Standard view Table view

ZTE-DSL-PCCW-MODEM-MIB

        ZTE Enterprise MIB definition.
Source file
ZTE-DSL-PCCW-MODEM-MIB
Last revised
Identity
zxpccwModem
Base OID
1.3.6.1.4.1.3902.1004.27
Imported Objects
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TC DisplayString MacAddress TruthValue
ZTE-DSL-MIB zxDsl
Net-SNMP examples using the zte MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZTE-DSL-PCCW-MODEM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZTE-DSL-PCCW-MODEM-MIB::zxpccwModem'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-DSL-PCCW-MODEM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-DSL-PCCW-MODEM-MIB::zxpccwModem'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (20)
zxpccwModem
.1.3.6.1.4.1.3902.1004.27
zxpccwModemFWInfo
.1.3.6.1.4.1.3902.1004.27.1
zxpccwModemFWDownLoad
.1.3.6.1.4.1.3902.1004.27.2
zxpccwCpeTftpPortlist r/w
PortList
 .1.3.6.1.4.1.3902.1004.27.2.1
zxpccwRebootFileNameToCpe r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.10
zxpccwCpeTftpAdminStatus r/w
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.3902.1004.27.2.11
zxpccwCpeTftpFinishPortlist
PortList
 .1.3.6.1.4.1.3902.1004.27.2.12
zxpccwCpeTftpResultPortlist
PortList
 .1.3.6.1.4.1.3902.1004.27.2.13
zxpccwCpeFtpOperStatus
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.3902.1004.27.2.14
zxpccwCpeMptResult
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.3902.1004.27.2.15
zxpccwCpeActualModel r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.16
zxpccwCpeActualFirmwareVersion r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.17
zxpccwCpeVerAndPswdFileServerIP r/w
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.3902.1004.27.2.2
zxpccwFtpUser r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.3
zxpccwFtpPswd r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.4
zxpccwCpeFirmwareFileName r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.5
zxpccwCpePasswordFileName r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.6
zxpccwCpeRebootFileName r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.7
zxpccwFirmwareFileNameToCpe r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.8
zxpccwPasswordFileNameToCpe r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.3902.1004.27.2.9
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. ZTE-DSL-MIBzte
  8. ZTE-DSL-PCCW-MODEM-MIBzteselected
Type Definitions (1)
PortList
OctetString
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.