ZYXEL-PORT-SECURITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
7

zyxelPortSecurityPortTable

table
.1.3.6.1.4.1.890.1.15.3.66.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPortSecurityPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-PORT-SECURITY-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-PORT-SECURITY-MIB::zyxelPortSecurityPortTable' 
The table contains port security on the specified port configuration.
zyxelPortSecurityPortEntry row .1.3.6.1.4.1.890.1.15.3.66.1.2.1
An entry contains port security on the specified port configuration.
Indexes
Column Syntax OID
zyPortSecurityPortState
Enable/Disable Port Security on the specified port. Enable(1) means this port only accept frames
from static MAC addresses that are configured for the port,and dynamic MAC address frames up to the
number specified by …
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.66.1.2.1.1
zyPortSecurityPortLearnState
Enable/Disable MAC address learning on the specified port. MAC address learning reduces outgoing
broadcast traffic. For MAC address learning to occur on a port, the port itself must be active with
address learning ena…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.66.1.2.1.2
zyPortSecurityPortMacLimit
Set this field to limit the number of (dynamic) MAC addresses that may be learned on a port. For
example, if you set this field to 5 on port 2, then only the devices with these five learned MAC
addresses may access po…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.66.1.2.1.3

zyxelPortSecurityVMLTable

table
.1.3.6.1.4.1.890.1.15.3.66.1.5 · 1 row entry · 4 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPortSecurityVMLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-PORT-SECURITY-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-PORT-SECURITY-MIB::zyxelPortSecurityVMLTable' 
The table contains VLAN MAC address limit on the specified port for the specified VLAN configuration.
zyxelPortSecurityVMLEntry row .1.3.6.1.4.1.890.1.15.3.66.1.5.1
An entry contains VLAN MAC address limit on the specified port for the specified VLAN configuration.
Indexes
Column Syntax OID
zyPortSecurityVMLPort
The configured port number of VLAN MAC Limit.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.66.1.5.1.1
zyPortSecurityVMLVID
The configured VLAN number of VLAN MAC Limit.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.66.1.5.1.2
zyPortSecurityVMLMacLimit
Set this field to limit the number of (dynamic) MAC addresses that may be learned on a port in a
specified VLAN. For example, if you set this field to 5 on port 2 in VLAN 3, then only the devices
with these five learn…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.66.1.5.1.3
zyPortSecurityVMLRowStatus
This object allows entries to be created and deleted from the portSecurityVMLTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.66.1.5.1.4