ZXR10-MPLS-TE-FRR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
56

mplsFrrFacilityIfTable

table
.1.3.6.1.4.1.3902.3.316.1.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk mplsFrrFacilityIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-TE-FRR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-TE-FRR-MIB::mplsFrrFacilityIfTable' 
The mplsFrrFacilityInfTable provides information about the interface as specified 
by mplsFrrFacilityProtectedIfIndex.  Each entry belongs to a protected 
 interface, including statistical attributes of this interface.
mplsFrrFacilityIfEntry row .1.3.6.1.4.1.3902.3.316.1.2.1.1
An entry in the mplsFrrFacilityInfTable represents the statistical attributes
of a FRR-configured interface.
Indexes
Column Syntax OID
mplsFrrFacilityConfigIfIndex
Uniquely identifies the interface configured for FRR
protection. If this object is set to 0, this indicates
that the remaining indexing combinations for this row
apply to all interfaces on this device for which
the F…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.2.1.1.1
mplsFrrFacilityDBNumProtectingTunnelOnIf
The number of backup tunnels protecting the
interface specified by mplsFrrFacilityProtectedIfIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.2.1.1.2
mplsFrrFacilityDBNumProtectedLspOnIf
The number of LSPs currently being protected on
the interface specified by
mplsFrrFacilityProtectedIfIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.2.1.1.3
mplsFrrFacilityDBNumProtectedTunnels
The number of tunnels protected on the interface
specified by mplsFrrFacilityProtectedIfIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.2.1.1.4
mplsFrrFacilityProtectingTunnelIndex
Uniquely identifies the mplsTunnelEntry primary index for
the tunnel head interface designated to protect the
interface as specified in the mplsFrrFacilityProtectedIfIndex
(and all of the tunnels using this interface). …
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.316.1.2.1.1.5
mplsFrrFacilityConfigIfName
The name of interface configured for FRR
protection.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.316.1.2.1.1.8

mplsFrrFacilityDBTable

table
.1.3.6.1.4.1.3902.3.316.1.2.2 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk mplsFrrFacilityDBTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-TE-FRR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-TE-FRR-MIB::mplsFrrFacilityDBTable' 
The mplsFrrFacilityDBTable provides summary information about the
fast reroute database which indicates information of primary LSPs protected by the LSP 
as specified by mplsFrrFacilityProtectingTunnelIndex on the protected interface.
mplsFrrFacilityDBEntry row .1.3.6.1.4.1.3902.3.316.1.2.2.1
An entry in the mplsFrrFacilityDBTable represents a single
protected LSP, protected by a backup tunnel on a
specific protected interface.
Indexes
Column Syntax OID
mplsFrrFacilityProtectedIfIndex
Uniquely identifies the interface configured for FRR
protection. If this object is set to 0, this indicates
that the remaining indexing combinations for this row
apply to all interfaces on this device for which
the F…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.2.2.1.1
mplsFrrFacilityPrimaryTunnelIndex
Uniquely identifies the mplsTunnelEntry primary index for
the TE tunnel LSP being protected on the
interface as specified by mplsFrrFacilityProtectedIfIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.2.2.1.2
mplsFrrFacilityPrimaryTunnelIngressLSRId
Uniquely identifies the mplsTunnelEntry third index
for the TE tunnel LSP being protected on the
interface as specified by mplsFrrFacilityProtectedIfIndex.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.2.2.1.3
mplsFrrFacilityPrimaryTunnelEgressLSRId
Uniquely identifies the mplsTunnelEntry fourth index
for the TE tunnel LSP being protected on the
interface as specified by mplsFrrFacilityProtectedIfIndex.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.2.2.1.4
mplsFrrFacilityPrimaryTunnelInstance
Uniquely identifies the mplsTunnelEntry secondary index
for the TE tunnel LSP being protected on the
interface as specified by mplsFrrFacilityProtectedIfIndex.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.2.2.1.5
mplsFrrFacilityProtectingTunIdx
Uniquely identifies the mplsTunnelEntry primary index for
the tunnel head interface designated to protect the
interface as specified in the mplsFrrFacilityProtectedIfIndex
(and all of the tunnels using this interface). …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.2.2.1.6
mplsFrrFacilityProtectedIfName
The name of interface configured for FRR
protection.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.316.1.2.2.1.7
mplsFrrFacilityProtectingTunnelStatus
Specifies the state of the protecting tunnel as
specified by mplsFrrFacilityProtectingTunnelIndex.

active This tunnel's label has been placed in the
LFIB and is ready to be applied to incoming
…
Enumeration
Enumerated Values:
0partial
1ready
2active
 .1.3.6.1.4.1.3902.3.316.1.2.2.1.8

mplsFrrHelloStatusTable

table
.1.3.6.1.4.1.3902.3.316.1.3.1 · 1 row entry · 12 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk mplsFrrHelloStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-TE-FRR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-TE-FRR-MIB::mplsFrrHelloStatusTable' 
The mplsFrrHelloStatusTable provides information about the
hello status database.
mplsFrrHelloStatusEntry row .1.3.6.1.4.1.3902.3.316.1.3.1.1
An entry in the mplsFrrHelloStatusTable represents a single
hello enabled interface on local node for timely neighbor failure detection.
Indexes
Column Syntax OID
mplsFrrHelloEnabledIfIndex
Uniquely identifies the hello enabled interface on the local node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.1
mplsFrrHelloLocalAddress
Uniquely identifies the local address on which hello enabled interfaces are
configured for neighbor failure detection.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.2
mplsFrrHelloNeighborAddress
Uniquely identifies the neighboring address whose status is being tracked.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.3
mplsFrrHelloNeighborState
Specifies the state of neighbor node as specified by
mplsFrrHelloNeighborLSRID.
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.4
mplsFrrHelloType
Indicates the way the hello enabled interface processes hello
messages.

active(1) : initiate to detect the state of neighbor with hello
request message.
passive(2) : receives and processes hello…
Enumeration
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.5
mplsFrrHelloSrcInstance
Represents the sender's instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.6
mplsFrrHelloDstInstance
The most recently received Src_Instance value as specified by
mplsFrrHelloSrcInstance received from the neighbor.
This field MUST be set to zero (0) when no value has ever been seen
from the neighbor.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.7
mplsFrrHelloRefreshIntervalobsolete
Represents the periodicity in which hello message is issued.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.8
mplsFrrHelloNumRefreshMissesobsolete
Represents the allowed max miss number of hello instances after which
the node treat the neighbor communication has been lost.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.9
mplsFrrHelloNumLosses
Represents the lost count of hello instances.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.10
mplsFrrHelloNumProtectedLsps
Represents the number of protected LSPs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.11
mplsFrrHelloEnabledIfName
Hello enabled interface name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.316.1.3.1.1.12

mplsFrrHelloConfigTable

table obsolete
.1.3.6.1.4.1.3902.3.316.1.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk mplsFrrHelloConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-TE-FRR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-TE-FRR-MIB::mplsFrrHelloConfigTable' 
The mplsFrrHelloConfigTable provides information about the
hello configuration info on interfaces.
mplsFrrHelloConfigEntry row .1.3.6.1.4.1.3902.3.316.1.3.2.1
An entry in the mplsFrrHelloConfigTable represents a single
hello configuration info of hello enabled interface.
Indexes
Column Syntax OID
mplsFrrHelloConfigIfIndexobsolete
The index of interface which enables FRR hello.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.2.1.1
mplsFrrHelloConfigRefreshIntervalobsolete
FRR Hello refresh interval on this interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.2.1.2
mplsFrrHelloConfigRefreshMissesobsolete
FRR Hello refresh misses on this interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.3.2.1.3
mplsFrrHelloConfigIfNameobsolete
The name of interface which enables FRR hello.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.316.1.3.2.1.4

mplsFrrDetourDBTable

table
.1.3.6.1.4.1.3902.3.316.1.4.1 · 1 row entry · 15 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk mplsFrrDetourDBTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-TE-FRR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-TE-FRR-MIB::mplsFrrDetourDBTable' 
The mplsFrrDetourDBTable provides summary information about the
fast reroute database which indicates information of tunnels 
		 protected by detour LSP.
          		 
		 The entries of this table are present in PLR nodes of the detour LSP.
mplsFrrDetourDBEntry row .1.3.6.1.4.1.3902.3.316.1.4.1.1
An entry in the mplsFrrDetourDBEntry represents a single
protected LSP, protected by a detour lsp.
Indexes
Column Syntax OID
mplsFrrDetourTunnelIndex
Uniquely identifies the mplsTunnelEntry index for the TE tunnel
LSP being protected by detour Lsp with the same tunnel index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.1
mplsFrrDetourTunnelInstance
Uniquely identifies the mplsTunnelEntry secondary index
for the TE tunnel LSP being protected by detour Lsp with the
same tunnel instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.2
mplsFrrDetourTunnelIngressLSRId
Uniquely identifies the mplsTunnelEntry third index
for the TE tunnel LSP being protected by detour Lsp.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.3
mplsFrrDetourTunnelEgressLSRId
Uniquely identifies the mplsTunnelEntry fourth index
for the TE tunnel LSP being protected by detour Lsp.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.4
mplsFrrDetourPrimaryLspInIntf
Indicates the index of in interface of primary lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.5
mplsFrrDetourPrimaryLspInLable
Indicates the in lable of primary lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.6
mplsFrrDetourPrimaryLspOutIntf
Indicates the index of out interface of primary lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.7
mplsFrrDetourPrimaryLspOutLable
Indicates the out lable of primary lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.8
mplsFrrDetourBackupLspInLable
Indicates the in lable of detour lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.9
mplsFrrDetourBackupLspInIntf
Indicates the index of in interface of detour lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.10
mplsFrrDetourBackupLspOutLable
Indicates the out lable of detour lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.11
mplsFrrDetourBackupLspOutIntf
Indicates the index of out interface of detour lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.12
mplsFrrDetourBackupLspNextHop
Indicates the next hop address of detour Lsp .
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.13
mplsFrrDetourProtectingLspStatus
Specifies the state of the detour lsp.

active This lsp's label has been placed in the
LFIB and is ready to be applied to incoming
packets.

ready - This lsp's label entry…
Enumeration
Enumerated Values:
1ready
2active
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.14
mplsFrrDetourProtecttype
This object indicates the protection type provided by detour lsp.

node The detour lsp is NNHop protection.

link The detour lsp id NHop protection.
Enumeration
Enumerated Values:
1node
2link
 .1.3.6.1.4.1.3902.3.316.1.4.1.1.15

mplsFrrDetourLspTable

table
.1.3.6.1.4.1.3902.3.316.1.4.2 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk mplsFrrDetourLspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-TE-FRR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-TE-FRR-MIB::mplsFrrDetourLspTable' 
The mplsFrrDetourLspTable provides summary information about the
detour LSP.
          		 
		 The entries of this table are present in all LSRs on the path
of the detour LSP.
mplsFrrDetourLspEntry row .1.3.6.1.4.1.3902.3.316.1.4.2.1
An entry in this table represents a detour. An entry in this
table is only created by an SNMP agent as instructed by an MPLS
signaling protocol.
Indexes
Column Syntax OID
mplsFrrDetourLspIndex
Uniquely identifies the mplsTunnelEntry index for the detour Lsp
which is the same as th TE tunnel LSP being protected.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.1
mplsFrrDetourLspInstance
Uniquely identifies the mplsTunnelEntry secondary index for the
detour Lsp which is the same as th TE tunnel LSP being protected.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.2
mplsFrrDetourLspIngressLSRId
Uniquely identifies the mplsTunnelEntry third index for the
detour Lsp which is the same as th TE tunnel LSP being protected.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.3
mplsFrrDetourLspEgressLSRId
Uniquely identifies the mplsTunnelEntry fourth index for the
detour Lsp which is the same as th TE tunnel LSP being protected.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.4
mplsFrrDetourLspInInterface
Indicates the index of in interface of the detour lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.5
mplsFrrDetourLspOutInterface
Indicates the index of out interface of the detour lsp on this node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.6
mplsFrrDetourLspType
This object indicates the lsp type.

plrlsp The detour lsp originated from this node.

dtrLsp The detour lsp through this node.
Enumeration
Enumerated Values:
1plrlsp
2dtrLsp
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.7
mplsFrrDetourMergeType
This value represents whether or not this detour is merged.

notmerged This detour is not merged.

mergedwithdtr-lsp This detour is merged into another detour protecting
the same…
Enumeration
Enumerated Values:
0notmerged
1mergedwithdtr-lsp
2mergedwithmain
3mergelsp
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.8
mplsFrrDetourLspPLRLSRId
The IP address of the PLR which has initiated the detour LSP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.9
mplsFrrDetourLspAviodLSRId
The IP address of the node that this PLR tries to avoid.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.10
mplsFrrDetourLspBandwidth
The maximum bandwidth specifically reserved for the detour
LSP, in units of thousands of bits per second (Kbps).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.316.1.4.2.1.11