ZXR10-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
165
.1.3.6.1.4.1.3902.3.1100.1.1 · 1 row entry · 34 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IPv4ACLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-MIB::zxr10IPv4ACLTable'
IPv4 ACL Table
zxr10IPv4ACLEntry row .1.3.6.1.4.1.3902.3.1100.1.1.1
IPv4 ACL
Column Syntax OID
ipv4-access-list
WORD Name of an IPv4 access-list (1-31 characters)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.1.1.1
rule
<1-2147483644> (Optional)ID of this rule
Integer32
Constraints:
range: 1-2147483644
.1.3.6.1.4.1.3902.3.1100.1.1.1.2
deny Specify packets to reject
permit Specify packets to forward
Enumeration
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.3902.3.1100.1.1.1.3
A.B.C.D Source address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.1100.1.1.1.4
A.B.C.D Wildcard bits
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.1100.1.1.1.5
Any source address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.1.1.6
A.B.C.D Destination address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.1100.1.1.1.7
A.B.C.D Destination wildcard bits
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.1100.1.1.1.8
Any destination address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.1.1.9
<0-255> An IP protocol number
gre Generic Routing Encapsulation (47)
icmp Internet Control Message Protocol(1)
igmp Internet Group Management Protocol (2)
ip Any internet protocol
ospf Open Shor…
Enumeration
Enumerated Values:
1icmp
2igmp
6tcp
17udp
47gre
89ospf
103pim
112vrrp
.1.3.6.1.4.1.3902.3.1100.1.1.1.10
eq (Optional)Match only packets on a given port number
ge (Optional)Match only packets with a no lower port number …
Enumeration
Enumerated Values:
0oprTypeInvalid
1eq
2ge
3le
7range
.1.3.6.1.4.1.3902.3.1100.1.1.1.11
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.1.1.12
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.1.1.13
eq (Optional)Match only packets on a given port number
ge (Optional)Match only packets with a no lower port number …
Enumeration
Enumerated Values:
0oprTypeInvalid
1eq
2ge
3le
7range
.1.3.6.1.4.1.3902.3.1100.1.1.1.14
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.1.1.15
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.1.1.16
(Optional)Match established connections
Enumeration
Enumerated Values:
0false
1true
.1.3.6.1.4.1.3902.3.1100.1.1.1.17
0-254|256 ICMP code
255 Any ICMP code
alternate-address Alternate address (6)
echo Echo (ping, 8)
echo-reply Echo reply (0)
information-reply Information …
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.3902.3.1100.1.1.1.18
0-254|256 (Optional)ICMP code
255 Any ICMP code
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.3902.3.1100.1.1.1.19
<0-7> Precedence level
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.3.1100.1.1.1.20
<0-15> Type of service(ToS)
Integer32
Constraints:
range: 0-15
.1.3.6.1.4.1.3902.3.1100.1.1.1.21
<0-63> DSCP value
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.1.1.22
Timerange enable or disable flag
Enumeration
Enumerated Values:
0active
1inactive
.1.3.6.1.4.1.3902.3.1100.1.1.1.23
time-range (Optional)Configure time range
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.1.1.24
createAndGo(4) Configure IPv4 ACL or rule
destroy(6) Delete IPv4 ACL or rule
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.3.1100.1.1.1.25
Fragment enable or disable flag
Enumeration
Enumerated Values:
0match-unfragment
1match-fragment
.1.3.6.1.4.1.3902.3.1100.1.1.1.26
Match on the specify TCP flag bit.
1 means + , and 0 means -.
Bit from low to high represents:
first : ack
second : fin
third : psh
fourth : rst
fifth : syn
sixth : urg
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.1.1.27
Match when the TCP flag set or not.
1 means setted , and 0 means not.
Bit from low to high represents:
first : ack
second : fin
third : psh
fourth : rst
fifth : syn
sixth : urg
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.1.1.28
Match on the specify ip flag bit.
1 means setted , and 0 means not.
Bit from low to high represents:
first : DSCP
second : TOS
third : Precedence
fourth : ICMPCode
fifth : ICMPType
sixth : i…
Integer32
Constraints:
range: 0-127
.1.3.6.1.4.1.3902.3.1100.1.1.1.29
eq (Optional)Match only packets on a given ttl value
ge (Optional)Match only packets with a no lower ttl value …
Enumeration
Enumerated Values:
0invalid
1eq
2ge
3le
6neq
7range
.1.3.6.1.4.1.3902.3.1100.1.1.1.30
The TTL value
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.3902.3.1100.1.1.1.31
The TTL value Begin
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.3902.3.1100.1.1.1.32
The TTL value End
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.3902.3.1100.1.1.1.33
The acl rule type
Enumeration
Enumerated Values:
1standard-rule
2extend-rule
.1.3.6.1.4.1.3902.3.1100.1.1.1.34
.1.3.6.1.4.1.3902.3.1100.1.2 · 1 row entry · 28 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IPv6ACLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-MIB::zxr10IPv6ACLTable'
IPv6 ACL Table
zxr10IPv6ACLEntry row .1.3.6.1.4.1.3902.3.1100.1.2.1
IPv6 ACL
Column Syntax OID
ipv6-access-list
WORD Name of an IPv6 access-list (1-31 characters)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.2.1.1
rule
<1-2147483644> (Optional)ID of this rule
Integer32
Constraints:
range: 1-2147483644
.1.3.6.1.4.1.3902.3.1100.1.2.1.2
deny Specify packets to reject
permit Specify packets to forward
Enumeration
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.3902.3.1100.1.2.1.3
<0-1048575> Flowlabel value
Integer32
Constraints:
range: 0-1048575
.1.3.6.1.4.1.3902.3.1100.1.2.1.4
<X:X::X:X> Source address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.2.1.5
<0-128> Source Wildcard
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.3902.3.1100.1.2.1.6
Any source address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.2.1.7
<X:X::X:X> Destination address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.2.1.8
<0-128> Destination Wildcard
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.3902.3.1100.1.2.1.9
Any destination address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.2.1.10
<0-255> An IP protocol number
gre Generic Routing Encapsulation (47)
icmp Internet Control Message Protocol(58)
igmp Internet Group Management Protocol (2)
ip Any internet protocol
ospf Open Shor…
Enumeration
Enumerated Values:
2igmp
6tcp
17udp
47gre
58icmp
89ospf
103pim
112vrrp
.1.3.6.1.4.1.3902.3.1100.1.2.1.11
eq (Optional)Match only packets on a given port number
ge (Optional)Match only packets with a no lower port number …
Enumeration
Enumerated Values:
0oprTypeInvalid
1eq
2ge
3le
7range
.1.3.6.1.4.1.3902.3.1100.1.2.1.12
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.2.1.13
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.2.1.14
eq (Optional)Match only packets on a given port number
ge (Optional)Match only packets with a no lower port number …
Enumeration
Enumerated Values:
0oprTypeInvalid
1eq
2ge
3le
7range
.1.3.6.1.4.1.3902.3.1100.1.2.1.15
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.2.1.16
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.2.1.17
(Optional)Match established connections
Enumeration
Enumerated Values:
0false
1true
.1.3.6.1.4.1.3902.3.1100.1.2.1.18
Match on the specify TCP flag bit.
1 means + , and 0 means -.
Bit from low to high represents:
first : ack
second : fin
third : psh
fourth : rst
fifth : syn
sixth : urg
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.2.1.19
Match when the TCP flag set or not.
1 means setted , and 0 means not.
Bit from low to high represents:
first : ack
second : fin
third : psh
fourth : rst
fifth : syn
sixth : urg
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.2.1.20
Matches if the specify IPv6 header is present.
1 means setted , and 0 means not.
Bit from low to high represents:
first : hop-by-hop
second : destopts
third : routing
fourth : fragments
fif…
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.2.1.21
0-254|256 ICMP type
255 Any ICMP type
destination-unreachable Destination unreachable (1)
echo-reply Echo reply (129)
echo-request Echo request (ping, 128)
m…
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.3902.3.1100.1.2.1.22
0-254|256 ICMP code
255 Any ICMP code
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.3902.3.1100.1.2.1.23
<0-63> DSCP value
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.2.1.24
Timerange enable or disable flag
Enumeration
Enumerated Values:
0active
1inactive
.1.3.6.1.4.1.3902.3.1100.1.2.1.25
time-range (Optional)Configure time range
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.2.1.26
createAndGo(4) Configure IPv6 ACL or rule
destroy(6) Delete IPv6 ACL or rule
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.3.1100.1.2.1.27
Match on the specify ip flag bit.
1 means setted , and 0 means not.
Bit from low to high represents:
first : DSCP
second : (reserved, default value 0)
third : (reserved, default va…
Integer32
Constraints:
range: 0-127
.1.3.6.1.4.1.3902.3.1100.1.2.1.28
.1.3.6.1.4.1.3902.3.1100.1.3 · 1 row entry · 20 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10LinkACLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-MIB::zxr10LinkACLTable'
Link ACL
zxr10LinkACLEntry row .1.3.6.1.4.1.3902.3.1100.1.3.1
Link ACL
Column Syntax OID
link-access-list
WORD Name of an link access-list (1-31 characters)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.3.1.1
rule
<1-2147483644> (Optional)ID of this rule
Integer32
Constraints:
range: 1-2147483644
.1.3.6.1.4.1.3902.3.1100.1.3.1.2
deny Specify packets to reject
permit Specify packets to forward
Enumeration
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.3902.3.1100.1.3.1.3
<0-65535> Link protocal
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.1100.1.3.1.4
<xxxx.xxxx.xxxx> Source MAC address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.3.1.5
<xxxx.xxxx.xxxx> Source MAC wildcard
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.3.1.6
any Any source MAC address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.3.1.7
<xxxx.xxxx.xxxx> Destination MAC address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.3.1.8
<xxxx.xxxx.xxxx> Destination MAC wildcard
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.3.1.9
any Any destination MAC address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.3.1.10
<0-7> Value of inner cos
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.3.1100.1.3.1.11
<0-7> Value of outer cos
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.3.1100.1.3.1.12
<1-4094> Value of inner vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.3.1.13
<1-4094> Value of outer vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.3.1.14
Timerange enable or disable flag
Enumeration
Enumerated Values:
0active
1inactive
.1.3.6.1.4.1.3902.3.1100.1.3.1.15
time-range (Optional)Configure time range
WORD Time range name (1-31 characters)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.3.1.16
createAndGo(4) Configure ACL or rule
destroy(6) Delete ACL or rule
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.3.1100.1.3.1.17
Match on the specify limk flag bit.
1 means setted , and 0 means not.
Bit from low to high represents:
first : in cos
second : out cos
third : in vlan
fourth : out vlan
fifth : linkprotocol
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.3.1.18
<1-4094> Value of inner vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.3.1.19
<1-4094> Value of outer vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.3.1.20
.1.3.6.1.4.1.3902.3.1100.1.4 · 1 row entry · 41 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IPv4MixedACLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-MIB::zxr10IPv4MixedACLTable'
IPv4 Mixed ACL Table
zxr10IPv4MixedACLEntry row .1.3.6.1.4.1.3902.3.1100.1.4.1
IPv4Mixed ACL
Column Syntax OID
IPv4Mixed-access-list
WORD Name of an IPv4 mixed access-list (1-31 characters)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.4.1.1
rule
<1-2147483644> (Optional)ID of this rule
Integer32
Constraints:
range: 1-2147483644
.1.3.6.1.4.1.3902.3.1100.1.4.1.2
deny Specify packets to reject
permit Specify packets to forward
Enumeration
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.3902.3.1100.1.4.1.3
<0-65535> Link protocal
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.1100.1.4.1.4
<xxxx.xxxx.xxxx> Source MAC address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.4.1.5
<xxxx.xxxx.xxxx> Source MAC wildcard
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.4.1.6
any Any source MAC address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.4.1.7
<xxxx.xxxx.xxxx> Destination MAC address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.4.1.8
<xxxx.xxxx.xxxx> Destination MAC wildcard
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.4.1.9
any Any destination MAC address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.4.1.10
<0-7> Value of inner cos
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.3.1100.1.4.1.11
<0-7> Value of outer cos
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.3.1100.1.4.1.12
<1-4094> Value of inner vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.4.1.13
<1-4094> Value of outer vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.4.1.14
A.B.C.D Source address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.1100.1.4.1.15
A.B.C.D Wildcard bits
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.1100.1.4.1.16
Any source address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.4.1.17
A.B.C.D Destination address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.1100.1.4.1.18
A.B.C.D Destination wildcard bits
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.3902.3.1100.1.4.1.19
Any destination address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.4.1.20
<0-255> An IP protocol number
gre Generic Routing Encapsulation (47)
icmp Internet Control Message Protocol(1)
igmp Internet Group Management Protocol (2)
ip Any internet protocol
ospf Open Short…
Enumeration
Enumerated Values:
1icmp
2igmp
6tcp
17udp
47gre
89ospf
103pim
112vrrp
.1.3.6.1.4.1.3902.3.1100.1.4.1.21
eq (Optional)Match only packets on a given port number
ge (Optional)Match only packets with a no lower port number …
Enumeration
Enumerated Values:
0oprTypeInvalid
1eq
2ge
3le
7range
.1.3.6.1.4.1.3902.3.1100.1.4.1.22
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.4.1.23
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.4.1.24
eq (Optional)Match only packets on a given port number
ge (Optional)Match only packets with a no lower port number …
Enumeration
Enumerated Values:
0oprTypeInvalid
1eq
2ge
3le
7range
.1.3.6.1.4.1.3902.3.1100.1.4.1.25
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.4.1.26
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.4.1.27
(Optional)Match established connections
Enumeration
Enumerated Values:
0false
1true
.1.3.6.1.4.1.3902.3.1100.1.4.1.28
0-254|256 ICMP type
255 Any ICMP type
alternate-address Alternate address (6)
echo Echo (ping, 8)
echo-reply Echo reply (0)
information-reply Information …
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.3902.3.1100.1.4.1.29
0-254|256 ICMP code
255 Any ICMP code
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.3902.3.1100.1.4.1.30
<0-7> Precedence level
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.3.1100.1.4.1.31
<0-15> Type of service(ToS)
Integer32
Constraints:
range: 0-15
.1.3.6.1.4.1.3902.3.1100.1.4.1.32
<0-63> DSCP value
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.4.1.33
Timerange enable or disable flag
Enumeration
Enumerated Values:
0active
1inactive
.1.3.6.1.4.1.3902.3.1100.1.4.1.34
time-range (Optional)Configure time range
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.4.1.35
createAndGo(4) Configure IPv4 Mixed ACL or rule
destroy(6) Delete IPv4 Mixed ACL or rule
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.3.1100.1.4.1.36
Match on the specify ip flag bit.
1 means setted , and 0 means not.
Bit from low to high represents:
first : DSCP
second : TOS
third : Precedence
fourth : ICMPCode
fifth : ICMPType
sixth : i…
Integer32
Constraints:
range: 0-127
.1.3.6.1.4.1.3902.3.1100.1.4.1.37
Match on the specify limk flag bit.
1 means setted , and 0 means not.
Bit from low to high represents:
first : in cos
second : out cos
third : in vlan
fourth : out vlan
fifth : linkprotocol
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.4.1.38
<1-4094> Value of inner vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.4.1.39
<1-4094> Value of outer vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.4.1.40
Fragment enable or disable flag
Enumeration
Enumerated Values:
0match-unfragment
1match-fragment
.1.3.6.1.4.1.3902.3.1100.1.4.1.41
.1.3.6.1.4.1.3902.3.1100.1.5 · 1 row entry · 42 columns
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxr10IPv6MixedACLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXR10-ACL-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXR10-ACL-MIB::zxr10IPv6MixedACLTable'
IPv6 Mixed ACL Table
zxr10IPv6MixedACLEntry row .1.3.6.1.4.1.3902.3.1100.1.5.1
IPv6 Mixed ACL
Column Syntax OID
IPv6Mixed-access-list
WORD Name of an IPv6 Mixed access-list (1-31 characters)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.5.1.1
rule
<1-2147483644> (Optional)ID of this rule
Integer32
Constraints:
range: 1-2147483644
.1.3.6.1.4.1.3902.3.1100.1.5.1.2
deny Specify packets to reject
permit Specify packets to forward
Enumeration
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.3902.3.1100.1.5.1.3
<0-65535> Link protocal
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.3902.3.1100.1.5.1.4
<xxxx.xxxx.xxxx> Source MAC address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.5.1.5
<xxxx.xxxx.xxxx> Source MAC wildcard
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.5.1.6
any Any source MAC address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.5.1.7
<xxxx.xxxx.xxxx> Destination MAC address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.5.1.8
<xxxx.xxxx.xxxx> Destination MAC wildcard
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.5.1.9
any Any destination MAC address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.5.1.10
<0-7> Value of inner cos
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.3.1100.1.5.1.11
<0-7> Value of outer cos
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.3902.3.1100.1.5.1.12
<1-4094> Value of inner vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.5.1.13
<1-4094> Value of outer vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.5.1.14
<0-1048575> Flowlabel value
Integer32
Constraints:
range: 0-1048575
.1.3.6.1.4.1.3902.3.1100.1.5.1.15
X:X::X:X Source address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.5.1.16
<0-128> Source Wildcard
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.3902.3.1100.1.5.1.17
Any source address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.5.1.18
X:X::X:X Destination address
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.5.1.19
<0-128> Destination Wildcard
Integer32
Constraints:
range: 0-128
.1.3.6.1.4.1.3902.3.1100.1.5.1.20
Any destination address
Enumeration
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.3902.3.1100.1.5.1.21
<0-255> An IP protocol number
gre Generic Routing Encapsulation (47)
icmp Internet Control Message Protocol(58)
igmp Internet Group Management Protocol (2)
ip Any internet protocol
ospf Open Shor…
Enumeration
Enumerated Values:
2igmp
6tcp
17udp
47gre
58icmp
89ospf
103pim
112vrrp
.1.3.6.1.4.1.3902.3.1100.1.5.1.22
eq (Optional)Match only packets on a given port number
ge (Optional)Match only packets with a no lower port number …
Enumeration
Enumerated Values:
0oprTypeInvalid
1eq
2ge
3le
7range
.1.3.6.1.4.1.3902.3.1100.1.5.1.23
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.5.1.24
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.5.1.25
eq (Optional)Match only packets on a given port number
ge (Optional)Match only packets with a no lower port number …
Enumeration
Enumerated Values:
0oprTypeInvalid
1eq
2ge
3le
7range
.1.3.6.1.4.1.3902.3.1100.1.5.1.26
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.5.1.27
<0-65535> Port number
bootpc Bootstrap protocol (BOOTP) client (68) …
Enumeration
Enumerated Values:
21ftp
23telnet
25smtp
53domain
67bootps
68bootpc
69tftp
79finger
80www
109pop2
110pop3
123ntp
161snmp
162snmptrap
179bgp
496pim-auto-rp
513login
520rip
.1.3.6.1.4.1.3902.3.1100.1.5.1.28
(Optional)Match established connections
Enumeration
Enumerated Values:
0false
1true
.1.3.6.1.4.1.3902.3.1100.1.5.1.29
Match on the specify TCP flag bit.
1 means + , and 0 means -.
Bit from low to high represents:
first : ack
second : fin
third : psh
fourth : rst
fifth : syn
sixth : urg
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.5.1.30
Match when the TCP flag set or not.
1 means setted , and 0 means not.
Bit from low to high represents:
first : ack
second : fin
third : psh
fourth : rst
fifth : syn
sixth : urg
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.5.1.31
Matches if the specify IPv6 header is present.
1 means setted , and 0 means not.
Bit from low to high represents:
first : hop-by-hop
second : destopts
third : routing
fourth : fragments
fif…
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.5.1.32
0-254|256 ICMP type
255 Any ICMP type
destination-unreachable Destination unreachable (1)
echo-reply Echo reply (129)
echo-request Echo request (ping, 128)
m…
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.3902.3.1100.1.5.1.33
0-254|256 ICMP code
255 Any ICMP code
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.3902.3.1100.1.5.1.34
<0-63> DSCP value
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.5.1.35
Timerange enable or disable flag
Enumeration
Enumerated Values:
0active
1inactive
.1.3.6.1.4.1.3902.3.1100.1.5.1.36
time-range (Optional)Configure time range
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.3902.3.1100.1.5.1.37
createAndGo(4) Configure IPv6 Mixed ACL or rule
destroy(6) Delete IPv6 Mixed ACL or rule
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.3902.3.1100.1.5.1.38
Match on the specify ip flag bit.
1 means setted , and 0 means not.
Bit from low to high represents:
first : DSCP
second : (reserved, default value 0)
third : (reserved, default va…
Integer32
Constraints:
range: 0-127
.1.3.6.1.4.1.3902.3.1100.1.5.1.39
Match on the specify limk flag bit.
1 means setted , and 0 means not.
Bit from low to high represents:
first : in cos
second : out cos
third : in vlan
fourth : out vlan
fifth : linkprotocol
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.3902.3.1100.1.5.1.40
<1-4094> Value of inner vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.5.1.41
<1-4094> Value of outer vlan
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.3902.3.1100.1.5.1.42