ZXROSNG-TPAPS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
28

zxAPSLineProtectTGConfigTable

table
.1.3.6.1.4.1.3902.3.6000.200.2 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAPSLineProtectTGConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPAPS-MIB::zxAPSLineProtectTGConfigTable' 
Configuration table of tunnel protection group's APS
zxAPSLineProtectTGConfigEntry row .1.3.6.1.4.1.3902.3.6000.200.2.1
Configuration entry of tunnel protection group's APS
Indexes
Column Syntax OID
zxAPSLineProtectTGTGID
The group id of this protection group
Unsigned32
Constraints:
range: 1-32768
 .1.3.6.1.4.1.3902.3.6000.200.2.1.1
zxAPSLineProtectTGActiveState
The active state of this protection group
restoreRun(0): Restore to run APS
pause(1): Pause APS
ApsActiveState
Type Values:
0restoreRun
1pause
Description:
APS active state
 .1.3.6.1.4.1.3902.3.6000.200.2.1.2
zxAPSLineProtectTGSendPMode
The protection mode of this protection group
send(0): To send APS packets
nosend(1): Not to send APS packets
ApsSendPMode
Type Values:
0send
1nosend
Description:
APS packet sending mode
 .1.3.6.1.4.1.3902.3.6000.200.2.1.3
zxAPSLineProtectTGHoldOffTime
The hold-off time of this protection group
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.3.6000.200.2.1.4
zxAPSLineProtectTGRevertMode
The revertive mode of this protection group
revertive(0): APS is in revertive operation, which normal traffic
signal is restored to the working transport entity after the
condition(s) causing a switch has been cleared…
ApsRevertMode
Type Values:
0revertive
1nonrevertive
Description:
APS revertive mode
 .1.3.6.1.4.1.3902.3.6000.200.2.1.5
zxAPSLineProtectTGWTRTime
The wait-to-restore time of this protection group
Unsigned32
Constraints:
range: 0-12
 .1.3.6.1.4.1.3902.3.6000.200.2.1.6
zxAPSLineProtectTGSwitchFlag
The switch command of this protection group
none(0): The switch command hasn't been configured or has been cleared
clear(1): Clear the externally initiated command and WTR
lockout(2): Prevent a working signal from being…
ApsSwitchCmd
Type Values:
0none
1clear
2lockout
3fsP
4msP
5exercise
6fsW
7msW
Description:
APS switch command
 .1.3.6.1.4.1.3902.3.6000.200.2.1.7
zxAPSLineProtectTGBridgeType
The bridge type of this protection group
selector(2): Selector bridge
broadcast(1): Broadcast bridge
ApsBridgeType
Type Values:
1broadcast
2selector
Description:
APS bridge type
 .1.3.6.1.4.1.3902.3.6000.200.2.1.8

zxAPSLineProtectPWConfigTable

table
.1.3.6.1.4.1.3902.3.6000.200.3 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAPSLineProtectPWConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPAPS-MIB::zxAPSLineProtectPWConfigTable' 
Configuration table of pw group's APS
zxAPSLineProtectPWConfigEntry row .1.3.6.1.4.1.3902.3.6000.200.3.1
Configuration entry of pw group's APS
Indexes
Column Syntax OID
zxAPSLineProtectPWName
The group name of this protection group
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.200.3.1.1
zxAPSLineProtectPWActiveState
The active state of this protection group
restoreRun(0): Restore to run APS
pause(1): Pause APS
ApsActiveState
Type Values:
0restoreRun
1pause
Description:
APS active state
 .1.3.6.1.4.1.3902.3.6000.200.3.1.2
zxAPSLineProtectPWSendPMode
The protection mode of this protection group
send(0): To send APS packets
nosend(1): Not to send APS packets
ApsSendPMode
Type Values:
0send
1nosend
Description:
APS packet sending mode
 .1.3.6.1.4.1.3902.3.6000.200.3.1.3
zxAPSLineProtectPWHoldOffTime
The hold-off time of this protection group
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.3.6000.200.3.1.4
zxAPSLineProtectPWRevertMode
The revertive mode of this protection group
revertive(0): APS is in revertive operation, which normal traffic
signal is restored to the working transport entity after the
condition(s) causing a switch has been cleared…
ApsRevertMode
Type Values:
0revertive
1nonrevertive
Description:
APS revertive mode
 .1.3.6.1.4.1.3902.3.6000.200.3.1.5
zxAPSLineProtectPWWTRTime
The wait-to-restore time of this protection group
Unsigned32
Constraints:
range: 0-12
 .1.3.6.1.4.1.3902.3.6000.200.3.1.6
zxAPSLineProtectPWSwitchFlag
The switch command of this protection group
none(0): The switch command hasn't been configured or has been cleared
clear(1): Clear the externally initiated command and WTR
lockout(2): Prevent a working signal from being…
ApsSwitchCmd
Type Values:
0none
1clear
2lockout
3fsP
4msP
5exercise
6fsW
7msW
Description:
APS switch command
 .1.3.6.1.4.1.3902.3.6000.200.3.1.7
zxAPSLineProtectPWBridgeType
The bridge type of this protection group
selector(2): Selector bridge
broadcast(1): Broadcast bridge
ApsBridgeType
Type Values:
1broadcast
2selector
Description:
APS bridge type
 .1.3.6.1.4.1.3902.3.6000.200.3.1.8

zxAPSLineProtectTGStatusTable

table
.1.3.6.1.4.1.3902.3.6000.200.4 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAPSLineProtectTGStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPAPS-MIB::zxAPSLineProtectTGStatusTable' 
Status table of tunnel protection group's APS
zxAPSLineProtectTGStatusEntry row .1.3.6.1.4.1.3902.3.6000.200.4.1
Status entry of tunnel protection group's APS
Indexes
Column Syntax OID
zxAPSLineProtectTGStatusTGID
The group id of this protection group
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.3.6000.200.4.1.1
zxAPSLineProtectTGStatusState
The current APS state of this protection group
noRequestNull(0): There is no request or the far end has
configured lockout
noRequestNormal(1): The far end has request which makes normal
traffic signal be selected from …
ApsStatusState
Type Values:
0noRequestNull
1noRequestNormal
2lockout
3forcedSwitch
4signalFailW
5signalFailP
6manualSwitch
7waitToRestore
8exerciseNull
9exerciseNormal
10doNotRevert
11signalDegrW
12signalDegrP
13manualSwitchW
14forcedSwitchW
15mappingSwitchW
16mappingSwitchP
17reverseRequestNull
18reverseRequestNormal
Description:
APS state
 .1.3.6.1.4.1.3902.3.6000.200.4.1.2

zxAPSLineProtectPWStatusTable

table
.1.3.6.1.4.1.3902.3.6000.200.5 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAPSLineProtectPWStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPAPS-MIB::zxAPSLineProtectPWStatusTable' 
Status table of pw group's APS
zxAPSLineProtectPWStatusEntry row .1.3.6.1.4.1.3902.3.6000.200.5.1
Status entry of pw group's APS
Indexes
Column Syntax OID
zxAPSLineProtectPWStatusPWName
The group name of this protection group
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.200.5.1.1
zxAPSLineProtectPWStatusState
The current APS state of this protection group
noRequestNull(0): There is no request or the far end has
configured lockout
noRequestNormal(1): The far end has request which makes normal
traffic signal be selected from…
ApsStatusState
Type Values:
0noRequestNull
1noRequestNormal
2lockout
3forcedSwitch
4signalFailW
5signalFailP
6manualSwitch
7waitToRestore
8exerciseNull
9exerciseNormal
10doNotRevert
11signalDegrW
12signalDegrP
13manualSwitchW
14forcedSwitchW
15mappingSwitchW
16mappingSwitchP
17reverseRequestNull
18reverseRequestNormal
Description:
APS state
 .1.3.6.1.4.1.3902.3.6000.200.5.1.2

zxAPSLineProtectPGConfigTable

table
.1.3.6.1.4.1.3902.3.6000.200.6 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAPSLineProtectPGConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPAPS-MIB::zxAPSLineProtectPGConfigTable' 
Configuration table of port protection group's APS
zxAPSLineProtectPGConfigEntry row .1.3.6.1.4.1.3902.3.6000.200.6.1
Configuration entry of port protection group's APS
Indexes
Column Syntax OID
zxAPSLineProtectPGPGID
The group id of this protection group
Unsigned32
Constraints:
range: 1-65536
 .1.3.6.1.4.1.3902.3.6000.200.6.1.1
zxAPSLineProtectPGActiveState
The active state of this protection group
restoreRun(0): Restore to run APS
pause(1): Pause APS
ApsActiveState
Type Values:
0restoreRun
1pause
Description:
APS active state
 .1.3.6.1.4.1.3902.3.6000.200.6.1.2
zxAPSLineProtectPGHoldOffTime
The hold-off time of this protection group
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.3.6000.200.6.1.4
zxAPSLineProtectPGRevertMode
The revertive mode of this protection group
revertive(0): APS is in revertive operation, which normal traffic
signal is restored to the working transport entity after the
condition(s) causing a switch has been cleared
…
ApsRevertMode
Type Values:
0revertive
1nonrevertive
Description:
APS revertive mode
 .1.3.6.1.4.1.3902.3.6000.200.6.1.5
zxAPSLineProtectPGWTRTime
The wait-to-restore time of this protection group
Unsigned32
Constraints:
range: 0-12
 .1.3.6.1.4.1.3902.3.6000.200.6.1.6
zxAPSLineProtectPGSwitchFlag
The switch command of this protection group
none(0): The switch command hasn't been configured or has been cleared
clear(1): Clear the externally initiated command and WTR
lockout(2): Prevent a working signal from being…
ApsSwitchCmd
Type Values:
0none
1clear
2lockout
3fsP
4msP
5exercise
6fsW
7msW
Description:
APS switch command
 .1.3.6.1.4.1.3902.3.6000.200.6.1.7

zxAPSLineProtectPGStatusTable

table
.1.3.6.1.4.1.3902.3.6000.200.7 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAPSLineProtectPGStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXROSNG-TPAPS-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXROSNG-TPAPS-MIB::zxAPSLineProtectPGStatusTable' 
Status table of port group's APS
zxAPSLineProtectPGStatusEntry row .1.3.6.1.4.1.3902.3.6000.200.7.1
Status entry of port group's APS
Indexes
Column Syntax OID
zxAPSLineProtectPGStatusPGID
The group id of this protection group
Unsigned32
Constraints:
range: 1-65536
 .1.3.6.1.4.1.3902.3.6000.200.7.1.1
zxAPSLineProtectPGStatusState
The current APS state of this protection group
noRequestNull(0): There is no request or the far end has
configured lockout
noRequestNormal(1): The far end has request which makes normal
traffic signal be selected from…
ApsStatusState
Type Values:
0noRequestNull
1noRequestNormal
2lockout
3forcedSwitch
4signalFailW
5signalFailP
6manualSwitch
7waitToRestore
8exerciseNull
9exerciseNormal
10doNotRevert
11signalDegrW
12signalDegrP
13manualSwitchW
14forcedSwitchW
15mappingSwitchW
16mappingSwitchP
17reverseRequestNull
18reverseRequestNormal
Description:
APS state
 .1.3.6.1.4.1.3902.3.6000.200.7.1.2