ZYXEL-MES2110-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
12

trapManagerTable

table mandatory
.1.3.6.1.4.1.890.1.5.8.2110.2.13 · 1 row entry · 4 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk trapManagerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES2110-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES2110-MIB::trapManagerTable' 
This object contains the entries of Network Management Systems 
to which traps will be sent.
trapManagerTableEntry row .1.3.6.1.4.1.890.1.5.8.2110.2.13.1
This object specifies an entry in the trap manager table.
Indexes
Column Syntax OID
trapManagerIndexmandatory
 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.5.8.2110.2.13.1.1
trapManagerIpAddressmandatory
This object specifies the IP address of the destination
of a network management system to which traps will be sent.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.890.1.5.8.2110.2.13.1.2
trapManagerNamemandatory
This object identifies the name of the destination of a
network management system to which traps will be sent.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.890.1.5.8.2110.2.13.1.3
trapManagerStatusmandatory
This object specifies a trap manager entry status in the trap
manager table. (1) -- Enabled or (2) -- Disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.5.8.2110.2.13.1.4

mes2110_PortTable

table mandatory
.1.3.6.1.4.1.890.1.5.8.2110.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk mes2110_PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-MES2110-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-MES2110-MIB::mes2110_PortTable' 
This object lists port entries on the mes2110 module.
mes2110_PortEntry row .1.3.6.1.4.1.890.1.5.8.2110.3.1.1
This object specifies a port entry in the port table, mes2110_PortTable.
The port entry contains the information about a single port.
Indexes
Column Syntax OID
portIndexmandatory
This object is the port index, which uniquely identifies
a port. It ranges from 1 to the total port number.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.1
portNamemandatory
This object specifies the user defined descriptive name
for the port.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.2
portAdminStatusmandatory
This object specifies the port admin state. Setting this object
to disable(1) disables the port. Setting this object to enable(4)
enables the port.
Enumerationr/w
Enumerated Values:
1disable
4enable
 .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.3
portLinkStatusmandatory
This object indicates the link status attached to the port.
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.4
portSpeedModemandatory
This object specifies the speed of the port, 10M(1) or 100M(2) or 100M(3).
Enumerationr/w
Enumerated Values:
1speed-10M
2speed-100M
3speed-1000M
 .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.5
portDuplexModemandatory
This object specifies the duplex mode of the port, half duplex(1)
or full duplex(2).
Enumerationr/w
Enumerated Values:
1half
2full
 .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.6
portAutomandatory
This object specifies the auto negotiation status of the port.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.7
portFfcmandatory
This object specifies the force flow control status of a port.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.890.1.5.8.2110.3.1.1.8