ZTE-DSL-TRAFFIC-POLICING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

zxDslTrafficPolicingProfileTable

table

.1.3.6.1.4.1.3902.1004.41.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxDslTrafficPolicingProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-DSL-TRAFFIC-POLICING-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-DSL-TRAFFIC-POLICING-MIB::zxDslTrafficPolicingProfileTable'

Traffic Policing Profile Table

zxDslTrafficPolicingProfileEntry row .1.3.6.1.4.1.3902.1004.41.1.2.1

An entry in zxDslTrafficPolicingProfileTable.

Indexes

zxDslTraffPolicPrfName

Column Syntax OID

zxDslTraffPolicPrfName

Traffic policing profile name.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.3902.1004.41.1.2.1.1

zxDslTraffPolicSrvcSharedVlan

Service shared VLAN ID. This type of VLAN is used to
carried different service in same VLAN.
The value 0 means no service shared VLAN is used and service
oriented VLAN will be used in
table zxDslTrafficPolicingConf…

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.3902.1004.41.1.2.1.3

zxDslTraffPolicUsBandwidth

Upstream bandwidth can be used by traffic policing.

kbpsInteger32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.3902.1004.41.1.2.1.4

zxDslTraffPolicDsBandwidth

Downstream bandwidth can be used by traffic policing.

kbpsInteger32r/w

Constraints:
range: 0-40000

.1.3.6.1.4.1.3902.1004.41.1.2.1.5

zxDslTraffPolicRowStatus

Rowstatus of this entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.3902.1004.41.1.2.1.6

zxDslTrafficPolicingConfProfileTable

table

.1.3.6.1.4.1.3902.1004.41.1.3 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxDslTrafficPolicingConfProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-DSL-TRAFFIC-POLICING-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-DSL-TRAFFIC-POLICING-MIB::zxDslTrafficPolicingConfProfileTable'

Traffic Policing Rate Limit Configuration Profile Table

zxDslTrafficPolicingConfProfileEntry row .1.3.6.1.4.1.3902.1004.41.1.3.1

An entry in zxDslTrafficPolicingConfProfileTable.

Indexes

zxDslTraffPolicPrfName zxDslTraffPolicQueueId

Column	Syntax	OID
zxDslTraffPolicQueueId Queue ID of traffic policing.	Integer32 Constraints: `range: 0-3`	`.1.3.6.1.4.1.3902.1004.41.1.3.1.1`
zxDslTraffPolicSrvcOrientVlan Service oriented VLAN ID.This type of VLAN is used to specific service only. If zxDslTraffPolicSrvcSharedVlan=0,then SrvcOrientVlan can be configured non 0 value,else it is 0.	Integer32r/w Constraints: `range: 0-4094`	`.1.3.6.1.4.1.3902.1004.41.1.3.1.2`
zxDslTraffPolicUsRateLimit Upstream rate limit by traffic policing.It is less than zxDslTraffPolicUsBandwidth.	kbpsInteger32r/w Constraints: `range: 0-10000`	`.1.3.6.1.4.1.3902.1004.41.1.3.1.3`
zxDslTraffPolicDsRateLimit Downstream rate limit by traffic policing.It is less than zxDslTraffPolicDsBandwidth.	kbpsInteger32r/w Constraints: `range: 0-40000`	`.1.3.6.1.4.1.3902.1004.41.1.3.1.4`

zxDslTrafficPolicingIfTable

table

.1.3.6.1.4.1.3902.1004.41.1.4 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxDslTrafficPolicingIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-DSL-TRAFFIC-POLICING-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-DSL-TRAFFIC-POLICING-MIB::zxDslTrafficPolicingIfTable'