ZYXEL-MVR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
13

zyxelMvrTable

table
.1.3.6.1.4.1.890.1.15.3.55.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelMvrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MVR-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MVR-MIB::zyxelMvrTable' 
The table contains multicast VLAN registration (MVR) configuration.
zyxelMvrEntry row .1.3.6.1.4.1.890.1.15.3.55.1.2.1
An entry contains multicast VLAN registration (MVR) configuration.
Indexes
Column Syntax OID
zyMvrVid
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.55.1.2.1.1
zyMvrName
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.55.1.2.1.2
zyMvrMode
Specify the MVR mode on the Switch. Choices are Dynamic and Compatible.
Select Dynamic to send IGMP reports to all MVR source ports in the multicast VLAN.
Select Compatible to set the Switch not to send IGMP reports.
Enumerationr/w
Enumerated Values:
0dynamic
1compatible
 .1.3.6.1.4.1.890.1.15.3.55.1.2.1.3
zyMvr8021pPriority
Select a priority level (0-7) with which the Switch replaces the priority in outgoing IGMP
control packets (belonging to this multicast VLAN).
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.55.1.2.1.4
zyMvrRowStatus
This object allows entries to be created and deleted from the Multicast VLAN Registration (MVR)
table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.55.1.2.1.5

zyxelMvrPortTable

table
.1.3.6.1.4.1.890.1.15.3.55.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelMvrPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MVR-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MVR-MIB::zyxelMvrPortTable' 
The table contains multicast VLAN registration (MVR) port configuration.
zyxelMvrPortEntry row .1.3.6.1.4.1.890.1.15.3.55.1.3.1
An entry contains multicast VLAN registration (MVR) port configuration.
Indexes
Column Syntax OID
zyMvrPortRole
Specify the roles on the port.
None(1), Set the port not to participate in MVR. No MVR multicast traffic is sent or received on this port.
Source Port(2), Set the port as the MVR source port that sends and receives m…
Enumerationr/w
Enumerated Values:
1none
2sourcePort
3receiverPort
 .1.3.6.1.4.1.890.1.15.3.55.1.3.1.1
zyMvrPortTagging
Enable/Disable this port to tag the VLAN ID on all the outgoing frames.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.55.1.3.1.2

zyxelMvrGroupTable

table
.1.3.6.1.4.1.890.1.15.3.55.1.5 · 1 row entry · 6 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelMvrGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MVR-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MVR-MIB::zyxelMvrGroupTable' 
The table contains multicast VLAN registration (MVR) group configuration.
zyxelMvrGroupEntry row .1.3.6.1.4.1.890.1.15.3.55.1.5.1
An entry contains multicast VLAN registration (MVR) group configuration.
Indexes
Column Syntax OID
zyMvrGroupName
Enter a descriptive name for identification purposes.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.890.1.15.3.55.1.5.1.1
zyMvrGroupStartIpAddressType
The address type of zyxelMvrGroupStartIpAddress.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.15.3.55.1.5.1.2
zyMvrGroupStartIpAddress
Enter the starting IP multicast address of the multicast group.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.55.1.5.1.3
zyMvrGroupEndIpAddressType
The address type of zyxelMvrGroupEndIpAddress.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.890.1.15.3.55.1.5.1.4
zyMvrGroupEndIpAddress
Enter the ending IP multicast address of the multicast group.
Enter the same IP address as the Start Address entry if you want to configure only one IP address for a multicast group.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.890.1.15.3.55.1.5.1.5
zyMvrGroupRowStatus
This object allows entries to be created and deleted from the Multicast VLAN Registration (MVR) group table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.55.1.5.1.6