ZXR10-PTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

zxr10ptpIntfConfTable

table

.1.3.6.1.4.1.3902.3.101.10.4 · 1 row entry · 19 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpIntfConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpIntfConfTable'

A table containing PTP port configure
information.

zxr10ptpIntfConfEntry row .1.3.6.1.4.1.3902.3.101.10.4.1

Information of PTP port.

Indexes

zxr10PTPPortConfigName

Column Syntax OID

zxr10PTPPortIndexobsolete

Object which specifies a unique entry in the
Zxr10PtpIntfConfEntry.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.3902.3.101.10.4.1.1

zxr10PTPPortConfigName

The PTP port name.

SNMPv2-TCDisplayString

Constraints:
range: 1-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.4.1.2

zxr10PTPPortConfigEnable

Enable or disable a ptp port.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.101.10.4.1.4

zxr10PTPPortConfigState

The ptp port state configured by manual,
masterslave state only t8000\M6k support.

Enumeration

Enumerated Values:

6	master
7	passive
9	slave
10	masterslave
254	invalid

.1.3.6.1.4.1.3902.3.101.10.4.1.5

zxr10PTPPortConfigSyncInterval

The ptp sync interval,only upp3081 support.

Integer32

Constraints:
range: -8-1

.1.3.6.1.4.1.3902.3.101.10.4.1.6

zxr10PTPPortConfigDelayReqInterval

The ptp delay req interval,only upp3081 support.

Integer32

Constraints:
range: -5-5

.1.3.6.1.4.1.3902.3.101.10.4.1.7

zxr10PTPPortConfigMultiDomainEnable

The ptp port is multi domain port or not,
only upp3081 support.

Enumeration

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.3902.3.101.10.4.1.8

zxr10PTPPortConfigDelayMech

The delay mechanism of the ptp port,only upp3081 support.

Enumeration

Enumerated Values:

1	e2e
2	p2p

.1.3.6.1.4.1.3902.3.101.10.4.1.9

zxr10PTPPortNetProtocol

The port net protocol,only upp3081 support.

Enumeration

Enumerated Values:

1	ipv4
2	ipv6
3	ieee802

.1.3.6.1.4.1.3902.3.101.10.4.1.10

zxr10PTPPortPacketMechanism

The port packet mechanism.

Enumeration

Enumerated Values:

255

null

.1.3.6.1.4.1.3902.3.101.10.4.1.11

zxr10PTPShowPortState

The port state.

Enumeration

Enumerated Values:

1	initializing
2	faulty
3	disable
4	listening
5	premaster
6	master
7	passive
8	uncalibrated
9	slave
10	masterslave
254	invalid

.1.3.6.1.4.1.3902.3.101.10.4.1.12

zxr10PTPPortConfigTransEnableobsolete

Enable or disable the trans mode of a ptp port.

Enumeration

Enumerated Values:

255

null

.1.3.6.1.4.1.3902.3.101.10.4.1.13

zxr10PTPPortUnSymmetry

The unsymmetrical offset(ns),consider the effect of
the zxr10PTPPortUnSign node.t8000\M6k not support.

Unsigned32

Constraints:
range: 0-1000000000

.1.3.6.1.4.1.3902.3.101.10.4.1.14

zxr10PTPPortUnSign

The unsymmetrical offset sign,consider the effect of
the zxr10PTPPortUnSymmetry node.t8000\M6k not support.

Enumeration

Enumerated Values:

0	positive
1	negative

.1.3.6.1.4.1.3902.3.101.10.4.1.15

zxr10PTPPortVlanIdobsolete

Vlan id, only valid for t8000\M6k,
other projects maybe not support.

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.3902.3.101.10.4.1.16

zxr10PTPPortSourceName

The PTP source interface name.

SNMPv2-TCDisplayString

Constraints:
range: 1-32

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.4.1.17

zxr10PTPPortPDelayReqInterval

The ptp pdelay req interval,only upp3081 support.

Integer32

Constraints:
range: -4-4

.1.3.6.1.4.1.3902.3.101.10.4.1.18

zxr10PTPPortNum

The ptp port number,the value must be configured
when create a port.

Integer32

Constraints:
range: 1-3000

.1.3.6.1.4.1.3902.3.101.10.4.1.19

zxr10PTPPortConfigRowStatusobsolete

Create or delete ptp port.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.3902.3.101.10.4.1.100

zxr10ptpPortCfgTable

table obsolete

.1.3.6.1.4.1.3902.3.101.10.5 · 1 row entry · 21 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpPortCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpPortCfgTable'

A table containing PTP port configure
information.

zxr10ptpPortCfgEntry row .1.3.6.1.4.1.3902.3.101.10.5.1

Information of PTP port.

Indexes

zxr10ptpPortCfgIfName zxr10ptpPortCfgPortType

Column Syntax OID

zxr10ptpPortCfgIfNameobsolete

The PTP port name.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.5.1.1

zxr10ptpPortCfgPortTypeobsolete

The PTP port type,1 means combined-oc,
2 means general port.

Enumeration

Enumerated Values:

1	combinedOcPort
2	generalPort

.1.3.6.1.4.1.3902.3.101.10.5.1.2

zxr10ptpPortCfgPortNumobsolete

The ptp port number,the value must be configured
when create a port,1 means combined-oc.

Integer32r/w

Constraints:
range: 1-3000

.1.3.6.1.4.1.3902.3.101.10.5.1.3

zxr10ptpPortCfgEnableobsolete

Enable or disable a ptp port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.3.101.10.5.1.4

zxr10ptpPortCfgStateobsolete

The ptp port state configured by manual,
masterslave state only t8000 support.

Enumerationr/w

Enumerated Values:

6	master
7	passive
9	slave
10	masterslave

.1.3.6.1.4.1.3902.3.101.10.5.1.5

zxr10ptpPortCfgSyncIntervalobsolete

The ptp sync interval,for upp3081 the range is -8..1,
for 15k,the range is -4..1.

Integer32r/w

Constraints:
range: -8-1

.1.3.6.1.4.1.3902.3.101.10.5.1.6

zxr10ptpPortCfgDelayReqIntervalobsolete

The ptp delay req interval,for upp3081 the range is -5..5,
for 15k,the range is -4..5.

Integer32r/w

Constraints:
range: -5-5

.1.3.6.1.4.1.3902.3.101.10.5.1.7

zxr10ptpPortCfgMultiDomainEnableobsolete

The ptp port is multi domain port or not,
only upp3081 support.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.3.101.10.5.1.8

zxr10ptpPortCfgDelayMechobsolete

The delay mechanism of the ptp port,only upp3081 support.

Enumerationr/w

Enumerated Values:

1	e2e
2	p2p

.1.3.6.1.4.1.3902.3.101.10.5.1.9

zxr10ptpPortCfgNetProtocolobsolete

The port net protocol,only upp3081 and 15k support.

Enumerationr/w

Enumerated Values:

1	ipv4
2	ipv6
3	ieee802

.1.3.6.1.4.1.3902.3.101.10.5.1.10

zxr10ptpPortCfgTransmitModeobsolete

The port packet transmit mode,only 15k support.

Enumerationr/w

Enumerated Values:

1	unicast
2	multicast

.1.3.6.1.4.1.3902.3.101.10.5.1.11

zxr10ptpPortCfgUnSymmetryobsolete

The unsymmetrical offset(ns),consider the effect of
the zxr10PTPPortUnSign node.t8000 not support.

Unsigned32r/w

Constraints:
range: 0-1000000000

.1.3.6.1.4.1.3902.3.101.10.5.1.12

zxr10ptpPortCfgUnSignobsolete

The unsymmetrical offset sign,consider the effect of
the zxr10PTPPortUnSymmetry node.t8000 not support.

Enumerationr/w

Enumerated Values:

1	negative
2	positive

.1.3.6.1.4.1.3902.3.101.10.5.1.13

zxr10ptpPortCfgVlanIdobsolete

Vlan id, only valid for 15k,other projects maybe not support

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.3902.3.101.10.5.1.14

zxr10ptpPortCfgSourceNameobsolete

The PTP source interface name.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.5.1.15

zxr10ptpPortCfgPDelayReqIntervalobsolete

The ptp pdelay req interval,only upp3081 and 15k support.

Integer32r/w

Constraints:
range: -4-4

.1.3.6.1.4.1.3902.3.101.10.5.1.16

zxr10ptpPortCfgPktStatisticobsolete

packet statistic switch.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.3.101.10.5.1.17

zxr10ptpPortCfgWorkModeobsolete

The ptp port work mode.

Enumerationr/w

Enumerated Values:

1	fixedMode
2	freeMode

.1.3.6.1.4.1.3902.3.101.10.5.1.18

zxr10ptpPortCfgVlanPriorityobsolete

Vlan priority

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.3902.3.101.10.5.1.19

zxr10ptpPortCfgUniNegoDuraobsolete

Unicast negotiation duration of the port.

Integer32r/w

Constraints:
range: 60-1000

.1.3.6.1.4.1.3902.3.101.10.5.1.20

zxr10ptpPortCfgRowStatusobsolete

Create or delete ptp port,must config port number.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.101.10.5.1.100

zxr10ptpEthPortTable

table

.1.3.6.1.4.1.3902.3.101.10.6 · 1 row entry · 5 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpEthPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpEthPortTable'

A table containing PTP port configure
information.

zxr10ptpEthPortEntry row .1.3.6.1.4.1.3902.3.101.10.6.1

Information about the PTP ethernet port.

Indexes

zxr10PTPEthPortName

Column Syntax OID

zxr10PTPEthPortName

The PTP ethernet port name.

SNMPv2-TCDisplayString

Constraints:
range: 1-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.6.1.1

zxr10PTPEthPortConfigEnable

Enable or disable a ptp ethernet port.

Enumerationr/w

Enumerated Values:

1	enable
2	discard
3	disable

.1.3.6.1.4.1.3902.3.101.10.6.1.2

zxr10PTPEthPortUnSymmetry

The unsymmetrical offset.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.3.101.10.6.1.3

zxr10PTPEthPortUnSign

The unsymmetrical offset sign.

Enumerationr/w

Enumerated Values:

1	negative
2	positive

.1.3.6.1.4.1.3902.3.101.10.6.1.4

zxr10PTPEthPortRowStatusobsolete

Create or delete a ptp ethernet port.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.101.10.6.1.100

zxr10ptpDstIpConfTable

table obsolete

.1.3.6.1.4.1.3902.3.101.10.7 · 1 row entry · 7 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpDstIpConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpDstIpConfTable'

A table containing PTP port dest ip configure
information.

zxr10ptpDstIpConfEntry row .1.3.6.1.4.1.3902.3.101.10.7.1

Information about the PTP interface destination IP.

Indexes

zxr10PTPDestIpPortName zxr10PTPDestIpPortType zxr10PTPDestIpIndex

Column Syntax OID

zxr10PTPDestIpPortNameobsolete

The PTP port name.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.7.1.1

zxr10PTPDestIpPortTypeobsolete

The PTP port type,1 means combined-oc,2 means oc,bc,tc.

Enumeration

Enumerated Values:

1	combinedOcPort
2	generalPort

.1.3.6.1.4.1.3902.3.101.10.7.1.2

zxr10PTPDestIpIndexobsolete

The port destination IP address.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.3.101.10.7.1.3

zxr10PTPDestIpPortNumobsolete

The PTP port number,1 means combined-oc.

Integer32

Constraints:
range: 1-3000

.1.3.6.1.4.1.3902.3.101.10.7.1.4

zxr10PTPDestIpAlternatePriority1obsolete

Set priority1 of accept master IP.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.3.101.10.7.1.5

zxr10PTPDestIpPortModeobsolete

Set the port mode of PTP.

Enumerationr/w

Enumerated Values:

1	fixedmode
2	freemode

.1.3.6.1.4.1.3902.3.101.10.7.1.6

zxr10PTPDestIpRowStatusobsolete

Create or delete ptp accept master IP.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.101.10.7.1.100

zxr10ptpIpListConfTable

table

.1.3.6.1.4.1.3902.3.101.10.8 · 1 row entry · 2 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpIpListConfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpIpListConfTable'

A table containing PTP ACL IP information.

zxr10ptpIpListConfEntry row .1.3.6.1.4.1.3902.3.101.10.8.1

Information about PTP ACL IP configure.

Indexes

zxr10PTPIpListConfig

Column Syntax OID

zxr10PTPIpListConfig

The Acl IP address.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.3.101.10.8.1.1

zxr10PTPIpListRowStatusobsolete

Create or delete acl IP.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.101.10.8.1.100

zxr10ptpTimeSrcCfgTable

table

.1.3.6.1.4.1.3902.3.101.10.9 · 1 row entry · 4 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpTimeSrcCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpTimeSrcCfgTable'

A table containing PTP time source information.

zxr10ptpTimeSrcCfgEntry row .1.3.6.1.4.1.3902.3.101.10.9.1

Information about PTP time source configure of PTP.

Indexes

zxr10PTPTimeSrcCfgIfname

Column Syntax OID

zxr10PTPTimeSrcCfgIfname

The time source ifname, eg: gps or bits.

SNMPv2-TCDisplayString

Constraints:
range: 1-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.9.1.1

zxr10PTPTimeSrcCfgPri1

The time source priority1.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.3.101.10.9.1.2

zxr10PTPTimeSrcCfgPri2

The time source priority2.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.3.101.10.9.1.3

zxr10PTPTimeSrcCfgRowStatusobsolete

Create or delete time source.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.3.101.10.9.1.100

zxr10ptpPortShowTable

table

.1.3.6.1.4.1.3902.3.101.10.11 · 1 row entry · 4 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpPortShowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpPortShowTable'

A table containing PTP port state
information.

zxr10ptpPortShowEntry row .1.3.6.1.4.1.3902.3.101.10.11.1

Information of PTP port.

Indexes

zxr10ptpPortShowIfName zxr10ptpPortShowPortType

Column Syntax OID

zxr10ptpPortShowIfName

The PTP port name.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.11.1.1

zxr10ptpPortShowPortType

The PTP port type,1 means combined-oc,0 means not.

Enumeration

Enumerated Values:

1	combinedOcPort
2	generalPort

.1.3.6.1.4.1.3902.3.101.10.11.1.2

zxr10ptpPortShowPortNum

The ptp port number,the value must be configured
when create a port,1 means combined-oc.

Integer32

Constraints:
range: 1-3000

.1.3.6.1.4.1.3902.3.101.10.11.1.3

zxr10ptpPortShowPortState

The port state.

Enumeration

Enumerated Values:

1	initializing
2	faulty
3	disable
4	listening
5	premaster
6	master
7	passive
8	uncalibrated
9	slave
10	masterslave
254	invalid

.1.3.6.1.4.1.3902.3.101.10.11.1.4

zxr10ptpPortTable

table

.1.3.6.1.4.1.3902.3.101.10.12 · 1 row entry · 21 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpPortTable'

A table containing PTP port configure
information.

zxr10ptpPortEntry row .1.3.6.1.4.1.3902.3.101.10.12.1

Information of PTP port.

Indexes

zxr10ptpPortIfName zxr10ptpPortType zxr10ptpPortIndexVlanid

Column Syntax OID

zxr10ptpPortIfName

The PTP port name.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.12.1.1

zxr10ptpPortType

The PTP port type,1 means combined-oc,
2 means general port.

Enumeration

Enumerated Values:

1	combinedOcPort
2	generalPort

.1.3.6.1.4.1.3902.3.101.10.12.1.2

zxr10ptpPortIndexVlanid

The ptp port vlan ID.

Unsigned32

Constraints:
range: 0-4094

.1.3.6.1.4.1.3902.3.101.10.12.1.3

zxr10ptpPortNum

The ptp port number,the value must be configured
when create a port,1 means combined-oc.

Integer32r/w

Constraints:
range: 1-3000

.1.3.6.1.4.1.3902.3.101.10.12.1.4

zxr10ptpPortEnable

Enable or disable a ptp port.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.3.101.10.12.1.5

zxr10ptpPortState

The ptp port state configured by manual,
masterslave state only t8000\M6k support.

Enumerationr/w

Enumerated Values:

6	master
7	passive
9	slave
10	masterslave
254	invalid

.1.3.6.1.4.1.3902.3.101.10.12.1.6

zxr10ptpPortSyncInterval

The ptp sync interval,for upp3081 the range is -8..1,
for 15k,the range is -4..1.

Integer32

Constraints:
range: -8-1

.1.3.6.1.4.1.3902.3.101.10.12.1.7

zxr10ptpPortDelayReqInterval

The ptp delay req interval,for upp3081 the range is -5..5,
for 15k,the range is -4..5.

Integer32

Constraints:
range: -5-5

.1.3.6.1.4.1.3902.3.101.10.12.1.8

zxr10ptpPortMultiDomainEnable

The ptp port is multi domain port or not,
only upp3081 support.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.3.101.10.12.1.9

zxr10ptpPortDelayMech

The delay mechanism of the ptp port,only upp3081 support.

Enumeration

Enumerated Values:

1	e2e
2	p2p

.1.3.6.1.4.1.3902.3.101.10.12.1.10

zxr10ptpPortNetProtocol

The port net protocol,only upp3081 and 15k support.

Enumeration

Enumerated Values:

1	ipv4
2	ipv6
3	ieee802

.1.3.6.1.4.1.3902.3.101.10.12.1.11

zxr10ptpPortTransmitMode

The port packet transmit mode,only 15k support.

Enumeration

Enumerated Values:

1	unicast
2	multicast

.1.3.6.1.4.1.3902.3.101.10.12.1.12

zxr10ptpPortUnSymmetry

The unsymmetrical offset(ns),consider the effect of
the zxr10PTPPortUnSign node.t8000\M6k not support.

Unsigned32

Constraints:
range: 0-1000000000

.1.3.6.1.4.1.3902.3.101.10.12.1.13

zxr10ptpPortUnSign

The unsymmetrical offset sign,consider the effect of
the zxr10PTPPortUnSymmetry node.t8000\M6k not support.

Enumeration

Enumerated Values:

1	negative
2	positive

.1.3.6.1.4.1.3902.3.101.10.12.1.14

zxr10ptpPortVlanId

Vlan id, only valid for 15k,other projects maybe not support

Integer32

Constraints:
range: 0-4094

.1.3.6.1.4.1.3902.3.101.10.12.1.15

zxr10ptpPortSourceName

The PTP source interface name.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.12.1.16

zxr10ptpPortPDelayReqInterval

The ptp pdelay req interval,only upp3081 and 15k support.

Integer32

Constraints:
range: -4-4

.1.3.6.1.4.1.3902.3.101.10.12.1.17

zxr10ptpPortPktStatistic

packet statistic switch.

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.3.101.10.12.1.18

zxr10ptpPortWorkMode

The ptp port work mode.

Enumeration

Enumerated Values:

1	fixedMode
2	freeMode

.1.3.6.1.4.1.3902.3.101.10.12.1.19

zxr10ptpPortVlanPriority

Vlan priority

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.3902.3.101.10.12.1.20

zxr10ptpPortUniNegoDura

Unicast negotiation duration of the port.

Integer32

Constraints:
range: 60-1000

.1.3.6.1.4.1.3902.3.101.10.12.1.21

zxr10ptpAcceptDstIpTable

table

.1.3.6.1.4.1.3902.3.101.10.13 · 1 row entry · 7 columns

Open in standard view

Uses the zte-ng variant from /opt/observium/mibs/zte-ng.

Command help

Walk zxr10ptpAcceptDstIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-PTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-PTP-MIB::zxr10ptpAcceptDstIpTable'

A table containing PTP port dest ip configure
information.

zxr10ptpAcceptDstIpEntry row .1.3.6.1.4.1.3902.3.101.10.13.1

Information about the PTP interface destination IP.

Indexes

zxr10PTPAcceptDestIpPortName zxr10PTPAcceptDestIpPortType zxr10PTPAcceptDestIpIndex zxr10ptpAcceptDestIpVlanid

Column Syntax OID

zxr10PTPAcceptDestIpPortName

The PTP port name.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3902.3.101.10.13.1.1

zxr10PTPAcceptDestIpPortType

The PTP port type,1 means combined-oc,2 means oc,bc,tc.

Enumeration

Enumerated Values: