ZXR10-MSTP-MIB

        ZXROSNG 30R2 MSTP MIB
    
Source file
ZXR10-MSTP-MIB
Last revised
Identity
mstpMIB
Base OID
1.3.6.1.4.1.3902.3.127
Imported Objects
RFC1213-MIB ifIndex
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page)
ZXR10-SMI zxr10
Net-SNMP examples using the zte-ng MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZXR10-MSTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZXR10-MSTP-MIB::mstpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MSTP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MSTP-MIB::mstpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (54)
.1.3.6.1.4.1.3902.3.127
.1.3.6.1.4.1.3902.3.127.1
.1.3.6.1.4.1.3902.3.127.1.1
.1.3.6.1.4.1.3902.3.127.1.1.1
.1.3.6.1.4.1.3902.3.127.1.1.10
.1.3.6.1.4.1.3902.3.127.1.1.11
.1.3.6.1.4.1.3902.3.127.1.1.12
.1.3.6.1.4.1.3902.3.127.1.1.13
.1.3.6.1.4.1.3902.3.127.1.1.14
.1.3.6.1.4.1.3902.3.127.1.1.15
.1.3.6.1.4.1.3902.3.127.1.1.16
.1.3.6.1.4.1.3902.3.127.1.1.2
.1.3.6.1.4.1.3902.3.127.1.1.3
.1.3.6.1.4.1.3902.3.127.1.1.4
.1.3.6.1.4.1.3902.3.127.1.1.5
.1.3.6.1.4.1.3902.3.127.1.1.6
.1.3.6.1.4.1.3902.3.127.1.1.7
.1.3.6.1.4.1.3902.3.127.1.1.8
.1.3.6.1.4.1.3902.3.127.1.1.9
.1.3.6.1.4.1.3902.3.127.1.2
.1.3.6.1.4.1.3902.3.127.1.2.1
.1.3.6.1.4.1.3902.3.127.1.2.1.1
.1.3.6.1.4.1.3902.3.127.1.2.1.1.1
.1.3.6.1.4.1.3902.3.127.1.2.1.1.2
.1.3.6.1.4.1.3902.3.127.1.2.1.1.3
.1.3.6.1.4.1.3902.3.127.1.2.1.1.4
.1.3.6.1.4.1.3902.3.127.1.2.1.1.5
.1.3.6.1.4.1.3902.3.127.1.2.1.1.6
.1.3.6.1.4.1.3902.3.127.1.2.1.1.7
.1.3.6.1.4.1.3902.3.127.1.2.1.1.8
.1.3.6.1.4.1.3902.3.127.1.2.1.1.9
.1.3.6.1.4.1.3902.3.127.1.3
.1.3.6.1.4.1.3902.3.127.1.3.1
.1.3.6.1.4.1.3902.3.127.1.3.1.1
.1.3.6.1.4.1.3902.3.127.1.3.1.1.1
.1.3.6.1.4.1.3902.3.127.1.3.1.1.2
.1.3.6.1.4.1.3902.3.127.1.3.1.1.3
.1.3.6.1.4.1.3902.3.127.1.3.1.1.4
.1.3.6.1.4.1.3902.3.127.1.3.1.1.5
.1.3.6.1.4.1.3902.3.127.1.3.1.1.6
.1.3.6.1.4.1.3902.3.127.1.4
.1.3.6.1.4.1.3902.3.127.1.4.1
.1.3.6.1.4.1.3902.3.127.1.4.1.1
.1.3.6.1.4.1.3902.3.127.1.4.1.1.1
.1.3.6.1.4.1.3902.3.127.1.4.1.1.10
.1.3.6.1.4.1.3902.3.127.1.4.1.1.11
.1.3.6.1.4.1.3902.3.127.1.4.1.1.2
.1.3.6.1.4.1.3902.3.127.1.4.1.1.3
.1.3.6.1.4.1.3902.3.127.1.4.1.1.4
.1.3.6.1.4.1.3902.3.127.1.4.1.1.5
.1.3.6.1.4.1.3902.3.127.1.4.1.1.6
.1.3.6.1.4.1.3902.3.127.1.4.1.1.7
.1.3.6.1.4.1.3902.3.127.1.4.1.1.8
.1.3.6.1.4.1.3902.3.127.1.4.1.1.9
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. RFC-1212rfc
  5. RFC1155-SMIrfc
  6. RFC1213-MIBrfc
  7. ZXR10-SMIzte-ng
  8. ZXR10-MSTP-MIBzte-ngselected
Type Definitions (13)
OctetString
Enumeration
bpduguarddisable(0)
bpduguardenable(1)
BPDU Guard Function
Enumeration
edge-disable(0)
edge-enable(1)
Whether Edge Port
Enumeration
share(0)
p2p(1)
auto(2)
Link Type
Enumeration
loopguarddisable(0)
loopguardenable(1)
Loop Guard Function
Enumeration
ieee(0)
cisco(1)
hammer(2)
huawei(3)
Packet Type
Enumeration
portstpunused(0)
portstpused(1)
Whether Stp Run in Port
Enumeration
disabled(0)
blocking(1)
listening(2)
learning(3)
forwarding(4)
broken(5)
Port Status
Enumeration
disabled(0)
enabled(1)
Whether Stp Run in Switch
Enumeration
sstp(1)
rstp(2)
mstp(3)
Spanning Tree Protocol Type
Enumeration
rootguarddisable(0)
rootguardenable(1)
Root Guard Function
Enumeration
untransparent(0)
transparent(1)
Data Packets Transport Type
Unsigned32