ZXR10-FILE-SYSTEM-MIB

        ZXR10 T8000 ZXR10FILESYSTEM-MIB
    
Source file
ZXR10-FILE-SYSTEM-MIB
Last revised
Identity
zte
Base OID
1.3.6.1.4.1.3902
Imported Objects
SNMPv2-CONF NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the zte-ng MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZXR10-FILE-SYSTEM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZXR10-FILE-SYSTEM-MIB::zte'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-FILE-SYSTEM-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-FILE-SYSTEM-MIB::zte'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (46)
zte
.1.3.6.1.4.1.3902
.1.3.6.1.4.1.3902.3
.1.3.6.1.4.1.3902.3.6000
.1.3.6.1.4.1.3902.3.6000.5
.1.3.6.1.4.1.3902.3.6000.5.1
.1.3.6.1.4.1.3902.3.6000.5.1.1
.1.3.6.1.4.1.3902.3.6000.5.1.1.1
zxr10storageName obsolete
.1.3.6.1.4.1.3902.3.6000.5.1.1.2
zxr10storageType obsolete
.1.3.6.1.4.1.3902.3.6000.5.1.1.3
zxr10storageDesc obsolete r/w
.1.3.6.1.4.1.3902.3.6000.5.1.1.4
.1.3.6.1.4.1.3902.3.6000.5.1.1.5
.1.3.6.1.4.1.3902.3.6000.5.1.1.6
.1.3.6.1.4.1.3902.3.6000.5.1.1.7
.1.3.6.1.4.1.3902.3.6000.5.1.1.8
.1.3.6.1.4.1.3902.3.6000.5.1.1.9
.1.3.6.1.4.1.3902.3.6000.5.2
.1.3.6.1.4.1.3902.3.6000.5.2.1
.1.3.6.1.4.1.3902.3.6000.5.2.1.1
.1.3.6.1.4.1.3902.3.6000.5.2.1.2
zxr10partitionDesc obsolete r/w
.1.3.6.1.4.1.3902.3.6000.5.2.1.3
.1.3.6.1.4.1.3902.3.6000.5.2.1.4
.1.3.6.1.4.1.3902.3.6000.5.2.1.5
.1.3.6.1.4.1.3902.3.6000.5.2.1.6
.1.3.6.1.4.1.3902.3.6000.5.2.1.7
.1.3.6.1.4.1.3902.3.6000.5.3
.1.3.6.1.4.1.3902.3.6000.5.3.1
.1.3.6.1.4.1.3902.3.6000.5.3.1.1
.1.3.6.1.4.1.3902.3.6000.5.3.1.2
.1.3.6.1.4.1.3902.3.6000.5.3.1.3
.1.3.6.1.4.1.3902.3.6000.5.3.1.4
.1.3.6.1.4.1.3902.3.6000.5.3.1.5
.1.3.6.1.4.1.3902.3.6000.5.3.1.6
.1.3.6.1.4.1.3902.3.6000.5.4
.1.3.6.1.4.1.3902.3.6000.5.4.1
Unsigned32
.1.3.6.1.4.1.3902.3.6000.5.4.1.1
.1.3.6.1.4.1.3902.3.6000.5.4.1.10
.1.3.6.1.4.1.3902.3.6000.5.4.1.11
.1.3.6.1.4.1.3902.3.6000.5.4.1.2
.1.3.6.1.4.1.3902.3.6000.5.4.1.3
.1.3.6.1.4.1.3902.3.6000.5.4.1.4
.1.3.6.1.4.1.3902.3.6000.5.4.1.5
.1.3.6.1.4.1.3902.3.6000.5.4.1.6
.1.3.6.1.4.1.3902.3.6000.5.4.1.7
.1.3.6.1.4.1.3902.3.6000.5.4.1.8
.1.3.6.1.4.1.3902.3.6000.5.4.1.9
.1.3.6.1.4.1.3902.3.6000.5.5
Dependencies (3) 3 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. ZXR10-FILE-SYSTEM-MIBzte-ngselected
Type Definitions (2)
Enumeration
unknown(1)
badFileName(2)
fileNameTooLong(3)
fileLevelTooLong(4)
fileOprForbid(5)
srcNotExist(6)
dstExist(7)
dstDirNotExist(8)
The reason a file-copy request failed.
Enumeration
waiting(1)
running(2)
successful(3)
failed(4)
The state of a copy operation.
The description of each state is given below:

waiting: only one file-copy request can run
at any time. A newly activated
file-copy request is placed in this
state if another request has already
been activated.

running: this state signifies that the file-copy
request is running.

successsful: the state when a file-copy request is
successfully completed.

failed: the file-copy request was unsuccesful.
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.3902.3.6000.5.5.1
A copyCompletion trap is sent at the completion
of a config-copy request. The copyFailCause is not
instantiated, and hence not included in a trap, when
the copyState is success.