ZXPW-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
45

zxPwTable

table
.1.3.6.1.4.1.3902.1015.1013.1.1.2 · 1 row entry · 45 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxPwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXPW-STD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXPW-STD-MIB::zxPwTable' 
This table specifies information for configuring and  
status monitoring which are common to all service types  
and PSN types.
zxPwEntry row .1.3.6.1.4.1.3902.1015.1013.1.1.2.1
A row in this table represents a pseudo wire (PW) virtual
connection across a packet network. It is indexed by
zxPwIndex, which uniquely identifying a singular
connection.
A row is created by the operator or b…
Indexes
Column Syntax OID
zxPwIndex
Index for the conceptual row identifying a PW within
this PW Emulation table.
ZXPW-TC-STD-MIBPwIndexType .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.1
zxPwType
This value indicate the service to be carried over
this PW.
ZX-PWE3-MIBIANAPwTypeTCr/w
Type Values:
0other
1frameRelayDlci
2atmAal5SduVcc
3atmTransparent
4ethernetTagged
5ethernet
6hdlc
7ppp
8cem
9atmCellNto1Vcc
10atmCellNto1Vpc
11ipLayer2Transport
12atmCell1to1Vcc
13atmCell1to1Vpc
14atmAal5PduVcc
15frameRelayPortMode
16cep
17e1Satop
18t1Satop
19e3Satop
20t3Satop
21basicCesPsn
22basicTdmIp
23tdmCasCesPsn
24tdmCasTdmIp
25frDlci
253e1Cesop
254t1Cesop
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.2
zxPwOwner
Set by the operator to indicate the protocol responsible
for establishing this PW.
'manual' is used in all cases where no maintenance
protocol (PW signaling) is used to set-up the PW, i.e.
require configuration…
Enumerationr/w
Enumerated Values:
1manual
2pwIdFecSignaling
3genFecSignaling
4l2tpControlProtocol
5other
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.3
zxPwPsnType
Set by the operator to indicate the PSN type. Based on
this object, the relevant PSN table entries are created
in the in the PSN specific MIB modules.
ZX-PWE3-MIBIANAPwPsnTypeTCr/w
Type Values:
1mpls
2l2tp
3ip
4mplsOverIp
5gre
6other
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.4
zxPwSetUpPriority
This object defines the relative set-up priority of the PW
in a lowest-to-highest fashion, where 0 is the highest
priority. PWs with the same priority are treated with
equal priority. Dropped PW will be set 'do…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.5
zxPwHoldingPriority
This object defines the relative holding priority of the
PW in a lowest-to-highest fashion, where 0 is the highest
priority. PWs with the same priority are treated with
equal priority. Dropped PW will be set 'dor…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.6
zxPwPeerAddrType
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.8
zxPwPeerAddr
This object contains the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(zxPwPeerAddrType is 'unknown').
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.9
zxPwAttachedPwIndex
If the PW is attached to another PW instead of a local
native service, this item indicates the zxPwIndex of the
attached PW, and the PW specific entry in the service MIB
module MUST not be created. Otherwise, thi…
ZXPW-TC-STD-MIBPwIndexTyper/w .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.10
zxPwIfIndex
If the PW is represented in the ifTable as an ifIndex, this
item holds the ifIndex of the PW in the ifTable, otherwise
it MUST be set to zero.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.11
zxPwID
Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
Applicable if zxPwOwner equal 'zxPwIdFecSignaling' or
'l2tpControlProtocol', should be set to zero otherwise.
ZXPW-TC-STD-MIBPwIDTyper/w .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.12
zxPwLocalGroupID
Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if zxPwOwner equal 'zxPwIdFecSignaling' or
'l2tpControlProtocol', should be set to zero otherwise.
ZXPW-TC-STD-MIBPwGroupIDr/w .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.13
zxPwGroupAttachmentID
This object is an octet string representing the attachment
group identifier (AGI) this PW belongs too, which typically
identifies the VPN ID.
Applicable if zxPwOwner equal 'genFecSignaling'.
ZXPW-TC-STD-MIBPwAttachmentIdentifierTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.14
zxPwLocalAttachmentID
This object is an octet string representing the local
forwarder attachment individual identifier (AII) to be
used by this PW. It is used as the SAII for outgoing
signaling messages and the TAII in the incoming …
ZXPW-TC-STD-MIBPwAttachmentIdentifierTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.15
zxPwPeerAttachmentID
This object is an octet string representing the peer
forwarder attachment individual identifier (AII) to be
used by this PW. It is used as the TAII for outgoing
signaling messages and the SAII in the incoming m…
ZXPW-TC-STD-MIBPwAttachmentIdentifierTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.16
zxPwCwPreference
Defines if the control word will be sent with each packet
by the local node. Some PW types mandate the use of
control word, and is such cases the value configured has
no effect on the existence of the control w…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.17
zxPwLocalIfMtu
If not equal zero, the optional IfMtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the virtual interface) associated with the…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.18
zxPwLocalIfString
A PW MAY be associated to an interface (or a virtual
interface) in the ifTable of the node as part of the
service configuration. This object defines if the
maintenance protocol will send the interface's name as …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.19
zxPwLocalCapabAdvert
Indicates the capabilities to be advertised by this node
to the peer.
ZXPW-TC-STD-MIBPwCapabilitiesr/w
Type Values:
0pwStatusIndication
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.20
zxPwRemoteGroupID
Obtained from the Group ID field as received via the
maintenance protocol used for PW setup, zero if not used.
Value of 0xFFFF shall be used if the object is yet to be
defined by the PW maintenance protocol.
ZXPW-TC-STD-MIBPwGroupID .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.21
zxPwCwStatus
If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is to be present or not for this PW.
ZXPW-TC-STD-MIBPwCwStatusTC
Type Values:
1waitingForNextMsg
2sentWrongBitErrorCode
3rxWithdrawWithWrongBitErrorCode
4illegalReceivedBit
5cwPresent
6cwNotPresent
7notYetKnown
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.22
zxPwRemoteIfMtu
The remote interface MTU as (optionally) received from the
remote node via the maintenance protocol. Should be zero
if this parameter is not available or not used.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.23
zxPwRemoteIfString
Indicates the interface description string as received by
the maintenance protocol, MUST be NULL string if not
applicable or not known yet.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.24
zxPwRemoteCapabilities
Indicates the capabilities as advertised by the peer.
ZXPW-TC-STD-MIBPwCapabilities
Type Values:
0pwStatusIndication
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.25
zxPwFragmentCfgSize
If set to value other than zero, indicates that
fragmentation is desired for this PW.
ZXPW-TC-STD-MIBPwFragSizer/w .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.26
zxPwRmtFragCapability
The status of the fragmentation based on the local
configuration and the peer capabilities as advertised by
the peer if control protocol is used.
ZXPW-TC-STD-MIBPwFragStatus
Type Values:
0noFrag
1cfgFragGreaterThanPsnMtu
2cfgFragButRemoteIncapable
3remoteFragCapable
4fragEnabled
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.27
zxPwFcsRetentioncfg
The local configuration of FCS retention for this PW. FCS
retention can be configured for PW types HDLC, PPP and
Ethernet only. If the agent does not support FCS retention
the error should be configured in zxPwF…
Enumerationr/w
Enumerated Values:
1fcsRetentionDisable
2fcsRetentionEnable
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.28
zxPwFcsRetentionStatus
The status of the FCS retention negotiation process based on
local configuration and the remote advertisement.
remoteIndicationUnknown - set if a FEC has not been received
from the remote.
remoteRequestFcsRetent…
Bits
Enumerated Values:
0remoteIndicationUnknown
1remoteRequestFcsRetention
2fcsRetentionEnabled
3fcsRetentionDisabled
4localFcsRetentionCfgErr
5fcsRetentionFcsSizeMismatch
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.29
zxPwOutboundLabel
The PW label used in the outbound direction (i.e. toward
the PSN). It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2T…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.30
zxPwInboundLabel
The PW label used in the inbound direction (i.e. packets
received from the PSN. It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.31
zxPwName
The canonical name assigned to the PW.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.32
zxPwDescr
A textual string containing information about the PW.
If there is no description this object contains a zero
length string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.33
zxPwCreateTime
System time when this PW was created.
OctetString
Constraints:
range: 1-15
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.34
zxPwUpTime
Specifies the total time this PW operStatus has been
Up(1).
OctetString
Constraints:
range: 1-15
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.35
zxPwLastChange
The value of sysUpTime at the time the PW entered
its current operational state. If the current state was
entered prior to the last re-initialization of the local
network management subsystem, then this object co…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.36
zxPwAdminStatus
The desired operational status of this PW.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.37
zxPwOperStatus
This object indicates the operational status of the PW, it
does not reflect the status of the CE bound interface.
It is set to down only if pwNotForwarding,
psnFacingPwRxFault, or psnFacingPwTxFault indications…
ZXPW-TC-STD-MIBPwOperStatusTC
Type Values:
1up
2down
3testing
4unknown
5dormant
6notPresent
7lowerLayerDown
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.38
zxPwLocalStatus
Indicates the status of the PW in the local node.
The various indications in this object should be
available independent of the ability of the local node to
advertise them or the remote node to accept these stat…
ZXPW-TC-STD-MIBPwStatus
Type Values:
0pwNotForwarding
1customerFacingPwRxFault
2customerFacingPwTxFault
3psnFacingPwRxFault
4psnFacingPwTxFault
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.39
zxPwRemoteStatusCapable
Indicates the remote node capability to advertise the
PW status notification.
notAppicable should be reported for manually set PW, or
if the local node is not capable of sending the status
notification object…
Enumeration
Enumerated Values:
1notApplicable
2notYetKnown
3remoteCapable
4remoteNotCapable
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.40
zxPwRemoteStatus
Indicates the status of the PW as was advertised by the
remote. If the remote is not capable of advertising the

status object, or the local node is not able to accept
the status object through si…
ZXPW-TC-STD-MIBPwStatus
Type Values:
0pwNotForwarding
1customerFacingPwRxFault
2customerFacingPwTxFault
3psnFacingPwRxFault
4psnFacingPwTxFault
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.41
zxPwTimeElapsed
The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
interval measurement period.
HC-PerfHist-TC-MIBHCPerfTimeElapsed
Type Constraints:
range: 0..86399
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.42
zxPwValidIntervals
The number of previous 15-minute intervals
for which data was collected.
HC-PerfHist-TC-MIBHCPerfValidIntervals
Type Constraints:
range: 0..96
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.43
zxPwRowStatus
For creating, modifying, and deleting this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.44
zxPwStorageType
This variable indicates the storage type for this
object.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.45
zxPwPeerTos
 Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.3902.1015.1013.1.1.2.1.46