ZXR10-SQA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
20
Rows
20
Columns
342

sqaTestTable

table
.1.3.6.1.4.1.3902.3.6000.132.1 · 1 row entry · 23 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestTable' 
sqa test entity configuration
sqaTestEntry row .1.3.6.1.4.1.3902.3.6000.132.1.1
sqa test entity configuration table
Indexes
Column Syntax OID
sqaTestNum
sqa test num. The range of this parameter depend on the device.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.1.1.1
sqaTestType
sqa test type
TestType
Type Values:
1icmp
2tcp
3udp
4ftp
5dns
6udpjitter
7http
8snmp
9icmpjitter
Description:
sqa test type
 .1.3.6.1.4.1.3902.3.6000.132.1.1.2
sqaTestVrf
sqa test vrf
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.1.1.3
sqaTestDesIP
sqa des ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.1.1.4
sqaTestDesPort
sqa des port
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.6000.132.1.1.5
sqaTestSourceIP
sqa test source ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.1.1.6
sqaTestRepeat
sqa test repeat
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.6000.132.1.1.7
sqaTestSize
sqa test size
Unsigned32
Constraints:
range: 0-8192
 .1.3.6.1.4.1.3902.3.6000.132.1.1.8
sqaTestTos
sqa test tos,256 is the invalid value
Unsigned32
Constraints:
range: 0-256
 .1.3.6.1.4.1.3902.3.6000.132.1.1.9
sqaTestTtl
sqa test ttl
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.3.6000.132.1.1.10
sqaTestTimeoutobsolete
sqa test timeout
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.1.1.11
sqaTestInterval
sqa test interval
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.6000.132.1.1.12
sqaTestFtpName
sqa test ftp name
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.1.1.13
sqaTestFtpPassword
sqa test ftp encrypted password,
the length of this password is 64
SNMPv2-TCDisplayString
Constraints:
range: 64-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.1.1.14
sqaTestFtpFileName
sqa test ftp file name
SNMPv2-TCDisplayString
Constraints:
range: 0-79
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.1.1.15
sqaTestFtpRoot
sqa test ftp root
SNMPv2-TCDisplayString
Constraints:
range: 0-151
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.1.1.16
sqaTestTrapenable
sqa test trap enable
TestTrapOnOff
Type Values:
1on
2off
Description:
sqa test trap enable or disable
 .1.3.6.1.4.1.3902.3.6000.132.1.1.18
sqaTestTrapPercent
sqa test trap percent
Unsigned32
Constraints:
range: 1-100
 .1.3.6.1.4.1.3902.3.6000.132.1.1.19
sqaTestStatus
sqa test status
TestStatus
Type Values:
1sqaIdle
2sqaWaitingFirst
3sqaWaitingNext
4sqaWaitingResult
5sqaSuccessEnd
6sqaErrorEnd
7sqaIpstackErrorEnd
8sqaPauseEnd
9sqaEntityBusy
10sqaWaitingTimerange
11sqaWaitingIpstackUpcall
12sqaWaitingConfig
13sqaFinished
14sqaRunning
Description:
sqa test status
 .1.3.6.1.4.1.3902.3.6000.132.1.1.21
sqaTestTimeRange
sqa test time range
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.1.1.22
sqaTestDestinationUrl
sqa test destination url
SNMPv2-TCDisplayString
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.1.1.23
sqaTestDscp
sqa test dscp,255 is the invalid value
Unsigned32
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.1.1.24
sqaTestSnmpCommunity
sqa test encrypted community,
the length of this community is 64
SNMPv2-TCDisplayString
Constraints:
range: 64-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.1.1.25

sqaTestIcmpResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.10 · 1 row entry · 23 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestIcmpResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestIcmpResultTable' 
sqa icmp result table
sqaTestIcmpResultEntry row .1.3.6.1.4.1.3902.3.6000.132.10.1
sqa icmp result entry
Indexes
Column Syntax OID
sqaTestIcmpResultTestNum
sqa icmp test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.10.1.1
sqaTestIcmpResultRepeat
sqa icmp result repeat
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.10.1.2
sqaTestIcmpResultResponse
sqa icmp result response
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.6000.132.10.1.3
sqaTestIcmpResultStatus
sqa icmp result status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.10.1.4
sqaTestIcmpResultDesIP
sqa icmp result des ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.10.1.5
sqaTestIcmpResultMinRTT
sqa icmp result min rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.6
sqaTestIcmpResultMaxRTT
sqa icmp result max rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.7
sqaTestIcmpResultAvgRTT
sqa icmp result avg rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.8
sqaTestIcmpResultSumRTT
sqa icmp result sum rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.9
sqaTestIcmpResultProbeTime
sqa icmp result probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.10.1.10
sqaTestIcmpResultPacketLossRate
sqa icmp result packet loss rate
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.10.1.11
sqaTestIcmpResultMinPosJitter
sqa icmp result min pos jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.12
sqaTestIcmpResultMaxPosJitter
sqa icmp result max pos jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.13
sqaTestIcmpResultAvgPosJitter
sqa icmp result avg pos jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.14
sqaTestIcmpResultSumPosJitter
sqa icmp result sum pos jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.15
sqaTestIcmpResultMinNegJitter
sqa icmp result min neg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.16
sqaTestIcmpResultMaxNegJitter
sqa icmp result max neg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.17
sqaTestIcmpResultAvgNegJitter
sqa icmp result avg neg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.18
sqaTestIcmpResultSumNegJitter
sqa icmp result sum neg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.19
sqaTestIcmpResultMinJitter
sqa icmp result min jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.20
sqaTestIcmpResultMaxJitter
sqa icmp result max jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.21
sqaTestIcmpResultAvgJitter
sqa icmp result avg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.22
sqaTestIcmpResultSumJitter
sqa icmp result sum jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.10.1.23

sqaTestUdpResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.11 · 1 row entry · 23 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestUdpResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestUdpResultTable' 
sqa udp result table
sqaTestUdpResultEntry row .1.3.6.1.4.1.3902.3.6000.132.11.1
sqa udp result entry
Indexes
Column Syntax OID
sqaTestUdpResultTestNum
sqa udp result test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.11.1.1
sqaTestUdpResultRepeat
sqa udp result repeat
Unsigned32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.3902.3.6000.132.11.1.2
sqaTestUdpResultResponse
sqa udp result response
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.3902.3.6000.132.11.1.3
sqaTestUdpResultStatus
sqa udp result status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.11.1.4
sqaTestUdpResultDesIP
sqa udp result des ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.11.1.5
sqaTestUdpResultMinRTT
sqa udp result min rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.6
sqaTestUdpResultMaxRTT
sqa udp result max rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.7
sqaTestUdpResultAvgRTT
sqa udp result avg rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.8
sqaTestUdpResultSumRTT
sqa udp result sum rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.9
sqaTestUdpResultMinPosJitter
sqa udp result min pos jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.10
sqaTestUdpResultMaxPosJitter
sqa udp result max pos jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.11
sqaTestUdpResultAvgPosJitter
sqa udp result avg pos jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.12
sqaTestUdpResultSumPosJitter
sqa udp result sum pos jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.13
sqaTestUdpResultMinNegJitter
sqa udp result min neg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.14
sqaTestUdpResultMaxNegJitter
sqa udp result max neg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.15
sqaTestUdpResultAvgNegJitter
sqa udp result avg neg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.16
sqaTestUdpResultSumNegJitter
sqa udp result sum neg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.17
sqaTestUdpResultProbeTime
sqa udp result probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.11.1.18
sqaTestUdpResultPacketLossRate
sqa udp result packet loss rate
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.11.1.19
sqaTestUdpResultMinJitter
sqa udp result min jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.20
sqaTestUdpResultMaxJitter
sqa udp result max jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.21
sqaTestUdpResultAvgJitter
sqa udp result avg jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.22
sqaTestUdpResultSumJitter
sqa udp result sum jitter
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.11.1.23

sqaTestTcpResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.12 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestTcpResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestTcpResultTable' 
sqa tcp result table
sqaTestTcpResultEntry row .1.3.6.1.4.1.3902.3.6000.132.12.1
sqa tcp result entry
Indexes
Column Syntax OID
sqaTestTcpResultTestNum
sqa tcp result test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.12.1.1
sqaTestTcpResultRepeat
sqa tcp result repeat
Unsigned32
Constraints:
range: 1-200
 .1.3.6.1.4.1.3902.3.6000.132.12.1.2
sqaTestTcpResultResponse
sqa tcp result response
Unsigned32
Constraints:
range: 0-200
 .1.3.6.1.4.1.3902.3.6000.132.12.1.3
sqaTestTcpResultStatus
sqa tcp result status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.12.1.4
sqaTestTcpResultDesIP
sqa tcp result des ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.12.1.5
sqaTestTcpResultMinRTT
sqa tcp result min rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.12.1.6
sqaTestTcpResultMaxRTT
sqa tcp result max rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.12.1.7
sqaTestTcpResultAvgRTT
sqa tcp result avg rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.12.1.8
sqaTestTcpResultSumRTT
sqa tcp result sum rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.12.1.9
sqaTestTcpResultProbeTime
sqa tcp result probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.12.1.10

sqaTestFtpResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.13 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestFtpResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestFtpResultTable' 
sqa ftp result table
sqaTestFtpResultEntry row .1.3.6.1.4.1.3902.3.6000.132.13.1
sqa ftp result entry
Indexes
Column Syntax OID
sqaTestFtpResultTestNum
sqa ftp result test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.13.1.1
sqaTestFtpResultStatus
sqa ftp result test status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.13.1.2
sqaTestFtpResultLastRTT
sqa ftp result last rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.13.1.3
sqaTestFtpResultReadBytes
sqa ftp result read bytes
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.13.1.4
sqaTestFtpResultProbeTime
sqa ftp result probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.13.1.5

sqaTestDnsResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.14 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestDnsResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestDnsResultTable' 
sqa dns result table
sqaTestDnsResultEntry row .1.3.6.1.4.1.3902.3.6000.132.14.1
sqa dns result entry
Indexes
Column Syntax OID
sqaTestDnsResultTestNum
sqa dns result test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.14.1.1
sqaTestDnsResultRepeat
sqa dns result repeat
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.3902.3.6000.132.14.1.2
sqaTestDnsResultResponse
sqa dns result response
Unsigned32
Constraints:
range: 0-10
 .1.3.6.1.4.1.3902.3.6000.132.14.1.3
sqaTestDnsResultStatus
sqa dns result status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.14.1.4
sqaTestDnsResultResolvedIP
sqa dns result resolved ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.14.1.5
sqaTestDnsResultMinRTT
sqa dns result min rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.14.1.6
sqaTestDnsResultMaxRTT
sqa dns result max rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.14.1.7
sqaTestDnsResultAvgRTT
sqa dns result avg rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.14.1.8
sqaTestDnsResultSumRTT
sqa dns result sum rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.14.1.9
sqaTestDnsResultProbeTime
sqa dns result probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.14.1.10
sqaTestDnsResultDesurl
sqa dns result destination url
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.14.1.11

sqaTestUdpJitterResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.15 · 1 row entry · 36 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestUdpJitterResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestUdpJitterResultTable' 
sqa udp jitter result table
sqaTestUdpJitterResultEntry row .1.3.6.1.4.1.3902.3.6000.132.15.1
sqa udp jitter result entry
Indexes
Column Syntax OID
sqaTestUdpJitterResultTestNum
sqa udp jitter result test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.15.1.1
sqaTestUdpJitterResultRepeat
sqa udp jitter result repeat
Unsigned32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.3902.3.6000.132.15.1.2
sqaTestUdpJitterResultResponse
sqa udp jitter result response
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.3902.3.6000.132.15.1.3
sqaTestUdpJitterResultStatus
sqa udp jitter result status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.15.1.4
sqaTestUdpJitterResultDesIP
sqa udp jitter result des ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.15.1.5
sqaTestUdpJitterResultMinRTTSD
sqa udp jitter result min rtt sd
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.132.15.1.6
sqaTestUdpJitterResultMaxRTTSD
sqa udp jitter result max rtt sd
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.132.15.1.7
sqaTestUdpJitterResultAvgRTTSD
sqa udp jitter result avg rtt sd
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.132.15.1.8
sqaTestUdpJitterResultSumRTTSD
sqa udp jitter result sum rtt sd
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.132.15.1.9
sqaTestUdpJitterResultMinRTTDS
sqa udp jitter result min rtt ds
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.132.15.1.10
sqaTestUdpJitterResultMaxRTTDS
sqa udp jitter result max rtt ds
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.132.15.1.11
sqaTestUdpJitterResultAvgRTTDS
sqa udp jitter result avg rtt ds
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.132.15.1.12
sqaTestUdpJitterResultSumRTTDS
sqa udp jitter result sum rtt ds
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.132.15.1.13
sqaTestUdpJitterResultMinPosSD
sqa udp jitter result min pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.14
sqaTestUdpJitterResultMaxPosSD
sqa udp jitter result max pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.15
sqaTestUdpJitterResultAvgPosSD
sqa udp jitter result avg pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.16
sqaTestUdpJitterResultSumPosSD
sqa udp jitter result sum pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.17
sqaTestUdpJitterResultNumPosSDobsolete
sqa udp jitter result num pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.18
sqaTestUdpJitterResultMinNegSD
sqa udp jitter result min neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.19
sqaTestUdpJitterResultMaxNegSD
sqa udp jitter result max neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.20
sqaTestUdpJitterResultAvgNegSD
sqa udp jitter result avg neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.21
sqaTestUdpJitterResultSumNegSD
sqa udp jitter result sum neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.22
sqaTestUdpJitterResultNumNegSDobsolete
sqa udp jitter result num neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.23
sqaTestUdpJitterResultMinPosDS
sqa udp jitter result min pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.24
sqaTestUdpJitterResultMaxPosDS
sqa udp jitter result max pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.25
sqaTestUdpJitterResultAvgPosDS
sqa udp jitter result avg pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.26
sqaTestUdpJitterResultSumPosDS
sqa udp jitter result sum pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.27
sqaTestUdpJitterResultNumPosDSobsolete
sqa udp jitter result num pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.28
sqaTestUdpJitterResultMinNegDS
sqa udp jitter result min neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.29
sqaTestUdpJitterResultMaxNegDS
sqa udp jitter result max neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.30
sqaTestUdpJitterResultAvgNegDS
sqa udp jitter result avg neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.31
sqaTestUdpJitterResultSumNegDS
sqa udp jitter result sum neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.32
sqaTestUdpJitterResultNumNegDSobsolete
sqa udp jitter result num neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.33
sqaTestUdpJitterResultDisposeNumSD
sqa udp jitter result dispose num sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.34
sqaTestUdpJitterResultDisposeNumDS
sqa udp jitter result dispose num ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.15.1.35
sqaTestUdpJitterResultProbeTime
sqa udp jitterresult probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.15.1.36

sqaTestSnmpResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.16 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestSnmpResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestSnmpResultTable' 
sqa snmp result table
sqaTestSnmpResultEntry row .1.3.6.1.4.1.3902.3.6000.132.16.1
sqa snmp result entry
Indexes
Column Syntax OID
sqaTestSnmpResultTestNum
sqa snmp result test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.16.1.1
sqaTestSnmpResultStatus
sqa snmp result test status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.16.1.2
sqaTestSnmpResultRTT
sqa snmp result last rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.16.1.3
sqaTestSnmpResultProbeTime
sqa snmp result probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.16.1.4

sqaTestHttpResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.17 · 1 row entry · 26 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestHttpResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestHttpResultTable' 
sqa http result table
sqaTestHttpResultEntry row .1.3.6.1.4.1.3902.3.6000.132.17.1
sqa http result entry
Indexes
Column Syntax OID
sqaTestHttpResultTestNum
sqa http result test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.17.1.1
sqaTestHttpResultRepeat
sqa http result repeat
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.3902.3.6000.132.17.1.2
sqaTestHttpResultResponse
sqa http result response
Unsigned32
Constraints:
range: 0-10
 .1.3.6.1.4.1.3902.3.6000.132.17.1.3
sqaTestHttpResultStatus
sqa http result status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.17.1.4
sqaTestHttpResultDesIP
sqa http result des ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.17.1.5
sqaTestHttpResultDesurl
sqa http result destination url
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.17.1.6
sqaTestHttpResultDNSMinRTT
sqa http result dns min rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.7
sqaTestHttpResultDNSMaxRTT
sqa http result dns max rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.8
sqaTestHttpResultDNSAvgRTT
sqa http result dns avg rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.9
sqaTestHttpResultDNSSumRTT
sqa http result dns sum rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.10
sqaTestHttpResultDNSNumobsolete
sqa http result dns num
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.11
sqaTestHttpResultTCPMinRTT
sqa http result tcp min rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.12
sqaTestHttpResultTCPMaxRTT
sqa http result tcp max rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.13
sqaTestHttpResultTCPAvgRTT
sqa http result tcp avg rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.14
sqaTestHttpResultTCPSumRTT
sqa http result tcp sum rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.15
sqaTestHttpResultTCPNumobsolete
sqa http result tcp num
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.16
sqaTestHttpResultHTTPMinRTT
sqa http result http min rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.17
sqaTestHttpResultHTTPMaxRTT
sqa http result http max rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.18
sqaTestHttpResultHTTPAvgRTT
sqa http result http avg rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.19
sqaTestHttpResultHTTPSumRTT
sqa http result http sum rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.20
sqaTestHttpResultHTTPNumobsolete
sqa http result http num
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.21
sqaTestHttpResultMinRTT
sqa http result min rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.22
sqaTestHttpResultMaxRTT
sqa http result max rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.23
sqaTestHttpResultAvgRTT
sqa http result avg rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.24
sqaTestHttpResultSumRTT
sqa http result sum rtt
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.17.1.25
sqaTestHttpResultProbeTime
sqa http result probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.17.1.26

sqaTestIcmpJitterResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.18 · 1 row entry · 30 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestIcmpJitterResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestIcmpJitterResultTable' 
sqa icmp jitter result table
sqaTestIcmpJitterResultEntry row .1.3.6.1.4.1.3902.3.6000.132.18.1
sqa icmp jitter result entry
Indexes
Column Syntax OID
sqaTestIcmpJitterResultTestNum
sqa icmp jitter result test num
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.18.1.1
sqaTestIcmpJitterResultRepeat
sqa icmp jitter result repeat
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.18.1.2
sqaTestIcmpJitterResultResponse
sqa icmp jitter result response
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.3.6000.132.18.1.3
sqaTestIcmpJitterResultStatus
sqa icmp jitter result status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.18.1.4
sqaTestIcmpJitterResultDesIP
sqa icmp jitter result des ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.18.1.5
sqaTestIcmpJitterResultMinRTTSD
sqa icmp jitter result min rtt sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.6
sqaTestIcmpJitterResultMaxRTTSD
sqa icmp jitter result max rtt sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.7
sqaTestIcmpJitterResultAvgRTTSD
sqa icmp jitter result avg rtt sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.8
sqaTestIcmpJitterResultSumRTTSD
sqa icmp jitter result sum rtt sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.9
sqaTestIcmpJitterResultMinRTTDS
sqa icmp jitter result min rtt ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.10
sqaTestIcmpJitterResultMaxRTTDS
sqa udp jitter result max rtt ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.11
sqaTestIcmpJitterResultAvgRTTDS
sqa icmp jitter result avg rtt ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.12
sqaTestIcmpJitterResultSumRTTDS
sqa icmp jitter result sum rtt ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.13
sqaTestIcmpJitterResultMinPosSD
sqa icmp jitter result min pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.14
sqaTestIcmpJitterResultMaxPosSD
sqa icmp jitter result max pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.15
sqaTestIcmpJitterResultAvgPosSD
sqa icmp jitter result avg pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.16
sqaTestIcmpJitterResultSumPosSD
sqa icmp jitter result sum pos sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.17
sqaTestIcmpJitterResultMinNegSD
sqa icmp jitter result min neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.18
sqaTestIcmpJitterResultMaxNegSD
sqa icmp jitter result max neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.19
sqaTestIcmpJitterResultAvgNegSD
sqa icmp jitter result avg neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.20
sqaTestIcmpJitterResultSumNegSD
sqa icmp jitter result sum neg sd
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.21
sqaTestIcmpJitterResultMinPosDS
sqa icmp jitter result min pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.22
sqaTestIcmpJitterResultMaxPosDS
sqa icmp jitter result max pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.23
sqaTestIcmpJitterResultAvgPosDS
sqa icmp jitter result avg pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.24
sqaTestIcmpJitterResultSumPosDS
sqa icmp jitter result sum pos ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.25
sqaTestIcmpJitterResultMinNegDS
sqa icmp jitter result min neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.26
sqaTestIcmpJitterResultMaxNegDS
sqa icmp jitter result max neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.27
sqaTestIcmpJitterResultAvgNegDS
sqa icmp jitter result avg neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.28
sqaTestIcmpJitterResultSumNegDS
sqa icmp jitter result sum neg ds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.132.18.1.29
sqaTestIcmpJitterResultProbeTime
sqa icmp jitterresult probe time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.18.1.30

sqaTestSenderTable

table
.1.3.6.1.4.1.3902.3.6000.132.19 · 1 row entry · 49 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestSenderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestSenderTable' 
sqa generalflow sender table
sqaTestSenderEntry row .1.3.6.1.4.1.3902.3.6000.132.19.1
sqa generalflow sender entry
Indexes
Column Syntax OID
sqaTestSenderTestNum
sqa sender test num. The range of this parameter depend on the device.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.19.1.1
sqaTestSenderClientMode
sqa sender client mode, 1: l2-uni, 2: l3-uni, 3: l2-bridge-uni, 255: undefined(invalid)
TestClientMode
Type Values:
1uni-12
2uni-13
3bridge-uni-12
255undefined
Description:
sqa test client mode
 .1.3.6.1.4.1.3902.3.6000.132.19.1.2
sqaTestSenderInboundInterface
sqa sender inbound interface
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.19.1.3
sqaTestSenderTestMode
sqa sender test mode, 1: share-mode(default), 2: exclusive-mode
TestTestMode
Type Values:
1share-mode
2exclusive-mode
Description:
sqa test test mode
 .1.3.6.1.4.1.3902.3.6000.132.19.1.4
sqaTestSenderDisNonTest8021p
sqa sender disNonTest8021p, 255: undefined(invalid)
Unsigned32
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.19.1.5
sqaTestSenderDisNonTestDscp
sqa sender disNonTestDscp, 255: undefined(invalid)
Unsigned32
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.19.1.6
sqaTestSenderReflectorMode
sqa sender reflector mode, 1:l1, 2:l2, 3:l3, 4:l4, 5:default
TestReflectorMode
Type Values:
1l1
2l2
3l3
4l4
5default
Description:
sqa test reflector mode
 .1.3.6.1.4.1.3902.3.6000.132.19.1.7
sqaTestSenderSourceMac
sqa sender source mac
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.3.6000.132.19.1.8
sqaTestSenderDestinationMac
sqa sender destination mac
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.3.6000.132.19.1.9
sqaTestSenderSourceIp
sqa sender source ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.19.1.10
sqaTestSenderDestinationIp
sqa sender destination ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.19.1.11
sqaTestSenderVlanId
sqa sender vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.19.1.12
sqaTestSenderInVlanId
sqa sender internal vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.19.1.13
sqaTestSenderExVlanId
sqa sender external vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.19.1.14
sqaTestSenderPriority8021p
sqa sender priority8021p, default: 0
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.3.6000.132.19.1.15
sqaTestSenderDscp
sqa sender dscp, default: 0
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.6000.132.19.1.16
sqaTestSenderTpEnable
sqa sender throughput enable
TestEnableStatus
Type Values:
1enable
2disable
Description:
sqa test enable status
 .1.3.6.1.4.1.3902.3.6000.132.19.1.17
sqaTestSenderTpRateType
sqa sender throughput rate type, 1: ir(default), 2: ulr
TestRateType
Type Values:
1ir
2ulr
Description:
sqa test rate type
 .1.3.6.1.4.1.3902.3.6000.132.19.1.18
sqaTestSenderTpHighRate
sqa sender throughput high rate, unit : kbps
Unsigned32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.3902.3.6000.132.19.1.19
sqaTestSenderTpLowRate
sqa sender throughput low rate, unit : kbps
Unsigned32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.3902.3.6000.132.19.1.20
sqaTestSenderTpTimeOut
sqa sender throughput timeout, default: 4s, unit : s
Unsigned32
Constraints:
range: 1-60
 .1.3.6.1.4.1.3902.3.6000.132.19.1.21
sqaTestSenderTpOneRateDuration
sqa sender throughput one rate duration, default: 4s, unit : s
Unsigned32
Constraints:
range: 1-60
 .1.3.6.1.4.1.3902.3.6000.132.19.1.22
sqaTestSenderTpDuration
sqa sender throughput duration, 0: undefined(invalid), unit : s
Unsigned32
Constraints:
range: 0-0
range: 10-172800
 .1.3.6.1.4.1.3902.3.6000.132.19.1.23
sqaTestSenderTpPrecision
sqa sender throughput precision, default: 1000kbps, unit : kbps
Unsigned32
Constraints:
range: 1-10000
 .1.3.6.1.4.1.3902.3.6000.132.19.1.24
sqaTestSenderTpLossThreshold
sqa sender throughput loss threshold, default: 0, unit : 1/10000
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.3.6000.132.19.1.25
sqaTestSenderLossEnable
sqa sender loss enable
TestEnableStatus
Type Values:
1enable
2disable
Description:
sqa test enable status
 .1.3.6.1.4.1.3902.3.6000.132.19.1.26
sqaTestSenderLossRateType
sqa sender loss rate type, 1: ir(default), 2: ulr
TestRateType
Type Values:
1ir
2ulr
Description:
sqa test rate type
 .1.3.6.1.4.1.3902.3.6000.132.19.1.27
sqaTestSenderLossRate
sqa sender loss rate, default: 1000kbps, unit : kbps
Unsigned32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.3902.3.6000.132.19.1.28
sqaTestSenderLossTimeOut
sqa sender loss timeout, default: 4s, unit : s
Unsigned32
Constraints:
range: 1-60
 .1.3.6.1.4.1.3902.3.6000.132.19.1.29
sqaTestSenderLossDuration
sqa sender loss duration, default: 60s, unit : s
Unsigned32
Constraints:
range: 10-172800
 .1.3.6.1.4.1.3902.3.6000.132.19.1.30
sqaTestSenderLossRatioThreshold
sqa sender loss ratio threshold, default: 0, unit : 1/10000
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.3.6000.132.19.1.31
sqaTestSenderDelayEnable
sqa sender delay enable
TestEnableStatus
Type Values:
1enable
2disable
Description:
sqa test enable status
 .1.3.6.1.4.1.3902.3.6000.132.19.1.32
sqaTestSenderDelayRateType
sqa sender delay rate type, 1: ir(default), 2: ulr
TestRateType
Type Values:
1ir
2ulr
Description:
sqa test rate type
 .1.3.6.1.4.1.3902.3.6000.132.19.1.33
sqaTestSenderDelayRate
sqa sender delay rate, default: 1000kbps, unit : kbps
Unsigned32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.3902.3.6000.132.19.1.34
sqaTestSenderDelayInterval
sqa sender delay interval, default: 4s, unit : s
Unsigned32
Constraints:
range: 1-60
 .1.3.6.1.4.1.3902.3.6000.132.19.1.35
sqaTestSenderDelayDuration
sqa sender delay duration, default: 60s, unit : s
Unsigned32
Constraints:
range: 10-172800
 .1.3.6.1.4.1.3902.3.6000.132.19.1.36
sqaTestSenderDelayThreshold
sqa sender delay threshold, default: 20000ns, unit : us
Unsigned32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.3902.3.6000.132.19.1.37
sqaTestSenderJitterThreshold
sqa sender jitter threshold, default: 25000ns, unit : us
Unsigned32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.3902.3.6000.132.19.1.38
sqaTestSenderPacketSize1
sqa sender packet size1, unit : byte
Unsigned32
Constraints:
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.19.1.39
sqaTestSenderPacketSize2
sqa sender packet size2, unit : byte
Unsigned32
Constraints:
range: 0-0
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.19.1.40
sqaTestSenderPacketSize3
sqa sender packet size3, unit : byte
Unsigned32
Constraints:
range: 0-0
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.19.1.41
sqaTestSenderPacketSize4
sqa sender packet size4, unit : byte
Unsigned32
Constraints:
range: 0-0
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.19.1.42
sqaTestSenderPacketSize5
sqa sender packet size5, unit : byte
Unsigned32
Constraints:
range: 0-0
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.19.1.43
sqaTestSenderPacketSize6
sqa sender packet size6, unit : byte
Unsigned32
Constraints:
range: 0-0
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.19.1.44
sqaTestSenderPacketSize7
sqa sender packet size7, unit : byte
Unsigned32
Constraints:
range: 0-0
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.19.1.45
sqaTestSenderOnlineOfflineFlag
sqa sender online offline flag, 1: online, 2: offline
TestOnlineState
Type Values:
1online
2offline
Description:
sqa test online state
 .1.3.6.1.4.1.3902.3.6000.132.19.1.46
sqaTestSenderFreeArpEnable
sqa sender free arp enable
TestEnableStatus
Type Values:
1enable
2disable
Description:
sqa test enable status
 .1.3.6.1.4.1.3902.3.6000.132.19.1.47
sqaTestSenderFreeArpInterval
sqa sender free arp interval, default: 30s, unit : s
Unsigned32
Constraints:
range: 1-14400
 .1.3.6.1.4.1.3902.3.6000.132.19.1.48
sqaTestSenderTimeRange
sqa sender timerange
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.19.1.49

sqaTestReflectorTable

table
.1.3.6.1.4.1.3902.3.6000.132.20 · 1 row entry · 25 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestReflectorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestReflectorTable' 
sqa generalflow reflector table
sqaTestReflectorEntry row .1.3.6.1.4.1.3902.3.6000.132.20.1
sqa generalflow reflector entry
Indexes
Column Syntax OID
sqaTestReflectorId
sqa reflector ID
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.20.1.1
sqaTestReflectorRefMode
sqa reflector mode, 1: l2, 2: l3
ReflectorMode
Type Values:
1l2
2l3
Description:
sqa reflector mode
 .1.3.6.1.4.1.3902.3.6000.132.20.1.2
sqaTestReflectorInterface
sqa reflector inbound interface
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.20.1.3
sqaTestReflectorTestMode
sqa reflector test mode, 1: share-mode(default), 2: exclusive-mode
TestTestMode
Type Values:
1share-mode
2exclusive-mode
Description:
sqa test test mode
 .1.3.6.1.4.1.3902.3.6000.132.20.1.4
sqaTestReflectorDisNonTest8021p
sqa reflector disNonTest8021p, 255: undefined(invalid)
Unsigned32
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.20.1.5
sqaTestReflectorDisNonTestDscp
sqa reflector disNonTestDscp, 255: undefined(invalid)
Unsigned32
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.20.1.6
sqaTestReflectorAgeingTime
sqa reflector ageing time, 0 : continuous
Unsigned32
Constraints:
range: 0-173400
 .1.3.6.1.4.1.3902.3.6000.132.20.1.7
sqaTestReflectorSourceMac
sqa reflector source mac
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.3.6000.132.20.1.8
sqaTestReflectorDestinationMac
sqa reflector destination mac
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.3.6000.132.20.1.9
sqaTestReflectorSourceIp
sqa reflector source ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.20.1.10
sqaTestReflectorDestinationIp
sqa reflector destination ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.20.1.11
sqaTestReflectorSourcePort
sqa reflector source port, default: 49184
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.20.1.12
sqaTestReflectorDestinationPort
sqa reflector destination port, default: 7
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.20.1.13
sqaTestReflectorVlanId
sqa reflector vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.20.1.14
sqaTestReflectorInternalVlanId
sqa reflector internal vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.20.1.15
sqaTestReflectorExternalVlanId
sqa reflector external vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.20.1.16
sqaTestReflectorPriority8021p
sqa reflector priority8021p, 255: undefined(invalid)
Unsigned32
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.20.1.17
sqaTestReflectorDscp
sqa reflector DSCP, 255: undefined(invalid)
Unsigned32
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.20.1.18
sqaTestReflectorOnOfflineFlag
sqa reflector online flag, 1: online, 2: offline
TestOnlineState
Type Values:
1online
2offline
Description:
sqa test online state
 .1.3.6.1.4.1.3902.3.6000.132.20.1.19
sqaTestReflectorFreeArpEnable
sqa reflector free arp enable state
TestEnableStatus
Type Values:
1enable
2disable
Description:
sqa test enable status
 .1.3.6.1.4.1.3902.3.6000.132.20.1.20
sqaTestReflectorFreeArpIp
sqa reflector free arp local ip address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.20.1.21
sqaTestReflectorFreeArpVlanId
sqa reflector free arp vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.20.1.22
sqaTestReflectorFreeArpInVlanId
sqa reflector free arp internal vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.20.1.23
sqaTestReflectorFreeArpExVlanId
sqa reflector free arp external vlan id
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.3.6000.132.20.1.24
sqaTestReflectorFreeArpInterval
sqa reflector free arp send interval, unit : s
Unsigned32
Constraints:
range: 1-14400
 .1.3.6.1.4.1.3902.3.6000.132.20.1.25

sqaTestTpResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.21 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestTpResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestTpResultTable' 
sqa generalflow throughput test result table
sqaTestTpResultEntry row .1.3.6.1.4.1.3902.3.6000.132.21.1
sqa generalflow throughput test result entry
Indexes
Column Syntax OID
sqaTestTpResultTestNum
sqa generalflow throughput test number
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.21.1.1
sqaTestTpResultPacketSize
sqa generalflow throughput test packet size, unit : byte
Unsigned32
Constraints:
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.21.1.2
sqaTestTpResultUniInterface
sqa generalflow throughput test UNI interface
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.21.1.3
sqaTestTpResultPriority8021p
sqa generalflow throughput test result test priority 8021p
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.3.6000.132.21.1.4
sqaTestTpResultDscp
sqa generalflow throughput test result test dscp
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.6000.132.21.1.5
sqaTestTpResultPrecision
sqa generalflow throughput test result precision, unit : kbps
Unsigned32
Constraints:
range: 1-10000
 .1.3.6.1.4.1.3902.3.6000.132.21.1.6
sqaTestTpResultTp
sqa generalflow throughput test Throughput, unit : kbps
Unsigned32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.3902.3.6000.132.21.1.7
sqaTestTpResultInfoRate
sqa generalflow throughput test result info rate, unit : kbps
Unsigned32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.3902.3.6000.132.21.1.8
sqaTestTpResultLossRatio
sqa generalflow throughput test result loss ratio, unit : 1/10000
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.3.6000.132.21.1.9
sqaTestTpResultTestDuration
sqa generalflow throughput test duration, unit : s
Unsigned32
Constraints:
range: 0-172800
 .1.3.6.1.4.1.3902.3.6000.132.21.1.10
sqaTestTpResultStatus
sqa generalflow throughput test status
TpResultStatus
Type Values:
1pass
2durationTimeout
3lowRateConfigError
Description:
sqa throughputtest test result status,durationTimeout: Could not find throughtput in the specified time,lowRateConfigError: Configuration of the lowest rate can not meet the requirements of packet loss rate
 .1.3.6.1.4.1.3902.3.6000.132.21.1.11

sqaTestLossResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.22 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestLossResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestLossResultTable' 
sqa generalflow loss test result table
sqaTestLossResultEntry row .1.3.6.1.4.1.3902.3.6000.132.22.1
sqa generalflow loss test result entry
Indexes
Column Syntax OID
sqaTestLossResultTestNum
sqa generalflow loss test number
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.22.1.1
sqaTestLossResultPacketSize
sqa generalflow loss test packet size, unit : byte
Unsigned32
Constraints:
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.22.1.2
sqaTestLossResultUniInterface
sqa generalflow loss test UNI interface
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.22.1.3
sqaTestLossResultPriority8021p
sqa generalflow loss test result test priority 8021p
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.3.6000.132.22.1.4
sqaTestLossResultDscp
sqa generalflow loss test result test dscp
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.6000.132.22.1.5
sqaTestLossResultTestRate
sqa generalflow loss test result test rate, unit : kbps
Unsigned32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.3902.3.6000.132.22.1.6
sqaTestLossResultLossPktNumber
sqa generalflow loss test loss packet number
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.3.6000.132.22.1.7
sqaTestLossResultLossPktRatio
sqa generalflow loss test result loss packet ratio, unit : 1/10000
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.3.6000.132.22.1.8
sqaTestLossResultTestDuration
sqa generalflow loss test result duration, unit : s
Unsigned32
Constraints:
range: 0-172800
 .1.3.6.1.4.1.3902.3.6000.132.22.1.9
sqaTestLossResultStatus
sqa generalflow loss test status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.22.1.10

sqaTestDelayResultTable

table
.1.3.6.1.4.1.3902.3.6000.132.23 · 1 row entry · 14 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestDelayResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestDelayResultTable' 
sqa generalflow delay test result table
sqaTestDelayResultEntry row .1.3.6.1.4.1.3902.3.6000.132.23.1
sqa generalflow delay test result entry
Indexes
Column Syntax OID
sqaTestDelayResultTestNum
sqa generalflow delay test number
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.23.1.1
sqaTestDelayResultPacketSize
sqa generalflow delay test packet size, unit : byte
Unsigned32
Constraints:
range: 64-9216
 .1.3.6.1.4.1.3902.3.6000.132.23.1.2
sqaTestDelayResultUniInterface
sqa generalflow delay test UNI interface
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.23.1.3
sqaTestDelayResultPriority8021p
sqa generalflow delay test result test priority 8021p
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.3.6000.132.23.1.4
sqaTestDelayResultDscp
sqa generalflow delay test result test dscp
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.6000.132.23.1.5
sqaTestDelayResultTestRate
sqa generalflow delay test result test rate, unit : kbps
Unsigned32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.3902.3.6000.132.23.1.6
sqaTestDelayResultMinDelay
sqa generalflow delay test result min delay, unit : us
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.132.23.1.7
sqaTestDelayResultMaxDelay
sqa generalflow delay test result max delay, unit : us
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.132.23.1.8
sqaTestDelayResultAvgDelay
sqa generalflow delay test result avg delay, unit : us
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.132.23.1.9
sqaTestDelayResultMinJitter
sqa generalflow delay test result min jitter, unit : us
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.132.23.1.10
sqaTestDelayResultMaxJitter
sqa generalflow delay test result max jitter, unit : us
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.132.23.1.11
sqaTestDelayResultAvgJitter
sqa generalflow delay test result avg jitter, unit : us
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.132.23.1.12
sqaTestDelayResultTestDuration
sqa generalflow delay test result duration, unit : s
Unsigned32
Constraints:
range: 0-172800
 .1.3.6.1.4.1.3902.3.6000.132.23.1.13
sqaTestDelayResultStatus
sqa generalflow delay test status
TestResultStatus
Type Values:
1sqaSuccessEnd
2sqaErrorEnd
Description:
sqa test result status
 .1.3.6.1.4.1.3902.3.6000.132.23.1.14

sqaTestOperationTable

table
.1.3.6.1.4.1.3902.3.6000.132.25 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaTestOperationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaTestOperationTable' 
SQA test operation configuration
sqaTestOperationEntry row .1.3.6.1.4.1.3902.3.6000.132.25.1
SQA test operation entity configuration table
Indexes
Column Syntax OID
sqaOperationTestNum
SQA test number.The range of this parameter depend on the device.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.25.1.1
sqaTestOperation
SQA test operation type,1 means begin,2 means stop.
TestOperationr/w
Type Values:
1begin
2stop
Description:
sqa test operation
 .1.3.6.1.4.1.3902.3.6000.132.25.1.2

sqaUdpTestTable

table
.1.3.6.1.4.1.3902.3.6000.132.26 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaUdpTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaUdpTestTable' 
SQA UDP test entity configuration
sqaUdpTestEntry row .1.3.6.1.4.1.3902.3.6000.132.26.1
SQA UDP test entity configuration table
Indexes
Column Syntax OID
sqaUdpTestNum
SQA test number.The range of this parameter depend on the device.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.26.1.1
sqaUdpTestVrf
The name of VRF,this string length ranges from 1 to 32.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.26.1.2
sqaUdpTestDesIP
The destination IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.26.1.3
sqaUdpTestDesPort
The destination port number,ranges from 1025 to 65535.
Unsigned32r/w
Constraints:
range: 1025-65535
 .1.3.6.1.4.1.3902.3.6000.132.26.1.4
sqaUdpTestRepeat
The number of repeat times,ranges from 1 to 1000(default:1).
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.3902.3.6000.132.26.1.5
sqaUdpTestSize
The size of UDP packet,ranges from 50 to 1500(default:50),unit:byte.
Unsigned32r/w
Constraints:
range: 50-1500
 .1.3.6.1.4.1.3902.3.6000.132.26.1.6
sqaUdpTestTos
The TOS value,ranges from 0 to 255(default:0).
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.3.6000.132.26.1.7
sqaUdpTestInterval
The sending period of UDP packets,ranges from 50 to 2000(default:100),unit:ms.
Unsigned32r/w
Constraints:
range: 50-2000
 .1.3.6.1.4.1.3902.3.6000.132.26.1.8
sqaUdpTestRowStatus
Row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.132.26.1.9

sqaUdpJitterTestTable

table
.1.3.6.1.4.1.3902.3.6000.132.27 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaUdpJitterTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaUdpJitterTestTable' 
SQA UDP test entity configuration
sqaUdpJitterTestEntry row .1.3.6.1.4.1.3902.3.6000.132.27.1
SQA UDP jitter test entity configuration table
Indexes
Column Syntax OID
sqaUdpJitterTestNum
SQA test number.The range of this parameter depend on the device.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.27.1.1
sqaUdpJitterTestVrf
The name of VRF,this string length ranges from 1 to 32.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.27.1.2
sqaUdpJitterTestDesIP
The destination IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.27.1.3
sqaUdpJitterTestDesPort
The destination port number,ranges from 1025 to 65535.
Unsigned32r/w
Constraints:
range: 1025-65535
 .1.3.6.1.4.1.3902.3.6000.132.27.1.4
sqaUdpJitterTestRepeat
The number of repeat times,ranges from 1 to 1000(default:1).
Unsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.3902.3.6000.132.27.1.5
sqaUdpJitterTestSize
The size of UDP packet,ranges from 50 to 1500(default:50),unit:byte.
Unsigned32r/w
Constraints:
range: 50-1500
 .1.3.6.1.4.1.3902.3.6000.132.27.1.6
sqaUdpJitterTestTos
The TOS value,ranges from 0 to 255(default:0).
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.3.6000.132.27.1.7
sqaUdpJitterTestInterval
The sending period of UDP packets,ranges from 50 to 2000(default:100),unit:ms.
Unsigned32r/w
Constraints:
range: 50-2000
 .1.3.6.1.4.1.3902.3.6000.132.27.1.8
sqaUdpJitterTestRowStatus
Row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.132.27.1.9

sqaIcmpTestTable

table
.1.3.6.1.4.1.3902.3.6000.132.28 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaIcmpTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaIcmpTestTable' 
SQA ICMP test entity configuration
sqaIcmpTestEntry row .1.3.6.1.4.1.3902.3.6000.132.28.1
SQA ICMP test entity configuration table
Indexes
Column Syntax OID
sqaIcmpTestNum
SQA test number.The range of this parameter depend on the device.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.28.1.1
sqaIcmpTestVrf
The name of VRF,this string length ranges from 1 to 32.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.28.1.2
sqaIcmpTestDesIP
The destination IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.28.1.3
sqaIcmpTestSorceIP
The Source IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.28.1.4
sqaIcmpTestRepeat
The number of repeat times,ranges from 1 to 65535(default:1).
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.28.1.5
sqaIcmpTestSize
The size of ICMP packet,ranges from 36 to 8192(default:36),unit:byte.
Unsigned32r/w
Constraints:
range: 36-8192
 .1.3.6.1.4.1.3902.3.6000.132.28.1.6
sqaIcmpTestTos
The TOS value,ranges from 0 to 255(default:0),256 is the invalid value.
Unsigned32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.3902.3.6000.132.28.1.7
sqaIcmpTestTtl
The TTL value,ranges from 1 to 255(default:255).
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.3.6000.132.28.1.8
sqaIcmpTestInterval
The sending period of ICMP packets,ranges from 50 to 65535(default:100),unit:ms.
Unsigned32r/w
Constraints:
range: 50-65535
 .1.3.6.1.4.1.3902.3.6000.132.28.1.9
sqaIcmpTestDscp
The DSCP value,ranges from 0 to 63,255 is the invalid value.
Unsigned32r/w
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.28.1.10
sqaIcmpTestRowStatus
Row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.132.28.1.11

sqaIcmpJitterTestTable

table
.1.3.6.1.4.1.3902.3.6000.132.29 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk sqaIcmpJitterTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-SQA-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-SQA-MIB::sqaIcmpJitterTestTable' 
SQA ICMP jitter test entity configuration
sqaIcmpJitterTestEntry row .1.3.6.1.4.1.3902.3.6000.132.29.1
SQA ICMP jitter test entity configuration table
Indexes
Column Syntax OID
sqaIcmpJitterTestNum
SQA test number.The range of this parameter depend on the device.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.29.1.1
sqaIcmpJitterTestVrf
The name of VRF,this string length ranges from 1 to 32.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.132.29.1.2
sqaIcmpJitterTestDesIP
The destination IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.29.1.3
sqaIcmpJitterTestSorceIP
The Source IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.6000.132.29.1.4
sqaIcmpJitterTestRepeat
The number of repeat times,ranges from 1 to 65535(default:1).
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.6000.132.29.1.5
sqaIcmpJitterTestSize
The size of ICMP packet,ranges from 40 to 8192(default:40),unit:byte.
Unsigned32r/w
Constraints:
range: 40-8192
 .1.3.6.1.4.1.3902.3.6000.132.29.1.6
sqaIcmpJitterTestTos
The TOS value,ranges from 0 to 255(default:0),256 is the invalid value.
Unsigned32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.3902.3.6000.132.29.1.7
sqaIcmpJitterTestTtl
The TTL value,ranges from 1 to 255(default:255).
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.3.6000.132.29.1.8
sqaIcmpJitterTestInterval
The sending period of ICMP packets,ranges from 50 to 65535(default:100),unit:ms.
Unsigned32r/w
Constraints:
range: 50-65535
 .1.3.6.1.4.1.3902.3.6000.132.29.1.9
sqaIcmpJitterTestDscp
The DSCP value,ranges from 0 to 63,255 is the invalid value.
Unsigned32r/w
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.3902.3.6000.132.29.1.10
sqaIcmpJitterTestRowStatus
Row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.132.29.1.11