ZYXEL-VLAN-STACK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
10

zyxelVlanStackPortTable

table
.1.3.6.1.4.1.890.1.15.3.89.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelVlanStackPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-VLAN-STACK-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-VLAN-STACK-MIB::zyxelVlanStackPortTable' 
The table contains VLAN stack configuration.
zyxelVlanStackPortEntry row .1.3.6.1.4.1.890.1.15.3.89.1.2.1
An entry contains VLAN stack configuration.
Indexes
Column Syntax OID
zyVlanStackPortMode
VLAN stacking mode of the port:
Set Normal mode to have the switch ignore frames received(or transmitted) on this port with VLAN stacking tags.
Set Access mode to have the switch add the SP TPID tag to all incoming fra…
Enumerationr/w
Enumerated Values:
1normal
2access
3tunnel
 .1.3.6.1.4.1.890.1.15.3.89.1.2.1.1
zyVlanStackPortVid
Stacking port VLAN ID is the service provider's VLAN ID (the outer VLAN tag).
Set the service provider ID (from 1 to 4094) for frames received on this port.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.89.1.2.1.2
zyVlanStackPortPriority
Set a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames received on this port.
0 is the lowest priority level and 7 is the highest.
Enumerationr/w
Enumerated Values:
0priority0
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
 .1.3.6.1.4.1.890.1.15.3.89.1.2.1.3
zyVlanStackTunnelPortTpid
TPID is a standard Ethernet type code identifying the frame and indicates whether the frame carries IEEE 802.1Q tag information.
Set a four-digit hexadecimal number from 0000 to FFFF that the switch adds in the outer V…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.89.1.2.1.4

zyxelSelectiveQinQTable

table
.1.3.6.1.4.1.890.1.15.3.89.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelSelectiveQinQTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-VLAN-STACK-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-VLAN-STACK-MIB::zyxelSelectiveQinQTable' 
The table contains selective Q-in-Q configuration.
zyxelSelectiveQinQEntry row .1.3.6.1.4.1.890.1.15.3.89.1.4.1
An entry contains selective Q-in-Q configuration.
Indexes
Column Syntax OID
zySelectiveQinQName
Set the name of selective Q-in-Q entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.89.1.4.1.1
zySelectiveQinQPort
Interface port ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.89.1.4.1.2
zySelectiveQinQCvid
The customer VLAN ID (the inner VLAN tag) from 1 to 4094.
This is the VLAN tag carried in the packets from the subscribers.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.89.1.4.1.3
zySelectiveQinQSpvid
Stacking port VLAN ID is the service provider's VLAN ID (the outer VLAN tag).
Set the service provider ID (from 1 to 4094) for frames received on this port.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.89.1.4.1.4
zySelectiveQinQPriority
Set a priority level (from 0 to 7). This is the service provider's priority level that adds to the frames received on this port.
0 is the lowest priority level and 7 is the highest.
Enumerationr/w
Enumerated Values:
0priority0
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
 .1.3.6.1.4.1.890.1.15.3.89.1.4.1.5
zySelectiveQinQRowStatus
This object allows entries to be created and deleted from the selective Q-in-Q table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.89.1.4.1.6