ZYXEL-SESCOMMON-MIB Table View

This table contains the current status of SHDSL line. 
These managed objects are supported by ZyXEL SDSL
access switches.

sesLineStatusEntry row .1.3.6.1.4.1.890.1.5.5.1.1.1

An zyxelLineStatusEntry containing the specific
status for a particular SHDSL interface.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
sesLineUptimemandatory The time duration since the connection between STU-C STU-R is last setup.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.1
sesLineLinkDownmandatory The number of link down since the SAM-1008 was last restarted.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.2
sesLineNMdefectmandatory Count of noise margin defects	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.3
sesLineHECdefectmandatory Count of HEC defects	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.4
sesLineTxPacketsmandatory Count of line Tx packets	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.5
sesLineRxPacketsmandatory Count of line Rx packets	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.6
sesLineTxFramesmandatory Count of line Tx frames	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.7
sesLineRxFramesmandatory Count of line Rx frames	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.8
sesLineTxCellsmandatory Count of line Tx cells	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.9
sesLineRxCellsmandatory Count of line Rx cells	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.5.1.1.1.10

This table includes common attributes describing the SHDSL line.

sesLineConfEntry row .1.3.6.1.4.1.890.1.5.5.1.3.1

An entry in sesLineConfTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
sesLineConfEncapmandatory The encapsulation of the SHDSL line.	Enumerationr/w Enumerated Values: 1 llc 2 vc	.1.3.6.1.4.1.890.1.5.5.1.3.1.1
sesLineConfVpimandatory The VPI of the SHDSL line.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.5.1.3.1.2
sesLineConfVcimandatory The VCI of the SHDSL line.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.5.1.3.1.3

This table includes the configuration of port bonding.

sesPortBondingEntry row .1.3.6.1.4.1.890.1.5.5.1.5.1

An entry in sesPortBondingTable.

Indexes

sesPortBondingName

Column	Syntax	OID
sesPortBondingNamemandatory This object is used by the port bonding table in order to identify a row of this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.5.1.5.1.1
sesPortBondingNumOfMembersmandatory The number of members included in the bonding entry.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.5.1.5.1.2
sesPortBondingMemberListmandatory The member list is included in the bonding entry. Each member is identified by two octets. In the 2-wire mode, each member stands for a single port. In the 4-wire mode, each member stands for a 4-wire group. In the 8-wi…	OctetStringr/w	.1.3.6.1.4.1.890.1.5.5.1.5.1.3
sesPortBondingModemandatory The mode in which the bonding entry is. twoWireC mode stands for 2-wire plus stu-c, and so on.	Enumerationr/w Enumerated Values: 1 twoWireC 2 twoWireR 3 fourWireC 4 fourWireR 5 eightWireC 6 eightWireR	.1.3.6.1.4.1.890.1.5.5.1.5.1.4
sesPortBondingRowStatusmandatory To delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.5.1.5.1.5

This table includes N-wire configurations.

sesNwireEntry row .1.3.6.1.4.1.890.1.5.5.1.6.1

An entry in sesNwireTable.

Indexes

sesNwireGroupName

Column	Syntax	OID
sesNwireGroupNamemandatory This object is used by the N-wire table in order to identify a row of this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.890.1.5.5.1.6.1.1
sesNwireGroupNumbermandatory The group number included in the N-wire entry. Each group is identified by two octets. In the 4-wire mode: Group1 stands for Port1 and Port2 Group2 stands for Port3 and Port4 Group3 stands for Port5 and Port6 Group4 sta…	OctetStringr/w	.1.3.6.1.4.1.890.1.5.5.1.6.1.2
sesNwireModemandatory The mode in which the N-wire entry is. fourWireC mode stands for 4-wire plus stu-c, and so on.	Enumerationr/w Enumerated Values: 1 fourWireC 2 fourWireR 3 eightWireC 4 eightWireR	.1.3.6.1.4.1.890.1.5.5.1.6.1.3
sesNwireRowStatusmandatory To delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.5.1.6.1.4