ZXR10-MLD-SNOOPING-MIB Table View

MLD snooping instance configuration table, 
supports instances such as : VLAN and VPLS.

zxmlsinsEntry row .1.3.6.1.4.1.3902.3.102.54.2.1.1.1

MLD snooping instance entry.
When instance type is VLAN,
index is {type, idx, 0}.
When instance type is VPLS,
index is {type, 0, VPN name}.

Indexes

zxmlsinsType zxmlsinsIdx zxmlsinsName

Column	Syntax	OID
zxmlsinsType Instance type, 1 is VLAN, 3 is VPLS.	InstanceType Type Values: 1 vlan 2 service 3 vpls 4 supervlan 5 vbui 6 ipglobal 7 vrf Description: A type value for the instance	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.1
zxmlsinsIdx Instance ID of VLAN, if instance is VLAN, it is VLAN ID, it is 0 for other instances.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.2
zxmlsinsName Name specified for each configured instance, only valid when instance type is VPLS.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.3
zxmlsinsEnable Enable/disable MLD snooping in this instance.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.4
zxmlsinsFastLeave Enable/disable group membership fast leave.	Enumerationr/w Enumerated Values: 1 slowLeave 2 fastLeave	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.5
zxmlsinsLastMemQryInterval The Last Member Query Interval is the Max Response Time inserted into Multicast-Address-Specific Queries sent in response to Done messages, and is also the amount of time between Multicast-Address-Specific Query mess…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.6
zxmlsinsMaxGroupNum Max number of multicast group can access in this instance. Its minimum value is 1, maximum value depends on the product.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.7
zxmlsinsHostTimeOut Host aging-time. Default: 260 seconds.	Integer32r/w Constraints: range: 30-65535	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.8
zxmlsinsMrouterTimeOut Multicast router port aging-time. Default: 260 seconds.	Integer32r/w Constraints: range: 30-65535	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.9
zxmlsinsQueryEnable Enable/disable Querier in this instance.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.10
zxmlsinsQueryVersion Querier version: V1 or V2.	Enumerationr/w Enumerated Values: 1 v1 2 v2	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.11
zxmlsinsWorkMode Work mode: Proxy, Transparent or Router.	Enumerationr/w Enumerated Values: 1 proxy 2 router 3 transparent	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.12
zxmlsinsAclName ACL name of this instance.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-31 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.13
zxmlsinsRowStatus The status of this row, support 'createAndGo' and 'destroy' for set operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.3.102.54.2.1.1.1.100

MLD snooping group table.

zxmlsGroupEntry row .1.3.6.1.4.1.3902.3.102.54.2.2.1.1

MLD snooping group entry.
When opertation is set, zxmlsGroupSourceIp should be 0,
zxmlsGroupInstanceType should be VLAN or VPLS.
When instance type is VLAN or IP-GLOBAL, zxmlsGroupInstanceName should be 0.
When instance…

Indexes

zxmlsGroupInstanceType zxmlsGroupInstanceIdx zxmlsGroupInstanceName zxmlsGroupIp zxmlsGroupSourceIp

Column	Syntax	OID
zxmlsGroupInstanceType Instance type, 1 is VLAN, 2 is Service, 3 is VPLS, 4 is SUPERVLAN, 5 is VBUI, 6 is IP-GLOBAL, 7 is VRF.	InstanceType Type Values: 1 vlan 2 service 3 vpls 4 supervlan 5 vbui 6 ipglobal 7 vrf Description: A type value for the instance	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.1
zxmlsGroupInstanceIdx Instance ID of VLAN and IP-GLOBAL, if instance is VLAN, it is VLAN ID, if instance is IP-GLOBAL, it is 1, it is 0 for other instances.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.2
zxmlsGroupInstanceName Name specified for each configured instance, only valid when instance type is VPLS, VBUI or VRF.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.3
zxmlsGroupIp MLD snooping Group IPv6 Addr.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.4
zxmlsGroupSourceIp MLD snooping Source IPv6 Addr.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.5
zxmlsGroupDropEnable Enable/disable drop mode of this group. When it is enabled, the mulitcast flow will be dropped if there is no host in this group.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.6
zxmlsGroupMaxHostNum Max number of MLD snooping host can access to this group. Its minimum value is 1, maximum value depends on the product.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.7
zxmlsGroupHostNum Number of MLD snooping host access to this group currently.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.8
zxmlsGroupMac Group MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.9
zxmlsGroupRowStatus The status of this row, by which new group entries with dropEnable or maxHostNum may be created, or old group entries with dropEnable or maxHostNum deleted from this table. Support 'createAndGo' and 'destroy' for set op…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.3.102.54.2.2.1.1.100

MLD snooping host table.

zxmlsHostEntry row .1.3.6.1.4.1.3902.3.102.54.2.3.1.1

MLD snooping host entry.
When operation is set, zxmlsHostSourceIp should be 0,
zxmlsHostInstanceType should be VLAN or VPLS.
When instance type is VLAN or IP-GLOBAL, zxmlsHostInstanceName should be 0.
When instance type…

Indexes

zxmlsHostInstanceType zxmlsHostInstanceIdx zxmlsHostInstanceName zxmlsHostGroupIp zxmlsHostSourceIp zxmlsHostIfName zxmlsHostUserId zxmlsHostPhyName

Column	Syntax	OID
zxmlsHostInstanceType Instance type, 1 is VLAN, 2 is Service, 3 is VPLS, 4 is SUPERVLAN, 5 is VBUI, 6 is IP-GLOBAL, 7 is VRF.	InstanceType Type Values: 1 vlan 2 service 3 vpls 4 supervlan 5 vbui 6 ipglobal 7 vrf Description: A type value for the instance	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.1
zxmlsHostInstanceIdx Instance ID of VLAN and IP-GLOBAL, if instance is VLAN, it is VLAN ID, if instance is IP-GLOBAL, it is 1, it is 0 for other instances.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.2
zxmlsHostInstanceName Name specified for each configured instance, only valid when instance type is VPLS, VBUI or VRF.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.3
zxmlsHostGroupIp MLD snooping host IPv6 Addr.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.4
zxmlsHostSourceIp MLD snooping host source IPv6 Addr.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.5
zxmlsHostIfName Interface name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.6
zxmlsHostUserId For IPTV or SUPERVLAN hosts, it's user VLAN. For M-VPLS hosts, it's user VPLS. For VPLS hosts,it's 0. For IP-Global or VRF hosts, it's a computed value, the high 16 bits is internal VLAN, and the low 16 bits is externa…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.7
zxmlsHostPhyName Physical Interface name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.8
zxmlsHostStaticOrDynamic Mode of this host. It is dynamic if learned from MLD Report, or is static if configured.	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.9
zxmlsHostFilterMode Filter mode of this host.	Enumeration Enumerated Values: 1 include 2 exclude 3 request	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.10
zxmlsHostRowStatus The status of this row, by which new static host entries may be created, or old static host entries deleted from this table. Support 'createAndGo' and 'destroy' for set operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.3.102.54.2.3.1.1.100

MLD snooping multicast router port table.

zxmlsMrEntry row .1.3.6.1.4.1.3902.3.102.54.2.4.1.1

MLD snooping multicast router port entry.
When operation is set, zxmlsMrInstanceType should be VLAN or VPLS.
When instance type is VLAN or IP-GLOBAL, zxmlsMrInstanceName should be 0.
When instance type is VPLS, VBUI or …

Indexes

zxmlsMrInstanceType zxmlsMrInstanceIdx zxmlsMrInstanceName zxmlsMrIfName

Column	Syntax	OID
zxmlsMrInstanceType Instance type, 1 is VLAN, 2 is Service, 3 is VPLS, 4 is SUPERVLAN, 5 is VBUI, 6 is IP-GLOBAL, 7 is VRF.	InstanceType Type Values: 1 vlan 2 service 3 vpls 4 supervlan 5 vbui 6 ipglobal 7 vrf Description: A type value for the instance	.1.3.6.1.4.1.3902.3.102.54.2.4.1.1.1
zxmlsMrInstanceIdx Instance ID of VLAN and IP-GLOBAL, if instance is VLAN, it is VLAN ID, if instance is IP-GLOBAL, it is 1, it is 0 for other instances.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.4.1.1.2
zxmlsMrInstanceName Name specified for each configured instance, only valid when instance type is VPLS, VBUI or VRF.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.4.1.1.3
zxmlsMrIfName Interface name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.4.1.1.4
zxmlsMrStaticOrDynamic Mode of this multicast router port. It is dynamic if learned from MLD Query, or is static if configured.	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.3902.3.102.54.2.4.1.1.5
zxmlsMrVersion Version of this multicast router port.	Enumeration Enumerated Values: 1 v1 2 v2	.1.3.6.1.4.1.3902.3.102.54.2.4.1.1.6
zxmlsMrRowStatus The status of this row, by which new static multicast router port entries may be created, or old static multicast router port entries deleted from this table. Support 'createAndGo' and 'destroy' for set operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.3.102.54.2.4.1.1.100

MLD snooping instance summary table, 
MLD snooping supports instances such as : VLAN, Service, VPLS, 
SUPERVLAN, VBUI, IP-GLOBAL and VRF.
Some instances are not supported now,
but reserved for compatibility.

zxmlssInstanceEntry row .1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1

MLD snooping instance summary entry.

Indexes

zxmlssInstanceType zxmlssInstanceIdx zxmlssInstanceName

Column	Syntax	OID
zxmlssInstanceType Instance type, 1 is VLAN, 2 is Service, 3 is VPLS, 4 is SUPERVLAN, 5 is VBUI, 6 is IP-GLOBAL, 7 is VRF.	InstanceType Type Values: 1 vlan 2 service 3 vpls 4 supervlan 5 vbui 6 ipglobal 7 vrf Description: A type value for the instance	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.1
zxmlssInstanceIdx Instance ID of VLAN and IP-GLOBAL, if instance is VLAN, it is VLAN ID, if instance is IP-GLOBAL, it is 1, it is 0 for other instances.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.2
zxmlssInstanceName Name specified for each configured instance, only valid when instance type is VPLS, VBUI or VRF.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.3
zxmlssInstanceTotalGroupNum Number of multicast group access to this instance currently.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.4
zxmlssInstanceExistHostGroupNum Number of multicast group which exist MLD host.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.5
zxmlssInstanceDropGroupNum Number of multicast group which configured as drop mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.6
zxmlssInstancePrejoinGroupNum Number of multicast group which configured as prejoin mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.7
zxmlssInstanceMaxHostGroupNum Number of multicast group which configured with max host number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.8
zxmlssInstanceSSMGroupNum Number of source-specific multicast group access currently.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.9
zxmlssInstanceASMGroupNum Number of anycast-specific multicast group access to this instance currently.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.10
zxmlssInstanceTotalHostNum Number of host access to this instance currently.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.11
zxmlssInstanceDynamicHostNum Number of dynamic host access to this instance currently.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.12
zxmlssInstanceStaticHostNum Number of static host access to this instance currently.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.3.102.54.2.5.2.1.1.13