ZXR10-MPLS-LDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
16
Rows
16
Columns
100
.1.3.6.1.4.1.3902.3.314.1.6 · 1 row entry · 17 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpFecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpFecTable'
Fec Table. This table contains
one entry per fec table.
zxr10LdpFecEntry row .1.3.6.1.4.1.3902.3.314.1.6.1
The parameter of a fec entity containing statistics
information about a particular LDP FEC.
Column Syntax OID
The index which uniquely identifies this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.6.1.1
The type of this LDP FEC. If the value of this object
is 'indirect (0)' then the FEC type described by this
row is for address prefixes and not included in local
address list. If the value of this object is 'direct
(1…
Enumeration
Enumerated Values:
0indirect
1direct
2me
3invalid
.1.3.6.1.4.1.3902.3.314.1.6.1.2
The value of this object is the type of the
Internet address. The value of this object,
decides how the value of the zxr10LdpFecAddr object
is interpreted.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.3902.3.314.1.6.1.3
LDP FEC address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.3.314.1.6.1.4
The LDP FEC length (in bits).
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.3902.3.314.1.6.1.5
The state of this LDP FEC. If the FEC exists with the
local popular tag and the outgoing label then the value
of this object is 'ok(1)'. If the FEC exists with the
local explicit or implicit null tag then the value o…
Enumeration
Enumerated Values:
1ok
2egress
3noOutLabel
4noInLabel
.1.3.6.1.4.1.3902.3.314.1.6.1.6
The number of octets of traffic originated on
this box, forwarded over the current LDP FEC. The
number reported is not realtime and may be subject
to several minutes delay. The delay is controllable
by ldp statistic…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.3902.3.314.1.6.1.7
The number of packets of traffic originated on
this box, forwarded over the current LDP FEC. The
number reported is not realtime and may be subject
to several minutes delay. The delay is controllable
by ldp statisti…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.3902.3.314.1.6.1.8
The number of octets of traffic destined to this FEC,
originated on a different box, forwarded over the
current LDP FEC. The number reported is not realtime
and may be subject to several minutes delay. The delay
is …
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.3902.3.314.1.6.1.9
The number of packets of traffic destined to this FEC,
originated on a different box, forwarded over the
current LDP FEC. The number reported is not realtime
and may be subject to several minutes delay. The delay
is…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.3902.3.314.1.6.1.10
The value of sysUpTime at the time of the most recent
change in state of LSP about FEC from down to up.
If no such changes have occurred since the last
re-initialization of the local management subsystem,
then this obj…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.3902.3.314.1.6.1.11
The value of sysUpTime at the time of the most recent
change in state of LSP about FEC from up to down.
If no such changes have occurred since the last
re-initialization of the local management subsystem,
then this obj…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.3902.3.314.1.6.1.12
The reason why the LSP went down about the most recent
change in state of LSP from up to down.
Can be one of the following:
the topology changed, the neighbor withdrew the label,
the neighbor went down, the filter ch…
Enumeration
Enumerated Values:
0null
1topologyChanged
2receivedWithdrawl
3neighborDown
4filterChanged
5bfdSessionDown
6unknown
.1.3.6.1.4.1.3902.3.314.1.6.1.13
The number of octets of traffic lost on
this box, forwarded over the current LDP FEC. The
number reported is not realtime and may be subject
to several minutes delay. The delay is controllable
by ldp statistics gath…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.3902.3.314.1.6.1.14
The number of packets of traffic lost on
this box, forwarded over the current LDP FEC. The
number reported is not realtime and may be subject
to several minutes delay. The delay is controllable
by ldp statistics gat…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.3902.3.314.1.6.1.15
The number of lost octets of traffic destined to this FEC,
originated on a different box, forwarded over the
current LDP FEC. The number reported is not realtime
and may be subject to several minutes delay. The delay…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.3902.3.314.1.6.1.16
The number of lost packets of traffic destined to this FEC,
originated on a different box, forwarded over the
current LDP FEC. The number reported is not realtime
and may be subject to several minutes delay. The dela…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.3902.3.314.1.6.1.17
.1.3.6.1.4.1.3902.3.314.1.7 · 1 row entry · 10 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpBfdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpBfdTable'
Bfd Table. This table contains
one entry per bfd table.
zxr10LdpBfdEntry row .1.3.6.1.4.1.3902.3.314.1.7.1
The parameter of a bfd entity.
Column Syntax OID
The value of this object is the type of the
Internet address. The value of this object,
decides how the value of the zxr10LdpBfdDstAddr
object is interpreted.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.3902.3.314.1.7.1.1
The address about FEC related to BFD.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.3.314.1.7.1.2
The mask length of the FEC related to BFD.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.3902.3.314.1.7.1.3
The time span that two control package is send.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.7.1.4
The time span that two control package is received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.7.1.5
If this parameter multiply zxr10LdpBfdMinRxInterval
a control message is no received it means the lsp has
some problem.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.7.1.6
A fec needs bfd protection.
Enumeration
Enumerated Values:
0false
1true
.1.3.6.1.4.1.3902.3.314.1.7.1.7
If the bfd is up.
Enumeration
Enumerated Values:
0false
1true
.1.3.6.1.4.1.3902.3.314.1.7.1.8
The source address specified with package of LSP PING.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.3.314.1.7.1.9
FRR or ECMP protect bind flag.
If the value is 1,then not support protect bind.
If the value is 2,then support protect bind.
Enumeration
Enumerated Values:
1false
2true
.1.3.6.1.4.1.3902.3.314.1.7.1.10
.1.3.6.1.4.1.3902.3.314.1.8 · 1 row entry · 8 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpGrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpGrTable'
GR Table. This table contains
one entry per GR table.
zxr10LdpGrEntry row .1.3.6.1.4.1.3902.3.314.1.8.1
The parameter of a GR entity about session.
Column Syntax OID
The identifier of local lsr used to identify a session relating GR.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
.1.3.6.1.4.1.3902.3.314.1.8.1.1
The identifier of peer lsr used to identify a session relating GR.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
.1.3.6.1.4.1.3902.3.314.1.8.1.2
If the session supports GR.
Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.3902.3.314.1.8.1.3
The max time(seconds) of the lsr can wait to reconnect
with peer lsr in GR process.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.8.1.4
The max time(seconds) of the session mapping the label from the peer lsr
after reconnect with peer lsr in GR process.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.8.1.5
If the session is in GR process.
Enumeration
Enumerated Values:
0false
1true
.1.3.6.1.4.1.3902.3.314.1.8.1.6
Indicates the status of the GR session.
Enumeration
Enumerated Values:
0normal
1reconnect
2recovery
.1.3.6.1.4.1.3902.3.314.1.8.1.7
The remaining time(seconds) of waiting for session reconnection
and recovering in GR process. If the value of zxr10LdpSessIsInGr
is false, then the value of this object is zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.8.1.8
.1.3.6.1.4.1.3902.3.314.1.9 · 1 row entry · 8 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpInterfaceTable'
Interface Table. This table contains
one entry per interface table.
zxr10LdpInterfaceEntry row .1.3.6.1.4.1.3902.3.314.1.9.1
The parameter of an interface entity relating LDP.
Column Syntax OID
The value of this object is the type of the
Internet address. The value of this object,
decides how the value of the zxr10LdpInterfaceAddr
object is interpreted.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.3902.3.314.1.9.1.1
The index of the interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.9.1.2
The name of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.9.1.3
The host ip address of the interface.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.3.314.1.9.1.4
The administer status of the interface.
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.3902.3.314.1.9.1.5
The optrater status of the interface.
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.3902.3.314.1.9.1.6
IP address to use for LDP transport address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.3.314.1.9.1.7
The value of this object is the type of the
Internet address. The value of this object,
decides how the value of the zxr10LdpInterfaceTransAddress
object is interpreted.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.3902.3.314.1.9.1.8
.1.3.6.1.4.1.3902.3.314.1.10 · 1 row entry · 2 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpLabelAdvertiseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpLabelAdvertiseTable'
Acl Table. This table contains
one entry per acl table.
zxr10LdpLabelAdvertiseEntry row .1.3.6.1.4.1.3902.3.314.1.10.1
The parameter of an acl entry relating label advertisement.
Column Syntax OID
The acl number used to filtrate which labels is acceptable.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.10.1.1
The acl number used to filtrate destination of the label sent.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.10.1.2
.1.3.6.1.4.1.3902.3.314.1.11 · 1 row entry · 8 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpEntityHelloIntervTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpEntityHelloIntervTable'
Hello Table. This table contains
one entry per hello table.
zxr10LdpEntityHelloIntervEntry row .1.3.6.1.4.1.3902.3.314.1.11.1
The parameter of a hello entity entry.
Column Syntax OID
The identifier of local lsr used to identify a session.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
.1.3.6.1.4.1.3902.3.314.1.11.1.1
The identifier of peer lsr used to identify a session.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
.1.3.6.1.4.1.3902.3.314.1.11.1.2
An identifier for this specific adjacency.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.11.1.3
The index of interface about hello. If the value is 0xFFFFFFFF
then the hello type is targeted-hello.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.11.1.4
The value of this object is the type of the
Internet address. The value of this object,
decides how the value of the zxr10LdpEntityHelloNexthopAddr
object is interpreted.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.3902.3.314.1.11.1.5
The Nexthop Address about hello.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.3902.3.314.1.11.1.6
The max time between two recving hello message.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.11.1.7
The time span between two sending hello message.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.11.1.8
.1.3.6.1.4.1.3902.3.314.1.12 · 1 row entry · 4 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpMd5Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpMd5Table'
Ldp MD5 Table. This table contains
one entry per MD5 table.
zxr10LdpMd5Entry row .1.3.6.1.4.1.3902.3.314.1.12.1
The parameter of a MD5 entry containing information
about the session set password.
Column Syntax OID
The peer address as the index of MD5.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.314.1.12.1.1
If the MD5 is successfully registered.
Enumeration
Enumerated Values:
0nopwd
1withpwd
.1.3.6.1.4.1.3902.3.314.1.12.1.2
The password used for communication between lsrs.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.12.1.3
The password is encrypted.
Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.3902.3.314.1.12.1.4
.1.3.6.1.4.1.3902.3.314.1.13 · 1 row entry · 12 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpSessTable'
Ldp Session Table. This table contains
one entry per session if it is successfully registered.
zxr10LdpSessEntry row .1.3.6.1.4.1.3902.3.314.1.13.1
The parameter of a session entry containing information
about the session.
Column Syntax OID
The identifier of local lsr used to identify a session.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
.1.3.6.1.4.1.3902.3.314.1.13.1.1
The identifier of peer lsr used to identify a session.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
.1.3.6.1.4.1.3902.3.314.1.13.1.2
The hello adjacency numbers of the session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.13.1.3
The time show how long the session should be keep alive
if no ldp message or the session disappeared.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.13.1.4
The time shows how long the session should wait to
try to reconnect with peer lsr.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.13.1.5
The time of the lsr retry to create a session with peer lsr.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.13.1.6
The time after the session receive last ldp message.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.3902.3.314.1.13.1.7
Indicates the status of the session.
Enumeration
Enumerated Values:
1nonexistent
2initialized
3openrec
4opensent
5operational
6tcpconnawaited
.1.3.6.1.4.1.3902.3.314.1.13.1.8
The name of the interface about session up or down. And the
value of object is 'null' When target session sets up.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.13.1.9
The value of sysUpTime at the time of the most recent
change in state of session from openrec(3) or opensent(4)
to operational(5).
If no such changes have occurred since the last
re-initialization of the local managem…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.3902.3.314.1.13.1.10
The value of sysUpTime at the time of the most recent
change in state of session from operational(5) to nonexistent(1).
If no such changes have occurred since the last
re-initialization of the local management subsyste…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.3902.3.314.1.13.1.11
The reason why the session transitioned from operational to
nonexistent state.
Can be one of the following:
unknown reason, hold time expired, connection time expired,
all adjacencies down, received bad tlv, receive…
Enumeration
Enumerated Values:
0null
1holdExpired
2connectionExpired
3allAdjacenciesDown
4badTLV
5badPDU
6connectionError
7connectionReset
8peerSentNotification
9unexpectedEOF
10clearneighbor
11initError
12gracefulRestartAbort
13cliCommand
14unknown
.1.3.6.1.4.1.3902.3.314.1.13.1.12
.1.3.6.1.4.1.3902.3.314.1.16 · 1 row entry · 11 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpInstCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpInstCfgTable'
Ldp Instance Table. This table contains
one entry per instance table.
zxr10LdpInstCfgEntry row .1.3.6.1.4.1.3902.3.314.1.16.1
The parameter of an instance entity about ldp instance.
Indexes
Column Syntax OID
The Number of the LDP instance. If the value of this object is 0,
then don't exist LDP public instance
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.314.1.16.1.1
ACL name about specify filter packet on source address.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.16.1.2
Show if the mpls ldp graceful-restart is enabled.
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.3.314.1.16.1.3
LDP session max recovery time is set.
Default is 120 seconds.
secondsUnsigned32
Constraints:
range: 15-600
.1.3.6.1.4.1.3902.3.314.1.16.1.4
LDP session keeps its stale label-FEC bindings is set.
Default is 120 seconds.
secondsUnsigned32
Constraints:
range: 5-300
.1.3.6.1.4.1.3902.3.314.1.16.1.5
Show the mpls ldp label retention mode.
Enumeration
Enumerated Values:
1conservative
2liberal
.1.3.6.1.4.1.3902.3.314.1.16.1.6
Show the mpls ldp lsp control mode.
Enumeration
Enumerated Values:
1ordered
2independent
.1.3.6.1.4.1.3902.3.314.1.16.1.7
ACL name about specify IPv4 fec want to get traffic count.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.16.1.8
Show the mpls ldp IPv4 interface global auto config mode.
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.3.314.1.16.1.9
ACL name about specify IPv6 fec want to get traffic count.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.16.1.10
Show the mpls ldp IPv6 interface global auto config mode.
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.3.314.1.16.1.11
.1.3.6.1.4.1.3902.3.314.1.17 · 1 row entry · 4 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpV4IntfCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpV4IntfCfgTable'
Ipv4 Ldp Interface Table. This table contains
one entry per v4 interface table.
zxr10LdpV4IntfCfgEntry row .1.3.6.1.4.1.3902.3.314.1.17.1
The parameter of a v4 interface entity.
Column Syntax OID
The Number of the LDP instance. If the value of this object is 0,
then don't exist LDP public instance
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.314.1.17.1.1
The name of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.17.1.2
The distribution mode of the interface.
Enumeration
Enumerated Values:
1dod
2du
.1.3.6.1.4.1.3902.3.314.1.17.1.3
The gtsm of the interface.
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.3.314.1.17.1.4
.1.3.6.1.4.1.3902.3.314.1.18 · 1 row entry · 3 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpV6IntfCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpV6IntfCfgTable'
Ipv6 Ldp Interface Table. This table contains
one entry per v6 interface table.
zxr10LdpV6IntfCfgEntry row .1.3.6.1.4.1.3902.3.314.1.18.1
The parameter of a v6 interface entity.
Column Syntax OID
The Number of the LDP instance. If the value of this object is 0,
then don't exist LDP public instance
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.314.1.18.1.1
The name of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.18.1.2
The distribution mode of the interface.
Enumeration
Enumerated Values:
1dod
2du
.1.3.6.1.4.1.3902.3.314.1.18.1.3
.1.3.6.1.4.1.3902.3.314.1.19 · 1 row entry · 3 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpGtsmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpGtsmTable'
Gtsm Table. This table contains
one entry per gtsm table.
zxr10LdpGtsmEntry row .1.3.6.1.4.1.3902.3.314.1.19.1
The parameter of a gtsm entity.
Column Syntax OID
The Number of the LDP instance. If the value of this object is 0,
then don't exist LDP public instance
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.314.1.19.1.1
The identifier of peer lsr used to identify a session.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.314.1.19.1.2
The gtsm hop count of the ldp hello.
Unsigned32
Constraints:
range: 1-254
.1.3.6.1.4.1.3902.3.314.1.19.1.3
.1.3.6.1.4.1.3902.3.314.1.20 · 1 row entry · 4 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpPeerBfdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpPeerBfdTable'
LDP Peer Bfd Table. This table contains
one entry per peer bfd table.
zxr10LdpPeerBfdEntry row .1.3.6.1.4.1.3902.3.314.1.20.1
The parameter of a peer bfd entity containing statistics
information about a particular peer bfd.
Column Syntax OID
The Number of the LDP instance. If the value of this object is 0,
then don't exist LDP public instance
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.314.1.20.1.1
The identifier of peer lsr used to identify a session.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.314.1.20.1.2
If the value of this object is 1,
then the Ldp Peer Bfd Creat Delay is enable,
the default delay time is 60 seconds.
IF the value of this object is 2,
then the Ldp Peer Bfd Delay is disable,
Set Ldp Peer Bfd immediately.
Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.3902.3.314.1.20.1.3
Set delay time,
the prerequisite is the value of
zxr10LdpPeerBfdDelay is 1.
Unsigned32
Constraints:
range: 0-720
.1.3.6.1.4.1.3902.3.314.1.20.1.4
.1.3.6.1.4.1.3902.3.314.1.21 · 1 row entry · 2 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpV4DisAutoCfgIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpV4DisAutoCfgIntTable'
Ldp Ipv4 Dis-auto-config Interface Table. This table contains
one entry per v4 dis-auto-config interface table.
zxr10LdpV4DisAutoCfgIntEntry row .1.3.6.1.4.1.3902.3.314.1.21.1
The parameter of a v4 dis-auto-config interface entity.
Column Syntax OID
The Number of the LDP instance. If the value of this object is 0,
then don't exist LDP public instance
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.314.1.21.1.1
The name of the dis-auto-config interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.21.1.2
.1.3.6.1.4.1.3902.3.314.1.22 · 1 row entry · 2 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpV6DisAutoCfgIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpV6DisAutoCfgIntTable'
Ldp IPv6 Dis-auto-config Interface Table. This table contains
one entry per V6 dis-auto-config interface table.
zxr10LdpV6DisAutoCfgIntEntry row .1.3.6.1.4.1.3902.3.314.1.22.1
The parameter of a V6 dis-auto-config interface entity.
Column Syntax OID
The Number of the LDP instance. If the value of this object is 0,
then don't exist LDP public instance
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.314.1.22.1.1
The name of the dis-auto-config interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.22.1.2
.1.3.6.1.4.1.3902.3.314.1.23 · 1 row entry · 2 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LdpIgpSyncIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-MPLS-LDP-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-MPLS-LDP-MIB::zxr10LdpIgpSyncIntTable'
Ldp Enable Igp Synchronization Interface Table. This table contains
one entry per igp sync interface table.
zxr10LdpIgpSyncIntEntry row .1.3.6.1.4.1.3902.3.314.1.23.1
The parameter of a igp synchronization interface entity.
Column Syntax OID
The Number of the LDP instance. If the value of this object is 0,
then don't exist LDP public instance
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.314.1.23.1.1
The name of enable igp synchronization interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.314.1.23.1.2