ZYXEL-SNMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
26

zyxelSnmpTrapDestinationTable

table
.1.3.6.1.4.1.890.1.15.3.76.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelSnmpTrapDestinationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-SNMP-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-SNMP-MIB::zyxelSnmpTrapDestinationTable' 
The table contains SNMP trap destination configuration.
zyxelSnmpTrapDestinationEntry row .1.3.6.1.4.1.890.1.15.3.76.1.5.1
An entry contains SNMP trap destination configuration.
Indexes
Column Syntax OID
zySnmpTrapDestinationIpAddress
Destination IP address of trap server.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.15.3.76.1.5.1.1
zySnmpTrapDestinationUdpPort
The UDP port that the manager listens for SNMP traps.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.76.1.5.1.2
zySnmpTrapDestinationVersion
Specify the version of the SNMP trap messages.
Enumerationr/w
Enumerated Values:
0v1
1v2c
2v3
 .1.3.6.1.4.1.890.1.15.3.76.1.5.1.3
zySnmpTrapDestinationUserName
Username that is sent to the SNMP manager along with the SNMP v3 trap.
This username must match an existing account on the switch.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.76.1.5.1.4
zySnmpTrapDestinationRowStatus
This object allow entries to be created and deleted from SNMP trap destination table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.76.1.5.1.5

zyxelSnmpUserTable

table
.1.3.6.1.4.1.890.1.15.3.76.1.7 · 1 row entry · 5 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelSnmpUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-SNMP-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-SNMP-MIB::zyxelSnmpUserTable' 
The table contains SNMP user configuration.
zyxelSnmpUserEntry row .1.3.6.1.4.1.890.1.15.3.76.1.7.1
An entry contains SNMP user configuration.
Indexes
Column Syntax OID
zySnmpUserName
The username of a login account on the switch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.76.1.7.1.1
zySnmpUserSecurityLevel
Select whether you want to implement authentication and/or encryption for SNMP communication from this user.
Enumeration
Enumerated Values:
0noAuthNoPriv
1authNoPriv
2authPriv
 .1.3.6.1.4.1.890.1.15.3.76.1.7.1.2
zySnmpUserAuthenticationProtocol
The type of authentication protocol to be used.
Enumeration
Enumerated Values:
0md5
1sha
 .1.3.6.1.4.1.890.1.15.3.76.1.7.1.3
zySnmpUserPrivacyProtocol
The type of privacy protocol to be used.
Enumeration
Enumerated Values:
0des
1aes
 .1.3.6.1.4.1.890.1.15.3.76.1.7.1.4
zySnmpUserGroup
The group name which this user belongs to.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.76.1.7.1.5

zyxelSnmpTrapGroupTable

table
.1.3.6.1.4.1.890.1.15.3.76.1.8 · 1 row entry · 5 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelSnmpTrapGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-SNMP-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-SNMP-MIB::zyxelSnmpTrapGroupTable' 
The table cantains SNMP trap group configuration.
zyxelSnmpTrapGroupEntry row .1.3.6.1.4.1.890.1.15.3.76.1.8.1
An entry cantains SNMP trap group configuration.
Indexes
Column Syntax OID
zySnmpTrapSysGroup
System group of SNMP trap that the switch sends to the SNMP manager.
Bitsr/w
Enumerated Values:
0coldStart
1warmStart
2fanSpeed
3temperature
4voltage
5reset
6timeSync
7intrusionlock
8bps
9maintainence
10externalalarm
11powerportfailed
12errorlog
13loopGuard
14errdisable
15dyinggasp
16poe
17fanairflow
18stacking
19powerSource
20loginRecord
 .1.3.6.1.4.1.890.1.15.3.76.1.8.1.1
zySnmpTrapInterfaceGroup
Interface group of SNMP trap that the switch sends to the SNMP manager.
Bitsr/w
Enumerated Values:
0linkup
1linkdown
2autonegotiation
3lldp
4transceiverDdm
5module
6stormControl
7zuld
 .1.3.6.1.4.1.890.1.15.3.76.1.8.1.2
zySnmpTrapAAAGroup
AAA group of SNMP trap that the switch sends to the SNMP manager.
Bitsr/w
Enumerated Values:
0authentication
1authorization
2accounting
 .1.3.6.1.4.1.890.1.15.3.76.1.8.1.3
zySnmpTrapIPGroup
IP group of SNMP trap that the switch sends to the SNMP manager.
Bitsr/w
Enumerated Values:
0ping
1traceroute
 .1.3.6.1.4.1.890.1.15.3.76.1.8.1.4
zySnmpTrapSwitchGroup
Switch group of SNMP trap that the switch sends to the SNMP manager.
Bitsr/w
Enumerated Values:
0stp
1mactable
2rmon
3cfm
4classifier
5rip
6ospf
 .1.3.6.1.4.1.890.1.15.3.76.1.8.1.5

zyxelSnmpTrapPortTable

table
.1.3.6.1.4.1.890.1.15.3.76.1.9 · 1 row entry · 11 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelSnmpTrapPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-SNMP-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-SNMP-MIB::zyxelSnmpTrapPortTable' 
The table contains SNMP trap port configuration.
zyxelSnmpTrapPortEntry row .1.3.6.1.4.1.890.1.15.3.76.1.9.1
An entry contains SNMP trap port configuration.
Indexes
Column Syntax OID
zySnmpTrapPortIntrusionlockState
Enabled/Disabled SNMP intrusionlock trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.1
zySnmpTrapPortLoopguardState
Enabled/Disabled SNMP loopguard trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.2
zySnmpTrapPortErrdisableState
Enabled/Disabled SNMP errdisable trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.3
zySnmpTrapPortPoeState
Enabled/Disabled SNMP PoE trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.4
zySnmpTrapPortLinkupState
Enabled/Disabled SNMP linkUp trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.5
zySnmpTrapPortLinkdownState
Enabled/Disabled SNMP linkDown trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.6
zySnmpTrapPortAutonegotiationState
Enabled/Disabled SNMP LLDP trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.7
zySnmpTrapPortLldpState
Enabled/Disabled SNMP autonegotiation trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.8
zySnmpTrapPortTransceiverDdmState
Enabled/Disabled SNMP Transceiver-ddm trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.9
zySnmpTrapPortStormControlState
Enabled/Disabled SNMP storm-control trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.10
zySnmpTrapPortZuldState
Enabled/Disabled SNMP ZULD trap on the sepcified port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.76.1.9.1.11