ZYXEL-VRRP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
17
zyxelVrrpTable
table.1.3.6.1.4.1.890.1.15.3.91.1.2
·
1 row entry
·
10 columns
Uses the zyxel variant from
Command help
/opt/observium/mibs/zyxel.
Walk zyxelVrrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-VRRP-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-VRRP-MIB::zyxelVrrpTable'
The table contains VRRP configuration.
An entry contains VRRP configuration.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Enter a virtual router number for which this VRRP entry is created.
You can configure up to seven virtual routers for one network. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.1 |
||||||||||||
|
IP address of the uplink gateway in dotted decimal notation.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.2 |
||||||||||||
|
Enable/Disable preempt mode
|
P-BRIDGE-MIBEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.3 |
||||||||||||
|
Specify the number of seconds between hello message transmissions. The default is 1.
|
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.4 |
||||||||||||
|
Set the priority level. The number is bigger, the priority is higher.
|
Integer32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.5 |
||||||||||||
|
The IP address of the primary virtual router in dotted decimal notation.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.6 |
||||||||||||
|
A descriptive name for identification purposes
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.7 |
||||||||||||
|
This is optional. The IP address of a secondary virtual router in dotted decimal notation.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.8 |
||||||||||||
|
Enable/Disable virtual router to response ping.
|
P-BRIDGE-MIBEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.9 |
||||||||||||
|
This object allows entries to be created and deleted from the VRRP table.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.890.1.15.3.91.1.2.1.10 |
zyxelVrrpDomainTable
table.1.3.6.1.4.1.890.1.15.3.91.1.3
·
1 row entry
·
2 columns
Uses the zyxel variant from
Command help
/opt/observium/mibs/zyxel.
Walk zyxelVrrpDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-VRRP-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-VRRP-MIB::zyxelVrrpDomainTable'
The table contains VRRP domain configuration.
An entry contains VRRP domain configuration.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Select None to disable authentication. This is the default setting.
Select Simple to use a simple password to authenticate VRRP packet exchanges on this interface |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.890.1.15.3.91.1.3.1.1 |
||||
|
When you select simple in the authentication field, enter a password key in this field
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.890.1.15.3.91.1.3.1.2 |
zyxelVrrpInfoTable
table.1.3.6.1.4.1.890.1.15.3.91.2.1
·
1 row entry
·
5 columns
Uses the zyxel variant from
Command help
/opt/observium/mibs/zyxel.
Walk zyxelVrrpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-VRRP-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-VRRP-MIB::zyxelVrrpInfoTable'
The table contains VRRP information.
An entry contains VRRP information.
| Column | Syntax | OID |
|---|---|---|
|
The IP address of an IP routing domain that is associated to a virtual router.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.890.1.15.3.91.2.1.1.1 |
|
The subnet mask bits of an IP routing domain that is associated to a virtual router.
|
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.890.1.15.3.91.2.1.1.2 |
|
Display the ID number of the virtual router.
|
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.890.1.15.3.91.2.1.1.3 |
|
Display the status of the virtual router.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.890.1.15.3.91.2.1.1.4 |
|
Display the status of the link between this switch and the uplink gateway.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.890.1.15.3.91.2.1.1.5 |