ZYXEL-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
13

zyxelPortTable

table
.1.3.6.1.4.1.890.1.15.3.61.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-PORT-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-PORT-MIB::zyxelPortTable' 
The table contains port configuration.
zyxelPortEntry row .1.3.6.1.4.1.890.1.15.3.61.1.1.1
An entry contains port configuration.
Indexes
Column Syntax OID
zyPortSpeedDuplex
Select The speed and the duplex mode of the Ethernet connection on this port. Selecting Auto
(auto-negotiation) allows one port to negotiate with a peer port automatically to obtain the
connection speed and duplex mod…
Enumerationr/w
Enumerated Values:
0auto
1speed10Half
2speed10Full
3speed100Half
4speed100Full
5speed1000Full
6speed10GFull
7speed12GFull
8speed40GFull
9speedAuto1000
10speedAuto10G
11speed2500Full
12speed5GFull
13speed10an
14speed100an
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.1
zyPortFlowControlState
Enable/Disable the flow control on this port. A concentration of traffic on a port decreases port
bandwidth and overflows buffer memory causing packet discards and frame losses. Flow control is used
to regulate transm…
Enumerationr/w
Enumerated Values:
1tx-rx
2disable
3tx
4rx
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.2
zyPortName
Enter a descriptive name that identifies this port.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.3
zyPortIntrusionLockState
Enable/Disable intrusion lock on the port(s) and the port cannot be connected again after you
disconnected the cable.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.4
zyPortCX4CableLength
Set the number of meters for the length of the 10GBASE-CX4 cable you use to connect between the swtich
and another switch for stacking.
Enumerationr/w
Enumerated Values:
0halfMeters
1oneMeters
2threeMeters
3fiveMeters
4tenMeters
5fifteenMeters
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.5
zyPort10GMediaType
Set the 10GBase media type.
Enumerationr/w
Enumerated Values:
0sfpPlus
1dac10g
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.6
zyPortExtendRangeState
Enable/Disable the extend-range mode on this port.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.61.1.1.1.7

zyxelPortInfoTable

table
.1.3.6.1.4.1.890.1.15.3.61.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-PORT-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-PORT-MIB::zyxelPortInfoTable' 
The table contains port information.
zyxelPortInfoEntry row .1.3.6.1.4.1.890.1.15.3.61.2.1.1
An entry contains port information.
Indexes
Column Syntax OID
zyPortModuleType
This entry displays the speed type of modular.
Enumeration
Enumerated Values:
0fastEthernet
1gigabitEthernet
2xgEthernet10000
3x1Ethernet40000
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.1
zyPortLinkUpType
The entry shows the linkUp cable type (copper, fiber, xfp or cx4) for the combo ports.
Enumeration
Enumerated Values:
0down
1copper
2fiber
3xfp
4cx4
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.2
zyPortTestStatus
This entry displays latest loopback test status of port while performing loopback test.
Enumeration
Enumerated Values:
0none
1underTesting
2success
3fail
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.3
zyPortCounterReset
Enable this entry can reset port counter record.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.4
zyPortUtilizationRx
This entry display the percentage of port utilization per second received on this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.5
zyPortUtilizationTx
This entry display the percentage of port utilization per second transmitted on this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.61.2.1.1.6