ZYXEL-PPPoE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
11

zyxelPppoeIaPortTable

table
.1.3.6.1.4.1.890.1.15.3.67.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPppoeIaPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-PPPoE-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-PPPoE-MIB::zyxelPppoeIaPortTable' 
The table contains PPPoE intermediate agent on the specified port configuration.
zyxelPppoeIaPortEntry row .1.3.6.1.4.1.890.1.15.3.67.1.7.1
An entry contains PPPoE intermediate agent on the specified port configuration
Indexes
Column Syntax OID
zyPppoeIaPortTrustState
Enable/Disable trusted port on the specified port.
Trusted ports are uplink ports connected to PPPoE servers.
If a PADO (PPPoE Active Discovery Offer), PADS (PPPoE Active Discovery Session-confirmation), or PADT (PPPo…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.67.1.7.1.1
zyPppoeIaPortCircuitIdString
Enter a string of up to 63 ASCII characters that the switch adds into the Agent Circuit ID
sub-option for PPPoE discovery packets received on this port. Spaces are allowed.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.67.1.7.1.2
zyPppoeIaPortRemoteIdString
Enter a string of up to 63 ASCII characters that the switch adds into the Agent Remote ID sub-option
for PPPoE discovery packets received on this port. Space are allows. If you do not specify a string
here or in the R…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.67.1.7.1.3

zyxelPppoeIaVlanTable

table
.1.3.6.1.4.1.890.1.15.3.67.1.9 · 1 row entry · 4 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPppoeIaVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-PPPoE-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-PPPoE-MIB::zyxelPppoeIaVlanTable' 
The table contains PPPoE intermediate agent for the specified VLAN configuration.
zyxelPppoeIaVlanEntry row .1.3.6.1.4.1.890.1.15.3.67.1.9.1
An entry contains PPPoE intermediate agent for the specified VLAN configuration.
Indexes
Column Syntax OID
zyPppoeIaVlanVid
VLAN ID you want to configure.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.890.1.15.3.67.1.9.1.1
zyPppoeIaVlanCircuitIdState
Enable/Disable circuit ID setting for a specific VLAN take effect
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.67.1.9.1.2
zyPppoeIaVlanRemoteIdState
Enable/Disable remote ID settings for a specific VLAN take effect.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.67.1.9.1.3
zyPppoeIaVlanRowStatus
This object allows entries to be created and deleted from the PPPoE IA VLAN table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.67.1.9.1.4

zyxelPppoeIaPortVlanTable

table
.1.3.6.1.4.1.890.1.15.3.67.1.11 · 1 row entry · 4 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPppoeIaPortVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-PPPoE-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-PPPoE-MIB::zyxelPppoeIaPortVlanTable' 
The table contains PPPoE intermediate agent for the specified VLAN on the specified port configuration.
zyxelPppoeIaPortVlanEntry row .1.3.6.1.4.1.890.1.15.3.67.1.11.1
An entry contains PPPoE intermediate agent for the specified VLAN on the specified port configuration
Indexes
Column Syntax OID
zyPppoeIaPortVlanVid
VLAN ID you want to configure.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.67.1.11.1.1
zyPppoeIaPortVlanCircuitIdString
A string of up to 63 ASCII characters that the switch adds into the agent circuit ID sub-option for
PPPoE discovery packets received on this VLAN on the specified port. The circuit ID you configure for
a specific VLAN…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.67.1.11.1.2
zyPppoeIaPortVlanRemoteIdString
A string of up to 63 ASCII characters that the switch adds into the agent remote ID sub-option for
PPPoE discovery packets received on this VLAN on the specified port. If you do not specify a string
here or in the Rem…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.67.1.11.1.3
zyPppoeIaPortVlanRowStatus
This object allows entries to be created and deleted from the PPPoE IA port VLAN table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.67.1.11.1.4