17.4.1

An entry in aggrPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
aggrPortGroup	Enumerationr/w Enumerated Values: 0 none 1 t1 2 t2	.1.3.6.1.4.1.890.1.5.12.43.17.4.1.1
aggrPortDynamicStateTimeout	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.17.4.1.2

accessCtlTable

table

.1.3.6.1.4.1.890.1.5.12.43.18.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accessCtlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::accessCtlTable'

Copy

accessCtlEntry row .1.3.6.1.4.1.890.1.5.12.43.18.1.1

An entry in accessCtlTable.

Indexes

accessCtlService

Column	Syntax	OID
accessCtlService	Enumeration Enumerated Values: 1 telnet 2 ssh 3 ftp 4 http 5 https 6 icmp 7 snmp	.1.3.6.1.4.1.890.1.5.12.43.18.1.1.1
accessCtlEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.18.1.1.2
accessCtlServicePort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.18.1.1.3
accessCtlTimeout	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.18.1.1.4

securedClientTable

table

.1.3.6.1.4.1.890.1.5.12.43.18.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk securedClientTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::securedClientTable'

Copy

securedClientEntry row .1.3.6.1.4.1.890.1.5.12.43.18.2.1

An entry in securedClientTable.

Indexes

securedClientIndex

Column	Syntax	OID
securedClientIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.18.2.1.1
securedClientEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.18.2.1.2
securedClientStartIp IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.18.2.1.3
securedClientEndIp IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.18.2.1.4
securedClientService	Bitsr/w Enumerated Values: 0 telnet 1 ftp 2 http 3 icmp 4 snmp 5 ssh 6 https	.1.3.6.1.4.1.890.1.5.12.43.18.2.1.5
securedClientIpAddrType	Enumerationr/w Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.18.2.1.6
securedClientStartIpAddr	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.18.2.1.7
securedClientEndIpAddr	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.18.2.1.8

portQueuingMethodTable

table

.1.3.6.1.4.1.890.1.5.12.43.19.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portQueuingMethodTable'

Copy

portQueuingMethodEntry row .1.3.6.1.4.1.890.1.5.12.43.19.2.1

An entry in portQueuingMethodTable.

Indexes

BRIDGE-MIBdot1dBasePort portQueuingMethodQueue

Column	Syntax	OID
portQueuingMethodQueue 0...7	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.19.2.1.1
portQueuingMethodWeight 0...15	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.19.2.1.2

portQueuingMethodGeSpqTable

table

.1.3.6.1.4.1.890.1.5.12.43.19.4 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portQueuingMethodGeSpqTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portQueuingMethodGeSpqTable'

Copy

portQueuingMethodGeSpqEntry row .1.3.6.1.4.1.890.1.5.12.43.19.4.1

An entry in portQueuingMethodGeSpqTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portQueuingMethodGeSpq GE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ.	Enumerationr/w Enumerated Values: 0 none 1 q0 2 q1 3 q2 4 q3 5 q4 6 q5 7 q6 8 q7	.1.3.6.1.4.1.890.1.5.12.43.19.4.1.1

globalDhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.12.43.20.1.6 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk globalDhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::globalDhcpRelayRemoteServerTable'

Copy

globalDhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.12.43.20.1.6.1

An entry in globalDhcpRelayRemoteServerTable.

Indexes

globalDhcpRelayRemoteServerIp

Column	Syntax	OID
globalDhcpRelayRemoteServerIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.20.1.6.1.1
globalDhcpRelayRemoteServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.20.1.6.1.2

dhcpRelayTable

table

.1.3.6.1.4.1.890.1.5.12.43.20.3.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::dhcpRelayTable'

Copy

dhcpRelayEntry row .1.3.6.1.4.1.890.1.5.12.43.20.3.3.1

An entry in dhcpRelayTable.

Indexes

dhcpRelayVid

Column	Syntax	OID
dhcpRelayOption82Enable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.1
dhcpRelayInfoData	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.3
dhcpRelayRemoteIDEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.4
dhcpRelayRemoteIDData	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.5
dhcpRelayInfoType	Enumerationr/w Enumerated Values: 1 system 2 hostname	.1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.6
dhcpRelayRemoteIDType	Enumerationr/w Enumerated Values: 1 system 2 portname	.1.3.6.1.4.1.890.1.5.12.43.20.3.3.1.7

dhcpRelayRemoteServerTable

table

.1.3.6.1.4.1.890.1.5.12.43.20.3.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpRelayRemoteServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::dhcpRelayRemoteServerTable'

Copy

dhcpRelayRemoteServerEntry row .1.3.6.1.4.1.890.1.5.12.43.20.3.4.1

An entry in dhcpRelayRemoteServerTable.

Indexes

dhcpRelayVid dhcpRelayRemoteServerIp

Column	Syntax	OID
dhcpRelayVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.1
dhcpRelayRemoteServerIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.2
dhcpRelayRemoteServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.20.3.4.1.3

staticRouteTable

table

.1.3.6.1.4.1.890.1.5.12.43.21.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk staticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::staticRouteTable'

Copy

staticRouteEntry row .1.3.6.1.4.1.890.1.5.12.43.21.2.1

An entry in staticRouteTable.

Indexes

staticRouteIp staticRouteMask

Column	Syntax	OID
staticRouteName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.21.2.1.1
staticRouteIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.21.2.1.2
staticRouteMask	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.21.2.1.3
staticRouteGateway	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.21.2.1.4
staticRouteMetric	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.21.2.1.5
staticRouteRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.21.2.1.6

arpTable

table

.1.3.6.1.4.1.890.1.5.12.43.22.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::arpTable'

Copy

arpEntry row .1.3.6.1.4.1.890.1.5.12.43.22.1.1

An entry in arpTable.

Indexes

arpIpAddr arpMacVid

Column	Syntax	OID
arpIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.22.1.1.1
arpIpAddr	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.22.1.1.2
arpMacAddr	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.22.1.1.3
arpMacVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.22.1.1.4
arpType 1-static, 2-dynamic	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.890.1.5.12.43.22.1.1.5

portOpModePortTable

table

.1.3.6.1.4.1.890.1.5.12.43.24.1 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portOpModePortTable'

Copy

portOpModePortEntry row .1.3.6.1.4.1.890.1.5.12.43.24.1.1

An entry in portOpModePortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portOpModePortSpeedDuplex	Enumerationr/w Enumerated Values: 0 auto 1 speed-10-half 2 speed-10-full 3 speed-100-half 4 speed-100-full 5 speed-1000-full	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.1
portOpModePortFlowCntl	Enumerationr/w Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.2
portOpModePortName	OctetStringr/w Constraints: range: 0-9	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.3
portOpModePortModuleType	Enumeration Enumerated Values: 0 fast-ethernet-10-100 1 gigabit-ethernet-100-1000	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.4
portOpModePortLinkUpType	Enumeration Enumerated Values: 0 down 1 copper 2 fiber	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.5
portOpModePortIntrusionLock	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.6
portOpModePortLBTestSetup This entry display latest loopback test status of port while performing loopback test.	Enumerationr/w Enumerated Values: 1 internal-loopback-test	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.7
portOpModePortLBTestStatus This entry display latest loopback test status of port while performing loopback test.	Enumeration Enumerated Values: 0 none 1 under-testing 2 success 3 fail	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.8
portOpModePortSwCounterReset This entry resets port SW counter.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.9
portOpModePortVdslCounterReset This entry resets port VDSL counter.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.10
portOpModePortVdslStatus This entry reports VDSL link current status.	Enumeration Enumerated Values: 1 idle 2 standby 3 showtime	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.11
portOpModePortVdslUptime This entry reports VDSL link current link up time.	OctetString	.1.3.6.1.4.1.890.1.5.12.43.24.1.1.12

portOpModePortLBTable

table

.1.3.6.1.4.1.890.1.5.12.43.24.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortLBTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portOpModePortLBTable'

Copy

portOpModePortLBEntry row .1.3.6.1.4.1.890.1.5.12.43.24.2.1

An entry in portOpModePortLBTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portOpModePortLBActive	Enumerationr/w Enumerated Values: 1 active	.1.3.6.1.4.1.890.1.5.12.43.24.2.1.1
portOpModePortLBNumber	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.24.2.1.2
portOpModePortLBCount	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.24.2.1.3
portOpModePortLBPktSize Packet size range from 64 bytes to 1518 bytes	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.24.2.1.4

portOpModePortLBResultTable

table

.1.3.6.1.4.1.890.1.5.12.43.24.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portOpModePortLBResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portOpModePortLBResultTable'

Copy

portOpModePortLBResultEntry row .1.3.6.1.4.1.890.1.5.12.43.24.3.1

An entry in portOpModePortLBResultTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portOpModePortLBMaxRTT	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.24.3.1.1
portOpModePortLBMinRTT	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.24.3.1.2
portOpModePortLBAvgRTT	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.24.3.1.3
portOpModePortLBPktLossRate Loopback Packet loss rate	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.24.3.1.4
portOpModePortLBStatus	Enumeration Enumerated Values: 0 idle 1 in-progress 2 complete	.1.3.6.1.4.1.890.1.5.12.43.24.3.1.5

portBasedVlanPortListTable

table

.1.3.6.1.4.1.890.1.5.12.43.25.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk portBasedVlanPortListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::portBasedVlanPortListTable'

Copy

portBasedVlanPortListEntry row .1.3.6.1.4.1.890.1.5.12.43.25.1.1

An entry in portBasedVlanPortListTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
portBasedVlanPortListMembers	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.12.43.25.1.1.1

eventTable

table

.1.3.6.1.4.1.890.1.5.12.43.26.1.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk eventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::eventTable'

Copy

A list of currently active fault events. All faults
of normal type regardless of their severity level
are recorded in the event table. When a normal
type fault is cleared it is deleted from the event
table.

eventEntry row .1.3.6.1.4.1.890.1.5.12.43.26.1.1.1

An entry containing information about an
event in the event table.

Indexes

eventSeqNum

Column	Syntax	OID
eventSeqNum This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is increment…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.1
eventEventId This variable represents the event ID which uniquely identifies the event in the entire system.	EventIdNumber	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.2
eventName This variable represents the name of the event, for example 'Ethernet Link Down'	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.3
eventInstanceType This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For mo…	InstanceType Type Values: 1 unknown 2 node 3 shelf 4 line 5 switch 6 lsp 7 l2Interface 8 l3Interface 9 rowIndex	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.4
eventInstanceId This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more det…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.5
eventInstanceName This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceT…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.6
eventSeverity This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to …	EventSeverity Type Values: 1 critical 2 major 3 minor 4 informational	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.7
eventSetTime This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.	UtcTimeStamp	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.8
eventDescription This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefu…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.9
eventServAffective This variable indicates whether the event is service affective or not	EventServiceAffective Type Values: 1 noServiceAffected 2 serviceAffected	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.10
eventInstanceIdNumber This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.26.1.1.1.11

multicastPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.28.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::multicastPortTable'

Copy

multicastPortEntry row .1.3.6.1.4.1.890.1.5.12.43.28.1.1

An entry in multicastPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
multicastPortImmediateLeave	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.28.1.1.1
multicastPortMaxGroupLimited	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.28.1.1.2
multicastPortMaxOfGroup 0..255	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.28.1.1.3
multicastPortIgmpFilteringProfile	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.28.1.1.4
multicastPortQueryMode Specify query mode for each port	Enumerationr/w Enumerated Values: 1 auto-mode 2 fix-mode 3 edge-mode	.1.3.6.1.4.1.890.1.5.12.43.28.1.1.5
igmpMsgMaxLimited	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.28.1.1.6
igmpMsgLimit 0..255	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.28.1.1.7

multicastStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::multicastStatusTable'

Copy

multicastStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.29.1.1

An entry in multicastStatusTable.

Indexes

multicastStatusVlanID multicastStatusPort multicastStatusGroup

Column	Syntax	OID
multicastStatusIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.1.1.1
multicastStatusVlanID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.1.1.2
multicastStatusPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.1.1.3
multicastStatusGroup	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.29.1.1.4
multicastStatusJoinCounter	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.1.1.5
multicastStatusLeaveCounter	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.1.1.6

igmpCountTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::igmpCountTable'

Copy

A count table of igmp query/report/leave message.

igmpCountEntry row .1.3.6.1.4.1.890.1.5.12.43.29.2.1

An entry in igmpCountTable.

Indexes

igmpCountIndex

Column	Syntax	OID
igmpCountIndex Index of IgmpCountEntry. 0 means total count in whole system	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.1
igmpCountInQuery	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.2
igmpCountInReport	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.3
igmpCountInLeave	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.4
igmpCountInQueryDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.5
igmpCountInReportDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.6
igmpCountInLeaveDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.7
igmpCountOutQuery	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.8
igmpCountOutReport	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.9
igmpCountOutLeave	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.2.1.10

multicastVlanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.3 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastVlanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::multicastVlanStatusTable'

Copy

multicastVlanStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.29.3.1

An entry in multicastVlanStatusTable.

Indexes

multicastVlanStatusVlanID

Column	Syntax	OID
multicastVlanStatusVlanID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.3.1.1
multicastVlanStatusType	Enumeration Enumerated Values: 1 dynamic 2 mvr 3 static	.1.3.6.1.4.1.890.1.5.12.43.29.3.1.2
multicastVlanQueryPort	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.29.3.1.3
multicastVlanQuerySrcIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.29.3.1.4

igmpCounterPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.4 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCounterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::igmpCounterPortTable'

Copy

igmpCounterPortEntry row .1.3.6.1.4.1.890.1.5.12.43.29.4.1

An entry in igmpCounterPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
igmpCounterPortJoin Join counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.4.1.1
igmpCounterPortLeave Leave counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.4.1.2
igmpCounterPortActiveGroup Current active group for the port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.4.1.3
igmpCounterPortQuery Query counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.4.1.4

igmpCounterVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpCounterVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::igmpCounterVlanTable'

Copy

igmpCounterVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.29.5.1

An entry in igmpCounterVlanTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
igmpCounterVlanJoin Join counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.5.1.1
igmpCounterVlanLeave Leave counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.5.1.2
igmpCounterVlanActiveGroup Current active group for the Vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.5.1.3
igmpCounterVlanQuery Query counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.5.1.4

multicastCurrentGroupStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.6 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastCurrentGroupStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::multicastCurrentGroupStatusTable'

Copy

multicastCurrentGroupStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.29.6.1

An entry in multicastCurrentGroupStatusTable.

Indexes

multicastStatusVlanID multicastStatusGroup

Column	Syntax	OID
multicastCurrentNumberOfActivePort Current number Of active port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.6.1.1

multicastClientSrcIpTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.7 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk multicastClientSrcIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::multicastClientSrcIpTable'

Copy

multicastClientSrcIpEntry row .1.3.6.1.4.1.890.1.5.12.43.29.7.1

An entry in multicastClientSrcIpTable.

Indexes

multicastStatusVlanID multicastStatusPort multicastStatusGroup multicastClientSrcIpIndex

Column	Syntax	OID
multicastClientSrcIpIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.7.1.1
multicastClientSrcIpAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.29.7.1.2

mgmdStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.8 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdStatusTable'

Copy

mgmdStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.29.8.1

An entry in mgmdStatusTable.

Indexes

mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddressType mgmdStatusGroupAddress

Column	Syntax	OID
mgmdStatusIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.8.1.1
mgmdStatusVlanID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.8.1.2
mgmdStatusPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.8.1.3
mgmdStatusGroupAddressType The address type of the mgmdStatusGroupAddress entry.	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.29.8.1.4
mgmdStatusGroupAddress	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.890.1.5.12.43.29.8.1.5
mgmdStatusGroupFilterMode The current cache state, applicable to MGMDv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.890.1.5.12.43.29.8.1.6

mgmdCountTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.9 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdCountTable'

Copy

A count table of igmp/MLD query/report/leave message.

mgmdCountEntry row .1.3.6.1.4.1.890.1.5.12.43.29.9.1

An entry in mgmdCountTable.

Indexes

mgmdCountIndex

Column	Syntax	OID
mgmdCountIndex Index of mgmdCountEntry. 0 means total count in whole system	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.1
mgmdCountInQuery	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.2
mgmdCountInReport	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.3
mgmdCountInLeave	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.4
mgmdCountInQueryDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.5
mgmdCountInReportDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.6
mgmdCountInLeaveDrop	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.7
mgmdCountOutQuery	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.8
mgmdCountOutReport	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.9
mgmdCountOutLeave	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.9.1.10

mgmdVlanStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.10 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdVlanStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdVlanStatusTable'

Copy

mgmdVlanStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.29.10.1

An entry in mgmdVlanStatusTable.

Indexes

mgmdVlanStatusVlanID

Column	Syntax	OID
mgmdVlanStatusVlanID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.10.1.1
mgmdVlanStatusType	Enumeration Enumerated Values: 1 dynamic 2 mvr 3 static	.1.3.6.1.4.1.890.1.5.12.43.29.10.1.2
mgmdVlanQueryPort	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.29.10.1.3
mgmdVlanQuerySrcIpType The address type of the mgmdVlanQuerySrcIp entry.	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.29.10.1.4
mgmdVlanQuerySrcIp	OctetString Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.890.1.5.12.43.29.10.1.5

mgmdCounterPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.11 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCounterPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdCounterPortTable'

Copy

mgmdCounterPortEntry row .1.3.6.1.4.1.890.1.5.12.43.29.11.1

An entry in mgmdCounterPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mgmdCounterPortReport Report counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.11.1.1
mgmdCounterPortLeave Leave counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.11.1.2
mgmdCounterPortActiveGroup Current active group for the port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.11.1.3
mgmdCounterPortQuery Query counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.11.1.4

mgmdCounterVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.12 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCounterVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdCounterVlanTable'

Copy

mgmdCounterVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.29.12.1

An entry in mgmdCounterVlanTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
mgmdCounterVlanReport Report counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.12.1.1
mgmdCounterVlanLeave Leave counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.12.1.2
mgmdCounterVlanActiveGroup Current active group for the Vlan	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.12.1.3
mgmdCounterVlanQuery Query counter for the Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.29.12.1.4

mgmdCurrentGroupStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.13 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdCurrentGroupStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdCurrentGroupStatusTable'

Copy

mgmdCurrentGroupStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.29.13.1

An entry in mgmdCurrentGroupStatusTable.

Indexes

mgmdStatusVlanID mgmdStatusGroupAddressType mgmdStatusGroupAddress

Column	Syntax	OID
mgmdCurrentNumberOfActivePort Current number Of active port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.13.1.1

mgmdClientSrcIpTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.14 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdClientSrcIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdClientSrcIpTable'

Copy

mgmdClientSrcIpEntry row .1.3.6.1.4.1.890.1.5.12.43.29.14.1

An entry in mgmdClientSrcIpTable.

Indexes

mgmdClientSrcIpAddressType mgmdClientSrcIpIndex mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddress

Column	Syntax	OID
mgmdClientSrcIpIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.29.14.1.1
mgmdClientSrcIpAddressType	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.29.14.1.2
mgmdClientSrcIpAddress	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.890.1.5.12.43.29.14.1.3

mgmdSrcListTable

table

.1.3.6.1.4.1.890.1.5.12.43.29.15 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdSrcListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdSrcListTable'

Copy

The (conceptual) table listing the Source List entries
corresponding to each interface and multicast group pair
on a host.

mgmdSrcListEntry row .1.3.6.1.4.1.890.1.5.12.43.29.15.1

An entry (conceptual row) in the mgmdSrcListTable.

Indexes

mgmdSrcListAddressType mgmdStatusVlanID mgmdStatusPort mgmdStatusGroupAddress mgmdSrcListAddress

Column	Syntax	OID
mgmdSrcListAddressType The address type of the InetAddress variables in this table. This value applies to the mgmdStatusGroupAddress and mgmdSrcListAddress entries.	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.29.15.1.1
mgmdSrcListAddress The IP multicast group address for which this entry contains information.	OctetString Constraints: range: 16-16 range: 4-4	.1.3.6.1.4.1.890.1.5.12.43.29.15.1.2

igmpFilteringProfileTable

table

.1.3.6.1.4.1.890.1.5.12.43.30.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk igmpFilteringProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::igmpFilteringProfileTable'

Copy

igmpFilteringProfileEntry row .1.3.6.1.4.1.890.1.5.12.43.30.2.1

An entry in igmpFilteringProfileTable.

Indexes

igmpFilteringProfileName igmpFilteringProfileStartAddress igmpFilteringProfileEndAddress

Column	Syntax	OID
igmpFilteringProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.30.2.1.1
igmpFilteringProfileStartAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.30.2.1.2
igmpFilteringProfileEndAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.30.2.1.3
igmpFilteringProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.30.2.1.4

mgmdFilterProfileTable

table

.1.3.6.1.4.1.890.1.5.12.43.30.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mgmdFilterProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mgmdFilterProfileTable'

Copy

mgmdFilterProfileEntry row .1.3.6.1.4.1.890.1.5.12.43.30.3.1

An entry in mgmdFilterProfileTable.For v4 and v6 address

Indexes

mgmdFilterProfileName mgmdFilterProfileAddressType mgmdFilterProfileStartAddress mgmdFilterProfileEndAddress

Column	Syntax	OID
mgmdFilterProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.30.3.1.1
mgmdFilterProfileAddressType The type of the mgmdFilterProfileStartAddress and mgmdFilterProfileEndAddress address, as defined in the InetAddress MIB.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.12.43.30.3.1.2
mgmdFilterProfileStartAddress The Start IP address of this profile.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.30.3.1.3
mgmdFilterProfileEndAddress The End IP address of this profile.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.30.3.1.4
mgmdFilterProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.30.3.1.5

mvrTable

table

.1.3.6.1.4.1.890.1.5.12.43.31.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mvrTable'

Copy

mvrEntry row .1.3.6.1.4.1.890.1.5.12.43.31.2.1

An entry in mvrTable.

Indexes

mvrVlanID

Column	Syntax	OID
mvrVlanID 1..4094	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.31.2.1.1
mvrName	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.31.2.1.2
mvrMode	Enumerationr/w Enumerated Values: 0 dynamic 1 compatible	.1.3.6.1.4.1.890.1.5.12.43.31.2.1.3
mvrRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.31.2.1.4
mvr8021pPriority Set the 802.1p priority of control messages within MVR (0~7)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.31.2.1.5

mvrPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.31.3 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mvrPortTable'

Copy

mvrPortEntry row .1.3.6.1.4.1.890.1.5.12.43.31.3.1

An entry in mvrPortTable.

Indexes

mvrVlanID BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
mvrPortRole	Enumerationr/w Enumerated Values: 1 none 2 source-port 3 receiver-port	.1.3.6.1.4.1.890.1.5.12.43.31.3.1.1
mvrPortTagging	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.31.3.1.2

mvrGroupTable

table

.1.3.6.1.4.1.890.1.5.12.43.31.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mvrGroupTable'

Copy

mvrGroupEntry row .1.3.6.1.4.1.890.1.5.12.43.31.5.1

An entry in mvrGroupTable.

Indexes

mvrVlanID mvrGroupName

Column	Syntax	OID
mvrGroupName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.31.5.1.1
mvrGroupStartAddress	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.31.5.1.2
mvrGroupEndAddress	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.31.5.1.3
mvrGroupRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.31.5.1.4

mvrMgmdGroupTable

table

.1.3.6.1.4.1.890.1.5.12.43.31.7 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mvrMgmdGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mvrMgmdGroupTable'

Copy

mvrMgmdGroupEntry row .1.3.6.1.4.1.890.1.5.12.43.31.7.1

An entry in mvrMgmdGroupTable.

Indexes

mvrVlanID mvrMgmdGroupName

Column	Syntax	OID
mvrMgmdGroupName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.31.7.1.1
mvrMgmdGroupAddressType	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.12.43.31.7.1.2
mvrMgmdGroupStartAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.31.7.1.3
mvrMgmdGroupEndAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.31.7.1.4
mvrMgmdGroupRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.31.7.1.5

sysLogTypeTable

table

.1.3.6.1.4.1.890.1.5.12.43.33.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::sysLogTypeTable'

Copy

sysLogTypeEntry row .1.3.6.1.4.1.890.1.5.12.43.33.2.1

An entry in sysLogTypeTable.

Indexes

sysLogTypeIndex

Column	Syntax	OID
sysLogTypeIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.33.2.1.1
sysLogTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.33.2.1.2
sysLogTypeState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.33.2.1.3
sysLogTypeFacility	Enumerationr/w Enumerated Values: 0 local-user0 1 local-user1 2 local-user2 3 local-user3 4 local-user4 5 local-user5 6 local-user6 7 local-user7	.1.3.6.1.4.1.890.1.5.12.43.33.2.1.4

sysLogServerTable

table

.1.3.6.1.4.1.890.1.5.12.43.33.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::sysLogServerTable'

Copy

sysLogServerEntry row .1.3.6.1.4.1.890.1.5.12.43.33.3.1

An entry in sysLogServerTable.

Indexes

sysLogServerAddress

Column	Syntax	OID
sysLogServerAddress	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.33.3.1.1
sysLogServerLogLevel	Enumerationr/w Enumerated Values: 0 level0 1 level0-1 2 level0-2 3 level0-3 4 level0-4 5 level0-5 6 level0-6 7 level0-7	.1.3.6.1.4.1.890.1.5.12.43.33.3.1.2
sysLogServerRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.33.3.1.3

sysLogServerInfoTable

table

.1.3.6.1.4.1.890.1.5.12.43.33.4 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk sysLogServerInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::sysLogServerInfoTable'

Copy

sysLogServerInfoEntry row .1.3.6.1.4.1.890.1.5.12.43.33.4.1

An entry in sysLogServerInfoTable.

Indexes

sysLogServerInfoIpAddrType sysLogServerInfoIpAddr

Column	Syntax	OID
sysLogServerInfoIpAddrType	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.33.4.1.1
sysLogServerInfoIpAddr	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.33.4.1.2
sysLogServerInfoLogLevel	Enumerationr/w Enumerated Values: 0 level0 1 level0-1 2 level0-2 3 level0-3 4 level0-4 5 level0-5 6 level0-6 7 level0-7	.1.3.6.1.4.1.890.1.5.12.43.33.4.1.3
sysLogServerInfoRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.33.4.1.4

diffservMapTable

table

.1.3.6.1.4.1.890.1.5.12.43.34.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::diffservMapTable'

Copy

diffservMapEntry row .1.3.6.1.4.1.890.1.5.12.43.34.2.1

An entry in diffservMapTable.

Indexes

diffservMapDscp

Column	Syntax	OID
diffservMapDscp 0-63	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.34.2.1.1
diffservMapPriority 0-7	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.34.2.1.2

diffservPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.34.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk diffservPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::diffservPortTable'

Copy

diffservPortEntry row .1.3.6.1.4.1.890.1.5.12.43.34.3.1

An entry in diffservPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
diffservPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.34.3.1.1

vturInfoTable

table

.1.3.6.1.4.1.890.1.5.12.43.37.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vturInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vturInfoTable'

Copy

vturInfoEntry row .1.3.6.1.4.1.890.1.5.12.43.37.1.1

An entry in vturInfoTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vturName Display remote device name	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.37.1.1.1
vturSysVersion Display remote device system version info	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.37.1.1.2
vturModemCodeVersion Display remote device VDSL modem code version info	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.37.1.1.3

protoBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.38.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk protoBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::protoBasedVlanTable'

Copy

protoBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.38.1.1

An entry in protoBasedVlanTable.

Indexes

protoBasedVlanPort protoBasedVlanPacketType protoBasedVlanEtherType

Column	Syntax	OID
protoBasedVlanPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.38.1.1.1
protoBasedVlanPacketType	Enumeration Enumerated Values: 1 etherII 2 snap 3 llc	.1.3.6.1.4.1.890.1.5.12.43.38.1.1.2
protoBasedVlanEtherType	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.38.1.1.3
protoBasedVlanName	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.12.43.38.1.1.4
protoBasedVlanVid	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.38.1.1.5
protoBasedVlanPriority	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.12.43.38.1.1.6
protoBasedVlanState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.38.1.1.7

classifierRuleTable

table

.1.3.6.1.4.1.890.1.5.12.43.39.1 · 1 row entry · 23 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk classifierRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::classifierRuleTable'

Copy

classifierRuleEntry row .1.3.6.1.4.1.890.1.5.12.43.39.1.1

An entry in classifierRuleTable.

Indexes

classifierName

Column	Syntax	OID
classifierName Name of classifier rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.1
classifierEnable Classifier rule enabled/disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.2
classifierPacketFormat Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5).	Enumerationr/w Enumerated Values: 1 all 2 ethernetII-untagged 3 ethernetII-tagged 4 ethernet802-3-untagged 5 ethernet802-3-tagged	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.3
classifierVlanId Vlan id for classifer rule, 1~4094.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.4
classifier8021pPriority 802.1p priority for classifier rule, 0~7.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.5
classifierEtherType Ether type for classifier rule, in decimal expression.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.6
classifierSrcMAC Source mac address for classifier rule	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.7
classifierIncomingPort Incoming Port for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.8
classifierDstMAC Destination mac address for classifier rule	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.9
classifierDSCP DSCP for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.10
classifierIpProtocol IP Protocol for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.11
classifierEstablishOnly IP Protocol for EstablishOnly for classifier rule	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.12
classifierSrcIp Source IP address for classifier rule	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.13
classifierSrcIpMask Source IP Mask for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.14
classifierSrcSocket Source Socket Number for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.15
classifierDstIp Destination IP address for classifier rule	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.16
classifierDstIpMask Destination IP Mask for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.17
classifierDstSocket Destination Socket Number for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.18
classifierRowstatus Row Status for classifier rule	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.19
classifierSrcIpv6 Source IPv6 address for classifier rule	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.20
classifierSrcIpv6Mask Source IPv6 Mask for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.21
classifierDstIpv6 Destination IPv6 address for classifier rule	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.22
classifierDstIpv6Mask Destination IPv6 Mask for classifier rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.39.1.1.23

policyTable

table

.1.3.6.1.4.1.890.1.5.12.43.40.1 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk policyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::policyTable'

Copy

policyEntry row .1.3.6.1.4.1.890.1.5.12.43.40.1.1

An entry in policyTable.

Indexes

policyName

Column	Syntax	OID
policyName Name of policy rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.1
policyEnable Policy rule enabled/disabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.2
policyClassifier Classifier of policy rule.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.3
policyVlanId Vlan id for policy rule, 1~4094.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.4
policyEgressPort Egress Port for policy rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.5
policyOutPktFormat Outgoing packet format for Egress port for policy rule	Enumerationr/w Enumerated Values: 1 tag 2 untag	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.6
policy8021pPriority 802.1p priority for policy rule, 0~7.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.7
policyDSCP DSCP for policy rule.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.8
policyTOS TOS for policy rule, 0~7	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.9
policyBandwidth Bandwidth for policy rule	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.10
policyOutOfProfileDSCP Out Of Profile DSCP for policy rule.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.11
policyForwardingAction Forwarding Action for policy rule	Enumerationr/w Enumerated Values: 1 no-change 2 discard-the-packet 3 do-not-drop-the-matching-frame-previously-marked-for-dopping	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.12
policyPriorityAction Priority Action for policy rule	Enumerationr/w Enumerated Values: 1 no-change 2 set-the-packets-802-1-priority 3 send-the-packet-to-priority-queue 4 replace-the-802-1-priority-field-with-the-IP-TOS-value	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.13
policyDiffServAction DiffServ Action for policy rule	Enumerationr/w Enumerated Values: 1 no-change 2 set-the-packets-TOS-field 3 replace-the-IP-TOS-field-with-the-802-1-priority-value 4 set-the-Diffserv-Codepoint-field-in-the-frame	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.14
policyOutgoingAction Outgoing Action for policy rule	Bitsr/w Enumerated Values: 1 send-the-packet-to-the-mirror-port 2 send-the-packet-to-the-egress-port 3 send-the-matching-frames-to-the-egress-port 4 set-the-packets-VLAN-ID	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.15
policyMeteringEnable Metering for Policy rule enabled/disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.16
policyOutOfProfileAction Out Of Profile Action for policy rule	Bitsr/w Enumerated Values: 1 drop-the-packet 2 change-the-DSCP-value 3 set-Out-Drop-Precedence 4 do-not-drop-the-matching-frame-previously-marked-for-dropping	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.17
policyRowstatus Row Status for policy rule	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.40.1.1.18

vlanCounterTable

table

.1.3.6.1.4.1.890.1.5.12.43.42.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanCounterTable'

Copy

vlanCounterEntry row .1.3.6.1.4.1.890.1.5.12.43.42.1.1

An entry in vlanCounterTable.

Indexes

IF-MIBifIndex Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
vlanCounterTxPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.42.1.1.1
vlanCounterRxPkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.42.1.1.2

switchCounterTable

table

.1.3.6.1.4.1.890.1.5.12.43.42.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk switchCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::switchCounterTable'

Copy

switchCounterEntry row .1.3.6.1.4.1.890.1.5.12.43.42.2.1

An entry in switchCounterTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
switchUnknownUnicastCounter Unknown unicast counter for the port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.42.2.1.1

vlanCounterResetTable

table

.1.3.6.1.4.1.890.1.5.12.43.42.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanCounterResetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanCounterResetTable'

Copy

vlanCounterResetEntry row .1.3.6.1.4.1.890.1.5.12.43.42.3.1

An entry in vlanCounterTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
vlanCounterReset Clear VLAN counters.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.12.43.42.3.1.1

rateLimitProfilePortTable

table

.1.3.6.1.4.1.890.1.5.12.43.43.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rateLimitProfilePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::rateLimitProfilePortTable'

Copy

rateLimitProfilePortEntry row .1.3.6.1.4.1.890.1.5.12.43.43.1.1

An entry in rateLimitProfilePortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
rateLimitPortProfile	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.43.1.1.1

perQueueProfilePortTable

table

.1.3.6.1.4.1.890.1.5.12.43.43.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk perQueueProfilePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::perQueueProfilePortTable'

Copy

perQueueProfilePortEntry row .1.3.6.1.4.1.890.1.5.12.43.43.2.1

An entry in perQueueProfilePortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
perQueuePortProfile	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.43.2.1.1

rateLimitProfileTable

table

.1.3.6.1.4.1.890.1.5.12.43.44.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk rateLimitProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::rateLimitProfileTable'

Copy

rateLimitProfileEntry row .1.3.6.1.4.1.890.1.5.12.43.44.2.1

An entry in rateLimitMaxNumberOfProfile.

Indexes

rateLimitProfileName

Column	Syntax	OID
rateLimitProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.44.2.1.1
rateLimitProfilePeakRate Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.2.1.2
rateLimitProfileEgrRate Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.2.1.3
rateLimitProfileCommitRate Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.2.1.4
rateLimitProfilePeakState Ingress peak rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.44.2.1.5
rateLimitProfileEgrState Egress rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.44.2.1.6
rateLimitProfileCommitState Ingress commit rate limiting enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.44.2.1.7
rateLimitProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.44.2.1.8

perQueueProfileTable

table

.1.3.6.1.4.1.890.1.5.12.43.44.4 · 1 row entry · 18 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk perQueueProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::perQueueProfileTable'

Copy

perQueueProfileEntry row .1.3.6.1.4.1.890.1.5.12.43.44.4.1

An entry in perQueueMaxNumberOfProfile.

Indexes

perQueueProfileName

Column	Syntax	OID
perQueueProfileName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.1
perQueueProfileQ0CIR Commit rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.2
perQueueProfileQ0PIR Peak rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.3
perQueueProfileQ1CIR Commit rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.4
perQueueProfileQ1PIR Peak rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.5
perQueueProfileQ2CIR Commit rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.6
perQueueProfileQ2PIR Peak rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.7
perQueueProfileQ3CIR Commit rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.8
perQueueProfileQ3PIR Peak rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.9
perQueueProfileQ4CIR Commit rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.10
perQueueProfileQ4PIR Peak rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.11
perQueueProfileQ5CIR Commit rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.12
perQueueProfileQ5PIR Peak rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.13
perQueueProfileQ6CIR Commit rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.14
perQueueProfileQ6PIR Peak rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.15
perQueueProfileQ7CIR Commit rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.16
perQueueProfileQ7PIR Peak rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.17
perQueueProfileRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.44.4.1.18

vlanSecurityTable

table

.1.3.6.1.4.1.890.1.5.12.43.45.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanSecurityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanSecurityTable'

Copy

vlanSecurityEntry row .1.3.6.1.4.1.890.1.5.12.43.45.1.1

An entry in vlanSecurityTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
vlanSecurityCount Number of (dynamic) MAC addresses that may be learned on the VID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.45.1.1.1

cfmLoopbackPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.46.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cfmLoopbackPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::cfmLoopbackPortTable'

Copy

cfmLoopbackPortEntry row .1.3.6.1.4.1.890.1.5.12.43.46.1.1

An entry in cfmLoopbackPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
cfmLoopbackPortState CFM loopback enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.46.1.1.1

cfmMIPTable

table

.1.3.6.1.4.1.890.1.5.12.43.46.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk cfmMIPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::cfmMIPTable'

Copy

cfmMIPEntry row .1.3.6.1.4.1.890.1.5.12.43.46.2.1

An entry in cfmMIPTable.

Indexes

cfmLevel cfmVlanID cfmPort

Column	Syntax	OID
cfmPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.46.2.1.1
cfmVlanID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.46.2.1.2
cfmLevel	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.46.2.1.3
cfmMIPRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.46.2.1.4

mrstpBridgeTable

table

.1.3.6.1.4.1.890.1.5.12.43.48.1.1 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mrstpBridgeTable'

Copy

mrstpBridgeEntry row .1.3.6.1.4.1.890.1.5.12.43.48.1.1.1

An entry in mrstpBridgeTable.

Indexes

mrstpBridgeIndex

Column	Syntax	OID
mrstpBridgeIndex The tree index of the MRSTP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.1
mrstpState Enabled/disabled on the mrstp bridge.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.2
mrstpProtocolSpecification An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If fut…	Enumeration Enumerated Values: 1 unknown 2 decLb100 3 ieee8021d	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.3
mrstpPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.4
mrstpTimeSinceTopologyChange The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.5
mrstpTopChanges The total number of topology changes detected by this bridge since the management entity was last reset or initialized.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.6
mrstpDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originat…	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.7
mrstpRootCost The cost of the path to the root as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.8
mrstpRootPort The port number of the port which offers the lowest cost path from this bridge to the root bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.9
mrstpMaxAge The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.10
mrstpHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.11
mrstpHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.12
mrstpForwardDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Li…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.13
mrstpBridgeMaxAge The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeHelloTime. The granularity of th…	Integer32r/w Constraints: range: 600-4000	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.14
mrstpBridgeHelloTime The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempte…	Integer32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.15
mrstpBridgeForwardDelay The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeMaxAge. The granularity o…	Integer32r/w Constraints: range: 400-3000	.1.3.6.1.4.1.890.1.5.12.43.48.1.1.1.16

mrstpPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.48.1.2 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mrstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mrstpPortTable'

Copy

A table that contains port-specific information
for the Spanning Tree Protocol.

mrstpPortEntry row .1.3.6.1.4.1.890.1.5.12.43.48.1.2.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

mrstpPort

Column	Syntax	OID
mrstpPort The port number of the port for which this entry contains Spanning Tree Protocol management information.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.1
mrstpPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mrstpPort.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.2
mrstpPortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will …	Enumeration Enumerated Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.3
mrstpPortEnable The enabled/disabled status of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.4
mrstpPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of t…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.5
mrstpPortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.6
mrstpPortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.7
mrstpPortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.8
mrstpPortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.9
mrstpPortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.10
mrstpPortOnBridgeIndex Indetify the bridge index that this port joined to in MRSTP.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.48.1.2.1.11

dhcpSnpVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.49.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::dhcpSnpVlanTable'

Copy

dhcpSnpVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.49.1.1

Indexes

dhcpSnpVlanEntryVid

Column	Syntax	OID
dhcpSnpVlanEntryVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.49.1.1.1
dhcpSnpVlanEntryEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.49.1.1.2
dhcpSnpVlanEntryOption82Enable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.49.1.1.3
dhcpSnpVlanEntryInfo	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.49.1.1.4
dhcpSnpVlanEntryRemoteID	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.49.1.1.5

dhcpSnpPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.49.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::dhcpSnpPortTable'

Copy

dhcpSnpPortEntry row .1.3.6.1.4.1.890.1.5.12.43.49.2.1

Indexes

dhcpSnpPortEntryPort

Column	Syntax	OID
dhcpSnpPortEntryPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.49.2.1.1
dhcpSnpPortEntryTrust	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.49.2.1.2
dhcpSnpPortEntryRate 0 means unlimited	Integer32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.890.1.5.12.43.49.2.1.3

dhcpSnpBindTable

table

.1.3.6.1.4.1.890.1.5.12.43.49.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk dhcpSnpBindTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::dhcpSnpBindTable'

Copy

dhcpSnpBindEntry row .1.3.6.1.4.1.890.1.5.12.43.49.3.1

Indexes

dhcpSnpBindEntryMac dhcpSnpBindEntryVid

Column	Syntax	OID
dhcpSnpBindEntryMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.49.3.1.1
dhcpSnpBindEntryVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.49.3.1.2
dhcpSnpBindEntryIP	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.49.3.1.3
dhcpSnpBindEntryLease	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.49.3.1.4
dhcpSnpBindEntryType	Enumeration Enumerated Values: 2 dynamic	.1.3.6.1.4.1.890.1.5.12.43.49.3.1.5
dhcpSnpBindEntryPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.49.3.1.6

ipsgTable

table

.1.3.6.1.4.1.890.1.5.12.43.50.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ipsgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::ipsgTable'

Copy

ipsgEntry row .1.3.6.1.4.1.890.1.5.12.43.50.1.1

Indexes

ipsgEntryMac ipsgEntryVid

Column	Syntax	OID
ipsgEntryMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.50.1.1.1
ipsgEntryVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.50.1.1.2
ipsgEntryIp	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.50.1.1.3
ipsgEntryLease second	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.50.1.1.4
ipsgEntryType	Enumeration Enumerated Values: 1 static 2 dhcp	.1.3.6.1.4.1.890.1.5.12.43.50.1.1.5
ipsgEntryPort 0 means any port	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.50.1.1.6
ipsgEntryState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.50.1.1.7

arpInspectVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.51.1.4 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::arpInspectVlanTable'

Copy

arpInspectVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.51.1.4.1

Indexes

arpInspectVlanVid

Column	Syntax	OID
arpInspectVlanVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.1
arpInspectVlanLog	Enumerationr/w Enumerated Values: 1 all 2 none 3 permit 4 deny	.1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.2
arpInspectVlanStatus	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.51.1.4.1.3

arpInspectPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.51.1.5 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::arpInspectPortTable'

Copy

arpInspectPortEntry row .1.3.6.1.4.1.890.1.5.12.43.51.1.5.1

Indexes

arpInspectPortIndex

Column	Syntax	OID
arpInspectPortIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.1
arpInspectPortTrust	Enumerationr/w Enumerated Values: 1 trusted 2 untrusted	.1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.2
arpInspectPortRate	Integer32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.3
arpInspectPortInterval	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.890.1.5.12.43.51.1.5.1.4

arpInspectFilterTable

table

.1.3.6.1.4.1.890.1.5.12.43.51.2.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectFilterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::arpInspectFilterTable'

Copy

arpInspectFilterEntry row .1.3.6.1.4.1.890.1.5.12.43.51.2.3.1

Indexes

arpInspectFilterMac arpInspectFilterVid

Column	Syntax	OID
arpInspectFilterMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.1
arpInspectFilterVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.2
arpInspectFilterPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.3
arpInspectFilterExpiry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.4
arpInspectFilterReason	Enumeration Enumerated Values: 1 macVid 2 port 3 ip	.1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.5
arpInspectFilterRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.51.2.3.1.6

arpInspectLogTable

table

.1.3.6.1.4.1.890.1.5.12.43.51.2.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectLogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::arpInspectLogTable'

Copy

arpInspectLogEntry row .1.3.6.1.4.1.890.1.5.12.43.51.2.4.1

Indexes

arpInspectLogMac arpInspectLogVid arpInspectLogPort arpInspectLogIp arpInspectLogReason

Column	Syntax	OID
arpInspectLogMac	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.1
arpInspectLogVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.2
arpInspectLogPort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.3
arpInspectLogIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.4
arpInspectLogNumPkt	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.5
arpInspectLogReason	Enumeration Enumerated Values: 1 deny 2 denyStatic 3 denyDHCP 4 permitStatic 5 permitDHCP	.1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.6
arpInspectLogTime	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.890.1.5.12.43.51.2.4.1.7

arpInspectStatisticsTable

table

.1.3.6.1.4.1.890.1.5.12.43.51.2.5 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk arpInspectStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::arpInspectStatisticsTable'

Copy

arpInspectStatisticsEntry row .1.3.6.1.4.1.890.1.5.12.43.51.2.5.1

Indexes

arpInspectStatisticsVid

Column	Syntax	OID
arpInspectStatisticsVid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.1
arpInspectStatisticsReceived	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.2
arpInspectStatisticsRequest	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.3
arpInspectStatisticsReply	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.4
arpInspectStatisticsForward	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.5
arpInspectStatisticsDrop	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.6
arpInspectStatisticsClear	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.51.2.5.1.7

trTCMPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.52.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk trTCMPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::trTCMPortTable'

Copy

trTCMPortEntry row .1.3.6.1.4.1.890.1.5.12.43.52.3.1

An entry in trTCMPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
trTCMPortState Two-rate three color marker enabled/disabled on the port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.52.3.1.1
trTCMPortCIR Allowed CIR in pkts/s.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.52.3.1.2
trTCMPortPIR Allowed PIR in pkts/s.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.52.3.1.3
trTCMPortDscpGreen 0-63	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.52.3.1.4
trTCMPortDscpYellow 0-63	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.52.3.1.5
trTCMPortDscpRed 0-63	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.52.3.1.6

loopGuardPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.53.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk loopGuardPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::loopGuardPortTable'

Copy

loopGuardPortEntry row .1.3.6.1.4.1.890.1.5.12.43.53.2.1

An entry in loopGuardPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
loopGuardPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.53.2.1.1
loopGuardPortMode Specify loopguard mode for each port	Enumerationr/w Enumerated Values: 1 fix 2 dynamic	.1.3.6.1.4.1.890.1.5.12.43.53.2.1.2
loopGuardPortRecoverTime recover time to activate port in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.53.2.1.3

subnetBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.54.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subnetBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::subnetBasedVlanTable'

Copy

subnetBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.54.3.1

An entry in subnetBasedVlanTable.

Indexes

subnetBasedVlanSrcIp subnetBasedVlanSrcMaskBit

Column	Syntax	OID
subnetBasedVlanSrcIp source ip for subnet-based vlan entry	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.54.3.1.1
subnetBasedVlanSrcMaskBit source ip mask-bits for subnet-based vlan entry	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.43.54.3.1.2
subnetBasedVlanName name for subnet-based vlan entry	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.12.43.54.3.1.3
subnetBasedVlanVid vid for subnet-based vlan entry	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.54.3.1.4
subnetBasedVlanPriority priority for subnet-based vlan entry	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.12.43.54.3.1.5
subnetBasedVlanEntryState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.54.3.1.6

subnetBasedVlanInfoTable

table

.1.3.6.1.4.1.890.1.5.12.43.54.4 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk subnetBasedVlanInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::subnetBasedVlanInfoTable'

Copy

subnetBasedVlanInfoEntry row .1.3.6.1.4.1.890.1.5.12.43.54.4.1

An entry in subnetBasedVlanInfoTable.

Indexes

subnetBasedVlanInfoSrcIpType subnetBasedVlanInfoSrcIp subnetBasedVlanInfoSrcMaskBit

Column	Syntax	OID
subnetBasedVlanInfoSrcIpType Ip type for subnet-based vlan entry	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.54.4.1.1
subnetBasedVlanInfoSrcIp source ip of IPv4 or IPv6 for subnet-based vlan entry	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.54.4.1.2
subnetBasedVlanInfoSrcMaskBit source ip mask-bits for subnet-based vlan entry	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.43.54.4.1.3
subnetBasedVlanInfoName name for subnet-based vlan entry	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.12.43.54.4.1.4
subnetBasedVlanInfoVid vid for subnet-based vlan entry	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.54.4.1.5
subnetBasedVlanInfoPriority priority for subnet-based vlan entry	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.12.43.54.4.1.6
subnetBasedVlanInfoEntryState	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.54.4.1.7

macAuthenticationPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.55.5 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macAuthenticationPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::macAuthenticationPortTable'

Copy

macAuthenticationPortEntry row .1.3.6.1.4.1.890.1.5.12.43.55.5.1

An entry in macAuthenticationPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
macAuthenticationPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.55.5.1.1

mstMapTable

table

.1.3.6.1.4.1.890.1.5.12.43.56.20 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mstMapTable'

Copy

This table contains one entry for each instance of MSTP.

mstMapEntry row .1.3.6.1.4.1.890.1.5.12.43.56.20.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstMapIndex

Column	Syntax	OID
mstMapIndex Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation	MstiOrCistInstanceIndex Type Constraints: range: 0..16	.1.3.6.1.4.1.890.1.5.12.43.56.20.1.1
mstMapVlans1k A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to …	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.12.43.56.20.1.2
mstMapVlans2k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.12.43.56.20.1.3
mstMapVlans3k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.12.43.56.20.1.4
mstMapVlans4k A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.890.1.5.12.43.56.20.1.5
mstMapRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.56.20.1.6

mstVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.56.30 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mstVlanTable'

Copy

This table contains one entry for each VlanId.

mstVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.56.30.1

Information regarding the instance to which each Vlan is mapped.

Indexes

mstVlanIndex

Column	Syntax	OID
mstVlanIndex The VlanId for which this entry contains the instance mapped.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.12.43.56.30.1.1
mstVlanMstIndex An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped	MstiOrCistInstanceIndex Type Constraints: range: 0..16	.1.3.6.1.4.1.890.1.5.12.43.56.30.1.2

mstpPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.56.40 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mstpPortTable'

Copy

A table that contains generic information about
every port that is associated with this bridge.

mstpPortEntry row .1.3.6.1.4.1.890.1.5.12.43.56.40.1

A list of information for each port of the
bridge.

Indexes

mstpPortIndex

Column	Syntax	OID
mstpPortIndex A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.43.56.40.1.1
mstpPortOperEdgePort	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.12.43.56.40.1.2
mstpPortOperPointToPointMAC	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.890.1.5.12.43.56.40.1.3

mstpXstTable

table

.1.3.6.1.4.1.890.1.5.12.43.56.50 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mstpXstTable'

Copy

.

mstpXstEntry row .1.3.6.1.4.1.890.1.5.12.43.56.50.1

.

Indexes

mstpXstId

Column	Syntax	OID
mstpXstId 0 means CIST.	MstiOrCistInstanceIndex Type Constraints: range: 0..16	.1.3.6.1.4.1.890.1.5.12.43.56.50.1.1
mstpXstBridgePriority Bridge priority, in steps of 4096.	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.890.1.5.12.43.56.50.1.2
mstpXstBridgeId .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.43.56.50.1.3
mstpXstInternalRootCost .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.56.50.1.4
mstpXstRootPort .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.56.50.1.5
mstpXstTimeSinceTopologyChange .	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.56.50.1.6
mstpXstTopologyChangesCount .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.56.50.1.7

mstpXstPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.56.60 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk mstpXstPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::mstpXstPortTable'

Copy

.

mstpXstPortEntry row .1.3.6.1.4.1.890.1.5.12.43.56.60.1

.

Indexes

mstpXstPortXstId mstpXstPortIndex

Column	Syntax	OID
mstpXstPortXstId 0 means CIST.	MstiOrCistInstanceIndex Type Constraints: range: 0..16	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.1
mstpXstPortIndex The value of mstpPortIndex of the Port in mstpPortTable.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.2
mstpXstPortEnable .	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.3
mstpXstPortPriority Port priority, in steps of 16.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.4
mstpXstPortPathCost .	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.5
mstpXstPortState .	Enumeration Enumerated Values: 0 disabled 1 discarding 2 learning 3 forwarding 4 unknown	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.6
mstpXstPortDesignatedRoot .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.7
mstpXstPortDesignatedCost .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.8
mstpXstPortDesignatedBridge .	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.9
mstpXstPortDesignatedPort .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.56.60.1.10

radiusAuthServerTable

table

.1.3.6.1.4.1.890.1.5.12.43.57.1.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::radiusAuthServerTable'

Copy

radiusAuthServerEntry row .1.3.6.1.4.1.890.1.5.12.43.57.1.3.1

An entry in radiusAuthServerTable.

Indexes

radiusAuthServerIndex

Column	Syntax	OID
radiusAuthServerIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.1
radiusAuthServerIpAddr IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.2
radiusAuthServerUdpPort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.3
radiusAuthServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.4
radiusAuthServerIpAddressType	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.5
radiusAuthServerIpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.57.1.3.1.6

radiusAcctServerTable

table

.1.3.6.1.4.1.890.1.5.12.43.57.2.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk radiusAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::radiusAcctServerTable'

Copy

radiusAcctServerEntry row .1.3.6.1.4.1.890.1.5.12.43.57.2.2.1

An entry in radiusAcctServerTable.

Indexes

radiusAcctServerIndex

Column	Syntax	OID
radiusAcctServerIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.1
radiusAcctServerIpAddr IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.2
radiusAcctServerUdpPort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.3
radiusAcctServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.4
radiusAcctServerIpAddressType	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.5
radiusAcctServerIpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.57.2.2.1.6

tacacsAuthServerTable

table

.1.3.6.1.4.1.890.1.5.12.43.58.1.3 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAuthServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::tacacsAuthServerTable'

Copy

tacacsAuthServerEntry row .1.3.6.1.4.1.890.1.5.12.43.58.1.3.1

An entry in tacacsAuthServerTable.

Indexes

tacacsAuthServerIndex

Column	Syntax	OID
tacacsAuthServerIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.1
tacacsAuthServerIpAddr IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.2
tacacsAuthServerTcpPort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.3
tacacsAuthServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.4
tacacsAuthServerIpAddressType	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.5
tacacsAuthServerIpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.58.1.3.1.6

tacacsAcctServerTable

table

.1.3.6.1.4.1.890.1.5.12.43.58.2.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk tacacsAcctServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::tacacsAcctServerTable'

Copy

tacacsAcctServerEntry row .1.3.6.1.4.1.890.1.5.12.43.58.2.2.1

An entry in tacacsAcctServerTable.

Indexes

tacacsAcctServerIndex

Column	Syntax	OID
tacacsAcctServerIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.1
tacacsAcctServerIpAddr IPv4 only	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.2
tacacsAcctServerTcpPort	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.3
tacacsAcctServerSharedSecret	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.4
tacacsAcctServerIpAddressType	Enumeration Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.5
tacacsAcctServerIpAddress	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.12.43.58.2.2.1.6

authenticationTypeTable

table

.1.3.6.1.4.1.890.1.5.12.43.59.1.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk authenticationTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::authenticationTypeTable'

Copy

authenticationTypeEntry row .1.3.6.1.4.1.890.1.5.12.43.59.1.1.1

An entry in authenticationTypeTable.

Indexes

authenticationTypeName

Column	Syntax	OID
authenticationTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.59.1.1.1.1
authenticationTypeMethodList Enable-local: 1, Login-local: 2, radius: 3, tacacs+: 4	OctetStringr/w	.1.3.6.1.4.1.890.1.5.12.43.59.1.1.1.2

accountingTypeTable

table

.1.3.6.1.4.1.890.1.5.12.43.59.2.2 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk accountingTypeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::accountingTypeTable'

Copy

accountingTypeEntry row .1.3.6.1.4.1.890.1.5.12.43.59.2.2.1

An entry in accountingTypeTable.

Indexes

accountingTypeName

Column	Syntax	OID
accountingTypeName	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.1
accountingTypeActive	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.2
accountingTypeBroadcast	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.3
accountingTypeMode	Enumerationr/w Enumerated Values: 1 start-stop 2 stop-only 255 not-available	.1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.4
accountingTypeMethod	Enumerationr/w Enumerated Values: 1 radius 2 tacacs	.1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.5
accountingTypePrivilege	Enumerationr/w Enumerated Values: 0 privilege-0 1 privilege-1 2 privilege-2 3 privilege-3 4 privilege-4 5 privilege-5 6 privilege-6 7 privilege-7 8 privilege-8 9 privilege-9 10 privilege-10 11 privilege-11 12 privilege-12 13 privilege-13 14 privilege-14 255 not-available	.1.3.6.1.4.1.890.1.5.12.43.59.2.2.1.6

xdsl2ExtLineTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.1.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtLineTable'

Copy

The table xdsl2ExtLineTable extends xdsl2LineTable for ZyXEL product.

xdsl2ExtLineEntry row .1.3.6.1.4.1.890.1.5.12.43.60.1.1.1

The table xdsl2ExtLineTable contains extra functions besides those in
xdsl2LineTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xdsl2LineCmndConfSelt Trigger a SELT(Single End Loop Test) for the line. Note the loop should be open.	VDSL2-LINE-TC-MIBXdsl2LineLdsfr/w Type Values: 0 inhibit 1 force	.1.3.6.1.4.1.890.1.5.12.43.60.1.1.1.1

xdsl2ExtLineBandTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.1.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtLineBandTable'

Copy

The table xdsl2ExtLineBandTable extends xdsl2LineBandTable for 
ZyXEL product.

xdsl2ExtLineBandEntry row .1.3.6.1.4.1.890.1.5.12.43.60.1.2.1

The table xdsl2ExtLineBandTable contains extra per-band line
status parameters besides those in xdsl2LineBandTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2LineBand

Column	Syntax	OID
xdsl2LineBandStatusActAtp Actual Aggregate Transmit Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.	0.1 dBmInteger32 Constraints: range: 2147483647-2147483647 range: -310-310	.1.3.6.1.4.1.890.1.5.12.43.60.1.2.1.1
xdsl2LineBandStatusActRxPwr Actual Aggregate Receive Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.	0.1 dBmInteger32 Constraints: range: -255-255 range: 2147483647-2147483647	.1.3.6.1.4.1.890.1.5.12.43.60.1.2.1.2

xdsl2ExtLineSegmentTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.2.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineSegmentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtLineSegmentTable'

Copy

The table xdsl2ExtLineSegmentTable extends xdsl2LineSegmentTable for 
ZyXEL product.

xdsl2ExtLineSegmentEntry row .1.3.6.1.4.1.890.1.5.12.43.60.2.1.1

The table xdsl2LineExtSegmentEntry contains extra line segment
status parameters besides those in xdsl2LineSegmentTable.

This table stores HLOG/QLN/SNR measured during initialization.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2LineSegmentDirection VDSL2-LINE-MIBxdsl2LineSegment

Column	Syntax	OID
xdsl2LineSegmentLog This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentLog.	dBOctetString Constraints: range: 0-1024	.1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.1
xdsl2LineSegmentQln This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentQln.	dBm/HzOctetString Constraints: range: 0-512	.1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.2
xdsl2LineSegmentSnr This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentSnr.	0.5 dBOctetString Constraints: range: 0-512	.1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.3
xdsl2LineSegmentStatus This parameter indicates whether the Hlog/Qln/Snr data is ready.	Bits Enumerated Values: 0 hlogReady 1 qlnReady 2 snrReady	.1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.4
xdsl2LineSegmentLogScGroupSize Number of subcarriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for …	Unsigned32 Constraints: range: 8-8 range: 4-4 range: 1-2	.1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.5
xdsl2LineSegmentQlnScGroupSize Number of subcarriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is eq…	Unsigned32 Constraints: range: 8-8 range: 4-4 range: 1-2	.1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.6
xdsl2LineSegmentSnrScGroupSize Number of subcarriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the siz…	Unsigned32 Constraints: range: 1-2 range: 8-8 range: 4-4	.1.3.6.1.4.1.890.1.5.12.43.60.2.1.1.7

xdsl2ExtSCStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.2.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSCStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtSCStatusTable'

Copy

The table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for 
ZyXEL product.

xdsl2ExtSCStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.60.2.3.1

The table xdsl2ExtSCStatusTable contains extra subcarrier
status parameters besides those in xdsl2LineSegmentTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusDirection

Column	Syntax	OID
xdsl2SCStatusActAtp Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dBm (Physical va…	0.1 dBmInteger32 Constraints: range: 2147483647-2147483647 range: -310-310	.1.3.6.1.4.1.890.1.5.12.43.60.2.3.1.1

xdsl2ExtSCStatusBandTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.2.4 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSCStatusBandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtSCStatusBandTable'

Copy

The table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for 
ZyXEL product.

xdsl2ExtSCStatusBandEntry row .1.3.6.1.4.1.890.1.5.12.43.60.2.4.1

The table xdsl2ExtSCStatusBandTable contains extra subcarrier
status parameters that are grouped per-band besides those in
xdsl2SCStatusBandTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusBand

Column	Syntax	OID
xdsl2SCStatusBandSnrMargin SNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for a…	0.1 dBInteger32 Constraints: range: 2147483646-2147483647 range: -640-630	.1.3.6.1.4.1.890.1.5.12.43.60.2.4.1.1

xdsl2ExtSeltStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.2.6 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtSeltStatusTable'

Copy

The table xdsl2ExtSeltStatusTable contains SELT status.

xdsl2ExtSeltStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.60.2.6.1

The table xdsl2ExtSeltStatusEntry contains SELT status.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xdsl2SeltStatusLineType	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.60.2.6.1.2
xdsl2SeltStatusLineLength	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.60.2.6.1.3

xdsl2ExtSeltReflectionStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.2.7 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtSeltReflectionStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtSeltReflectionStatusTable'

Copy

The table xdsl2ExtSeltReflectionStatusTable contains SELT status 
for each reflection.

xdsl2ExtSeltReflectionStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.60.2.7.1

The table xdsl2ExtSeltReflectionStatusTable contains SELT status
for each reflection.

Indexes

IF-MIBifIndex xdsl2SeltReflection

Column	Syntax	OID
xdsl2SeltReflection	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.1
xdsl2SeltDelay	0.1SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.2
xdsl2SeltError	0.1SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.3
xdsl2SeltAtn180kHz	0.1SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.4
xdsl2SeltAtn300kHz	0.1SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.5
xdsl2SeltFitError	0.1SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.6
xdsl2SeltFitTermination	0.2SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.60.2.7.1.7

xdsl2ExtPMLineCurrTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1 · 1 row entry · 29 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtPMLineCurrTable'

Copy

The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.

xdsl2ExtPMLineCurrEntry row .1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1

The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLCurrUnit

Column	Syntax	OID
xdsl2PMLSinceLinkFecs Count of seconds since last link up that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.1
xdsl2PMLSinceLinkEs Count of seconds since last link up that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RD…	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.2
xdsl2PMLSinceLinkSes Count of seconds since last link up that that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE anomalies in one or m…	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.3
xdsl2PMLSinceLinkLoss Count of seconds since last link up that there was LOS (or LOS-FE for xTU-R).	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.4
xdsl2PMLSinceLinkUas Count of seconds in Unavailability State since last line up. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.5
xdsl2PMLSinceLinkLofs Count of seconds since last link up that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.6
xdsl2PMLSinceLinkLol Count of times the line loss of link since last link up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.7
xdsl2PMLSinceLinkLols Count of seconds since last link up that there was Loss of Link .	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.8
xdsl2PMLSinceLinkLpr Count of the line loss of power since last link up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.9
xdsl2PMLSinceLinkLprs Count of seconds since last link up that there was Loss of Power .	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.10
xdsl2PMLCurr15MLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.11
xdsl2PMLCurr15MLol Count of times during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.12
xdsl2PMLCurr15MLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.13
xdsl2PMLCurr15MLpr Count of times during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.14
xdsl2PMLCurr15MLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.15
xdsl2PMLCurr1DayLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.16
xdsl2PMLCurr1DayLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.17
xdsl2PMLCurr1DayLols Count of seconds during this interval that there was Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.18
xdsl2PMLCurr1DayLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.19
xdsl2PMLCurr1DayLprs Count of seconds during this interval that there was Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.20
xdsl2PMLSinceLinkInmEqInp The INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.21
xdsl2PMLSinceLinkInmIAT The INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the parti…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.22
xdsl2PMLSinceLinkInmME The INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	symbolsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.23
xdsl2PMLCurr15MInmEqInp The INM Equivalent Inp histogram during this 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular inde…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.24
xdsl2PMLCurr15MInmIAT The INM Inter Arrival Time histogram during this 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.25
xdsl2PMLCurr15MInmME The INM total measurement during this 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.26
xdsl2PMLCurr1DayInmEqInp The INM Equivalent Inp histogram during this 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular ind…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.27
xdsl2PMLCurr1DayInmIAT The INM Inter Arrival Time histogram during this 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.28
xdsl2PMLCurr1DayInmME The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.1.1.29

xdsl2ExtPMLineHist15MinTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineHist15MinTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtPMLineHist15MinTable'

Copy

The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable.

xdsl2ExtPMLineHist15MinEntry row .1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1

The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLHist15MUnit VDSL2-LINE-MIBxdsl2PMLHist15MInterval

Column	Syntax	OID
xdsl2PMLHist15MLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.1
xdsl2PMLHist15MLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.2
xdsl2PMLHist15MLols Count of seconds during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.3
xdsl2PMLHist15MLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.4
xdsl2PMLHist15MLprs Count of seconds during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.5
xdsl2PMLHist15MInmEqInp The INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index o…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.6
xdsl2PMLHist15MInmIAT The INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the pa…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.7
xdsl2PMLHist15MInmME The INM total measurement during 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.3.1.8

xdsl2ExtPMLineHist1DayTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMLineHist1DayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtPMLineHist1DayTable'

Copy

The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable.

xdsl2ExtPMLineHist1DayEntry row .1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1

The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMLHist1DUnit VDSL2-LINE-MIBxdsl2PMLHist1DInterval

Column	Syntax	OID
xdsl2PMLHist1DLofs Count of seconds during this interval that there was LOF.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.1
xdsl2PMLHist1DLol Count of times during this interval that the line Loss of Link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.2
xdsl2PMLHist1DLols Count of seconds during this interval that the line Loss of Link.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.3
xdsl2PMLHist1DLpr Count of times during this interval that the line Loss of Power.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.4
xdsl2PMLHist1DLprs Count of seconds during this interval that the line Loss of Power.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.5
xdsl2PMLHist1DInmEqInp The INM Equivalent Inp histogram during 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.6
xdsl2PMLHist1DInmIAT The INM Inter Arrival Time histogram during 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the par…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.7
xdsl2PMLHist1DInmME The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.1.4.1.8

xdsl2ExtPMChCurrTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.4.2.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChCurrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtPMChCurrTable'

Copy

The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable.

xdsl2ExtPMChCurrEntry row .1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1

The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChCurrUnit

Column	Syntax	OID
xdsl2PMChSinceLinkUncorrectedCWs Count of codewords that could not be corrected since last link up.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.1
xdsl2PMChCurr15MUncorrectedCWs Count of codewords that could not be corrected since during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.2
xdsl2PMChCurr1DayUncorrectedCWs Count of codewords that could not be corrected since during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.3
xdsl2PMChSinceLinkCodingViolations Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since last link up.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.4
xdsl2PMChSinceLinkCorrectedBlocks Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since last link up.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.2.1.1.5

xdsl2ExtPMChHist15MinTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.4.2.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChHist15MinTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtPMChHist15MinTable'

Copy

The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable.

xdsl2ExtPMChHist15MinEntry row .1.3.6.1.4.1.890.1.5.12.43.60.4.2.2.1

The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChHist15MUnit VDSL2-LINE-MIBxdsl2PMChHist15MInterval

Column	Syntax	OID
xdsl2PMChHist15MUncorrectedCWs Count of codewords that could not be corrected since during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.2.2.1.1

xdsl2ExtPMChHist1DTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.4.2.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtPMChHist1DTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtPMChHist1DTable'

Copy

The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable.

xdsl2ExtPMChHist1DEntry row .1.3.6.1.4.1.890.1.5.12.43.60.4.2.3.1

The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable.

Indexes

IF-MIBifIndex VDSL2-LINE-MIBxdsl2PMChHist1DUnit VDSL2-LINE-MIBxdsl2PMChHist1DInterval

Column	Syntax	OID
xdsl2PMChHist1DayUncorrectedCWs Count of codewords that could not be corrected since during this interval.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.4.2.3.1.1

xdsl2ExtLineConfTemplateTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.5.1.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineConfTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtLineConfTemplateTable'

Copy

The table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable.

xdsl2ExtLineConfTemplateEntry row .1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1

TThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable.

Indexes

VDSL2-LINE-MIBxdsl2LConfTempTemplateName

Column	Syntax	OID
xdsl2LConfTempPortList A port list that indicates which ports this template applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1.1
xdsl2LConfTempInmConfProfile The value of this object identifies the row in the VDSL2/ADSL/ADSL2 and ADSL2+ INM configuration Profile Table, (xdsl2ExtInmConfProfTable) that applies for this DSL line.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.1.1.2

xdsl2ExtLineConfProfTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.5.1.2 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineConfProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtLineConfProfTable'

Copy

The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable.

xdsl2ExtLineConfProfEntry row .1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1

The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable.

Indexes

VDSL2-LINE-MIBxdsl2LConfProfProfileName

Column	Syntax	OID
xdsl2LConfProfBitSwapDs This configuration parameter indicates if the use of bitswap is disabled on downstream direction. The possible values are: disable(0), enable(1)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.1
xdsl2LConfProfBitSwapUs This configuration parameter indicates if the use of bitswap is disabled on upstream direction. The possible values are: disable(0), enable(1)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.2
xdsl2LConfProfPortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.2.1.3

xdsl2ExtInmConfProfTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtInmConfProfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtInmConfProfTable'

Copy

xdsl2ExtInmConfProfTable.

xdsl2ExtInmConfProfEntry row .1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1

xdsl2ExtInmConfProfTable.

Indexes

xdsl2ExtInmConfProfProfileName

Column	Syntax	OID
xdsl2ExtInmConfProfProfileName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.1
xdsl2ExtInmConfProfVtucInpEq The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM-INPEQ-MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the ran…	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.2
xdsl2ExtInmConfProfVturInpEq The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM-INPEQ-MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the ran…	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.3
xdsl2ExtInmConfProfVtucCC The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be comp…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.4
xdsl2ExtInmConfProfVturCC The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be comp…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.5
xdsl2ExtInmConfProfVtucIATO The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.6
xdsl2ExtInmConfProfVturIATO The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.7
xdsl2ExtInmConfProfVtucIATS The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.8
xdsl2ExtInmConfProfVturIATS The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.9
xdsl2ExtInmConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.14
xdsl2ExtInmConfProfPortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.60.5.1.7.1.15

xdsl2ExtChConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.5.2.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtChConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtChConfProfileTable'

Copy

The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable.

xdsl2ExtChConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1

The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable.

Indexes

VDSL2-LINE-MIBxdsl2ChConfProfProfileName

Column	Syntax	OID
xdsl2ChConfProfPhyRDs This configuration parameter defines phy retransmission mode on downstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.1
xdsl2ChConfProfPhyRUs This configuration parameter defines phy retransmission mode on upstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current l…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.2
xdsl2ChConfProfPortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.60.5.2.1.1.3

xdsl2ExtLineAlarmConfTemplateTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.5.3.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineAlarmConfTemplateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtLineAlarmConfTemplateTable'

Copy

The table xdsl2ExtLineAlarConfTemplateTable extends 
xdsl2ExtLineAlarConfTemplateTable.

xdsl2ExtLineAlarmConfTemplateEntry row .1.3.6.1.4.1.890.1.5.12.43.60.5.3.1.1

The table xdsl2ExtLineAlarConfTemplateTable extends
xdsl2ExtLineAlarConfTemplateTable.

Indexes

VDSL2-LINE-MIBxdsl2LAlarmConfTempTemplateName

Column	Syntax	OID
xdsl2LAlarmConfTempPortList A port list that indicates which ports this template applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.60.5.3.1.1.3

xdsl2ExtLineAlarmConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.5.3.2 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtLineAlarmConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtLineAlarmConfProfileTable'

Copy

The table xdsl2ExtLineAlarmConfProfileTable extends 
xdsl2LineAlarmConfProfileTable.

xdsl2ExtLineAlarmConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1

The table xdsl2ExtLineAlarmConfProfileTable extends
xdsl2LineAlarmConfProfileTable.

Indexes

VDSL2-LINE-MIBxdsl2LineAlarmConfProfileName

Column	Syntax	OID
xdsl2LineAlarmConfProfileXtucThresh15MinLofs A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.1
xdsl2LineAlarmConfProfileXturThresh15MinLofs A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.2
xdsl2LAlarmConfProfilePortList A port list that indicates which ports this profile applys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.3
xdsl2LineAlarmConfProfileXturThresh15MinLprs A threshold for the xdsl2PMLCurr15MLprs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter.	secondsHC-PerfHist-TC-MIBHCPerfIntervalThresholdr/w Type Constraints: range: 0..900	.1.3.6.1.4.1.890.1.5.12.43.60.5.3.2.1.4

xdsl2ExtChAlarmConfProfileTable

table

.1.3.6.1.4.1.890.1.5.12.43.60.5.3.3 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdsl2ExtChAlarmConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdsl2ExtChAlarmConfProfileTable'

Copy

The table xdsl2ExtChAlarmConfProfileTable extends 
xdsl2ExtChAlarmConfProfileTable.

xdsl2ExtChAlarmConfProfileEntry row .1.3.6.1.4.1.890.1.5.12.43.60.5.3.3.1

The table xdsl2ExtChAlarmConfProfileTable extends
xdsl2ExtChAlarmConfProfileTable.

Indexes

VDSL2-LINE-MIBxdsl2ChAlarmConfProfileName

Column	Syntax	OID
xdsl2ChAlarmConfProfilePortList A port list that indicates which ports this profileapplys for.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.60.5.3.3.1.3

macBasedVlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.61.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macBasedVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::macBasedVlanTable'

Copy

macBasedVlanEntry row .1.3.6.1.4.1.890.1.5.12.43.61.1.1

An entry in macBasedVlanTable.

Indexes

macBasedVlanMAC

Column	Syntax	OID
macBasedVlanName Name of Mac-Based Vlan.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.61.1.1.1
macBasedVlanMAC Mac address for Mac-Based Vlan	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.5.12.43.61.1.1.2
macBasedVlanVlanId Vlan id for Mac-Based Vlan, 1~4094.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.61.1.1.3
macBasedVlan8021pPriority 802.1p priority for Mac-Based Vlan, 0~7.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.61.1.1.4
macBasedVlanRowstatus Row Status for Mac-Based Vlan	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.61.1.1.5

vlanProfileTable

table

.1.3.6.1.4.1.890.1.5.12.43.62.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanProfileTable'

Copy

vlanProfileEntry row .1.3.6.1.4.1.890.1.5.12.43.62.1.1

An entry in vlanProfileTable.

Indexes

vlanProfileName

Column	Syntax	OID
vlanProfileName Name of vlan Profile.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.62.1.1.1
vlanProfileMacLearning Mac learning for vlan profile	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.890.1.5.12.43.62.1.1.2
vlanProfileUnknownMulticastDrop Drop unknown multicast packets.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.890.1.5.12.43.62.1.1.3
vlanProfileRowStatus Row status for vlan profile	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.62.1.1.4

vlanTable

table

.1.3.6.1.4.1.890.1.5.12.43.62.2 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanTable'

Copy

vlanEntry row .1.3.6.1.4.1.890.1.5.12.43.62.2.1

An entry in vlanTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
profileName Name of vlan Profile.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.62.2.1.1

l2ptTable

table

.1.3.6.1.4.1.890.1.5.12.43.115.3 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk l2ptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::l2ptTable'

Copy

l2ptEntry row .1.3.6.1.4.1.890.1.5.12.43.115.3.1

An entry in l2ptTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
l2ptProtocolGroup L2PT protocols enabled/disabled on the port	Bitsr/w Enumerated Values: 0 cDP 1 sTP 2 vTP	.1.3.6.1.4.1.890.1.5.12.43.115.3.1.1
l2ptPointToPointProtocolGroup L2PT point-to-point protocols enabled/disabled on the port	Bitsr/w Enumerated Values: 0 pAGP 1 lACP 2 uDLD	.1.3.6.1.4.1.890.1.5.12.43.115.3.1.2
l2ptMode L2PT port role on the port	Enumerationr/w Enumerated Values: 1 access 2 tunnel	.1.3.6.1.4.1.890.1.5.12.43.115.3.1.3

vlanMappingPortTable

table

.1.3.6.1.4.1.890.1.5.12.43.116.2 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanMappingPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanMappingPortTable'

Copy

vlanMappingPortEntry row .1.3.6.1.4.1.890.1.5.12.43.116.2.1

An entry in vlanMappingPortTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
vlanMappingPortState	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.116.2.1.1
vlanMappingPortDropMiss	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.116.2.1.2

vlanMappingRuleTable

table

.1.3.6.1.4.1.890.1.5.12.43.116.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk vlanMappingRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::vlanMappingRuleTable'

Copy

vlanMappingRuleEntry row .1.3.6.1.4.1.890.1.5.12.43.116.3.1

An entry in vlan-mapping rule table

Indexes

vlanMappingRulePort vlanMappingRuleVid

Column	Syntax	OID
vlanMappingRuleName The name of vlan-mapping entry	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.116.3.1.1
vlanMappingRulePort interface port id	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.116.3.1.2
vlanMappingRuleVid inner vid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.116.3.1.3
vlanMappingRuleTransVid translated vid	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.116.3.1.4
vlanMappingRulePriority priority	Enumerationr/w Enumerated Values: 0 priority-0 1 priority-1 2 priority-2 3 priority-3 4 priority-4 5 priority-5 6 priority-6 7 priority-7	.1.3.6.1.4.1.890.1.5.12.43.116.3.1.5
vlanMappingRuleRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.116.3.1.6
vlanMappingRuleReplacePrio Replace Original Priority	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.116.3.1.7

transceiverSerialInfoTable

table

.1.3.6.1.4.1.890.1.5.12.43.117.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverSerialInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::transceiverSerialInfoTable'

Copy

transceiverSerialInfoEntry row .1.3.6.1.4.1.890.1.5.12.43.117.1.1

An entry in transceiverSerialInfoTable.

Indexes

transceiverSerialInfoEntryPort

Column	Syntax	OID
transceiverSerialInfoEntryPort Index of transceiverSerialInfo. It is referred to dot1dBasePort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.117.1.1.1
transceiverSerialInfoEntryStatus Transceiver module status.	Enumeration Enumerated Values: 1 ok-with-DDM 2 ok-without-DDM 3 nonoperational	.1.3.6.1.4.1.890.1.5.12.43.117.1.1.2
transceiverSerialInfoEntryVendor Transceiver module vendor name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.117.1.1.3
transceiverSerialInfoEntryPartNo Part number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.117.1.1.4
transceiverSerialInfoEntrySerialNo Serial number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.117.1.1.5
transceiverSerialInfoEntryRevision Revision level for part number provided by transceiver module vendor.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.117.1.1.6
transceiverSerialInfoEntryDateCode Transceiver module vendor's manufacturing date code	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.117.1.1.7
transceiverSerialInfoEntryTransceiver Transceiver module type names	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.117.1.1.8

transceiverDdmInfoTable

table

.1.3.6.1.4.1.890.1.5.12.43.117.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk transceiverDdmInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::transceiverDdmInfoTable'

Copy

transceiverDdmInfoEntry row .1.3.6.1.4.1.890.1.5.12.43.117.2.1

An entry in transceiverDdmInfoTable.

Indexes

transceiverDdmInfoEntryPort transceiverDdmInfoEntryType

Column	Syntax	OID
transceiverDdmInfoEntryPort Index of transceiverDdmInfo. This will be referred to dot1dBasePort	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.117.2.1.1
transceiverDdmInfoEntryType Transceiver module status.	Enumeration Enumerated Values: 1 temperature 2 voltage 3 bias 4 txPower 5 rxPower	.1.3.6.1.4.1.890.1.5.12.43.117.2.1.2
transceiverDdmInfoEntryAlarmMax Transceiver module vendor name.	0.01SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.117.2.1.3
transceiverDdmInfoEntryAlarmMin Part number provided by transceiver module vendor.	0.01SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.117.2.1.4
transceiverDdmInfoEntryWarnMax Serial number provided by transceiver module vendor.	0.01SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.117.2.1.5
transceiverDdmInfoEntryWarnMin Revision level for part number provided by transceiver module vendor.	0.01SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.117.2.1.6
transceiverDdmInfoEntryCurrent Transceiver module vendor's manufacturing date code	0.01SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.117.2.1.7
transceiverDdmInfoEntryDescription Transceiver module type names	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.117.2.1.8

pppoeIATable

table

.1.3.6.1.4.1.890.1.5.12.43.119.2.2 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pppoeIATable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::pppoeIATable'

Copy

pppoeIAEntry row .1.3.6.1.4.1.890.1.5.12.43.119.2.2.1

An entry in pppoeIATable.

Indexes

pppoeIAVID

Column	Syntax	OID
pppoeIAVID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.1
pppoeIACircuitIDInfoEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.2
pppoeIACircuitIDInfoData	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.3
pppoeIARemoteIDEnable	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.4
pppoeIARemoteIDData	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.5
pppoeIARowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.6
pppoeIARemoteIDType <1:port | 2:system>	Enumerationr/w Enumerated Values: 1 port 2 system	.1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.7
pppoeIACircuitIDType <1:hostname | 2:system>	Enumerationr/w Enumerated Values: 1 hostname 2 system	.1.3.6.1.4.1.890.1.5.12.43.119.2.2.1.8

pvcRuleTable

table

.1.3.6.1.4.1.890.1.5.12.43.120.1 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk pvcRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::pvcRuleTable'

Copy

pvcRuleEntry row .1.3.6.1.4.1.890.1.5.12.43.120.1.1

An entry in PVC rule table

Indexes

pvcRulePort pvcRuleVpi pvcRuleVci

Column	Syntax	OID
pvcRulePort interface port id	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.1
pvcRuleVpi VPI	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.2
pvcRuleVci VCI	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.3
pvcRulePvid PVID	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.4
pvcRuleEncap ATM encapulation method	Enumerationr/w Enumerated Values: 0 llc 1 vc	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.5
pvcRulePriority priority	Enumerationr/w Enumerated Values: 0 priority-0 1 priority-1 2 priority-2 3 priority-3 4 priority-4 5 priority-5 6 priority-6 7 priority-7	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.6
pvcRuleFCS Frame Check Sequence of PDU is preserved or not.	Enumerationr/w Enumerated Values: 0 fcs 1 no-fcs	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.7
pvcRuleMVlan Multicast VLAN pass through.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.8
pvcRuleRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.120.1.1.9

ippvcRuleTable

table

.1.3.6.1.4.1.890.1.5.12.43.120.2 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk ippvcRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::ippvcRuleTable'

Copy

ippvcRuleEntry row .1.3.6.1.4.1.890.1.5.12.43.120.2.1

An entry in IPPVC rule table

Indexes

ippvcRulePort ippvcRuleVpi ippvcRuleVci

Column	Syntax	OID
ippvcRulePort interface port id	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.1
ippvcRuleVpi VPI	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.2
ippvcRuleVci VCI	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.3
ippvcRulePvid PVID	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.4
ippvcRuleEncap ATM encapulation method	Enumerationr/w Enumerated Values: 0 llc 1 vc	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.5
ippvcRulePriority priority	Enumerationr/w Enumerated Values: 0 priority-0 1 priority-1 2 priority-2 3 priority-3 4 priority-4 5 priority-5 6 priority-6 7 priority-7	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.6
ippvcRuleSubnetIp IP address of the subscriber intranet	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.7
ippvcRuleSubnetMask netmask of the subscriber intranet	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.8
ippvcRuleDefaultRoute default route for outgoing traffic	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.9
ippvcRuleRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.120.2.1.10

paepvcRuleTable

table

.1.3.6.1.4.1.890.1.5.12.43.120.3 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk paepvcRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::paepvcRuleTable'

Copy

paepvcRuleEntry row .1.3.6.1.4.1.890.1.5.12.43.120.3.1

An entry in PAEPVC rule table

Indexes

paepvcRulePort paepvcRuleVpi paepvcRuleVci

Column	Syntax	OID
paepvcRulePort interface port id	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.3.1.1
paepvcRuleVpi VPI	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.3.1.2
paepvcRuleVci VCI	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.3.1.3
paepvcRulePvid PVID	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.120.3.1.4
paepvcRuleEncap ATM encapulation method	Enumerationr/w Enumerated Values: 0 llc 1 vc	.1.3.6.1.4.1.890.1.5.12.43.120.3.1.5
paepvcRulePriority priority	Enumerationr/w Enumerated Values: 0 priority-0 1 priority-1 2 priority-2 3 priority-3 4 priority-4 5 priority-5 6 priority-6 7 priority-7	.1.3.6.1.4.1.890.1.5.12.43.120.3.1.6
paepvcRuleRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.120.3.1.7

xdslBondingConfigTable

table

.1.3.6.1.4.1.890.1.5.12.43.121.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdslBondingConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdslBondingConfigTable'

Copy

xdslBondingConfigEntry row .1.3.6.1.4.1.890.1.5.12.43.121.1.1

An entry in xdslBondingConfigTable.

Indexes

xdslBondingConfigName

Column	Syntax	OID
xdslBondingConfigName Name of Xdsl Bonding Group.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.12.43.121.1.1.1
xdslBondingConfigMemberPort Member Ports of Bonding Group	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.12.43.121.1.1.2
xdslBondingConfigRowStatus Row status for vlan profile	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.12.43.121.1.1.3

xdslBondingStatusTable

table

.1.3.6.1.4.1.890.1.5.12.43.121.2 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk xdslBondingStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::xdslBondingStatusTable'

Copy

xdslBondingStatusEntry row .1.3.6.1.4.1.890.1.5.12.43.121.2.1

An entry in xdslBondingStatusTable.

Indexes

xdslBondingConfigName

Column	Syntax	OID
xdslBondingStatusActive Active(1), Inactive(2)	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.121.2.1.1
xdslBondingStatusMemberPort Member Ports of Bonding Group	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.121.2.1.2
xdslBondingStatusActivePort Active Ports of Bonding Group	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.5.12.43.121.2.1.3
xdslBondingStatusMainPort Main Port of Bonding Group. 4294967295(0xffffffff) for Null Value	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.121.2.1.4
xdslBondingStatusFlagType Flag Type. 4294967295(0xffffffff) for Null Value	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.121.2.1.5
xdslBondingStatusRateUs Up-stream Group Rate. 4294967295(0xffffffff) for Null Value	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.121.2.1.6
xdslBondingStatusRateDs Down-stream Group Rate. 4294967295(0xffffffff) for Null Value	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.12.43.121.2.1.7

macFlushTable

table

.1.3.6.1.4.1.890.1.5.12.43.122.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the zyxel variant from /opt/observium/mibs/zyxel.

Command help

Walk macFlushTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ves1608FE57-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ves1608FE57-MIB::macFlushTable'

Copy

macFlushEntry row .1.3.6.1.4.1.890.1.5.12.43.122.1.1

An entry in macFlushTable.

Indexes

macFlushPortIndex

Column	Syntax	OID
macFlushPortIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.122.1.1.1
macFlushPortConfig Set 1 to execute mac flush operation in the specified port, read value will always return 0	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.12.43.122.1.1.2