ZXROSNG-TPOAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

146

zxTPOAMSectionConfigTable

table

.1.3.6.1.4.1.3902.3.6000.202.6 · 1 row entry · 4 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMSectionConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMSectionConfigTable'

The configuration table in the instance of SECTION.

zxTPOAMSectionConfigEntry row .1.3.6.1.4.1.3902.3.6000.202.6.1

An entry containing management information applicable to a
particular instance of SECTION

Indexes

zxTPOAMSectionConfigSectionID

Column Syntax OID

zxTPOAMSectionConfigSectionID

SECTION ID used to identify the SECTION entity.

Unsigned32

Constraints:
range: 1-4000

.1.3.6.1.4.1.3902.3.6000.202.6.1.1

zxTPOAMSectionConfigLocalPort

Local port bind the SECTION,and the port support GEI/FEI/VLAN
subinterface/the third layer's vlan port/sg aggregation port/sg
subinterface. The limits of configuration:1)the port must locate
in the third lay 2)one po…

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.6000.202.6.1.2

zxTPOAMSectionConfigPeerIp

Peer ip address bind the SECTION.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.3.6000.202.6.1.3

zxTPOAMSectionConfigSdEnable

SECTION layer sd enable flag:1 disable,2 enable,default value is
disable.

Enumeration

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.3902.3.6000.202.6.1.4

zxTPOAMTunnelEntityStaConfigTable

table

.1.3.6.1.4.1.3902.3.6000.202.7 · 1 row entry · 4 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMTunnelEntityStaConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMTunnelEntityStaConfigTable'

The configuration table in the instance of TUNNEL.

zxTPOAMTunnelEntityStaConfigEntry row .1.3.6.1.4.1.3902.3.6000.202.7.1

An entry containing management information applicable to a
particular instance of TUNNEL.

Indexes

zxTPOAMTunnelEntityStaCTunnelID zxTPOAMTunnelEntityStaCLspid

Column Syntax OID

zxTPOAMTunnelEntityStaCTunnelID

The TUNNEL ID only applies to the bidirectional static TUNNEL.
The range of this parameter depend on the device.

Unsigned32

Constraints:
range: 1-131072

.1.3.6.1.4.1.3902.3.6000.202.7.1.1

zxTPOAMTunnelEntityStaCLspid

The identity of the static LSP

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.7.1.2

zxTPOAMTunnelEntityStaCMegIndex

MEG index corresponding to this entity.0 is invalid and it means
that have not created MEG.

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.3.6000.202.7.1.3

zxTPOAMTunnelEntityStaCPropagate

The propagating switch of the entity

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.7.1.4

zxTPOAMTunnelEntityDynConfigTable

table

.1.3.6.1.4.1.3902.3.6000.202.8 · 1 row entry · 3 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMTunnelEntityDynConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMTunnelEntityDynConfigTable'

The configuration table in the instance of dynamic TUNNEL.

zxTPOAMTunnelEntityDynConfigEntry row .1.3.6.1.4.1.3902.3.6000.202.8.1

An entry containing management information applicable to a
particular instance of dynamic TUNNEL.

Indexes

zxTPOAMTunnelEntityDynCTunnelID zxTPOAMTunnelEntityDynCLspRole

Column Syntax OID

zxTPOAMTunnelEntityDynCTunnelID

TUNNEL ID.
The range of this parameter depend on the device.

Unsigned32

Constraints:
range: 1-131072

.1.3.6.1.4.1.3902.3.6000.202.8.1.1

zxTPOAMTunnelEntityDynCLspRole

The identity of dynamic LSP which including two roles: master
and backup

Enumeration

Enumerated Values:

1	master
2	slave

.1.3.6.1.4.1.3902.3.6000.202.8.1.2

zxTPOAMTunnelEntityDynCMegIndex

MEG index corresponding to this entity.0 is invalid and it means
that have not created MEG.

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.3.6000.202.8.1.3

zxTPOAMPWEntityConfigTable

table

.1.3.6.1.4.1.3902.3.6000.202.9 · 1 row entry · 2 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMPWEntityConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMPWEntityConfigTable'

The configuration table in the instance of PW.

zxTPOAMPWEntityConfigEntry row .1.3.6.1.4.1.3902.3.6000.202.9.1

An entry containing management information applicable to a
particular instance of PW.

Indexes

zxTPOAMPWEntityPWName

Column	Syntax	OID
zxTPOAMPWEntityPWName The PW name	SNMPv2-TCDisplayString Constraints: `range: 0-255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3902.3.6000.202.9.1.1`
zxTPOAMPWEntityMegIndex MEG index corresponding to this entity.0 is invalid and it means that have not created MEG.	Unsigned32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.3902.3.6000.202.9.1.2`

zxTPOAMSectionEntityConfigTable

table

.1.3.6.1.4.1.3902.3.6000.202.10 · 1 row entry · 3 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMSectionEntityConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMSectionEntityConfigTable'

The configuration table in the instance of SECTION.

zxTPOAMSectionEntityConfigEntry row .1.3.6.1.4.1.3902.3.6000.202.10.1

An entry containing management information applicable to a
particular instance of SECTION.

Indexes

zxTPOAMSectionEntitySectionID

Column Syntax OID

zxTPOAMSectionEntitySectionID

SECTION ID

Unsigned32

Constraints:
range: 1-4000

.1.3.6.1.4.1.3902.3.6000.202.10.1.1

zxTPOAMSectionEntityMegIndex

MEG index corresponding to this entity.0 is invalid and it
means that have not created MEG.

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.3.6000.202.10.1.2

zxTPOAMSectionEntityPropagate

The propagating switch of the entity

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.10.1.3

zxTPOAMMegConfigTable

table

.1.3.6.1.4.1.3902.3.6000.202.11 · 1 row entry · 33 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMMegConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMMegConfigTable'

The configuration table of MEG.

zxTPOAMMegConfigEntry row .1.3.6.1.4.1.3902.3.6000.202.11.1

An entry containing management information applicable to a
particular MEG.

Indexes

zxTPOAMMegConfigIndex

Column Syntax OID

zxTPOAMMegConfigIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.11.1.1

zxTPOAMMegConfigMegID

MEG identity name

SNMPv2-TCDisplayString

Constraints:
range: 1-13

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.6000.202.11.1.2

zxTPOAMMegConfigOAMEnable

The OAM enable switch under MEG model.(default :disable)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.3

zxTPOAMMegConfigCCEnable

The CC enable switch (this switch only enable in the case of
peer mep and local mep with full configuration)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.4

zxTPOAMMegConfigCVEnable

The CV enable switch

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.5

zxTPOAMMegConfigCVPeriod

The sending period of CV packets

Enumeration

Enumerated Values:

1	p3dot33ms
2	p10ms
3	p100ms
4	p1s
5	p10s
6	p1min
7	p10min

.1.3.6.1.4.1.3902.3.6000.202.11.1.6

zxTPOAMMegConfigCVPhbName

The PHB value in CV sending packets.(default :cs7)

Enumeration

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.11.1.7

zxTPOAMMegConfigAISEnableobsolete

The AIS enable switch(The function of AIS is enabled
only in the instance of lsp or pw)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.8

zxTPOAMMegConfigAISPhbobsolete

The PHB value in AIS sending packets.(default :cs7)

Enumeration

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.11.1.9

zxTPOAMMegConfigCSFEnable

The switch of CSF.(The function of CSF is enabled only
in the instance of pw)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.10

zxTPOAMMegConfigCSFPhb

The PHB value in CSF sending packets.(default :cs7)

Enumeration

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.11.1.11

zxTPOAMMegConfigLocalMepType

Local MEP type :source MEP/destination MEP/bidirectional
MEP.The configuration of MEP and MIP is mutual exclusive.

Enumeration

Enumerated Values:

0	unknown
1	source
2	destination
3	bidirection

.1.3.6.1.4.1.3902.3.6000.202.11.1.12

zxTPOAMMegConfigLocalMepID

Lhe identity of local MEP.0 is invalid and it means that
have not configed MEP.

Unsigned32

Constraints:
range: 0-8191

.1.3.6.1.4.1.3902.3.6000.202.11.1.13

zxTPOAMMegConfigPeerMepType

The type of peer MEP including source MEP,destination
MEP and bidirectional MEP.

Enumeration

Enumerated Values:

0	unknown
1	source
2	destination
3	bidirection

.1.3.6.1.4.1.3902.3.6000.202.11.1.14

zxTPOAMMegConfigPeerlMepID

The identity of peer MEP.0 is invalid and it means that
have not configed peer MEP.

Unsigned32

Constraints:
range: 0-8191

.1.3.6.1.4.1.3902.3.6000.202.11.1.15

zxTPOAMMegConfigMipID

The identity of MIP.0 is invalid and it means that have
not configed MIP.

Unsigned32

Constraints:
range: 0-8191

.1.3.6.1.4.1.3902.3.6000.202.11.1.16

zxTPOAMMegConfigMipUpDown

The MIP attribute including UP and DOWN is available only
when the value of zxTPOAMMegConfigMipID is not 0

Enumeration

Enumerated Values:

0	down
1	up

.1.3.6.1.4.1.3902.3.6000.202.11.1.17

zxTPOAMMegConfigProactiveLmEnable

The switch of proactive LM.(default: disable)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.18

zxTPOAMMegConfigSdEnable

The switch of SD alarm function.(default :disable)
(even if the loss ratio runs over the threshold,
there is no SD alarm without this configuration)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.19

zxTPOAMMegConfigLossPktThresholdMantissa

The configuration of loss ratio threshold(This field displays
the manitissa in E-notation)(default: 5)

Unsigned32

Constraints:
range: 1-9

.1.3.6.1.4.1.3902.3.6000.202.11.1.20

zxTPOAMMegConfigLossPktThresholdExponent

The configuration of loss ratio threshold(This field displays
the exponent in E-notation)(default: 5)

Unsigned32

Constraints:
range: 2-6

.1.3.6.1.4.1.3902.3.6000.202.11.1.21

zxTPOAMMegConfigLCKEnable

The switch of LCK.(default: disable)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.22

zxTPOAMMegConfigTunnelID

The node identified the TUNNEL ID if MEG binding the static
or dynamic tunnels.0 is invalid.
The range of this parameter depending on the device.

Unsigned32

Constraints:
range: 0-131072

.1.3.6.1.4.1.3902.3.6000.202.11.1.23

zxTPOAMMegConfigLspid

the node identified the static tunnel if MEG binding the
static tunnels.0 is invalid

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.3.6000.202.11.1.24

zxTPOAMMegConfigLspRole

The node identified the dynamic tunnel if MEG binding the
dynamic tunnels.The LSP acts as master or backup.0 is invalid

Enumeration

Enumerated Values:

0	none
1	master
2	slave

.1.3.6.1.4.1.3902.3.6000.202.11.1.25

zxTPOAMMegConfigPWName

The node identified the PW name if MEG binding the instance
of PW. Null is invalid

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.6000.202.11.1.26

zxTPOAMMegConfigSectionID

The node identified the SECTION ID if MEG binding
the instace of SECTION.0 is invalid

Unsigned32

Constraints:
range: 0-4000

.1.3.6.1.4.1.3902.3.6000.202.11.1.27

zxTPOAMMegConfigProactiveLmType

Proactive LM adopts protocol type:
G.8114,counting the data packets;
Y.1731,counting the data packets and OAM packets.

Enumeration

Enumerated Values:

1	g8114
2	y1731

.1.3.6.1.4.1.3902.3.6000.202.11.1.28

zxTPOAMMegConfigPaDMEnable

The switch of proactive DM.(default: disable)

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.11.1.29

zxTPOAMMegConfigPaDMType

The type of proactive DM.(default: oneway)

Enumeration

Enumerated Values:

1	oneway
2	twoway

.1.3.6.1.4.1.3902.3.6000.202.11.1.30

zxTPOAMMegConfigPaDMPhb

the PHB value in DM sending packets.(default: cs7)

Enumeration

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.11.1.31

zxTPOAMMegConfigPaDMSendInterval

Sending intervals in the function of proactive DM.
(sending interval :100ms-10s,default value:1s)

Unsigned32

Constraints:
range: 1-100

.1.3.6.1.4.1.3902.3.6000.202.11.1.32

zxTPOAMMegConfigPaDMTlvSize

The length of the TLV information in the function of proactive DM

Unsigned32

Constraints:
range: 0-400

.1.3.6.1.4.1.3902.3.6000.202.11.1.33

zxTPOAMLbTable

table

.1.3.6.1.4.1.3902.3.6000.202.12 · 1 row entry · 14 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMLbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMLbTable'

The configuration table of LB detecting.

zxTPOAMLbEntry row .1.3.6.1.4.1.3902.3.6000.202.12.1

An entry containing management information applicable to a
particular LB detecting.

Indexes

zxTPOAMLbMegIndex zxTPOAMLbSnmpIndex

Column Syntax OID

zxTPOAMLbMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.12.1.1

zxTPOAMLbSnmpIndex

Detecting instance index sending by network management by snmp.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.12.1.2

zxTPOAMLbEnable

The switch of LB.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.12.1.3

zxTPOAMLbMepID

Destination MEP ID in the function of LB.0 stands for the type
of MIP.
MEP ID and MIP ID can't be effective or invalid at the same time.

Unsigned32r/w

Constraints:
range: 0-8191

.1.3.6.1.4.1.3902.3.6000.202.12.1.4

zxTPOAMLbMipID

Destination MIP ID in the function of LB.

Unsigned32r/w

Constraints:
range: 0-8191

.1.3.6.1.4.1.3902.3.6000.202.12.1.5

zxTPOAMLbMepMode

The LB working model:standard model and private model of ZTE
(default: private model)

Enumerationr/w

Enumerated Values:

0	ztemode
1	standard

.1.3.6.1.4.1.3902.3.6000.202.12.1.6

zxTPOAMLbTimeOut

Timeout value of waiting responding packets(default: 5s)

Unsigned32r/w

Constraints:
range: 5-10

.1.3.6.1.4.1.3902.3.6000.202.12.1.7

zxTPOAMLbMipTTL

TTL value of the destination MIP ID in the function of LB.
The node is invalid when the zxTPOAMLbLBType is MEP type.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.3902.3.6000.202.12.1.8

zxTPOAMLbSendPeriod

Duration time in the function of LB.It ranges from 10s to 24h
without the configuration of permanence detecting.If this node
assigned 0,it means permanence detecting unless mannual stopping.
If assigned 10-86400,it me…

Unsigned32r/w

Constraints:
range: 0-86400

.1.3.6.1.4.1.3902.3.6000.202.12.1.9

zxTPOAMLbTlvSize

The length of the TLV information in the function of LB(1-400).

Unsigned32r/w

Constraints:
range: 0-400

.1.3.6.1.4.1.3902.3.6000.202.12.1.10

zxTPOAMLbPhb

the PHB value in LB sending packets.(default: cs7)

Enumerationr/w

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.12.1.11

zxTPOAMLbSendLimitFlag

The limit of sending speed in the function of LB.
default value is 10 packets per second.It means sending
at full speed when the value is 0.

Unsigned32r/w

Constraints:
range: 0-10

.1.3.6.1.4.1.3902.3.6000.202.12.1.12

zxTPOAMLbSendResultFlag

The flag is used to judge perserving results or not.default
value is nopreserve.

Enumerationr/w

Enumerated Values:

1	nopreserve
2	preserve

.1.3.6.1.4.1.3902.3.6000.202.12.1.13

zxTPOAMLbRowStatus

Row status

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.3902.3.6000.202.12.1.14

zxTPOAMLbResultTable

table

.1.3.6.1.4.1.3902.3.6000.202.13 · 1 row entry · 9 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMLbResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMLbResultTable'

The result table of LB detecting.

zxTPOAMLbResultEntry row .1.3.6.1.4.1.3902.3.6000.202.13.1

An entry containing result information applicable to LB detecting

Indexes

zxTPOAMLbResultMegIndex zxTPOAMLbResultSnmpIndex

Column Syntax OID

zxTPOAMLbResultMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.13.1.1

zxTPOAMLbResultSnmpIndex

Detecting instance index sending by network management by snmp

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.13.1.2

zxTPOAMLbResultLocalMep

Local MEP ID

Unsigned32

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.13.1.3

zxTPOAMLbResultDestMep

Destination MEP ID in the function of LB.0 stands for
the type of MEP.MEP ID and MIP ID can't be effective or invalid
at the same time.

Unsigned32

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.13.1.4

zxTPOAMLbResultDestMip

Destination MIP ID in the function of LB.0 stands for the type
of MIP.
MEP ID and MIP ID can't be effective or invalid at the same time

Unsigned32

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.13.1.5

zxTPOAMLbResultSendCount

The count of sending LB packets

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.13.1.6

zxTPOAMLbResultRecvCount

The count of receiving LB packets

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.13.1.7

zxTPOAMLbResultDiscardCount

The count of discarding LB packets

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.13.1.8

zxTPOAMLbResultStatus

The status of testing instance:not started,testing,finished

Enumeration

Enumerated Values:

0	notready
1	running
2	finished

.1.3.6.1.4.1.3902.3.6000.202.13.1.9

zxTPOAMLtTable

table

.1.3.6.1.4.1.3902.3.6000.202.14 · 1 row entry · 11 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMLtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMLtTable'

The configuration table of LT detecting.

zxTPOAMLtEntry row .1.3.6.1.4.1.3902.3.6000.202.14.1

An entry containing management information applicable to a
particular LT detecting.

Indexes

zxTPOAMLtMegIndex zxTPOAMLtSnmpIndex

Column Syntax OID

zxTPOAMLtMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.14.1.1

zxTPOAMLtSnmpIndex

Detecting instance index sending by network management by snmp

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.14.1.2

zxTPOAMLtMepID

Destination MEP ID in the function of LT.

Unsigned32r/w

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.14.1.3

zxTPOAMLtEnable

The switch of LT.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.14.1.4

zxTPOAMLtTimeOut

Timeout value of waiting responding packets.(default: 5s)

Unsigned32r/w

Constraints:
range: 5-10

.1.3.6.1.4.1.3902.3.6000.202.14.1.5

zxTPOAMLtTTL

Maximum of the TTL in the function of LT.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.3902.3.6000.202.14.1.6

zxTPOAMLtPhb

The PHB value in LT sending packets.(default: cs7)

Enumerationr/w

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.14.1.7

zxTPOAMLtTlvSize

The length of the TLV information in the function of LT.

Unsigned32r/w

Constraints:
range: 0-400

.1.3.6.1.4.1.3902.3.6000.202.14.1.8

zxTPOAMLtMode

The LT working model:standard model and private model of ZTE.
(default: private model)

Enumerationr/w

Enumerated Values:

0	ztemode
1	standard

.1.3.6.1.4.1.3902.3.6000.202.14.1.9

zxTPOAMLtSendResultFlag

The flag used to judge perserving results or not.
default value is nopreserve.

Enumerationr/w

Enumerated Values:

1	nopreserve
2	preserve

.1.3.6.1.4.1.3902.3.6000.202.14.1.10

zxTPOAMLtRowStatus

Row status

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.6000.202.14.1.11

zxTPOAMLtResultTable

table

.1.3.6.1.4.1.3902.3.6000.202.15 · 1 row entry · 6 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMLtResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMLtResultTable'

The result table of LT detecting.

zxTPOAMLtResultEntry row .1.3.6.1.4.1.3902.3.6000.202.15.1

An entry containing result information applicable to a
particular LT detecting.

Indexes

zxTPOAMLtResultMegIndex zxTPOAMLtResultSnmpIndex

Column Syntax OID

zxTPOAMLtResultMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.15.1.1

zxTPOAMLtResultSnmpIndex

Detecting instance index sending by network management by snmp

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.15.1.2

zxTPOAMLtResultLocalMep

Local MEP ID

Unsigned32

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.15.1.3

zxTPOAMLtResultProcessStatus

The process of LT testing:fail or success.

Enumeration

Enumerated Values:

0	fail
1	sucess

.1.3.6.1.4.1.3902.3.6000.202.15.1.4

zxTPOAMLtResultHopCount

Success hops of LT testing

Unsigned32

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.3.6000.202.15.1.5

zxTPOAMLtResultStatus

The status of testing instance :not started,testing,finished

Enumeration

Enumerated Values:

0	notready
1	running
2	finished

.1.3.6.1.4.1.3902.3.6000.202.15.1.6

zxTPOAMLtResultHopTable

table

.1.3.6.1.4.1.3902.3.6000.202.16 · 1 row entry · 5 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMLtResultHopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMLtResultHopTable'

The hop table of LT detecting.

zxTPOAMLtResultHopEntry row .1.3.6.1.4.1.3902.3.6000.202.16.1

An entry containing hop result information applicable to a
particular LT detecting.

Indexes

zxTPOAMLtResultHopMegIndex zxTPOAMLtResultHopSnmpIndex zxTPOAMLtResultHopIndex

Column Syntax OID

zxTPOAMLtResultHopMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.16.1.1

zxTPOAMLtResultHopSnmpIndex

Detecting instance index sending by network management by snmp

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.16.1.2

zxTPOAMLtResultHopIndex

Hop index

Unsigned32

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.3.6000.202.16.1.3

zxTPOAMLtResultHopType

Hop type:MEP or MIP

Enumeration

Enumerated Values:

1	mep
2	mip

.1.3.6.1.4.1.3902.3.6000.202.16.1.4

zxTPOAMLtResultHopID

The ID of MEP or MIP(it's invalid if the function adopt
the private model of ZTE)

Unsigned32

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.16.1.5

zxTPOAMTestTable

table

.1.3.6.1.4.1.3902.3.6000.202.17 · 1 row entry · 10 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMTestTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMTestTable'

The configuration table of TEST detecting.

zxTPOAMTestEntry row .1.3.6.1.4.1.3902.3.6000.202.17.1

An entry containing management information applicable to a
particular TEST detecting.

Indexes

zxTPOAMTestMegIndex

Column Syntax OID

zxTPOAMTestMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.17.1.1

zxTPOAMTestEnable

The switch of TEST.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.17.1.2

zxTPOAMTestType

The type of the TEST function :source /destination /bidirectional.
Now only supporting the one-way model.

Enumerationr/w

Enumerated Values:

1	onewaysource
2	onewaydest
3	twoway

.1.3.6.1.4.1.3902.3.6000.202.17.1.3

zxTPOAMTestOneWayMepID

The MEP ID of destination MEP in the function of Unidirectional TEST.

Unsigned32r/w

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.17.1.4

zxTPOAMTestSendPeriod

Duration time in the function of TEST.It ranges from 10s to 24h
without the configuration of permanence detecting.If this node
assigned 0,it means permanence detecting unless mannual stopping.
If assigned 10-86400,it …

Unsigned32r/w

Constraints:
range: 0-86400

.1.3.6.1.4.1.3902.3.6000.202.17.1.5

zxTPOAMTestTlvSize

The length of the TLV information in the function of TEST.

Unsigned32r/w

Constraints:
range: 0-1400

.1.3.6.1.4.1.3902.3.6000.202.17.1.6

zxTPOAMTestPhb

The PHB value in TEST sending packets.(default: cs7)

Enumerationr/w

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.17.1.7

zxTPOAMTestSpeed

Sending ratio: default value 10000kbps

Unsigned32r/w

Constraints:
range: 1-10000

.1.3.6.1.4.1.3902.3.6000.202.17.1.8

zxTPOAMTestCodeType

The TLV value: all 0, all 1 (default:all 0)

Enumerationr/w

Enumerated Values:

0	zero
1	one

.1.3.6.1.4.1.3902.3.6000.202.17.1.9

zxTPOAMTestRowStatus

Row status

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.6000.202.17.1.10

zxTPOAMTestResultTable

table

.1.3.6.1.4.1.3902.3.6000.202.18 · 1 row entry · 6 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMTestResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMTestResultTable'

The result table of TEST detecting.

zxTPOAMTestResultEntry row .1.3.6.1.4.1.3902.3.6000.202.18.1

An entry containing result information applicable to a
particular TEST detecting.

Indexes

zxTPOAMTestResultMegIndex

Column Syntax OID

zxTPOAMTestResultMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.18.1.1

zxTPOAMTestResultLocalMep

Local MEP ID

Unsigned32

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.18.1.2

zxTPOAMTestResultRecvCount

The count of sending TEST packets.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.18.1.3

zxTPOAMTestResultBandWidth

The bandwidth in the function of TEST.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.18.1.4

zxTPOAMTestResultDiscardCount

Discarding count in the function of TEST.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.18.1.5

zxTPOAMTestResultStatus

The status of testing instance :not started,testing,finished

Enumeration

Enumerated Values:

0	notready
1	running
2	finished

.1.3.6.1.4.1.3902.3.6000.202.18.1.6

zxTPOAMLmOnDemandTable

table

.1.3.6.1.4.1.3902.3.6000.202.19 · 1 row entry · 7 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMLmOnDemandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMLmOnDemandTable'

The testing table of on-demand LM detecting.

zxTPOAMLmOnDemandEntry row .1.3.6.1.4.1.3902.3.6000.202.19.1

An entry containing management information applicable to a
particular on-demand LM detecting.

Indexes

zxTPOAMLMOnDemandMegIndex

Column Syntax OID

zxTPOAMLMOnDemandMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.19.1.1

zxTPOAMLMOnDemandEnable

The switch of on-demand LM.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.19.1.2

zxTPOAMLMOnDemandSendPeriod

Duration time in the function of LM.It ranges from 10s to 24h
without the configuration of permanence detecting.If this node
assigned 0,it means permanence detecting unless mannual stopping.
If assigned 10-86400,it me…

Unsigned32r/w

Constraints:
range: 0-86400

.1.3.6.1.4.1.3902.3.6000.202.19.1.3

zxTPOAMLMOnDemandLmPhb

The PHB value in LM sending packets.

Enumerationr/w

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.19.1.4

zxTPOAMLMOnDemandSendInterval

Sending intervals in the function of on-demand LM.
(sending interval :100ms-10s,default value:1s)

Unsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.3902.3.6000.202.19.1.5

zxTPOAMLMOnDemandRowStatus

Row status

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.6000.202.19.1.6

zxTPOAMLMOnDemandType

On-demand LM adopts protocol type:
G.8114,counting the data packets;
Y.1731,counting the data packets and OAM packets.

Enumerationr/w

Enumerated Values:

1	g8114
2	y1731

.1.3.6.1.4.1.3902.3.6000.202.19.1.7

zxTPOAMLmOnDemandResultTable

table

.1.3.6.1.4.1.3902.3.6000.202.20 · 1 row entry · 11 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMLmOnDemandResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMLmOnDemandResultTable'

The result table of on-demand LM detecting.

zxTPOAMLmOnDemandResultEntry row .1.3.6.1.4.1.3902.3.6000.202.20.1

An entry containing result information applicable to a
particular on-demand LM detecting.

Indexes

zxTPOAMLmODResultLocalMegIndex

Column Syntax OID

zxTPOAMLmODResultLocalMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.20.1.1

zxTPOAMLmODResultLocalMepID

Local MEP ID

Unsigned32

Constraints:
range: 1-8191

.1.3.6.1.4.1.3902.3.6000.202.20.1.2

zxTPOAMLmODResultLocalSPktCount

The number of local sending packets.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.20.1.3

zxTPOAMLmODResultLocalRPktCount

The number of local receiving packets.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.20.1.4

zxTPOAMLmODResultLocalDRPktCount

The number of local lossing packets.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.20.1.5

zxTPOAMLmODResultLocalDiscardRatio

The ratio of local lossing packets in the function of on-demand LM.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.20.1.6

zxTPOAMLmODResultRemoteSPktCount

The number of remote sending packets.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.20.1.7

zxTPOAMLmODResultRemoteRPktCount

The number of remote receiving packets.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.20.1.8

zxTPOAMLmODResultRemoteDRPktCount

The number of remote lossing packets.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.20.1.9

zxTPOAMLmODResultRemoteDiscardRatio

The ratio of remote lossing packets in the function of
on-demand LM.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.6000.202.20.1.10

zxTPOAMLmODResultStatus

The status of testing instance :not started,testing,finished

Enumeration

Enumerated Values:

0	notready
1	running
2	finished

.1.3.6.1.4.1.3902.3.6000.202.20.1.11

zxTPOAMDMTable

table

.1.3.6.1.4.1.3902.3.6000.202.21 · 1 row entry · 8 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMDMTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMDMTable'

The testing table of DM detecting.

zxTPOAMDMEntry row .1.3.6.1.4.1.3902.3.6000.202.21.1

An entry containing management information applicable to a
particular DM detecting.

Indexes

zxTPOAMDMMegIndex

Column Syntax OID

zxTPOAMDMMegIndex

MEG index

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.3.6000.202.21.1.1

zxTPOAMDMEnable

The switch of DM.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.6000.202.21.1.2

zxTPOAMDMType

The type of the DM function.

Enumerationr/w

Enumerated Values:

1	oneway
2	twoway

.1.3.6.1.4.1.3902.3.6000.202.21.1.3

zxTPOAMDMSendPhb

the PHB value in DM sending packets.

Enumerationr/w

Enumerated Values:

1	be
2	af11
3	af12
4	af21
5	af22
6	af31
7	af32
8	af41
9	af42
10	cs6
11	cs7
12	ef

.1.3.6.1.4.1.3902.3.6000.202.21.1.4

zxTPOAMDMSendPeriod

Duration time in the function of DM.It ranges from 10s to 24h
without the configuration of permanence detecting.If this node
assigned 0,it means permanence detecting unless mannual stopping.
If assigned 10-86400,it me…

Unsigned32r/w

Constraints:
range: 0-86400

.1.3.6.1.4.1.3902.3.6000.202.21.1.5

zxTPOAMDMSendInterval

Sending intervals in the function of DM.
(sending interval :100ms-10s,default value:1s)

Unsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.3902.3.6000.202.21.1.6

zxTPOAMDMRowStatus

row status

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.6000.202.21.1.7

zxTPOAMDMTlvSize

The length of the TLV information in the function of DM.

Unsigned32r/w

Constraints:
range: 0-400

.1.3.6.1.4.1.3902.3.6000.202.21.1.8

zxTPOAMDMResultTable

table

.1.3.6.1.4.1.3902.3.6000.202.22 · 1 row entry · 10 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxTPOAMDMResultTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPOAM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPOAM-MIB::zxTPOAMDMResultTable'