ZXR10-DHCPSNOOPING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
42

dhcpv4SnoopingGlobalVlanTable

table
.1.3.6.1.4.1.3902.3.102.33.13 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk dhcpv4SnoopingGlobalVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-DHCPSNOOPING-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-DHCPSNOOPING-MIB::dhcpv4SnoopingGlobalVlanTable' 
The table includes DHCPv4 snooping parameters of option.
dhcpv4SnoopingGlobalVlanEntry row .1.3.6.1.4.1.3902.3.102.33.13.1
An entry includes DHCPv4 snooping parameters of option.
Indexes
Column Syntax OID
dhcpv4SnoopingVlanId
VLAN ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.102.33.13.1.1
dhcpv4SnoopingVlanState
Function of DHCPv4 snooping is opened under VLAN,
enable: receive the DHCPv4 packets,
disable: discard the DHCPv4 packets.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.102.33.13.1.2
dhcpv4SnoopingVlanRemoteId
The string of remote-id indicated the server's MAC which is not allowed to overstep 256 octets.
All kinds of character can be used except ' '.
DisplayString .1.3.6.1.4.1.3902.3.102.33.13.1.3
dhcpv4SnoopingVlanCircuitId
The string of the circuit-id describes a series of user's circuit information. User can be located definitely throughout it.
The string is not allowed to overstep 256 octets and all kinds of character can be used except…
DisplayString .1.3.6.1.4.1.3902.3.102.33.13.1.4

dhcpv4SnoopingIfTable

table
.1.3.6.1.4.1.3902.3.102.33.14 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk dhcpv4SnoopingIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-DHCPSNOOPING-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-DHCPSNOOPING-MIB::dhcpv4SnoopingIfTable' 
The table includes DHCPv4 snooping running parameters of each interface.
dhcpv4SnoopingIfEntry row .1.3.6.1.4.1.3902.3.102.33.14.1
An entry includes DHCPv4 snooping running parameters of each interface.
Indexes
Column Syntax OID
dhcpv4SnoopingIfIndex
The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB'…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.14.1.1
dhcpv4SnoopingIfName
name of the interface
DisplayString .1.3.6.1.4.1.3902.3.102.33.14.1.2
dhcpv4SnoopingIfTrustStatus
The trust status of the interface,
dhcpv4-untrust(0): discard DHCPv4 adv/reply packet,
dhcpv4-trust(1): permit DHCPv4 adv/reply packet.
Enumeration
Enumerated Values:
0dhcpv4-untrust
1dhcpv4-trust
 .1.3.6.1.4.1.3902.3.102.33.14.1.3
dhcpv4SnoopingIfQuotaNum
The max quota number of the interface, it ranges from 1 to 2048.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.14.1.4
dhcpv4SnoopingIfCurUserNum
The current number of user under the interface who is online.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.14.1.5
dhcpv4SnoopingIfRemoteId
The string of remote-id indicated the server's MAC,
the string is not allowed to overstep 256 octets and all kinds of character can be used except ' '.
DisplayString .1.3.6.1.4.1.3902.3.102.33.14.1.6
dhcpv4SnoopingIfCircuitId
The string of the circuit-id describes a series of user's circuit information. User can be located definitely throughout it.
The string is not allowed to overstep 256 octets and all kinds of character can be used except…
DisplayString .1.3.6.1.4.1.3902.3.102.33.14.1.7
dhcpv4SnoopingIfPacketRate
This object indicates rate limit value for DHCP snooping
purpose. If the value of this object is 0, no rate limit is
applied for DHCP traffic at this interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.14.1.8
dhcpv4SnoopingIfSleepTime
This object indicates sleep limit value for DHCP snooping purpose.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.14.1.9

dhcpv4SnoopingPortVlanTable

table
.1.3.6.1.4.1.3902.3.102.33.15 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk dhcpv4SnoopingPortVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-DHCPSNOOPING-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-DHCPSNOOPING-MIB::dhcpv4SnoopingPortVlanTable' 
The table includes DHCPv4 snooping running parameters of each interface.
dhcpv4SnoopingPortVlanEntry row .1.3.6.1.4.1.3902.3.102.33.15.1
An entry includes DHCPv4 snooping running parameters of each interface.
Indexes
Column Syntax OID
dhcpv4SnoopingIfOptIndex
The index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB'…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.15.1.1
dhcpv4SnoopingIfOptName
Name of the interface.
DisplayString .1.3.6.1.4.1.3902.3.102.33.15.1.2
dhcpv4SnoopingIfOptVlanId
VLAN ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.15.1.3
dhcpv4SnoopingIfOptVlanPort
disable: the option82 function is unavailable,
enable: the option82 function is available based on Port+VLAN.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.102.33.15.1.4
dhcpv4SnoopingIfOptFormat
The format includes 4 types of format defined china-tel, dsl-forum, telenor, user-cfg.
Enumeration
Enumerated Values:
1china-tel
2dsl-forum
3telenor
4user-cfg
 .1.3.6.1.4.1.3902.3.102.33.15.1.5
dhcpv4SnoopingIfOptState
disable: the option82 can't be inserted under interface module,
enable: the option82 can be inserted based on interface module.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.102.33.15.1.6
dhcpv4SnoopingIfOptPolicy
The policy of user-cfg includes 3 types of way which are based on interface, uniform, VLAN.
Enumeration
Enumerated Values:
2keep
3replace
 .1.3.6.1.4.1.3902.3.102.33.15.1.7
dhcpv4SnoopingIfOptRemoteId
The string of remote-id indicated the server's MAC.
The string is not allowed to overstep 256 octets and all kinds of character can be used except ' '.
DisplayString .1.3.6.1.4.1.3902.3.102.33.15.1.8
dhcpv4SnoopingIfOptCircuitId
The string of the circuit-id describes a series of user's circuit information. User can be located definitely throughout it.
The string is not allowed to overstep 256 octets and all kinds of character can be used except…
DisplayString .1.3.6.1.4.1.3902.3.102.33.15.1.9

dhcpv4SnoopingDynamicBindingTable

table
.1.3.6.1.4.1.3902.3.102.33.16 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk dhcpv4SnoopingDynamicBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-DHCPSNOOPING-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-DHCPSNOOPING-MIB::dhcpv4SnoopingDynamicBindingTable' 
The binding state table containing the state of binding 
between source address and anchor.
dhcpv4SnoopingDynamicBindingEntry row .1.3.6.1.4.1.3902.3.102.33.16.1
MAC, VLAN and VPN is the key to locate the user-bind information, so it should be used in 'walk' action,
the rest of index can be used in 'get' action.
Indexes
Column Syntax OID
dhcpv4SnoopingDynamicBindingIfIndex
The unique value generated for the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.16.1.1
dhcpv4SnoopingDynamicBindingIfName
Name of the interface.
DisplayString .1.3.6.1.4.1.3902.3.102.33.16.1.2
dhcpv4SnoopingDynamicBindingIpAddress
The binding source IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.102.33.16.1.3
dhcpv4SnoopingDynamicBindingMacAddr
The binding source MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.3.102.33.16.1.4
dhcpv4SnoopingDynamicBindingState
The state of the binding entry.
Enumeration
Enumerated Values:
0start
1bound
 .1.3.6.1.4.1.3902.3.102.33.16.1.5
dhcpv4SnoopingDynamicBindingLifetime
The remaining lifetime of the entry.
If saviObjectsBindingType=static, a value of 2147483647
represents infinity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.16.1.6
dhcpv4SnoopingDynamicBindingVlanId
VLAN ID that the user belong to.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.16.1.7
dhcpv4SnoopingDynamicBindingVpls
Name of the VPLS.
DisplayString .1.3.6.1.4.1.3902.3.102.33.16.1.8

dhcpv4SnoopingStaticBindingTable

table
.1.3.6.1.4.1.3902.3.102.33.17 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk dhcpv4SnoopingStaticBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-DHCPSNOOPING-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-DHCPSNOOPING-MIB::dhcpv4SnoopingStaticBindingTable' 
The binding state table containing the state of binding 
between source address and anchor.
dhcpv4SnoopingStaticBindingEntry row .1.3.6.1.4.1.3902.3.102.33.17.1
MAC, VLAN and VPN is the key to locate the user-bind information, so it should be used in 'walk' action,
the rest of index can be used in 'get' action.
Indexes
Column Syntax OID
dhcpv4SnoopingStaticBindingIfIndex
The unique value generated for the interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.17.1.1
dhcpv4SnoopingStaticBindingIfName
Name of the interface.
DisplayString .1.3.6.1.4.1.3902.3.102.33.17.1.2
dhcpv4SnoopingStaticBindingIpAddress
The binding source IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.102.33.17.1.3
dhcpv4SnoopingStaticBindingMacAddr
The binding source MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.3.102.33.17.1.4
dhcpv4SnoopingStaticBindingState
The state of the binding entry.
Enumeration
Enumerated Values:
0start
1bound
 .1.3.6.1.4.1.3902.3.102.33.17.1.5
dhcpv4SnoopingStaticBindingLifetime
The remaining lifetime of the entry.
If saviObjectsBindingType=static, a value of 2147483647
represents infinity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.17.1.6
dhcpv4SnoopingStaticBindingVlanId
VLAN ID that the user belong to.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.17.1.7
dhcpv4SnoopingStaticBindingVpls
Name of the VPLS.
DisplayString .1.3.6.1.4.1.3902.3.102.33.17.1.8

dhcpv4SnoopingFileConfigTable

table
.1.3.6.1.4.1.3902.3.102.33.20 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk dhcpv4SnoopingFileConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-DHCPSNOOPING-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-DHCPSNOOPING-MIB::dhcpv4SnoopingFileConfigTable' 
The table includes DHCPv4 snooping file server address.
dhcpv4SnoopingFileConfigEntry row .1.3.6.1.4.1.3902.3.102.33.20.1
An entry includes DHCPv4 snooping file address.
Indexes
Column Syntax OID
dhcpv4SnoopingFileServerType
The type of the server.
Enumeration
Enumerated Values:
2tftp
3ftp
 .1.3.6.1.4.1.3902.3.102.33.20.1.1
dhcpv4SnoopingFileIpv6Flag
The IPv6 address flag.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.3.102.33.20.1.2
dhcpv4SnoopingFileVrf
VRF name.
DisplayString .1.3.6.1.4.1.3902.3.102.33.20.1.3
dhcpv4SnoopingFileURL
Server URL address.
DisplayString .1.3.6.1.4.1.3902.3.102.33.20.1.4