ZXR10-ACL-NEW-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
16
Rows
16
Columns
301
zxr10ACLv4ListTable
table
.1.3.6.1.4.1.3902.3.6000.602.2.1.1
·
1 row entry
·
1 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv4ListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv4ListTable'
IPv4 ACL Table
IPv4 ACL
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Name of an IPv4 access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.1.1.1 |
zxr10ACLv4RuleTable
table.1.3.6.1.4.1.3902.3.6000.602.2.1.2
·
1 row entry
·
36 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv4RuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv4RuleTable'
IPv4 ACL Rule Table
IPv4 ACL
effective leaf nodes:
A leaf node which is effective or not depends on the type of rule.
Rule types include standard type,ip type,tcp type,udp type,icmp type,
represented by zxr10ACLv4RuleIpProtocol in this t…
effective leaf nodes:
A leaf node which is effective or not depends on the type of rule.
Rule types include standard type,ip type,tcp type,udp type,icmp type,
represented by zxr10ACLv4RuleIpProtocol in this t…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of an IPv4 access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
ID of this rule
|
Integer32 Constraints: range: 1-2147483644 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
deny : Specify packets to reject
permit: Specify packets to forward |
AclPermitDeny Type Values:
Description: permit = 1,deny = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Source address
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Wildcard bits
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Destination address
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.6 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Destination wildcard bits
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.7 |
||||||||||||||||||||||||||||||||||||
|
<0-255> An IP protocol number
std standard rule type (65534) gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (1) igmp Internet Group Management Protocol (2) ip A… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.8 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.9 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-aut… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.10 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check zxr10ACLv4RuleSrcPortRange only when the value of zxr10ACLv4RuleSrcPortOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.11 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.12 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-aut… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.13 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check zxr10ACLv4RuleDestPortRange only when the value of zxr10ACLv4RuleDestPortOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.14 |
||||||||||||||||||||||||||||||||||||
|
Match established connections.
This is an optional node. This node is conflict with zxr10ACLv4RuleAckFlag and zxr10ACLv4RuleRstFlag. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.15 |
||||||||||||||||||||||||||||||||||||
|
ICMP type:
<0-255> valid value 65535 invalid value specific value: alternate-address Alternate address (6) echo Echo (ping, 8) echo-reply Echo reply (0) info… |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.16 |
||||||||||||||||||||||||||||||||||||
|
ICMP code:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.17 |
||||||||||||||||||||||||||||||||||||
|
Precedence level:
<0-7> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.18 |
||||||||||||||||||||||||||||||||||||
|
Type of service(ToS):
<0-15> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-15range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.19 |
||||||||||||||||||||||||||||||||||||
|
DSCP value:
<0-63> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.20 |
||||||||||||||||||||||||||||||||||||
|
Fragment enable or disable flag.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.21 |
||||||||||||||||||||||||||||||||||||
|
Match when the RST flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.22 |
||||||||||||||||||||||||||||||||||||
|
Match when the ACK flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.23 |
||||||||||||||||||||||||||||||||||||
|
Match when the FIN flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.24 |
||||||||||||||||||||||||||||||||||||
|
Match when the SYN flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.25 |
||||||||||||||||||||||||||||||||||||
|
Match when the PSH flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.26 |
||||||||||||||||||||||||||||||||||||
|
Match when the URG flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.27 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given ttl value ge Match only packets with a no lower ttl value le Match only packets with a no greater ttl value neq Match only packets with a… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.28 |
||||||||||||||||||||||||||||||||||||
|
The TTL value:
<1-255> valid value 0 invalid value Check this node when the value of zxr10ACLv4RuleTtlOpr is eq(1), ge(2),le(3) or neq(6). |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.29 |
||||||||||||||||||||||||||||||||||||
|
The TTL value Range:
<1-255>-<1-255> valid value 0 invalid value Check this node when the value of zxr10ACLv4RuleTtlOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.30 |
||||||||||||||||||||||||||||||||||||
|
Time range name (1-31 characters).
This is an optional node. |
SNMPv2-TCDisplayString Constraints: range: 0-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.31 |
||||||||||||||||||||||||||||||||||||
|
Source URL (1-95 characters)
If source Url is configured, zxr10ACLv4RuleSrcAddr and zxr10ACLv4RuleSrcWildcard are invalid. |
SNMPv2-TCDisplayString Constraints: range: 0-95Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.32 |
||||||||||||||||||||||||||||||||||||
|
Destination URL (1-95 characters)
If Destination Url is configured, zxr10ACLv4RuleDestAddr and zxr10ACLv4RuleDestWildcard are invalid. |
SNMPv2-TCDisplayString Constraints: range: 0-95Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.33 |
||||||||||||||||||||||||||||||||||||
|
Description for use (1-70 characters).
|
SNMPv2-TCDisplayString Constraints: range: 0-70Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.34 |
||||||||||||||||||||||||||||||||||||
|
Precedence range: <0-7>-<0-7>
Invalid value: 65535. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.35 |
||||||||||||||||||||||||||||||||||||
|
DSCP range: <0-63>-<0-63>
Invalid value: 65535. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.1.2.1.36 |
zxr10ACLv6ListTable
table.1.3.6.1.4.1.3902.3.6000.602.2.2.1
·
1 row entry
·
1 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv6ListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv6ListTable'
IPv6 ACL Table
IPv6 ACL
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Name of an IPv6 access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.1.1.1 |
zxr10ACLv6RuleTable
table.1.3.6.1.4.1.3902.3.6000.602.2.2.2
·
1 row entry
·
40 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv6RuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv6RuleTable'
IPv6 ACL Rule Table
IPv6 ACL
effective leaf nodes:
A leaf node which is effective or not depends on the type of rule.
Rule types include ip type,tcp type,udp type,icmp type, represented
by zxr10ACLv6RuleIpProtocol in this table.
Acco…
effective leaf nodes:
A leaf node which is effective or not depends on the type of rule.
Rule types include ip type,tcp type,udp type,icmp type, represented
by zxr10ACLv6RuleIpProtocol in this table.
Acco…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of an IPv6 access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
ID of this rule
|
Integer32 Constraints: range: 1-2147483644 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
deny : Specify packets to reject
permit: Specify packets to forward |
AclPermitDeny Type Values:
Description: permit = 1,deny = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
Flowlabel value:
<0-1048575> valid value 2147483647 invalid value This is an optional node. |
Integer32 Constraints: range: 0-1048575range: 2147483647-2147483647 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
<X:X::X:X> Source address
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
<0-128> Source Wildcard
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.6 |
||||||||||||||||||||||||||||||||||||
|
<X:X::X:X> Destination address
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.7 |
||||||||||||||||||||||||||||||||||||
|
<0-128> Destination Wildcard
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.8 |
||||||||||||||||||||||||||||||||||||
|
<0-255> An IP protocol number
gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (58) igmp Internet Group Management Protocol (2) ip Any internet protocol (65535) ospf … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.9 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.10 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-aut… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.11 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check zxr10ACLv6RuleSrcPortRange only when the value of zxr10ACLv6RuleSrcPortOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.12 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.13 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-aut… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.14 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check zxr10ACLv6RuleDestPortRange only when the value of zxr10ACLv6RuleDestPortOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.15 |
||||||||||||||||||||||||||||||||||||
|
Match established connections.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.16 |
||||||||||||||||||||||||||||||||||||
|
Match when the RST flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.17 |
||||||||||||||||||||||||||||||||||||
|
Match when the ACK flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.18 |
||||||||||||||||||||||||||||||||||||
|
Match when the FIN flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.19 |
||||||||||||||||||||||||||||||||||||
|
Match when the SYN flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.20 |
||||||||||||||||||||||||||||||||||||
|
Match when the PSH flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.21 |
||||||||||||||||||||||||||||||||||||
|
Match when the URG flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.22 |
||||||||||||||||||||||||||||||||||||
|
ICMP type:
<0-255> valid value 65535 invalid value specific value: destination-unreachable Destination unreachable (1) echo-reply Echo reply (129) echo-request Ec… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.23 |
||||||||||||||||||||||||||||||||||||
|
ICMP code:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.24 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.25 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.26 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.27 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.28 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.29 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.30 |
||||||||||||||||||||||||||||||||||||
|
DSCP value:
<0-63> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.31 |
||||||||||||||||||||||||||||||||||||
|
Traffic Class value:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.32 |
||||||||||||||||||||||||||||||||||||
|
Time range name (1-31 characters).
This is an optional node. |
SNMPv2-TCDisplayString Constraints: range: 0-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.33 |
||||||||||||||||||||||||||||||||||||
|
Source URL (1-95 characters)
If source Url is configured, zxr10ACLv6RuleSrcAddr and zxr10ACLv6RuleSrcWildcard are invalid. |
SNMPv2-TCDisplayString Constraints: range: 0-95Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.34 |
||||||||||||||||||||||||||||||||||||
|
Destination URL (1-95 characters)
If Destination Url is configured, zxr10ACLv6RuleDestAddr and zxr10ACLv6RuleDestWildcard are invalid. |
SNMPv2-TCDisplayString Constraints: range: 0-95Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.35 |
||||||||||||||||||||||||||||||||||||
|
This flag indicates the way of configuring IPv6 source address mask,
such as zxr10ACLv6RuleSrcWildcard, zxr10ACLv6RuleSrcWildcardBits. If this flag is valid, IPv6 source address mask is configured by wildcard bits,(e.g… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.36 |
||||||||||||||||||||||||||||||||||||
|
<X:X::X:X> Source address wildcard bits
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.37 |
||||||||||||||||||||||||||||||||||||
|
This flag indicates the way of configuring IPv6 destination address
mask,such as zxr10ACLv6RuleDestWildcard,zxr10ACLv6RuleDestWildcardBits. If this flag is valid, IPv6 destination address mask is configured by wildcar… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.38 |
||||||||||||||||||||||||||||||||||||
|
<X:X::X:X> Destination address wildcard bits
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.39 |
||||||||||||||||||||||||||||||||||||
|
Description for use (1-70 characters).
|
SNMPv2-TCDisplayString Constraints: range: 0-70Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.2.2.1.40 |
zxr10ACLLinkListTable
table.1.3.6.1.4.1.3902.3.6000.602.2.3.1
·
1 row entry
·
1 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLLinkListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLLinkListTable'
Link ACL
Link ACL
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Name of a link access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.1.1.1 |
zxr10ACLLinkRuleTable
table.1.3.6.1.4.1.3902.3.6000.602.2.3.2
·
1 row entry
·
33 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLLinkRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLLinkRuleTable'
Link ACL Rule Table
Link ACL
effective leaf nodes:
All of the leaf nodes are effective:
zxr10ACLLinkRuleAclName,
zxr10ACLLinkRuleRuleID,
zxr10ACLLinkRulePermitDeny,
…
effective leaf nodes:
All of the leaf nodes are effective:
zxr10ACLLinkRuleAclName,
zxr10ACLLinkRuleRuleID,
zxr10ACLLinkRulePermitDeny,
…
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Name of a link access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.1 |
||||
|
ID of this rule
|
Integer32 Constraints: range: 1-2147483644 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.2 |
||||
|
deny : Specify packets to reject
permit: Specify packets to forward |
AclPermitDeny Type Values:
Description: permit = 1,deny = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.3 |
||||
|
Link protocal:
<1536-65535> valid value 65536 invalid value This is an optional node. |
Integer32 Constraints: range: 1536-65536 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.4 |
||||
|
<xxxx.xxxx.xxxx> Source MAC address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.5 |
||||
|
<xxxx.xxxx.xxxx> Source MAC wildcard
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.6 |
||||
|
<xxxx.xxxx.xxxx> Destination MAC address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.7 |
||||
|
<xxxx.xxxx.xxxx> Destination MAC wildcard
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.8 |
||||
|
Value of inner cos:
<0-7> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.9 |
||||
|
Value of outer cos:
<0-7> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.10 |
||||
|
Value of inner vlan
<1-4094> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 1-4094range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.11 |
||||
|
Value of outer vlan
<1-4094> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 1-4094range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.12 |
||||
|
Range of inner vlan
<1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.13 |
||||
|
Range of outer vlan
<1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.14 |
||||
|
Time range name (1-31 characters).
This is an optional node. |
SNMPv2-TCDisplayString Constraints: range: 0-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.15 |
||||
|
Match if source MAC address range is configured.
When this is valid, zxr10ACLLinkRuleSrcMAC and zxr10ACLLinkRuleSrcMACWildcard are invalid, zxr10ACLLinkRuleSrcMACRg1Min and zxr10ACLLinkRuleSrcMACRg1Max are valid. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.16 |
||||
|
<xxxx.xxxx.xxxx>
Lower limit of first source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.17 |
||||
|
<xxxx.xxxx.xxxx>
Upper limit of first source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.18 |
||||
|
Match if second source MAC address range is configured.
When this is valid, zxr10ACLLinkRuleSrcMAC and zxr10ACLLinkRuleSrcMACWildcard are invalid, zxr10ACLLinkRuleSrcMACRg2Min and zxr10ACLLinkRuleSrcMACRg2Max are vali… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.19 |
||||
|
<xxxx.xxxx.xxxx>
Lower limit of second source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.20 |
||||
|
<xxxx.xxxx.xxxx>
Upper limit of second source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.21 |
||||
|
Match if destination MAC address range is configured.
When this is valid, zxr10ACLLinkRuleDestMAC and zxr10ACLLinkRuleDestMACWildcard are invalid, zxr10ACLLinkRuleDestMACRg1Min and zxr10ACLLinkRuleDestMACRg1Max are va… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.22 |
||||
|
<xxxx.xxxx.xxxx>
Lower limit of first destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.23 |
||||
|
<xxxx.xxxx.xxxx>
Upper limit of first destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.24 |
||||
|
Match if second destination MAC address range is configured.
When this is valid, zxr10ACLLinkRuleDestMAC and zxr10ACLLinkRuleDestMACWildcard are invalid, zxr10ACLLinkRuleDestMACRg2Min and zxr10ACLLinkRuleDestMACRg2Max… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.25 |
||||
|
<xxxx.xxxx.xxxx>
Lower limit of second destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.26 |
||||
|
<xxxx.xxxx.xxxx>
Upper limit of second destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.27 |
||||
|
Description for use (1-70 characters).
|
SNMPv2-TCDisplayString Constraints: range: 0-70Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.28 |
||||
|
Link protocal mask:
<0-65535> valid value 65536 invalid value This is an optional node. |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.29 |
||||
|
Range of inner CoS:
<0-7>-<0-7> valid value 65535 invalid value This is an optional node. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.30 |
||||
|
Range of outer CoS:
<0-7>-<0-7> valid value 65535 invalid value This is an optional node. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.31 |
||||
|
Destination service access point:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.32 |
||||
|
Source service access point:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.3.2.1.33 |
zxr10ACLv4MixListTable
table.1.3.6.1.4.1.3902.3.6000.602.2.4.1
·
1 row entry
·
1 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv4MixListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv4MixListTable'
IPv4 Mixed ACL Table
IPv4Mix ACL
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Name of an IPv4 mixed access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.1.1.1 |
zxr10ACLv4MixRuleTable
table.1.3.6.1.4.1.3902.3.6000.602.2.4.2
·
1 row entry
·
54 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv4MixRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv4MixRuleTable'
IPv4 Mixed ACL Rule Table
IPv4Mix ACL
effective leaf nodes:
A leaf node which is effective or not depends on the type of rule.
Rule types include standard type, ip type, tcp type, udp type ,icmp
type , represented by zxr10ACLv4RuleIpProtocol…
effective leaf nodes:
A leaf node which is effective or not depends on the type of rule.
Rule types include standard type, ip type, tcp type, udp type ,icmp
type , represented by zxr10ACLv4RuleIpProtocol…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of an IPv4 mixed access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
ID of this rule
|
Integer32 Constraints: range: 1-2147483644 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
deny : Specify packets to reject
permit: Specify packets to forward |
AclPermitDeny Type Values:
Description: permit = 1,deny = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
zxr10ACLv4MixRuleLinkProtocolobsolete
Link protocal:
<0-65535> valid value 65536 invalid value This is an optional node. |
Integer32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx> Source MAC address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx> Source MAC wildcard
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.6 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx> Destination MAC address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.7 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx> Destination MAC wildcard
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.8 |
||||||||||||||||||||||||||||||||||||
|
Value of inner cos:
<0-7> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.9 |
||||||||||||||||||||||||||||||||||||
|
Value of outer cos:
<0-7> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.10 |
||||||||||||||||||||||||||||||||||||
|
Value of inner vlan
<1-4094> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 1-4094range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.11 |
||||||||||||||||||||||||||||||||||||
|
Value of outer vlan
<1-4094> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 1-4094range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.12 |
||||||||||||||||||||||||||||||||||||
|
Range of inner vlan
<1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.13 |
||||||||||||||||||||||||||||||||||||
|
Range of outer vlan
<1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.14 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Source address
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.15 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Wildcard bits
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.16 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Destination address
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.17 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Destination wildcard bits
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.18 |
||||||||||||||||||||||||||||||||||||
|
<0-255> An IP protocol number
std Standard rule type (65534) gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (1) igmp Internet Group Management Protocol (2) ip A… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.19 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.20 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-aut… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.21 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check zxr10ACLv4MixRuleSrcPortRange only when the value of zxr10ACLv4MixRuleSrcPortOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.22 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.23 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-a… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.24 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check zxr10ACLv4MixRuleDestPortRange only when the value of zxr10ACLv4MixRuleDestPortOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.25 |
||||||||||||||||||||||||||||||||||||
|
Match established connections.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.26 |
||||||||||||||||||||||||||||||||||||
|
ICMP type:
<0-255> valid value 65535 invalid value specific value: alternate-address Alternate address (6) echo Echo (ping, 8) echo-reply Echo reply (0) info… |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.27 |
||||||||||||||||||||||||||||||||||||
|
ICMP code:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.28 |
||||||||||||||||||||||||||||||||||||
|
Precedence level:
<0-7> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.29 |
||||||||||||||||||||||||||||||||||||
|
Type of service(ToS):
<0-15> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-15range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.30 |
||||||||||||||||||||||||||||||||||||
|
DSCP value:
<0-63> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.31 |
||||||||||||||||||||||||||||||||||||
|
Fragment enable or disable flag.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.32 |
||||||||||||||||||||||||||||||||||||
|
Match when the RST flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.33 |
||||||||||||||||||||||||||||||||||||
|
Match when the ACK flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.34 |
||||||||||||||||||||||||||||||||||||
|
Match when the FIN flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.35 |
||||||||||||||||||||||||||||||||||||
|
Match when the SYN flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.36 |
||||||||||||||||||||||||||||||||||||
|
Match when the PSH flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.37 |
||||||||||||||||||||||||||||||||||||
|
Match when the URG flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.38 |
||||||||||||||||||||||||||||||||||||
|
Time range name (1-31 characters).
This is an optional node. |
SNMPv2-TCDisplayString Constraints: range: 0-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.39 |
||||||||||||||||||||||||||||||||||||
|
Match if source MAC address range is configured.
When this is valid, zxr10ACLv4MixRuleSrcMAC and zxr10ACLv4MixRuleSrcMACWildcard are invalid, zxr10ACLv4MixRuleSrcMACRg1Min and zxr10ACLv4MixRuleSrcMACRg1Max are valid. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.40 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Lower limit of first source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.41 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Upper limit of first source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.42 |
||||||||||||||||||||||||||||||||||||
|
Match if second source MAC address range is configured.
When this is valid, zxr10ACLv4MixRuleSrcMAC and zxr10ACLv4MixRuleSrcMACWildcard are invalid, zxr10ACLv4MixRuleSrcMACRg2Min and zxr10ACLv4MixRuleSrcMACRg2Max are … |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.43 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Lower limit of second source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.44 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Upper limit of second source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.45 |
||||||||||||||||||||||||||||||||||||
|
Match if destination MAC address range is configured.
When this is valid, zxr10ACLv4MixRuleDestMAC and zxr10ACLv4MixRuleDestMACWildcard are invalid, zxr10ACLv4MixRuleDestMACRg1Min and zxr10ACLv4MixRuleDestMACRg1Max a… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.46 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Lower limit of first destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.47 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Upper limit of first destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.48 |
||||||||||||||||||||||||||||||||||||
|
Match if second destination MAC address range is configured.
When this is valid, zxr10ACLv4MixRuleDestMAC and zxr10ACLv4MixRuleDestMACWildcard are invalid, zxr10ACLv4MixRuleDestMACRg2Min and zxr10ACLv4MixRuleDestMACRg… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.49 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Lower limit of second destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.50 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Upper limit of second destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.51 |
||||||||||||||||||||||||||||||||||||
|
Link protocal:
<1536-65535> valid value 65536 invalid value This is an optional node. |
Integer32 Constraints: range: 1536-65536 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.52 |
||||||||||||||||||||||||||||||||||||
|
Destination service access point:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.53 |
||||||||||||||||||||||||||||||||||||
|
Source service access point:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.4.2.1.54 |
zxr10ACLv6MixListTable
table.1.3.6.1.4.1.3902.3.6000.602.2.5.1
·
1 row entry
·
1 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv6MixListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv6MixListTable'
IPv6 Mixed ACL Table
IPv6 Mixed ACL
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Name of an IPv6 Mixed access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.1.1.1 |
zxr10ACLv6MixRuleTable
table.1.3.6.1.4.1.3902.3.6000.602.2.5.2
·
1 row entry
·
63 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv6MixRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv6MixRuleTable'
IPv6 Mixed ACL Rule Table
IPv6 Mixed ACL
effective leaf nodes:
A leaf node which is effective or not depends on the type of rule.
Rule types include standard type, ip type, tcp type, udp type ,icmp
type , represented by zxr10ACLv4RuleIpProto…
effective leaf nodes:
A leaf node which is effective or not depends on the type of rule.
Rule types include standard type, ip type, tcp type, udp type ,icmp
type , represented by zxr10ACLv4RuleIpProto…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of an IPv6 Mixed access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
ID of this rule
|
Integer32 Constraints: range: 1-2147483644 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
deny : Specify packets to reject
permit: Specify packets to forward |
AclPermitDeny Type Values:
Description: permit = 1,deny = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
zxr10ACLv6MixRuleLinkProtocolobsolete
Link protocal:
<0-65535> valid value 65536 invalid value This is an optional node. |
Integer32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx> Source MAC address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx> Source MAC wildcard
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.6 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx> Destination MAC address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.7 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx> Destination MAC wildcard
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.8 |
||||||||||||||||||||||||||||||||||||
|
Value of inner cos:
<0-7> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.9 |
||||||||||||||||||||||||||||||||||||
|
Value of outer cos:
<0-7> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.10 |
||||||||||||||||||||||||||||||||||||
|
Value of inner vlan
<1-4094> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 1-4094range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.11 |
||||||||||||||||||||||||||||||||||||
|
Value of outer vlan
<1-4094> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 1-4094range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.12 |
||||||||||||||||||||||||||||||||||||
|
Range of inner vlan
<1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.13 |
||||||||||||||||||||||||||||||||||||
|
Range of outer vlan
<1-4094>-<1-4094> valid value 0 invalid value This is an optional node. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.14 |
||||||||||||||||||||||||||||||||||||
|
Flowlabel value:
<0-1048575> valid value 2147483647 invalid value This is an optional node. |
Integer32 Constraints: range: 0-1048575range: 2147483647-2147483647 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.15 |
||||||||||||||||||||||||||||||||||||
|
X:X::X:X Source address
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.16 |
||||||||||||||||||||||||||||||||||||
|
<0-128> Source Wildcard
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.17 |
||||||||||||||||||||||||||||||||||||
|
X:X::X:X Destination address
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.18 |
||||||||||||||||||||||||||||||||||||
|
<0-128> Destination Wildcard
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.19 |
||||||||||||||||||||||||||||||||||||
|
<0-255> An IP protocol number
gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol (58) igmp Internet Group Management Protocol (2) ip Any internet protocol (65535) ospf … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.20 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.21 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-au… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.22 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check zxr10ACLv6MixRuleSrcPortRange only when the value of zxr10ACLv6MixRuleSrcPortOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.23 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.24 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Network time protocol (123) pim-au… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.25 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check zxr10ACLv6MixRuleDestPortRange only when the value of zxr10ACLv6MixRuleDestPortOpr is range(7). |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.26 |
||||||||||||||||||||||||||||||||||||
|
Match established connections.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.27 |
||||||||||||||||||||||||||||||||||||
|
Match when the RST flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.28 |
||||||||||||||||||||||||||||||||||||
|
Match when the ACK flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.29 |
||||||||||||||||||||||||||||||||||||
|
Match when the FIN flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.30 |
||||||||||||||||||||||||||||||||||||
|
Match when the SYN flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.31 |
||||||||||||||||||||||||||||||||||||
|
Match when the PSH flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.32 |
||||||||||||||||||||||||||||||||||||
|
Match when the URG flag set or not.
This is an optional node. invalid value: (65535) |
AclTcpFlagType Type Values:
Description: plus(+) = 1,minus(-) = 2,unset = 65535. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.33 |
||||||||||||||||||||||||||||||||||||
|
ICMP type:
<0-255> valid value 65535 invalid value specific value: destination-unreachable Destination unreachable (1) echo-reply Echo reply (129) echo-request Ec… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.34 |
||||||||||||||||||||||||||||||||||||
|
ICMP code:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.35 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.36 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.37 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.38 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.39 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.40 |
||||||||||||||||||||||||||||||||||||
|
Match if the specify IPv6 header is present.
This is an optional node. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.41 |
||||||||||||||||||||||||||||||||||||
|
DSCP value:
<0-63> valid value 255 invalid value This is an optional node. |
Integer32 Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.42 |
||||||||||||||||||||||||||||||||||||
|
Traffic Class value:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.43 |
||||||||||||||||||||||||||||||||||||
|
Time range name (1-31 characters).
This is an optional node. |
SNMPv2-TCDisplayString Constraints: range: 0-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.44 |
||||||||||||||||||||||||||||||||||||
|
Match if source MAC address range is configured.
When this is valid, zxr10ACLv6MixRuleSrcMAC and zxr10ACLv6MixRuleSrcMACWildcard are invalid, zxr10ACLv6MixRuleSrcMACRg1Min and zxr10ACLv6MixRuleSrcMACRg1Max are valid. |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.45 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Lower limit of first source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.46 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Upper limit of first source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.47 |
||||||||||||||||||||||||||||||||||||
|
Match if second source MAC address range is configured.
When this is valid, zxr10ACLv6MixRuleSrcMAC and zxr10ACLv6MixRuleSrcMACWildcard are invalid, zxr10ACLv6MixRuleSrcMACRg2Min and zxr10ACLv6MixRuleSrcMACRg2Max are … |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.48 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Lower limit of second source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.49 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Upper limit of second source MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.50 |
||||||||||||||||||||||||||||||||||||
|
Match if destination MAC address range is configured.
When this is valid, zxr10ACLv6MixRuleDestMAC and zxr10ACLv6MixRuleDestMACWildcard are invalid, zxr10ACLv6MixRuleDestMACRg1Min and zxr10ACLv6MixRuleDestMACRg1Max are… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.51 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Lower limit of first destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.52 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Upper limit of first destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.53 |
||||||||||||||||||||||||||||||||||||
|
Match if second destination MAC address range is configured.
When this is valid, zxr10ACLv6MixRuleDestMAC and zxr10ACLv6MixRuleDestMACWildcard are invalid, zxr10ACLv6MixRuleDestMACRg2Min and zxr10ACLv6MixRuleDestMACRg… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.54 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Lower limit of second destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.55 |
||||||||||||||||||||||||||||||||||||
|
<xxxx.xxxx.xxxx>
Upper limit of second destination MAC address range |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.56 |
||||||||||||||||||||||||||||||||||||
|
Link protocal:
<1536-65535> valid value 65536 invalid value This is an optional node. |
Integer32 Constraints: range: 1536-65536 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.57 |
||||||||||||||||||||||||||||||||||||
|
This flag indicates the way of configuring IPv6 source address mask,
such as zxr10ACLv6MixRuleSrcWildcard, zxr10ACLv6MixRuleSrcWildcardBits. If this flag is valid, IPv6 source address mask is configured by wildcard bit… |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.58 |
||||||||||||||||||||||||||||||||||||
|
<X:X::X:X> Source address wildcard bits
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.59 |
||||||||||||||||||||||||||||||||||||
|
This flag indicates the way of configuring IPv6 destination address
mask, such as zxr10ACLv6MixRuleDestWildcard, zxr10ACLv6MixRuleDstWildcardBits. If this flag is valid, IPv6 destination address mask is configured by … |
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.60 |
||||||||||||||||||||||||||||||||||||
|
<X:X::X:X> Destination address wildcard bits
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.61 |
||||||||||||||||||||||||||||||||||||
|
Destination service access point:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.62 |
||||||||||||||||||||||||||||||||||||
|
Source service access point:
<0-255> valid value 65535 invalid value This is an optional node. |
Integer32 Constraints: range: 0-255range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.5.2.1.63 |
.1.3.6.1.4.1.3902.3.6000.602.2.6.1
·
1 row entry
·
1 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLUsrProtocolListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLUsrProtocolListTable'
User Protocol ACL
User Protocol ACL
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Name of a User Protocol access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.6.1.1.1 |
.1.3.6.1.4.1.3902.3.6000.602.2.6.2
·
1 row entry
·
6 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLUsrProtocolRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLUsrProtocolRuleTable'
User Protocol Rule Table
User Protocol ACL
effective leaf nodes:
All of the leaf nodes are effective:
zxr10ACLUsrProtocolRuleAclName,
zxr10ACLUsrProtocolRuleRuleID,
zxr10ACLUs…
effective leaf nodes:
All of the leaf nodes are effective:
zxr10ACLUsrProtocolRuleAclName,
zxr10ACLUsrProtocolRuleRuleID,
zxr10ACLUs…
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Name of a User Protocol access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.1 |
||||
|
ID of this rule
|
Integer32 Constraints: range: 1-2147483644 |
.1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.2 |
||||
|
Ether type of User Protocol:
<0-65535> valid value 65536 invalid value |
Integer32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.3 |
||||
|
<xxxx.xxxx.xxxx> Destination MAC address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.4 |
||||
|
<xxxx.xxxx.xxxx> Destination MAC address wildcard
This is an optional node. |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.5 |
||||
|
Match any ethernet type if the value is valid.
|
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.6.2.1.6 |
zxr10ACLUsrDefListTable
table.1.3.6.1.4.1.3902.3.6000.602.2.7.1
·
1 row entry
·
1 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLUsrDefListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLUsrDefListTable'
User defined ACL
User defined ACL
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Name of a User defined access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.1.1.1 |
zxr10ACLUsrDefRuleTable
table.1.3.6.1.4.1.3902.3.6000.602.2.7.2
·
1 row entry
·
20 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLUsrDefRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLUsrDefRuleTable'
User defined Rule Table
User defined ACL
effective leaf nodes:
All of the leaf nodes are effective:
zxr10ACLUsrDefRuleAclName,
zxr10ACLUsrDefRuleRuleID,
zxr10ACLUsrDefRulePer…
effective leaf nodes:
All of the leaf nodes are effective:
zxr10ACLUsrDefRuleAclName,
zxr10ACLUsrDefRuleRuleID,
zxr10ACLUsrDefRulePer…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of a User defined access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.1 |
||||||||||||||||||||||||||||||||||
|
ID of this rule
|
Integer32 Constraints: range: 1-2147483644 |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.2 |
||||||||||||||||||||||||||||||||||
|
deny : Specify packets to reject
permit: Specify packets to forward |
AclPermitDeny Type Values:
Description: permit = 1,deny = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.3 |
||||||||||||||||||||||||||||||||||
|
ethernet2 Ethernet version II frame
llc-snap LLC/SNAP frame in IEEE802.3 sap SAP frame in IEEE802.3 any Any frame |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.4 |
||||||||||||||||||||||||||||||||||
|
untag Status with no VLAN tag
single-tag Status with VLAN tag double-tag Status with outer and inner VLAN tag any Any status with VLAN tag |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.5 |
||||||||||||||||||||||||||||||||||
|
ip4-hdr-only Segment of only IPv4 header
ip6-hdr-only Segment of only IPv6 header ip6-fragment Segment of IPv6 fragment ip4-over-ip4 Segment of IPv4 datagram over IPv4 ip6… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.6 |
||||||||||||||||||||||||||||||||||
|
Any rule segment.
|
AclValidOrNot Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.7 |
||||||||||||||||||||||||||||||||||
|
First offset from packet head (2+4*n, n = 0, 1, 2, ...)
2-126 valid value 65535 invalid value. |
Integer32 Constraints: range: 2-126range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.8 |
||||||||||||||||||||||||||||||||||
|
First user defined hexadecimal string(must be 10 characters)
|
SNMPv2-TCDisplayString Constraints: range: 0-0range: 10-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.9 |
||||||||||||||||||||||||||||||||||
|
First user defined hexadecimal string mask(must be 10 characters)
|
SNMPv2-TCDisplayString Constraints: range: 0-0range: 10-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.10 |
||||||||||||||||||||||||||||||||||
|
Second offset from packet head (2+4*n, n = 0, 1, 2, ...)
2-126 valid value 65535 invalid value. |
Integer32 Constraints: range: 2-126range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.11 |
||||||||||||||||||||||||||||||||||
|
Second user defined hexadecimal string(must be 10 characters)
|
SNMPv2-TCDisplayString Constraints: range: 0-0range: 10-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.12 |
||||||||||||||||||||||||||||||||||
|
Second user defined hexadecimal string mask(must be 10 characters)
|
SNMPv2-TCDisplayString Constraints: range: 0-0range: 10-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.13 |
||||||||||||||||||||||||||||||||||
|
Third offset from packet head (2+4*n, n = 0, 1, 2, ...)
2-126 valid value 65535 invalid value. |
Integer32 Constraints: range: 2-126range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.14 |
||||||||||||||||||||||||||||||||||
|
Third user defined hexadecimal string(must be 10 characters)
|
SNMPv2-TCDisplayString Constraints: range: 0-0range: 10-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.15 |
||||||||||||||||||||||||||||||||||
|
Third user defined hexadecimal string mask(must be 10 characters)
|
SNMPv2-TCDisplayString Constraints: range: 0-0range: 10-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.16 |
||||||||||||||||||||||||||||||||||
|
Fourth offset from packet head (2+4*n, n = 0, 1, 2, ...)
2-126 valid value 65535 invalid value. |
Integer32 Constraints: range: 2-126range: 65535-65535 |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.17 |
||||||||||||||||||||||||||||||||||
|
Fourth user defined hexadecimal string(must be 10 characters)
|
SNMPv2-TCDisplayString Constraints: range: 0-0range: 10-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.18 |
||||||||||||||||||||||||||||||||||
|
Fourth user defined hexadecimal string mask(must be 10 characters)
|
SNMPv2-TCDisplayString Constraints: range: 0-0range: 10-10Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.19 |
||||||||||||||||||||||||||||||||||
|
Time range name (1-31 characters).
This is an optional node. |
SNMPv2-TCDisplayString Constraints: range: 0-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.7.2.1.20 |
zxr10ACLv4VxlanListTable
table.1.3.6.1.4.1.3902.3.6000.602.2.8.1
·
1 row entry
·
3 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv4VxlanListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv4VxlanListTable'
IPv4 VXLAN ACL
IPv4 VXLAN ACL
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of an IPv4 VXLAN access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.1 |
||||||||||||
|
If the flag is setted with valid,
this acl can not be configed with VNI. If the flag is setted with invalid, this acl can be configed with VNI. |
AclValidOrNotr/w Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.2 |
||||||||||||
|
RowStatus
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.3902.3.6000.602.2.8.1.1.100 |
zxr10ACLv4VxlanRuleTable
table.1.3.6.1.4.1.3902.3.6000.602.2.8.2
·
1 row entry
·
39 columns
Uses the zte-ng variant from
Command help
/opt/observium/mibs/zte-ng.
Walk zxr10ACLv4VxlanRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-NEW-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-NEW-MIB::zxr10ACLv4VxlanRuleTable'
IPv4 VXLAN ACL Rule Table
IPv4 VXLAN ACL
effective leaf nodes:
All of the leaf nodes are effective:
conflict leaf nodes:
These 3 nodes below conflict, can only config one at most:
zxr10ACLv4VxlanRulePr…
effective leaf nodes:
All of the leaf nodes are effective:
conflict leaf nodes:
These 3 nodes below conflict, can only config one at most:
zxr10ACLv4VxlanRulePr…
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of an IPv4 VXLAN access-list (1-31 characters)
|
SNMPv2-TCDisplayString Constraints: range: 1-31Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.1 |
||||||||||||||||||||||||||||||||||||
|
ID of this rule
|
Integer32 Constraints: range: 1-2147483644 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.2 |
||||||||||||||||||||||||||||||||||||
|
The node has two values:
1. deny means that packets can not be handled. 2. permit means that packets can be handled. |
AclPermitDenyr/w Type Values:
Description: permit = 1,deny = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.3 |
||||||||||||||||||||||||||||||||||||
|
If the flag is setted with valid,
the inner infomation is meaningful. If the flag is setted with invalid, the inner infomation is not meaningful. |
AclValidOrNotr/w Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.4 |
||||||||||||||||||||||||||||||||||||
|
<0-255> An IP protocol number
gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol (2) ip Any internet protocol(65535) ospf O… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.5 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Source address
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.6 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Wildcard bits
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.7 |
||||||||||||||||||||||||||||||||||||
|
If the flag is setted with valid,
the rule is effective to any source address. |
AclValidOrNotr/w Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.8 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Destination address
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.9 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Destination wildcard bits
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.10 |
||||||||||||||||||||||||||||||||||||
|
If the flag is setted with valid,
the rule is effective to any destination address. |
AclValidOrNotr/w Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.11 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.12 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) nt… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.13 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check this node only when the value of zxr10ACLv4RuleSrcPortOprIn is range(7). |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.14 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.15 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.16 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check this node only when the value of zxr10ACLv4VxlanRuleDestPortOprIn is range(7). |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.17 |
||||||||||||||||||||||||||||||||||||
|
Precedence level:
<0-7> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRuleTOSIn and zxr10ACLv4VxlanRuleDSCPIn. |
Integer32r/w Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.18 |
||||||||||||||||||||||||||||||||||||
|
Type of service(ToS):
<0-15> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceIn and zxr10ACLv4VxlanRuleDSCPIn. |
Integer32r/w Constraints: range: 0-15range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.19 |
||||||||||||||||||||||||||||||||||||
|
DSCP value:
<0-63> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceIn and zxr10ACLv4VxlanRuleTOSIn |
Integer32r/w Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.20 |
||||||||||||||||||||||||||||||||||||
|
VXLAN id.
Range is 1 to 16777215. 0 is invalid value. |
Integer32r/w Constraints: range: 0-16777215 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.21 |
||||||||||||||||||||||||||||||||||||
|
If the flag is setted with valid,
the outer infomatino is meaningful. If the flag is setted with invalid, the outer infomation is not meaningful. |
AclValidOrNotr/w Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.22 |
||||||||||||||||||||||||||||||||||||
|
udp User Datagram Protocol(17)
65533 Invalid value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.23 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Source address
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.24 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Wildcard bits
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.25 |
||||||||||||||||||||||||||||||||||||
|
If the flag is setted with valid,
the rule is effective to any dest address. |
AclValidOrNotr/w Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.26 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Destination address
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.27 |
||||||||||||||||||||||||||||||||||||
|
A.B.C.D Destination wildcard bits
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.28 |
||||||||||||||||||||||||||||||||||||
|
If the flag is setted with valid,
the rule is effective to any destination address. |
AclValidOrNotr/w Type Values:
Description: valid = 1,invalid = 2. |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.29 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.30 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.31 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check this node only when the value of zxr10ACLv4RuleSrcPortOprIn is range(7). |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.32 |
||||||||||||||||||||||||||||||||||||
|
This is an optional node.
eq Match only packets on a given port number ge Match only packets with a no lower port number le Match only packets with a no greater port number range Match only packet o… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.33 |
||||||||||||||||||||||||||||||||||||
|
<0-65535> Port number
UDP protocol contains known port as follows: bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.34 |
||||||||||||||||||||||||||||||||||||
|
Port range: <0-65535>-<0-65535>
Check this node only when the value of zxr10ACLv4VxlanRuleDestPortOprOut is range(7). |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.35 |
||||||||||||||||||||||||||||||||||||
|
Precedence level:
<0-7> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRuleTOSOut and zxr10ACLv4VxlanRuleDSCPOut. |
Integer32r/w Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.36 |
||||||||||||||||||||||||||||||||||||
|
Type of service(ToS):
<0-15> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceOut and zxr10ACLv4VxlanRuleDSCPOut. |
Integer32r/w Constraints: range: 0-15range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.37 |
||||||||||||||||||||||||||||||||||||
|
DSCP value:
<0-63> valid value 255 invalid value This is an optional node. This node conflicts with zxr10ACLv4VxlanRulePrecedenceOut and zxr10ACLv4VxlanRuleTOSOut. |
Integer32r/w Constraints: range: 0-63range: 255-255 |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.38 |
||||||||||||||||||||||||||||||||||||
|
RowStatus
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.3902.3.6000.602.2.8.2.1.100 |