ZX-PWE3-EXT-MIB Table View

This table controls pseudowire extended parameters.

zxPwe3ExtPwEntry row .1.3.6.1.4.1.3902.1015.1013.21.1.2.1

A row in this table represents extended parameters of a pseudowire (PW). The row is created
automatically by the local agent. It is indexed by zxPwIndex, which uniquely identifying a singular PW.
Manual entries in this …

Indexes

ZXPW-STD-MIBzxPwIndex

Column	Syntax	OID
zxPwe3ExtPwSrcIpType The pseudowire source IP address type.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1015.1013.21.1.2.1.1
zxPwe3ExtPwSrcIp The pseudowire source IP address.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.1013.21.1.2.1.2
zxPwe3ExtPwSrcMac The pseudowire source MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1015.1013.21.1.2.1.3

This table controls MPLS specific parameters when the PW is
going to be carried over MPLS PSN.

zxPwMplsExtEntry row .1.3.6.1.4.1.3902.1015.1013.21.1.3.1

A row in this table represents parameters specific to MPLS
PSN for a pseudowire (PW). The row is created
automatically by the local agent if the zxPwPsnType is
mpls(1). It is indexed by zxPwIndex, which uniquely
identif…

Indexes

ZXPW-STD-MIBzxPwIndex

Column	Syntax	OID
zxPwMplsExtMplsType This variable indicates the MPLS type.	Enumerationr/w Enumerated Values: 1 static 2 dynamic 3 staticsingle	.1.3.6.1.4.1.3902.1015.1013.21.1.3.1.1
zxPwMplsExtOutboundTunnelLabel The MPLS Outbound Tunnel Label.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1013.21.1.3.1.2
zxPwMplsExtInboundTunnelLabel The MPLS Inbound Tunnel Label.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1013.21.1.3.1.3
zxPwMplsExtVcID Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP.	PwVcIDTyper/w	.1.3.6.1.4.1.3902.1015.1013.21.1.3.1.4
zxPwMplsExtControlWord Define if the control word will be sent with each packet by the local node.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.1013.21.1.3.1.5
zxPwMplsExtWithSequenceNumber Define if the sequence number will be sent with each packet by the local node.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.1013.21.1.3.1.6

This table controls pseudowire labels which have been used.

zxPwe3ExtPwLabelEntry row .1.3.6.1.4.1.3902.1015.1013.21.1.4.1

A row in this table represents pseudowire labels which have been used.

Indexes

zxPwe3ExtPwPsnType zxPwe3ExtPwLabelIndex

Column	Syntax	OID
zxPwe3ExtPwPsnType The PSN type.	ZX-PWE3-MIBIANAPwPsnTypeTC Type Values: 1 mpls 2 l2tp 3 ip 4 mplsOverIp 5 gre 6 other	.1.3.6.1.4.1.3902.1015.1013.21.1.4.1.1
zxPwe3ExtPwLabelIndex Index of the pseudowire labels which have been used.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.1013.21.1.4.1.2
zxPwe3ExtPwLabel The pseudowire labels which have been used.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.1013.21.1.4.1.3

This table controls IP head parameters of a pseudowire.

zxPwExtIpHeadEntry row .1.3.6.1.4.1.3902.1015.1013.21.1.5.1

A row in this table represents IP head parameters of a pseudowire.

Indexes

ZXPW-STD-MIBzxPwIndex

Column	Syntax	OID
zxPwExtIpTos Type of service. 256 means using the original TOS value.	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.3902.1015.1013.21.1.5.1.1
zxPwExtIpTtl Time to live.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.1013.21.1.5.1.2
zxPwExtIpDf Don't Fragment.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.3902.1015.1013.21.1.5.1.3

This table specifies extended information for an ATM PW
to be carried over PSN in any mode.

zxAnPwAtmExtCfgEntry row .1.3.6.1.4.1.3902.1015.1013.21.1.6.1

This table contains a set of extended parameters for
the ATM PW that needs to be adapted and carried
over the PSN. This table is indexed by zxPwIndex from
zxPwTable. An entry is created for every new ATM
type associat…

Indexes

ZXPW-STD-MIBzxPwIndex

Column	Syntax	OID
zxAnPwAtmExtTransmitTimeout A packet can be transmitted to the PSN based on timeout expiration for collecting cells.	microsecondsInteger32r/w Constraints: range: 50-4095	.1.3.6.1.4.1.3902.1015.1013.21.1.6.1.1

PW QoS table.

zxAnPwQosEntry row .1.3.6.1.4.1.3902.1015.1013.21.1.7.1

PW QoS entry.

Indexes

ZXPW-STD-MIBzxPwIndex

Column	Syntax	OID
zxAnPwQosCir Committed information rate.	kbpsInteger32r/w Constraints: range: 64-65535	.1.3.6.1.4.1.3902.1015.1013.21.1.7.1.1
zxAnPwQosCbs Committed burst size.	kbytesInteger32r/w Constraints: range: 64-65535	.1.3.6.1.4.1.3902.1015.1013.21.1.7.1.2
zxAnPwQosCirRemarkCos CoS remark value for traffic lower than CIR. The value 255 indicates that no remark CoS is configured.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.1013.21.1.7.1.3
zxAnPwQosPir Peak information rate.	kbpsInteger32r/w Constraints: range: 64-65535	.1.3.6.1.4.1.3902.1015.1013.21.1.7.1.4
zxAnPwQosPbs Peak burst size.	kbytesInteger32r/w Constraints: range: 64-65535	.1.3.6.1.4.1.3902.1015.1013.21.1.7.1.5
zxAnPwQosPirRemarkCos CoS remark value for traffic lower than PCR and higher than CIR. The value 255 indicates that no remark CoS is configured.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.1013.21.1.7.1.6
zxAnPwQosRowStatus The row status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1013.21.1.7.1.20

Pseudo-wire clock table.

zxAnPwClockEntry row .1.3.6.1.4.1.3902.1015.1013.21.1.8.1

Pseudo-wire clock table entry.

Indexes

ZXPW-STD-MIBzxPwIndex

Column	Syntax	OID
zxAnPwClockStatus Pseudo wire clock status. freeRun(1) - Pseudo-wire clock could not be acquired and in free status. holdOver(2) - Pseudo-wire could not acquire clock, and hold current clock …	Enumeration Enumerated Values: 1 freeRun 2 holdOver 3 acquiring 4 acquired 5 notReady	.1.3.6.1.4.1.3902.1015.1013.21.1.8.1.1
zxAnPwClockOffset Pseudo-wire clock offset. The unit is ppb(part per billion).	ppbSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.1013.21.1.8.1.2