ZXR10-IF-STAT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
200

zxr10IfTrafficStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.1 · 1 row entry · 38 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfTrafficStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfTrafficStatTable'
zxr10IfTrafficStatEntry row .1.3.6.1.4.1.3902.3.6000.150.1.1
Indexes
Column Syntax OID
zxr10IfTrafficStatIfIndex
Interface index
InterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3902.3.6000.150.1.1.1
zxr10IfTrafficStatIfName
Interface name
SNMPv2-TCDisplayString
Constraints:
range: 0-36
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.1.1.2
zxr10IfTrafficStatInPkts
In packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.3
zxr10IfTrafficStatOutPkts
Out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.4
zxr10IfTrafficStatInReceivesV4
ipSystemStatsInReceivesV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.5
zxr10IfTrafficStatInOctetsV4
ipSystemStatsInOctetsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.6
zxr10IfTrafficStatInHdrErrorsV4
ipSystemStatsInHdrErrorsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.7
zxr10IfTrafficStatInAddrErrorsV4
ipSystemStatsInAddrErrorsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.8
zxr10IfTrafficStatInTruncatedPktsV4
ipSystemStatsInTruncatedPktsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.9
zxr10IfTrafficStatInBcastPktsV4
ipSystemStatsInBcastPktsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.10
zxr10IfTrafficStatInNoRoutesV4
ipSystemStatsInNoRoutesV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.11
zxr10IfTrafficStatInUnknownProtosV4
ipSystemStatsInUnknownProtosV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.12
zxr10IfTrafficStatInDiscardsV4
ipSystemStatsInDiscardsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.13
zxr10IfTrafficStatInForwDatagramsV4
ipSystemStatsInForwDatagramsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.14
zxr10IfTrafficStatInReceivesV6
ipSystemStatsInReceivesV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.15
zxr10IfTrafficStatInOctetsV6
ipSystemStatsInOctetsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.16
zxr10IfTrafficStatInHdrErrorsV6
ipSystemStatsInHdrErrorsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.17
zxr10IfTrafficStatInTruncatedPktsV6
ipSystemStatsInTruncatedPktsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.18
zxr10IfTrafficStatInAddrErrorsV6
ipSystemStatsInAddrErrorsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.19
zxr10IfTrafficStatInBcastPktsV6
ipSystemStatsInBcastPktsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.20
zxr10IfTrafficStatInNoRoutesV6
ipSystemStatsInNoRoutesV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.21
zxr10IfTrafficStatInUnknownProtosV6
ipSystemStatsInUnknownProtosV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.22
zxr10IfTrafficStatInDiscardsV6
ipSystemStatsInDiscardsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.23
zxr10IfTrafficStatInForwDatagramsV6
ipSystemStatsInForwDatagramsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.24
zxr10IfTrafficStatOutDiscardsV4
ipSystemStatsOutDiscardsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.25
zxr10IfTrafficStatOutForwDatagramsV4
ipSystemStatsOutForwDatagramsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.26
zxr10IfTrafficStatOutFragReqdsV4
ipSystemStatsOutFragReqdsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.27
zxr10IfTrafficStatOutDiscardsV6
ipSystemStatsOutDiscardsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.28
zxr10IfTrafficStatOutForwDatagramsV6
ipSystemStatsOutForwDatagramsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.29
zxr10IfTrafficStatOutFragReqdsV6
ipSystemStatsOutFragReqdsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.30
zxr10IfTrafficStatInUpsendCarDrop
ipSystemStatsInUpsendCarDrop
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.31
zxr10IfTrafficStatOutV4
ipSystemStatsOutV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.32
zxr10IfTrafficStatOutOctetsV4
ipSystemStatsOutOctetsV4
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.33
zxr10IfTrafficStatOutV6
ipSystemStatOutV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.34
zxr10IfTrafficStatOutOctetsV6
ipSystemStatOutOctetsV6
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.35
zxr10IfTrafficStatOutUpCarDrop
ipSystemStatsOutUpCarDrop
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.36
zxr10IfTrafficStatInV4UrpfDrpPkts
ipSystemStatsInV4UrpfDrpPkts
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.37
zxr10IfTrafficStatInV6UrpfDrpPkts
ipSystemStatsInV6UrpfDrpPkts
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.1.1.38

zxr10TeIfTrafficStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.2 · 1 row entry · 40 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10TeIfTrafficStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10TeIfTrafficStatTable'
zxr10TeIfTrafficStatEntry row .1.3.6.1.4.1.3902.3.6000.150.2.1
Indexes
Column Syntax OID
zxr10TeIfTrafficStatTeTunnelID
Te tunnel ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.2.1.1
zxr10TeIfTrafficStatIfIndex
Te tunnel interface index
InterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3902.3.6000.150.2.1.2
zxr10TeIfTrafficStatIfName
Te tunnel interface name
SNMPv2-TCDisplayString
Constraints:
range: 0-36
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.2.1.3
zxr10TeIfTrafficStatOutBytes
Te tunnel interface out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.4
zxr10TeIfTrafficStatOutPkts
Te tunnel interface out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.5
zxr10TeIfTrafficStatOutBandwidth
Te tunnel interface out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.6
zxr10TeIfTrafficStatOutPri0Bytes
Te tunnel interface priority 0 out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.7
zxr10TeIfTrafficStatOutPri0Pkts
Te tunnel interface priority 0 out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.8
zxr10TeIfTrafficStatOutPri0Bandwidth
Te tunnel interface priority 0 out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.9
zxr10TeIfTrafficStatOutPri1Bytes
Te tunnel interface priority 1 out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.10
zxr10TeIfTrafficStatOutPri1Pkts
Te tunnel interface priority 1 out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.11
zxr10TeIfTrafficStatOutPri1Bandwidth
Te tunnel interface priority 1 out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.12
zxr10TeIfTrafficStatOutPri2Bytes
Te tunnel interface priority 2 out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.13
zxr10TeIfTrafficStatOutPri2Pkts
Te tunnel interface priority 2 out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.14
zxr10TeIfTrafficStatOutPri2Bandwidth
Te tunnel interface priority 2 out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.15
zxr10TeIfTrafficStatOutPri3Bytes
Te tunnel interface priority 3 out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.16
zxr10TeIfTrafficStatOutPri3Pkts
Te tunnel interface priority 3 out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.17
zxr10TeIfTrafficStatOutPri3Bandwidth
Te tunnel interface priority 3 out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.18
zxr10TeIfTrafficStatOutPri4Bytes
Te tunnel interface priority 4 out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.19
zxr10TeIfTrafficStatOutPri4Pkts
Te tunnel interface priority 4 out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.20
zxr10TeIfTrafficStatOutPri4Bandwidth
Te tunnel interface priority 4 out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.21
zxr10TeIfTrafficStatOutPri5Bytes
Te tunnel interface priority 5 out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.22
zxr10TeIfTrafficStatOutPri5Pkts
Te tunnel interface priority 5 out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.23
zxr10TeIfTrafficStatOutPri5Bandwidth
Te tunnel interface priority 5 out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.24
zxr10TeIfTrafficStatOutPri6Bytes
Te tunnel interface priority 6 out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.25
zxr10TeIfTrafficStatOutPri6Pkts
Te tunnel interface priority 6 out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.26
zxr10TeIfTrafficStatOutPri6Bandwidth
Te tunnel interface priority 6 out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.27
zxr10TeIfTrafficStatOutPri7Bytes
Te tunnel interface priority 7 out bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.28
zxr10TeIfTrafficStatOutPri7Pkts
Te tunnel interface priority 7 out packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.29
zxr10TeIfTrafficStatOutPri7Bandwidth
Te tunnel interface priority 7 out bandwidth
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.30
zxr10TeIfTrafficStatInBytes
Te tunnel interface in bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.31
zxr10TeIfTrafficStatInPkts
Te tunnel interface in packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.32
zxr10TeIfTrafficStatInDiscBytes
Te tunnel interface in discard bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.33
zxr10TeIfTrafficStatInDiscPkts
Te tunnel interface in discard packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.34
zxr10TeIfTrafficStatOutDiscBytes
Te tunnel interface out discard bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.35
zxr10TeIfTrafficStatOutDiscPkts
Te tunnel interface out discard packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.36
zxr10TeIfTrafficStatInPNBytes
Te tunnel interface reverse receiving bytes of Node-P
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.37
zxr10TeIfTrafficStatInPNPkts
Te tunnel interface reverse receiving packets of Node-P
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.38
zxr10TeIfTrafficStatOutPNBytes
Te tunnel interface reverse sending bytes of Node-P
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.39
zxr10TeIfTrafficStatOutPNPkts
Te tunnel interface reverse sending packets of Node-P
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.2.1.40

zxr10IfPerfSwitchTable

table
.1.3.6.1.4.1.3902.3.6000.150.4 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfPerfSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfPerfSwitchTable'
zxr10IfPerfSwitchEntry row .1.3.6.1.4.1.3902.3.6000.150.4.1
Indexes
Column Syntax OID
zxr10IfPerfSwitchIfName
Interface name.
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.4.1.1
zxr10IfPerfSwitchEnable
Interface performance switch,1(enable).This config can be deleted
by row status destroy(6).
Switchr/w
Type Values:
0disable
1enable
Description:
A switching value, the value of 0 indicates that the closure,
the value of 1 indicates that the open.
 .1.3.6.1.4.1.3902.3.6000.150.4.1.2
zxr10IfPerfSwitchRowStatus
Row status.active(1),notInService(2),notReady(3),createAndGo(4),
createAndWait(5),destroy(6).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.150.4.1.100

zxr10IfPerfSpecialIfSwitchTable

table
.1.3.6.1.4.1.3902.3.6000.150.5 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfPerfSpecialIfSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfPerfSpecialIfSwitchTable'
zxr10IfPerfSpecialIfSwitchEntry row .1.3.6.1.4.1.3902.3.6000.150.5.1
Indexes
Column Syntax OID
zxr10IfPerfSpecialIfSwitchIfName
Interface name.
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.5.1.1
zxr10IfPerfSpecialIfSwitchEnable
Interface performance switch,1(enable).This config can be deleted
by row status destroy(6).
Switchr/w
Type Values:
0disable
1enable
Description:
A switching value, the value of 0 indicates that the closure,
the value of 1 indicates that the open.
 .1.3.6.1.4.1.3902.3.6000.150.5.1.2
zxr10IfPerfSpecialIfSwitchRowStatus
Row status.active(1),notInService(2),notReady(3),createAndGo(4),
createAndWait(5),destroy(6).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.150.5.1.100

zxr10IfPerf1MinPeakTable

table
.1.3.6.1.4.1.3902.3.6000.150.6 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfPerf1MinPeakTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfPerf1MinPeakTable'
zxr10IfPerf1MinPeakEntry row .1.3.6.1.4.1.3902.3.6000.150.6.1
Indexes
Column Syntax OID
zxr10IfPerf1MinPeakIfName
Interface name.This must be blank when zxr10IfPerf1MinPeakAllIntf
is valid.
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.6.1.1
zxr10IfPerf1MinPeakAllIntf
Clear all interface one minute peak,valid for all interface when
this item is 255 and zxr10IfPerf1MinPeakIfName is blank. If
zxr10IfPerf1MinPeakAllIntf is 0,only zxr10IfPerf1MinPeakIfName
is valid.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.6.1.2
zxr10IfPerf1MinPeakEnable
One minute peak switch.This config can be deleted by row status
destroy(6).
Switchr/w
Type Values:
0disable
1enable
Description:
A switching value, the value of 0 indicates that the closure,
the value of 1 indicates that the open.
 .1.3.6.1.4.1.3902.3.6000.150.6.1.3
zxr10IfPerf1MinPeakRowStatus
Row status.active(1),notInService(2),notReady(3),createAndGo(4),
createAndWait(5),destroy(6).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.150.6.1.100

zxr10IfPerfLimitTable

table
.1.3.6.1.4.1.3902.3.6000.150.7 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfPerfLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfPerfLimitTable'
zxr10IfPerfLimitEntry row .1.3.6.1.4.1.3902.3.6000.150.7.1
Indexes
Column Syntax OID
zxr10IfPerfLimitIfName
Interface name.This can set performance limit for physical
interface or son interface.
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.7.1.1
zxr10IfPerfLimitType
Performance limit type.Value range of physical interface is from
1 to 4.1 is InputRatio limit,2 is OutputRatio limit,3 is
FcserrCount limit,4 is FcserrRatio.Value range of son interface
is from 1 to 2.1 is InputRatio …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.7.1.2
zxr10IfPerfLimitRatioLow
Performance ratio low limit.Value range is from 0 to 99,default
is 0.It can not be set when zxr10IfPerfLimitType is 3.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.7.1.3
zxr10IfPerfLimitRatioHigh
Performance ratio high limit.Value range is from 1 to 100,default
is 100.It can not be set when zxr10IfPerfLimitType is 3.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.7.1.4
zxr10IfPerfLimitCountLow
Performance count low limit.Value range is from 0 to 4294967294.
It can not be set when zxr10IfPerfLimitType is 1 or 2 or 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.7.1.5
zxr10IfPerfLimitCountHigh
Performance count high limit.Value range is from 1 to 4294967295.
It can not be set when zxr10IfPerfLimitType is 1 or 2 or 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.7.1.6
zxr10IfPerfLimitRowStatus
Row status.active(1),notInService(2),notReady(3),createAndGo(4),
createAndWait(5),destroy(6).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.150.7.1.100

zxr10IfPerfSubIfLimitTable

table
.1.3.6.1.4.1.3902.3.6000.150.8 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfPerfSubIfLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfPerfSubIfLimitTable'
zxr10IfPerfSubIfLimitEntry row .1.3.6.1.4.1.3902.3.6000.150.8.1
Indexes
Column Syntax OID
zxr10IfPerfSubIfLimitIfName
Physical interface name.
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.8.1.1
zxr10IfPerfSubIfLimitType
Performance limit type.Value range is from 1 to 2.1 is InputRatio
limit,2 is OutputRatio limit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.8.1.2
zxr10IfPerfSubIfLimitRatioLow
Performance ratio low limit.Value range is from 0 to 99,default
is 0.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.8.1.3
zxr10IfPerfSubIfLimitRatioHigh
Performance ratio high limit.Value range is from 1 to 100,default
is 100.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.8.1.4
zxr10IfPerfSubIfLimitRowStatus
Row status.active(1),notInService(2),notReady(3),createAndGo(4),
createAndWait(5),destroy(6).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.150.8.1.100

zxr10IfIPv6StatsTable

table
.1.3.6.1.4.1.3902.3.6000.150.9 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfIPv6StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfIPv6StatsTable'
zxr10IfIPv6StatsEntry row .1.3.6.1.4.1.3902.3.6000.150.9.1
Indexes
Column Syntax OID
zxr10IfIPv6StatsIfName
Interface name.
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.9.1.1
zxr10IfIPv6StatsInBytesSpeed
IPv6 traffic receiving bytes rate.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.9.1.2
zxr10IfIPv6StatsOutBytesSpeed
IPv6 traffic sending bytes rate.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.9.1.3
zxr10IfIPv6StatsInPktsSpeed
IPv6 traffic receiving package rate.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.9.1.4
zxr10IfIPv6StatsOutPktsSpeed
IPv6 traffic sending package rate.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.9.1.5
zxr10IfIPv6StatsInDiscPktsRatio
IPv6 traffic receiving discarded package ratio.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.9.1.6
zxr10IfIPv6StatsOutDiscPktsRatio
IPv6 traffic sending discarded package ratio.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.9.1.7
zxr10IfIPv6StatsInUtilization
IPv6 traffic receiving bandwidth utilization.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.9.1.8
zxr10IfIPv6StatsOutUtilization
IPv6 traffic sending bandwidth utilization.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.9.1.9
zxr10IfIPv6StatsSystemUpTime
IPv6 traffic system up time.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.9.1.10

zxr10IfHwCountersTable

table
.1.3.6.1.4.1.3902.3.6000.150.10 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfHwCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfHwCountersTable'
zxr10IfHwCountersEntry row .1.3.6.1.4.1.3902.3.6000.150.10.1
Indexes
Column Syntax OID
zxr10IfHwCountersIfName
Interface name.
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.10.1.1
zxr10IfHwCountersInCrcRatio
Receiving CRC errors ratio of hardware counters.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.10.1.2
zxr10IfHwCountersOutCrcRatio
Sending CRC errors ratio of hardware counters.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.10.1.3

zxr10WlanBssCountersTable

table
.1.3.6.1.4.1.3902.3.6000.150.11 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10WlanBssCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10WlanBssCountersTable'
zxr10WlanBssCountersEntry row .1.3.6.1.4.1.3902.3.6000.150.11.1
Indexes
Column Syntax OID
zxr10WlanBssCountersIfName
Interface name.
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.11.1.1
zxr10WlanBssCountersInBytes
Wlan Bss interface in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.2
zxr10WlanBssCountersInPkts
Wlan Bss interface in packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.3
zxr10WlanBssCountersInErrs
Wlan Bss interface in Errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.4
zxr10WlanBssCountersInDrop
Wlan Bss interface in drop counters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.5
zxr10WlanBssCountersInOverFlow
Wlan Bss interface in fifo overflow counters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.6
zxr10WlanBssCountersOutBytes
Wlan Bss interface in drop counters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.7
zxr10WlanBssCountersOutPkts
Wlan Bss interface out packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.8
zxr10WlanBssCountersOutErrs
Wlan Bss interface out errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.9
zxr10WlanBssCountersOutDrop
Wlan Bss interface out drop counters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.11.1.10

zxr10GreTunnelStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.12 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10GreTunnelStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10GreTunnelStatTable' 
A list of GRE tunnel statistices entries.
zxr10GreTunnelStatEntry row .1.3.6.1.4.1.3902.3.6000.150.12.1
An entry containing statistices information of a GRE tunnel.
Indexes
Column Syntax OID
zxr10GreTunnelStatIfName
GRE tunnel name.
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.12.1.1
zxr10GreTunnelStatInBytes
GRE tunnel in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.12.1.2
zxr10GreTunnelStatInPkts
GRE tunnel in packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.12.1.3
zxr10GreTunnelStatOutBytes
GRE tunnel out bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.12.1.4
zxr10GreTunnelStatOutPkts
GRE tunnel out packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.12.1.5
zxr10GreTunnelStatInDropBytes
GRE tunnel in drop bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.12.1.6
zxr10GreTunnelStatInDropPkts
GRE tunnel in drop packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.12.1.7
zxr10GreTunnelStatOutDropBytes
GRE tunnel out drop bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.12.1.8
zxr10GreTunnelStatOutDropPkts
GRE tunnel out drop packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.12.1.9

zxr10PhyIfStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.13 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10PhyIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10PhyIfStatTable' 
PhySical Interface statistics Table
zxr10PhyIfStatEntry row .1.3.6.1.4.1.3902.3.6000.150.13.1
PhySical Interface statistics Table Entry
Indexes
Column Syntax OID
zxr10PhyIfName
Interface name
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.13.1.1
zxr10PhyIfInOctets
The total number of octets received on the interface,
including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.2
zxr10PhyIfInUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.3
zxr10PhyIfInDiscards
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.5
zxr10PhyIfInErrors
For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.6
zxr10PhyIfInUnknownProtos
For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protoc…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.7
zxr10PhyIfOutOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.8
zxr10PhyIfOutUcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.9
zxr10PhyIfOutDiscards
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.11
zxr10PhyIfOutErrors
For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.13.1.12

zxr10IPLogicIfStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.14 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IPLogicIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IPLogicIfStatTable' 
IPv4/v6 Interface statistics Table
zxr10IPLogicIfStatEntry row .1.3.6.1.4.1.3902.3.6000.150.14.1
IPv4/v6 Interface statistics Table Entry
Indexes
Column Syntax OID
zxr10IPLogicIfName
Interface name
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.14.1.1
zxr10IPLogicIfInOctets
The total number of octets received on the interface,
including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.2
zxr10IPLogicIfInUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.3
zxr10IPLogicIfInDiscards
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.5
zxr10IPLogicIfInErrors
For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.6
zxr10IPLogicIfInUnknownProtos
For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protoc…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.7
zxr10IPLogicIfOutOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.8
zxr10IPLogicIfOutUcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.9
zxr10IPLogicIfOutDiscards
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.11
zxr10IPLogicIfOutErrors
For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.14.1.12

zxr10NoIPLogicIfStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.15 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10NoIPLogicIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10NoIPLogicIfStatTable' 
No IPv4/v6 Interface statistics Table
zxr10NoIPLogicIfStatEntry row .1.3.6.1.4.1.3902.3.6000.150.15.1
No IPv4/v6 Interface statistics Table Entry
Indexes
Column Syntax OID
zxr10NoIPLogicIfName
Interface name
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.15.1.1
zxr10NoIPLogicIfInOctets
The total number of octets received on the interface,
including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.2
zxr10NoIPLogicIfInUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.3
zxr10NoIPLogicIfInDiscards
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.5
zxr10NoIPLogicIfInErrors
For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol. For character-
oriented or fixed-length interfaces, the number of i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.6
zxr10NoIPLogicIfInUnknownProtos
For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protoc…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.7
zxr10NoIPLogicIfOutOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.8
zxr10NoIPLogicIfOutUcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.9
zxr10NoIPLogicIfOutDiscards
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.11
zxr10NoIPLogicIfOutErrors
For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.6000.150.15.1.12

zxr10IfRatioGatherTable

table
.1.3.6.1.4.1.3902.3.6000.150.16 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfRatioGatherTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfRatioGatherTable' 
Interface RatioGather Table
zxr10IfRatioGatherEntry row .1.3.6.1.4.1.3902.3.6000.150.16.1
Interface RatioGather Table Entry
Indexes
Column Syntax OID
zxr10IfRatioGatherIfName
Interface name
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.16.1.1
zxr10IfRatioGatherInErrPkts
Interface Received Ratio of Error Packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.16.1.2
zxr10IfRatioGatherOutErrPkts
Interface Sent Ratio of Error Packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.16.1.3
zxr10IfRatioGatherInDrpPkts
Interface Received Ratio of Discards Packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.16.1.4
zxr10IfRatioGatherOutDrpPkts
Interface Sent Ratio of Discards Packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.16.1.5
zxr10IfRatioGatherInUtilization
Interface Utilization of Received Packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.16.1.6
zxr10IfRatioGatherOutUtilization
Interface Utilization of Sent Packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.6000.150.16.1.7

zxr10IfSpeedGatherTable

table
.1.3.6.1.4.1.3902.3.6000.150.17 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfSpeedGatherTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfSpeedGatherTable' 
Interface SpeedGather Table
zxr10IfSpeedGatherEntry row .1.3.6.1.4.1.3902.3.6000.150.17.1
Interface SpeedGather Table Entry
Indexes
Column Syntax OID
zxr10IfSpeedGatherIfName
Interface name
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.17.1.1
zxr10IfSpeedGatherInByteSpeed
Interface Received Rate of Bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.17.1.2
zxr10IfSpeedGatherOutByteSpeed
Interface Sent Rate of Bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.17.1.3
zxr10IfSpeedGatherInPktsSpeed
Interface Received Rate of Packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.17.1.4
zxr10IfSpeedGatherOutPktsSpeed
Interface Sent Rate of Packets
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.17.1.5
zxr10IfSpeedGatherInBPeakSpeed
Interface Received Peak Rate of Bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.17.1.6
zxr10IfSpeedGatherInBPeakTime
Interface Received Peak Rate Time of Bytes
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.17.1.7
zxr10IfSpeedGatherOutBPeakSpeed
Interface Sent Peak Rate of Bytes
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.17.1.8
zxr10IfSpeedGatherOutBPeakTime
Interface Sent Peak Rate Time of Bytes
SNMPv2-TCDisplayString
Constraints:
range: 0-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.17.1.9
zxr10IfSpeedGatherInBitSpeed
Interface Received Rate of Bits
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.17.1.10
zxr10IfSpeedGatherOutBitSpeed
Interface Sent Rate of Bits
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.17.1.11

zxr10VxLanTunnelStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.18 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10VxLanTunnelStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10VxLanTunnelStatTable' 
A list of VxLan tunnel statistices entries.
zxr10VxLanTunnelStatEntry row .1.3.6.1.4.1.3902.3.6000.150.18.1
An entry containing statistices information of a VxLan tunnel.
Indexes
Column Syntax OID
zxr10VxLanTunnelStatIfName
VxLan Tunnel name.
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.18.1.1
zxr10VxLanTunnelStatInBytes
VxLan Tunnel in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.18.1.2
zxr10VxLanTunnelStatInPkts
VxLan Tunnel in packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.18.1.3
zxr10VxLanTunnelStatOutBytes
VxLan Tunnel out bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.18.1.4
zxr10VxLanTunnelStatOutPkts
VxLan Tunnel out packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.18.1.5
zxr10VxLanTunnelStatInDropBytes
VxLan Tunnel in drop bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.18.1.6
zxr10VxLanTunnelStatInDropPkts
VxLan Tunnel in drop packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.18.1.7
zxr10VxLanTunnelStatOutDropBytes
VxLan Tunnel out drop bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.18.1.8
zxr10VxLanTunnelStatOutDropPkts
VxLan Tunnel out drop packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.18.1.9

zxr10SpiStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.19 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10SpiStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10SpiStatTable' 
A list of Spi statistices entries.
zxr10SpiStatEntry row .1.3.6.1.4.1.3902.3.6000.150.19.1
An entry containing statistices information of a spi.
Indexes
Column Syntax OID
zxr10SpiStatIfName
Spi name.
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.19.1.1
zxr10SpiStatInBytes
Spi in bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.19.1.2
zxr10SpiStatInPkts
Spi in packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.19.1.3
zxr10SpiStatInCRCErrorPkts
Spi in CRC-ERROR packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.19.1.4
zxr10SpiStatOutBytes
Spi out bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.19.1.5
zxr10SpiStatOutPkts
Spi out packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.19.1.6
zxr10SpiStatInDropPkts
Spi in drop packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.19.1.7
zxr10SpiStatOutDropPkts
Spi out drop packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.3.6000.150.19.1.8

zxr10IfRateStatTable

table
.1.3.6.1.4.1.3902.3.6000.150.20 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IfRateStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-IF-STAT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-IF-STAT-MIB::zxr10IfRateStatTable' 
A list of interface rate statistices configuration entries.
zxr10IfRateStatEntry row .1.3.6.1.4.1.3902.3.6000.150.20.1
An entry containing interface rate statistices configuration.
Indexes
Column Syntax OID
zxr10IfRateStatIfName
Interface name.
SNMPv2-TCDisplayString
Constraints:
range: 1-31
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.6000.150.20.1.1
zxr10IfRateStatPeriod
Interface rate period.
Rate period which is a multiple of 10 (sec).
secondsUnsigned32r/w
Constraints:
range: 10-600
 .1.3.6.1.4.1.3902.3.6000.150.20.1.2
zxr10IfRateStatRowStatus
Row status.active(1),notInService(2),notReady(3),createAndGo(4),
createAndWait(5),destroy(6).
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.6000.150.20.1.100