ZYXEL-ERR-DISABLE-MIB

        The subtree for errdisable
    
Source file
ZYXEL-ERR-DISABLE-MIB
Last revised
Identity
zyxelErrdisable
Base OID
1.3.6.1.4.1.890.1.15.3.24
Imported Objects
P-BRIDGE-MIB EnabledStatus
SNMPv2-SMI MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
ZYXEL-ES-SMI esMgmt
Net-SNMP examples using the zyxel MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZYXEL-ERR-DISABLE-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZYXEL-ERR-DISABLE-MIB::zyxelErrdisable'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-ERR-DISABLE-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-ERR-DISABLE-MIB::zyxelErrdisable'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (26)
.1.3.6.1.4.1.890.1.15.3.24
.1.3.6.1.4.1.890.1.15.3.24.1
.1.3.6.1.4.1.890.1.15.3.24.1.1
.1.3.6.1.4.1.890.1.15.3.24.1.1.1
.1.3.6.1.4.1.890.1.15.3.24.1.1.2
.1.3.6.1.4.1.890.1.15.3.24.1.1.2.1
Enumeration
.1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.1
.1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.2
Integer32
.1.3.6.1.4.1.890.1.15.3.24.1.1.2.1.3
.1.3.6.1.4.1.890.1.15.3.24.1.2
.1.3.6.1.4.1.890.1.15.3.24.1.2.1
.1.3.6.1.4.1.890.1.15.3.24.1.2.1.1
Enumeration
.1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.1
.1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.2
Enumeration
.1.3.6.1.4.1.890.1.15.3.24.1.2.1.1.3
.1.3.6.1.4.1.890.1.15.3.24.2
.1.3.6.1.4.1.890.1.15.3.24.2.1
.1.3.6.1.4.1.890.1.15.3.24.2.1.1
Enumeration
.1.3.6.1.4.1.890.1.15.3.24.2.1.1.1
.1.3.6.1.4.1.890.1.15.3.24.2.1.1.2
Integer32
.1.3.6.1.4.1.890.1.15.3.24.2.1.1.3
.1.3.6.1.4.1.890.1.15.3.24.3
.1.3.6.1.4.1.890.1.15.3.24.3.1
Enumeration
.1.3.6.1.4.1.890.1.15.3.24.3.2
Enumeration
.1.3.6.1.4.1.890.1.15.3.24.3.3
.1.3.6.1.4.1.890.1.15.3.24.4
Dependencies (9) 3 direct · 6 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.890.1.15.3.24.4.1
The trap is sent when an error is detected on a port, such as a loop occurs or the rate limit for
specific control packets is exceeded.
.1.3.6.1.4.1.890.1.15.3.24.4.2
This trap is sent when the switch ceases the action taken on a port, such as shutting down
the port or discarding packets on the port, after the specified recovery interval.