ZXR10-CONFIG-COPY-MIB
This MIB facilitates writing of configuration files
of an SNMP Agent running ZTE's ROS in the following
ways: to and from the net, copying running
configurations to startup configurations and
vice-versa, and copying a configuration
(running or startup) to and from the local file system.
- Source file
ZXR10-CONFIG-COPY-MIB- Last revised
- Identity
zxr10ConfigCopyMIB- Base OID
1.3.6.1.4.1.3902.3.202.1
Imported Objects
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the zte-ng MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZXR10-CONFIG-COPY-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZXR10-CONFIG-COPY-MIB::zxr10ConfigCopyMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-CONFIG-COPY-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-CONFIG-COPY-MIB::zxr10ConfigCopyMIB'
Objects (73)
Showing 73 of 73 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.3902 |
||
.1.3.6.1.4.1.3902.3 |
||
.1.3.6.1.4.1.3902.3.202 |
||
.1.3.6.1.4.1.3902.3.202.1 |
||
.1.3.6.1.4.1.3902.3.202.1.1 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.1 |
|
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.10 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.11 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.12 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.13 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.14 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.15 |
||
|
|
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.16 |
|
|
|
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.17 |
|
|
Integer32
|
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.18 |
|
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.19 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.2 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.20 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.21 |
||
|
percentInteger32
|
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.22 |
|
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.23 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.3 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.4 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.5 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.6 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.7 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.8 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.1.1.9 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.1 |
|
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.10 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.100 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.11 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.12 |
||
|
|
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.13 |
|
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.14 |
||
|
OctetString
|
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.15 |
|
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.16 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.17 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.2 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.3 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.4 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.5 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.6 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.7 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.8 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.2.1.9 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.1 |
|
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.10 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.11 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.12 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.13 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.14 |
||
|
|
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.15 |
|
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.16 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.17 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.2 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.3 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.4 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.5 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.50 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.6 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.7 |
||
.1.3.6.1.4.1.3902.3.202.1.1.1.3.1.8 |
||
.1.3.6.1.4.1.3902.3.202.1.2 |
||
.1.3.6.1.4.1.3902.3.202.1.2.1 |
||
.1.3.6.1.4.1.3902.3.202.1.2.2 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IPV6-TCrfc
- SNMPv2-CONFrfc
- ZXR10-CONFIG-COPY-MIBzte-ngselected
Type Definitions (8)
| Enumeration |
none(1)md5(2)sha1(3)The various types of file check.
|
|
| Enumeration |
unknown(1)localSourceFileUnavailable(2)connectionTimeout(3)insufficientMemory(4)noConfig(5)unsupportedProtocol(6)someConfigApplyFailed(7)localDestFileExist(8)fileChecksumErr(9)ftpLoginFail(10)localDestFileCreateErr(11)serverFileAccessErr(12)serverCancelTrance(13)insufficientStorage(14)vrfInvalid(15)unsupportedChecksumType(16)The reason a copy request failed.
|
|
| Enumeration |
tftp(1)ftp(2)The protocol file transfer protocol that should be used
to copy the configuration file over the network. If the config file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the implementation, and is not restricted to the protocols below. |
|
| Enumeration |
waiting(1)running(2)successful(3)failed(4)The state of a copy operation.
The description of each state is given below: waiting: only one copy request can run at any time. A newly activated copy request is placed in this state if another request has already been activated. running: this state signifies that the copy request is running. successsful: the state when a copy request is successfully completed. failed: the copy request was unsuccesful. |
|
| Enumeration |
networkFile(1)localFile(2)startupConfig(3)runningConfig(4)version(5)The various types of files on which a copy operation
can be performed. |
|
| Enumeration |
networkFile(1)localFile(2)The various types of files on which a copy operation
can be performed. |
|
| Enumeration |
errUnknown(17)vrfInvalid(18)localFileUnavailable(19)localDestFileExist(20)localFileOperateError(21)localFileOpenError(22)fileSizeExceedLimit(23)resourceAllocFail(24)createSshError(25)setSshError(26)fileIsTransmit(27)resourceNotEnough(28)sftpLoginFail(29)serverFileAccessErr(30)inputParaError(31)transmissionAborted(32)copyNoError(255)The reason a copy request failed.
|
|
| Enumeration |
unknown(1)vrfInvalid(2)serverIPAddressInvalid(3)localFileUnavailable(4)localDestFileExist(5)localSourceFileNotExist(6)localFileOperateError(7)remotFileOperateError(8)resourceNotAvailable(9)netWorkError(10)accessViolation(11)illegalOperation(12)unknownTransferID(13)insufficientStorage(14)someConfigApplyFailed(15)fileChecksumErr(16)unsupportedChecksumType(17)transmissionAborted(18)timeoutOccurred(19)noFailCause(255)The reason a copy request failed.
|
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
|
zxr10copyServerAddress (unresolved reference) zxr10copySrcFileName (unresolved reference) zxr10copyState (unresolved reference) zxr10copyTimeStarted (unresolved reference) zxr10copyTimeCompleted (unresolved reference) zxr10copyFailCause (unresolved reference) zxr10copyServerV6Address (unresolved reference)
|
.1.3.6.1.4.1.3902.3.202.1.2.1.1 |
A copyCompletion trap is sent at the completion
of a config-copy request. The copyFailCause is not instantiated, and hence not included in a trap, when the copyState is success. |
.1.3.6.1.4.1.3902.3.202.1.2.2.1 |
A copyCompletion trap is sent at the completion of a tftp
copy request. The copyFailCause is not instantiated, and hence not included in a trap, when the copyState is success. |