ZYXEL-POWER-ETHERNET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
19

zyxelPoePsePortTable

table
.1.3.6.1.4.1.890.1.15.3.59.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPoePsePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-POWER-ETHERNET-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-POWER-ETHERNET-MIB::zyxelPoePsePortTable' 
The table contains power ethernet port information.
zyxelPoePsePortEntry row .1.3.6.1.4.1.890.1.15.3.59.1.2.1
An entry contains power ethernet port information.
Indexes
Column Syntax OID
zyPoePsePortMaxPower
PoE PSE port user-defined max power expressed in milliwatt,
Valid value should be between 1000 and 33000,in steps of 200.
Value 0(Default) means to disable user-defined max power.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.59.1.2.1.1
zyPoePsePowerUp
Set PoE Power Up Mode Setup 802.3af mode (0), Legacy mode (1), Pre-802.3at mode(2), 802.3at mode(3), 802.3bt mode(4), Pre-802.3bt mode(5), Force-802.3at mode(6)
Enumerationr/w
Enumerated Values:
0ieee802dot3af
1legacy
2preIeee802dot3at
3ieee802dot3at
4ieee802dot3bt
5preIeee802dot3bt
6forceIeee802dot3at
 .1.3.6.1.4.1.890.1.15.3.59.1.2.1.2
zyPoePsePortTimeRange
Time-Based PoE allow to schedule the PoE works time.
Type in the time-range name witch is already created.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.59.1.2.1.3
zyPoePseWideRangeDetection
Set PoE Wide range detection Enable/Disable.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.59.1.2.1.4

zyxelPoePsePortTimeRangeTable

table
.1.3.6.1.4.1.890.1.15.3.59.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPoePsePortTimeRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-POWER-ETHERNET-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-POWER-ETHERNET-MIB::zyxelPoePsePortTimeRangeTable' 
The table contains power ethernet port time-range settings.
zyxelPoePsePortTimeRangeEntry row .1.3.6.1.4.1.890.1.15.3.59.1.6.1
An entry contains power ethernet port time-range settings.
Indexes
Column Syntax OID
zyPoePsePortTimeRangeName
Time-Based PoE allow to schedule the PoE works time. Specifiy the time-range which is already created.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.59.1.6.1.1
zyPoePsePortTimeRangeRowStatus
This object allow entry to be create and deleted a poe port time-range entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.59.1.6.1.2

zyxelPoePsePortInfoTable

table
.1.3.6.1.4.1.890.1.15.3.59.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPoePsePortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-POWER-ETHERNET-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-POWER-ETHERNET-MIB::zyxelPoePsePortInfoTable' 
The table contains power ethernet port information.
zyxelPoePsePortInfoEntry row .1.3.6.1.4.1.890.1.15.3.59.2.1.1
An entry contains power ethernet port information.
Indexes
Column Syntax OID
zyPoePsePortInfoPowerConsumption
PoE PSE port power consumption expressed in milliwatt.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.59.2.1.1.1
zyPoePsePortTimeRangeState
None(0): not bind with any time range.
In(1): system time is in the time range.
Out(2): system time is out of the time range.
Enumeration
Enumerated Values:
0none
1in
2out
 .1.3.6.1.4.1.890.1.15.3.59.2.1.1.2
zyPoePsePortTimeRangeInProfile
time-range profile name which is in profile
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.59.2.1.1.3

zyxelPoeAutoPdRecoveryPortTable

table
.1.3.6.1.4.1.890.1.15.3.59.5.2 · 1 row entry · 10 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPoeAutoPdRecoveryPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-POWER-ETHERNET-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-POWER-ETHERNET-MIB::zyxelPoeAutoPdRecoveryPortTable' 
The table contains Auto PD Recovery port configuration.
zyxelPoeAutoPdRecoveryPortEntry row .1.3.6.1.4.1.890.1.15.3.59.5.2.1
The entry contains Auto PD Recovery port configuration.
Indexes
Column Syntax OID
zyPoeAutoPdRecoveryPortState
Enable or disable Auto PD Recovery on specific port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.1
zyPoeAutoPdRecoveryPortMode
Auto PD Recovery mode. Default value is LLDP(1).
Enumerationr/w
Enumerated Values:
1lldp
2ping
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.2
zyPoeAutoPdRecoveryPortIpAddressType
The address type of zyPoeAutoPdRecoveryPortIpAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.3
zyPoeAutoPdRecoveryPortIpAddress
PD IP address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.4
zyPoeAutoPdRecoveryPollingInterval
Time interval between each ping request to PD. Default value is 20 (seconds).
Integer32r/w
Constraints:
range: 10-300
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.5
zyPoeAutoPdRecoveryPortPollingCount
Number of retry times when detect fail. Default value is 3 (times).
Integer32r/w
Constraints:
range: 2-5
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.6
zyPoeAutoPdRecoveryPortAction
Action will be applied if PD without any response. Default value is reboot-alarm(1)
Enumerationr/w
Enumerated Values:
1reboot-alarm
2alarm
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.7
zyPoeAutoPdRecoveryPortResumePollingInterval
PD reboot waiting time. Default value is 600 (seconds).
Integer32r/w
Constraints:
range: 60-800
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.8
zyPoeAutoPdRecoveryPortPdRebootCount
PD reboot count. Default value is 1 (time).
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.9
zyPoeAutoPdRecoveryPortResumePowerInterval
Set delay time to resume the PoE power supply. Default value is 10 (seconds).
Integer32r/w
Constraints:
range: 5-120
 .1.3.6.1.4.1.890.1.15.3.59.5.2.1.10