ZYXEL-AclV2-MIB Table View

The table contains classifier general configuration and information.

zyxelAclV2ClassifierEntry row .1.3.6.1.4.1.890.1.15.3.105.1.1.1

An entry contains classifier general configuration and information.

Indexes

zyAclV2ClassifierName

Column	Syntax	OID
zyAclV2ClassifierName The name of classifier rule is used for identifying purposes.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.15.3.105.1.1.1.1
zyAclV2ClassifierState Enable/Disable classifier rule on this switch.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.15.3.105.1.1.1.2
zyAclV2ClassifierWeight Weght value for classifier rule, 0~65535. Default 32767. When the match order is manual, the higher weight the higher priorit When the match order is auto, the priority depends on the depth of qualifier.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.1.1.3
zyAclV2ClassifierCountState Enable/disable count on this classifier rule. To Enable counting the matched packet number of this rule.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.15.3.105.1.1.1.4
zyAclV2ClassifierLogState Enable/disable log on this classifier rule. To Enable recording the matched packet number of this rule in a configurable time interval.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.15.3.105.1.1.1.5
zyAclV2ClassifierTimeRange Time Range Name for classifier rule. Bind a time range profile with this rule to active this rule in specific time.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.15.3.105.1.1.1.6
zyAclV2ClassifierMatchCount Match-Count of this classifier rule. It will show the matched packet count of this rule if zyAclV2ClassifierCount is enabled.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.890.1.15.3.105.1.1.1.7

The table contains classifier ethernet configuration.

zyxelAclV2ClassifierEthernetEntry row .1.3.6.1.4.1.890.1.15.3.105.1.2.1

An entry contains classifier ethernet configuration.

Indexes

zyAclV2ClassifierName

Column	Syntax	OID
zyAclV2ClassifierEthernetSourcePorts Source Port List for classifier rule.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.1
zyAclV2ClassifierEthernetSourceTrunks Source Trunk List for classifier rule.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.2
zyAclV2ClassifierEthernetPacketFormat Packet format for classifier rule. A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3 standards. A value of Ethernet II indicates that the packets are formatted according to RFC 894,…	Enumeration Enumerated Values: 1 all 2 ethernetIIUntagged 3 ethernetIITagged 4 ethernet802dot3Untagged 5 ethernet802dot3Tagged	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.3
zyAclV2ClassifierEthernet8021pPriority 802.1p priority for classifier rule. 0~7. The range is 0~7 and value -1 means any priority level.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.4
zyAclV2ClassifierEthernetInner8021pPriority Inner 802.1p priority for classifier rule, 0~7. Value -1 means any priority level.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.5
zyAclV2ClassifierEthernetType Ethernet type for classifier rule. It is represented in decimal expression and value 65535 means any Ethernet type.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.6
zyAclV2ClassifierEthernetSourceMacAddress Source MAC address for classifier rule. 00:00:00:00:00:00 means any source MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.7
zyAclV2ClassifierEthernetSourceMACMask Source MAC Mask for classifier rule.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.8
zyAclV2ClassifierEthernetDestinationMacAddress Destination MAC address for classifier rule. 00:00:00:00:00:00 means any destination MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.9
zyAclV2ClassifierEthernetDestinationMACMask Destination MAC Mask for classifier rule.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.890.1.15.3.105.1.2.1.10

An entry contains classifier VLAN configuration.

zyxelAclV2ClassifierVlanEntry row .1.3.6.1.4.1.890.1.15.3.105.1.3.1

An entry contains classifier VLAN configuration.

Indexes

zyAclV2ClassifierName

Column	Syntax	OID
zyAclV2ClassifierVlanMap1k VLAN ID List for classifer rule. range : 1~4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.890.1.15.3.105.1.3.1.1
zyAclV2ClassifierVlanMap2k VLAN ID List for classifer rule. range : 1~4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.890.1.15.3.105.1.3.1.2
zyAclV2ClassifierVlanMap3k VLAN ID List for classifer rule. range : 1~4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.890.1.15.3.105.1.3.1.3
zyAclV2ClassifierVlanMap4k VLAN ID List for classifer rule. range : 1~4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.890.1.15.3.105.1.3.1.4

An entry contains classifier inner VLAN configuration.

zyxelAclV2ClassifierInnerVlanEntry row .1.3.6.1.4.1.890.1.15.3.105.1.4.1

An entry contains classifier inner VLAN configuration.

Indexes

zyAclV2ClassifierName

Column	Syntax	OID
zyAclV2ClassifierInnerVlanMap1k inner VLAN ID List for classifer rule. range : 1~4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.890.1.15.3.105.1.4.1.1
zyAclV2ClassifierInnerVlanMap2k inner VLAN ID List for classifer rule. range : 1~4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.890.1.15.3.105.1.4.1.2
zyAclV2ClassifierInnerVlanMap3k inner VLAN ID List for classifer rule. range : 1~4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.890.1.15.3.105.1.4.1.3
zyAclV2ClassifierInnerVlanMap4k inner VLAN ID List for classifer rule. range : 1~4094.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.890.1.15.3.105.1.4.1.4

The table contains classifier IP configuration.

zyxelAclV2ClassifierIpEntry row .1.3.6.1.4.1.890.1.15.3.105.1.5.1

An entry contains classifier IP configuration.

Indexes

zyAclV2ClassifierName

Column	Syntax	OID
zyAclV2ClassifierIpPacketLenRangeStart The Start value of IP packet length range, 0~65535. And it must smaller then the zyAclV2ClassifierIpPacketLenRangeEnd. Value -1 means any start value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.1
zyAclV2ClassifierIpPacketLenRangeEnd The End value of IP packet length range, 0~65535. And it must larger then the zyAclV2ClassifierIpPacketLenRangeStart. Value -1 means any start value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.2
zyAclV2ClassifierIpDSCP DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.3
zyAclV2ClassifierIpPrecedence Precedence for calssifier rule, 0~7. Value -1 means any Precedence.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.4
zyAclV2ClassifierIpToS ToS for calssifier rule, 0~127. Value -1 means any ToS.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.5
zyAclV2ClassifierIpProtocol IP Protocol for classifier rule. Value 255 means any IP protocol.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.6
zyAclV2ClassifierIpEstablishOnly Establish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.7
zyAclV2ClassifierIpSourceIpAddress Source IP address for classifier rule. 0.0.0.0 means any source IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.8
zyAclV2ClassifierIpSourceIpMaskBits Source IP mask bits for classifier rule.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.9
zyAclV2ClassifierIpDestinationIpAddress Destination IP address for classifier rule. 0.0.0.0 means any destination IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.10
zyAclV2ClassifierIpDestinationIpMaskBits Destination IP mask bits for classifier rule.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.11
zyAclV2ClassifierIpSourceSocketRangeStart Source Socket Number range start for classifier rule, 0~65535. If not qualifying a range of socket numbers, the zyAclV2ClassifierSourceSocketRangeEnd is no need to configure.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.12
zyAclV2ClassifierIpSourceSocketRangeEnd Destination Socket Number range end for classifier rule. This object is not necessary.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.13
zyAclV2ClassifierIpDestinationSocketRangeStart Source Socket Number range start for classifier rule, 0~65535. If not qualifying a range of socket numbers, the zyAclV2ClassifierDestinationSocketRangeEnd is no need to configure.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.14
zyAclV2ClassifierIpDestinationSocketRangeEnd Destination Socket Number range end for classifier rule. This object is not necessary.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.5.1.15

The table contains classifier IPv6 configuration.

zyxelAclV2ClassifierIpv6Entry row .1.3.6.1.4.1.890.1.15.3.105.1.6.1

An entry contains classifier IPv6 configuration.

Indexes

zyAclV2ClassifierName

Column	Syntax	OID
zyAclV2ClassifierIPv6DSCP DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.6.1.1
zyAclV2ClassifierIPv6NextHeader IPv6 next header protocol type for classifier rule. Value 255 means any protocol type.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.6.1.2
zyAclV2ClassifierIPv6EstablishOnly Establish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.15.3.105.1.6.1.3
zyAclV2ClassifierIPv6SourceIpAddress IPv6 source address for classifier rule. :: means any IPv6 source ip address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.15.3.105.1.6.1.4
zyAclV2ClassifierIPv6SourceIpPrefixLength IPv6 source address prefix length for classifier rule.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.6.1.5
zyAclV2ClassifierIPv6DestinationIpAddress IPv6 destination address for classifier rule. :: means any IPv6 destination ip address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.15.3.105.1.6.1.6
zyAclV2ClassifierIPv6DestinationIpPrefixLength IPv6 destination address prefix length for classifier rule.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.1.6.1.7

The table contains policy configuration.

zyxelAclV2PolicyEntry row .1.3.6.1.4.1.890.1.15.3.105.2.1.1

An entry contains policy configuration.

Indexes

zyAclV2PolicyName

Column	Syntax	OID
zyAclV2PolicyName The name of policy rule is used for identifying purposes.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.1
zyAclV2PolicyState Enable/Disable policy rule on this switch.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.2
zyAclV2PolicyClassifier The classifier(s) applies in this policy rule.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.3
zyAclV2PolicyVid VLAN ID for policy rule.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.4
zyAclV2PolicyEgressPort The outgoing port number in this policy rule.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.5
zyAclV2Policy8021pPriority Specify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.6
zyAclV2PolicyDSCP Specify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.7
zyAclV2PolicyTOS Specify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.8
zyAclV2PolicyBandwidth Specify the bandwidth for policy rule in kilobit per second (Kbps).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.9
zyAclV2PolicyOutOfProfileDSCP Specify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.10
zyAclV2PolicyForwardingAction There are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets. 'Do not drop the matching frame previously marked for dropping' is retain the frames th…	Enumeration Enumerated Values: 1 noChange 2 discardThePacket 3 doNotDropTheMatchingFramePreviouslyMarkedForDropping	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.11
zyAclV2PolicyPriorityAction There are four priority actions for policy rule. 'No change' is keep the priority setting of the frames. 'Set the packet's 802.1 priority' is replace the packet's 802.1 priority field with the value you set in the Prior…	Enumeration Enumerated Values: 1 noChange 2 setThePackets802dot1Priority 3 sendThePacketToPriorityQueue 4 replaceThe802dot1PriorityFieldWithTheIpTosValue 5 replaceThe802dot1PriorityByInner802dot1Priority	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.12
zyAclV2PolicyDiffServAction There are four DiffServ actions for policy rule. 'No change' is keeping the TOS and/or DSCP fields in the packets. 'Set the packet's TOS field' is set the TOS field with the value you configure in the TOS field. 'Rep…	Enumeration Enumerated Values: 1 noChange 2 setThePacketsTosField 3 replaceTheIpTosFieldWithThe802dot1PriorityValue 4 setTheDiffservCodepointFieldInTheFrame	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.13
zyAclV2PolicyOutgoingAction There are four outgoing actions for policy rule. 'Send the packet to the mirror port' is sent the packet to the mirror port. 'Send the packet to the egress port' is sent the packet to the egress port. 'Send the match…	Bits Enumerated Values: 0 sendThePacketToTheMirrorPort 1 sendThePacketToTheEgressPort 2 sendTheMatchingFramesToTheEgressPort 3 setThePacketVlanId	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.14
zyAclV2PolicyMeteringState Enable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.15
zyAclV2PolicyOutOfProfileAction There are four out of profile actions for policy rule. 'Drop the packet' is discard the out-of-profile traffic. 'Change the DSCP value' is replace the DSCP field with the value specified in the Out of profile DSCP fie…	Bits Enumerated Values: 0 dropThePacket 1 changeTheDscpValue 2 setOutDropPrecedence 3 doNotDropTheMatchingFramePreviouslyMarkedForDropping	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.16
zyAclV2PolicyRowstatus This object shows the entry of policy rule status.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.17
zyAclV2PolicyQueueAction There are two queue actions for policy rule. 'No change' is keep the priority setting of the frames. 'Send the packet to priority queue' is put the packets in the designated queue.	Enumeration Enumerated Values: 1 noChange 2 sendThePacketToPriorityQueue	.1.3.6.1.4.1.890.1.15.3.105.2.1.1.18