ZTE-AN-QOSPCL-MIB Table View

Traffic Limit Table

zxAnQosAclTrafficLimitEntry row .1.3.6.1.4.1.3902.1015.26.1.4.1

Traffic Limit Table

Indexes

zxAnAclNumber zxAnAclHybridRuleId

Column	Syntax	OID
zxAnQosAclTrafficLimitCir Committed Information Rate(CIR) in kbps.	Integer32r/w Constraints: range: 64-32000000	.1.3.6.1.4.1.3902.1015.26.1.4.1.1
zxAnQosAclTrafficLimitPir Peak Information Rate(PIR) in kbps.	Integer32r/w Constraints: range: 64-32000000	.1.3.6.1.4.1.3902.1015.26.1.4.1.2
zxAnQosAclTrafficLimitCbs Committed Burst Rate(CBS) in kbyte.	Integer32r/w Constraints: range: 4-16000	.1.3.6.1.4.1.3902.1015.26.1.4.1.3
zxAnQosAclTrafficLimitEbs Exceed Burst Size in kbyte.	Integer32r/w Constraints: range: 4-16000	.1.3.6.1.4.1.3902.1015.26.1.4.1.4
zxAnQosAclTrafficLimitPbs Peak burst size(KB).	Integer32r/w Constraints: range: 4-16000	.1.3.6.1.4.1.3902.1015.26.1.4.1.5
zxAnQosAclTrafficLimitMode meter color mode.	Enumerationr/w Enumerated Values: 1 blind 2 aware	.1.3.6.1.4.1.3902.1015.26.1.4.1.6
zxAnQosAclTrafficDropYellow Drop yellow packet	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.26.1.4.1.7
zxAnQosAclTrafficForwardRed Forward red packet	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.26.1.4.1.8
zxAnQosAclTrafficRemarkRedDp Remark red drop precedence	Enumerationr/w Enumerated Values: 1 low 2 medium 3 high	.1.3.6.1.4.1.3902.1015.26.1.4.1.9
zxAnQosAclTrafficRemarkRedDscp Remark red DSCP value	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.26.1.4.1.10
zxAnQosAclTrafficRemarkYellDp Remark yellow drop precedence	Enumerationr/w Enumerated Values: 1 low 2 medium 3 high	.1.3.6.1.4.1.3902.1015.26.1.4.1.11
zxAnQosAclTrafficRemarkYellDscp Remark yellow DSCP value	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.26.1.4.1.12
zxAnQosAclTrafficRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.4.1.50

Priority Mark Table

zxAnQosAclPriorityMarkEntry row .1.3.6.1.4.1.3902.1015.26.1.5.1

Priority Mark Table

Indexes

zxAnAclNumber zxAnAclHybridRuleId

Column	Syntax	OID
zxAnQosAclPriMarkDscp DSCP value	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.26.1.5.1.1
zxAnQosAclPriMarkCos Cos value	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.26.1.5.1.2
zxAnQosAclPriMarkPrecedence Precedence value (not for ipv6)	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.26.1.5.1.3
zxAnQosAclPriMarkLocalPrecedence Local precedence	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.26.1.5.1.4
zxAnQosAclPriMarkDropPrecedence Drop precedence	Enumerationr/w Enumerated Values: 1 low 2 medium 3 high	.1.3.6.1.4.1.3902.1015.26.1.5.1.5
zxAnQosPclPriMarkTrafficClass Traffic class field of IPv6. 65535 means unconfigured.	Integer32r/w Constraints: range: 65535-65535 range: 0-63	.1.3.6.1.4.1.3902.1015.26.1.5.1.6
zxAnQosAclPriMarkRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.5.1.30

VLAN mark table

zxAnQosAclVlanMarkEntry row .1.3.6.1.4.1.3902.1015.26.1.6.1

VLAN mark table

Indexes

zxAnAclNumber zxAnAclHybridRuleId

Column	Syntax	OID
zxAnQosAclVlanMarkVid VLAN id	Integer32r/w Constraints: range: 1-4090	.1.3.6.1.4.1.3902.1015.26.1.6.1.1
zxAnQosAclVlanMarkRowStatus RowStatus of this entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.6.1.30

A list of Qinq data entries.

zxAnQosPclQinqEntry row .1.3.6.1.4.1.3902.1015.26.1.7.1

An entry containing AclQos Qinq data.

Indexes

zxAnAclNumber zxAnAclHybridRuleId

Column	Syntax	OID
zxAnQosPclQinqSvlan VLAN ID,vlaid range 1-4090	Integer32r/w Constraints: range: 1-4090	.1.3.6.1.4.1.3902.1015.26.1.7.1.1
zxAnQosPclQinqCvlan VLAN ID,vlaid range 1-4090	Integer32r/w Constraints: range: 1-4090	.1.3.6.1.4.1.3902.1015.26.1.7.1.2
zxAnQosPclQinqRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.7.1.30

Redirect Table

zxAnQosAclRedirectEntry row .1.3.6.1.4.1.3902.1015.26.1.8.1

Redirect Table

Indexes

zxAnAclNumber zxAnAclHybridRuleId

Column	Syntax	OID
zxAnQosAclRedirectIf IfIndex of the interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.26.1.8.1.1
zxAnQosAclRedirectType The type of redirection. cpu(1) - data is redirected to CPU. interface(2) - data is redirected to interface. nextHop(3) - data is redirected to next hop address. Only at this time …	Enumerationr/w Enumerated Values: 1 cpu 2 interface 3 nextHop	.1.3.6.1.4.1.3902.1015.26.1.8.1.2
zxAnQosAclRedirectNextHopIpType IP address type of the next hop IP address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1015.26.1.8.1.3
zxAnQosAclRedirectNextHopIp Next hop IP address.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.8.1.4
zxAnQosAclRedirectRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.8.1.30

Traffic Mirror Table

zxAnQosAclTrafficMirrorEntry row .1.3.6.1.4.1.3902.1015.26.1.9.1

Traffic Mirror Table

Indexes

zxAnAclNumber zxAnAclHybridRuleId

Column	Syntax	OID
zxAnQosAclTrafficMirrorIf IfIndex of the interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.26.1.9.1.1
zxAnQosAclTrafficMirrorType The type of traffic mirroring.	Enumerationr/w Enumerated Values: 1 cpu 2 interface 3 rspan 4 erspan	.1.3.6.1.4.1.3902.1015.26.1.9.1.2
zxAnQosAclTrafficMirrorVlanId VLAN ID of RSPAN.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.3902.1015.26.1.9.1.3
zxAnQosAclTrafficMirrorCos Priority value of ERSPAN or RSPAN.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1015.26.1.9.1.4
zxAnQosAclTrafficMirrorTpid TPID value of ERSPAN or RSPAN.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1015.26.1.9.1.5
zxAnQosAclTrafficMirrorDstIpType Destination IP address type of ERSPAN.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1015.26.1.9.1.6
zxAnQosAclTrafficMirrorDstIpAddr Destination IP address of ERSPAN.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.9.1.7
zxAnQosAclTrafficMirrorSrcIpType Source IP address type of ERSPAN.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1015.26.1.9.1.8
zxAnQosAclTrafficMirrorSrcIpAddr Source IP address of ERSPAN.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.9.1.9
zxAnQosAclTrafficMirrorTtl TTL value of ERSPAN.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.26.1.9.1.10
zxAnQosAclTrafficMirrorDscp DSCP value of ERSPAN.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.26.1.9.1.11
zxAnQosAclTrafficMirrorRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.9.1.30

A list of perf data entries.

zxAnQosAclTrafficStatsEntry row .1.3.6.1.4.1.3902.1015.26.1.10.1

An entry containing perf data.

Indexes

zxAnAclNumber zxAnAclHybridRuleId zxAnQosAclTrafficStatsPktColor

Column	Syntax	OID
zxAnQosAclTrafficStatsPktColor 1-all packet 2-red packet 3-yellow packet 4-green packet.	Enumeration Enumerated Values: 1 all 2 red 3 yellow 4 green	.1.3.6.1.4.1.3902.1015.26.1.10.1.1
zxAnQosAclTrafficStatsType Performance type	Enumerationr/w Enumerated Values: 1 packet 2 byte	.1.3.6.1.4.1.3902.1015.26.1.10.1.2
zxAnQosAclTrafficStatsPkts The number of packets, delivered by this rule to a higher (sub-)layer.Discontinuities in the value of this counter can occur at re-initialization of the management system.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.26.1.10.1.3
zxAnQosAclTrafficStatsOctets The number of bytes, delivered by this rule to a higher (sub-)layer.Discontinuities in the value of this counter can occur at re-initialization of the management system.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.26.1.10.1.4
zxAnQosAclTrafficStatsReset reset the perf counter.	Enumerationr/w Enumerated Values: 3 resetCounter	.1.3.6.1.4.1.3902.1015.26.1.10.1.5
zxAnQosAclTrafficStatsRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.10.1.50

Time Range Table

zxAnQosPclTimeRangeEntry row .1.3.6.1.4.1.3902.1015.26.1.11.1

Time Range Table

Indexes

zxAnQosPclTimeRangeName

Column	Syntax	OID
zxAnQosPclTimeRangeName Name of the time range.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.26.1.11.1.1
zxAnQosPclTimeRangeType onlyonce: from 10:01:01 05-01-2007 to 12:01:01 05-01-2007 weekly: 14:00:00 to 22:00:00 friday.	Enumerationr/w Enumerated Values: 1 onlyonce 2 weekly	.1.3.6.1.4.1.3902.1015.26.1.11.1.2
zxAnQosPclOnceStartTime Fix range begin time. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.26.1.11.1.3
zxAnQosPclOnceEndTime Fix range end time. For example: yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.26.1.11.1.4
zxAnQosPclWeeklyDay Week day of the time range.The bits means from Sunday to Saturday. The bit value 1 means the day represented by this bit is choosen.	Bitsr/w Enumerated Values: 0 sunday 1 monday 2 tuesday 3 wednesday 4 thursday 5 friday 6 saturday	.1.3.6.1.4.1.3902.1015.26.1.11.1.5
zxAnQosPclWeeklyStartTime Week range begin time. For example: HH:MM:SS.(02:22:33).	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.26.1.11.1.6
zxAnQosPclWeeklyEndTime Week range end time. For example: HH:MM:SS.(02:22:33).	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1015.26.1.11.1.7
zxAnQosPclTimeRangeRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.11.1.30

Qos Pcl Bind Table

zxAnAclIfConfEntry row .1.3.6.1.4.1.3902.1015.26.1.12.1

Qos Pcl Bind Table

Indexes

zxAnQosPclBindRack zxAnQosPclBindShelf zxAnQosPclBindSlot zxAnQosPclBindPort zxAnQosPclBindOnu zxAnQosPclBindVCircuitType zxAnQosPclBindVCircuit zxAnQosPclBindDirection

Column	Syntax	OID
zxAnQosPclBindRack Rack number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.26.1.12.1.1
zxAnQosPclBindShelf Shelf number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.26.1.12.1.2
zxAnQosPclBindSlot Slot number of the port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.26.1.12.1.3
zxAnQosPclBindPort The port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.26.1.12.1.4
zxAnQosPclBindOnu The Onu number.It is 0 in DSL port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.26.1.12.1.5
zxAnQosPclBindVCircuitType Virtual circuit type.	Enumeration Enumerated Values: 1 physicalport 2 bridgeport 3 epononu 4 gpononu 11 serviceport 12 vlan 13 innerPort	.1.3.6.1.4.1.3902.1015.26.1.12.1.6
zxAnQosPclBindVCircuit Virtual circuit of this port. If zxAnQosPclBindVCircuitType is physicalport, zxAnQosPclBindVCircuit is filled by 0.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.26.1.12.1.7
zxAnQosPclBindDirection Bind Direction	Enumeration Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.3902.1015.26.1.12.1.8
zxAnAclIfConfAclNumber Bind Pcl Index	Integer32r/w Constraints: range: 600-699 range: 1-399	.1.3.6.1.4.1.3902.1015.26.1.12.1.9
zxAnAclIfConfAclName Name or alias of an ACL.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.3902.1015.26.1.12.1.10
zxAnAclIfConfRowStatus RowStatus of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.12.1.30

QoS PCL global binding table.

zxAnQosPclGlobalBindingEntry row .1.3.6.1.4.1.3902.1015.26.1.13.1

QoS PCL global binding entry.

Indexes

zxAnQosPclGlobalBindingType

Column	Syntax	OID
zxAnQosPclGlobalBindingType QoS PCL global binding type.	Enumeration Enumerated Values: 1 voip	.1.3.6.1.4.1.3902.1015.26.1.13.1.1
zxAnQosPclGlobalBindingIndex Index of QoS PCL binding to one type of global service. 0 means no QoS PCL binding. 300..399 for IPv4. 600..699 for IPv6.	Integer32r/w Constraints: range: 600-699 range: 300-399 range: 0-0	.1.3.6.1.4.1.3902.1015.26.1.13.1.2

ACL standard rule table. 
Provide ACL standard rule configuration.

zxAnAclStandardRuleEntry row .1.3.6.1.4.1.3902.1015.26.1.14.1

An entry in zxAnAclStandardRuleTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in o…

Indexes

zxAnAclStdAclNumber zxAnAclStdRuleId

Column	Syntax	OID
zxAnAclStdAclNumber The number of a standard ACL.	Integer32 Constraints: range: 1-99	.1.3.6.1.4.1.3902.1015.26.1.14.1.1
zxAnAclStdRuleId The index of a rule within a standard ACL.	Integer32 Constraints: range: 1-127	.1.3.6.1.4.1.3902.1015.26.1.14.1.2
zxAnAclStdRuleAccessCtrl Specify packets to be rejected or to be forwarded.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.3902.1015.26.1.14.1.3
zxAnAclStdRuleSrcIpType The type of IP address used by this rule entry.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1015.26.1.14.1.4
zxAnAclStdRuleSrcIp The source IP address to be matched for this rule. A value of zero causes all source address to match. The object value has to be consistent with the type specified in zxAnAclStdRuleSrcIpType.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.14.1.5
zxAnAclStdRuleSrcIpMask This is the wildcard mask for the zxAnAclStdRuleSrcIp bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclStdRuleSrcIp must match in order for the matching to be successful, and 1 b…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.14.1.6
zxAnAclStdRuleTimeRangeName Name of the time range.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.3902.1015.26.1.14.1.49
zxAnAclStdRuleRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must compl…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.14.1.50

ACL extended rule table.                
Provide ACL extended rule configuration.

zxAnAclExtendedRuleEntry row .1.3.6.1.4.1.3902.1015.26.1.15.1

An entry in zxAnAclExtendedRuleTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in on…

Indexes

zxAnAclExtAclNumber zxAnAclExtRuleId

Column	Syntax	OID
zxAnAclExtAclNumber The number of an extended ACL.	Integer32 Constraints: range: 100-199	.1.3.6.1.4.1.3902.1015.26.1.15.1.1
zxAnAclExtRuleId The index of a rule within a extended ACL	Integer32 Constraints: range: 1-1024	.1.3.6.1.4.1.3902.1015.26.1.15.1.2
zxAnAclExtRuleAccessCtrl Specify packets to be rejected or to be forwarded.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.3902.1015.26.1.15.1.3
zxAnAclExtRuleSrcIpType The type of source IP address used by this rule entry.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1015.26.1.15.1.4
zxAnAclExtRuleSrcIp The source IP address to be matched against for this rule. A zero value of this variable and a 0xFFFFFF value of variable zxAnAclExtRuleSrcIpMask causes all source address to match. The object value has to …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.15.1.5
zxAnAclExtRuleSrcIpMask This is the wildcard mask for the zxAnAclExtRuleSrcIp bits that must match.0 bits in the mask indicate the corresponding bits in the zxAnAclExtRuleSrcIp must match in order for the matching to be successful, and 1 bits…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.15.1.6
zxAnAclExtRuleDestIpType The type of destination IP address used by this rule entry.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1015.26.1.15.1.7
zxAnAclExtRuleDestIp The destination IP address to be matched against for this rule. A zero value of this variable and a 0xFFFFFF value of variable zxAnAclExtRuleDestIpMask causes all destination address to match. The object value has to …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.15.1.8
zxAnAclExtRuleDestIpMask This is the wildcard mask for the zxAnAclExtRuleDestIp bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclExtRuleDestIp must match in order for the matching to be successful, and 1 …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1015.26.1.15.1.9
zxAnAclExtRuleIpProtocol The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700.A value of '0xFF' matches every IP packet. For example : 255 is IP, 1 is ICMP, 2 is IGMP, 4 i…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.26.1.15.1.10
zxAnAclExtRuleSrcPortOper Indicates how a packet's source TCP/UDP port number is to be compared. If the zxAnAclExtRuleIpProtocol object in the same row does not indicate TCP or UDP, this object has to be 'none(1)' and cannot be…	ZxAnAclPortOperatorr/w Type Values: 0 none 1 eq 2 ge 3 le 7 range	.1.3.6.1.4.1.3902.1015.26.1.15.1.11
zxAnAclExtRuleStartSrcPort The source port number of the TCP or UDP protocol. If the zxAnAclExtRuleSrcPortOper object in the same row is range(7), this object will be the starting port number of the port range. This object cannot be configured i…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1015.26.1.15.1.12
zxAnAclExtRuleEndSrcPort The source port number of the TCP or UDP protocol. If the zxAnAclExtRuleSrcPortOper object in the same row is range(7), this object will be the ending port number of the port range. This object cannot be configured if…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1015.26.1.15.1.13
zxAnAclExtRuleDestPortOper Indicates how a packet's destination TCP/UDP port number is to be compared. If the zxAnAclExtRuleIpProtocol object in the same row does not indicate TCP or UDP, this object has to be 'none(1)' and canno…	ZxAnAclPortOperatorr/w Type Values: 0 none 1 eq 2 ge 3 le 7 range	.1.3.6.1.4.1.3902.1015.26.1.15.1.14
zxAnAclExtRuleStartDestPort The destination port number of the TCP or UDP protocol. If the zxAnAclExtRuleDestPortOper object in the same row is range(5), this object will be the starting port number of the port range. This object cannot be conf…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1015.26.1.15.1.15
zxAnAclExtRuleEndDestPort The destination port number of the TCP or UDP protocol. If the zxAnAclExtRuleDestPortOper object in the same row is range(5), this object will be the ending port number of the port range. This object cannot be config…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1015.26.1.15.1.16
zxAnAclExtRuleTcpEstablished Indicates whether matching established TCP packets. This object cannot be configured if zxAnAclExtRuleIpProtocol in the same row is not TCP. establishedTcp(1) means matching established TCP packets. notMatch(2) means n…	Enumerationr/w Enumerated Values: 1 establishedTcp 2 notMatch	.1.3.6.1.4.1.3902.1015.26.1.15.1.17
zxAnAclExtRuleIcmpType Specifies the ICMP type value to be matched against. A value of '0xFF' indicates not care about this field. If the zxAnAclExtRuleIpProtocol object in the same row does not indicate ICMP(1), this object has to be '0xFF'…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.26.1.15.1.18
zxAnAclExtRuleIcmpCode Specifies the ICMP code value to be matched against. A value of '0xFF' indicates not care about this field. If the zxAnAclExtRuleIpProtocol object in the same row does not indicate ICMP(1), this object has to be '0xFF'…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.26.1.15.1.19
zxAnAclExtRulePrecedence Specifies the IP precedence value to be matched against. Packets can be matched the IP precedence value from 0 to 7. This object can't be configured simultaneously with zxAnAclExtRuleDscp. A value of '0xFF' indicates…	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.26.1.15.1.20
zxAnAclExtRuleTos Specifies the TOS value to be matched against. Packets can be matched the TOS value from 0 to 15. This object can't be configured simultaneously with zxAnAclExtRuleDscp. A value of '0xFF' indicates not care about thi…	Integer32r/w Constraints: range: 255-255 range: 0-15	.1.3.6.1.4.1.3902.1015.26.1.15.1.21
zxAnAclExtRuleDscp Specifies the DSCP value to be matched against. Packets can be matched the DSCP level from 0 to 63. This object can't be configured simultaneously with zxAnAclExtRuleTos and zxAnAclExtRulePrecedence. A value of '0xFF…	Integer32r/w Constraints: range: 255-255 range: 0-63	.1.3.6.1.4.1.3902.1015.26.1.15.1.22
zxAnAclExtRuleTtl Specifies the TTL value to be matched against. Packets can be matched the TTL level from 0 to 255. A value of '0xFFFF' indicates not care about this field.	Integer32r/w Constraints: range: 65535-65535 range: 0-255	.1.3.6.1.4.1.3902.1015.26.1.15.1.23
zxAnAclExtRuleTimeRangeName Name of the time range	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.3902.1015.26.1.15.1.49
zxAnAclExtRuleRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must compl…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.15.1.50

ACL link rule table.                
Provide ACL link rule configuration.

zxAnAclLinkRuleEntry row .1.3.6.1.4.1.3902.1015.26.1.16.1

An entry in zxAnAclLinkRuleTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SN…

Indexes

zxAnAclLinkAclNumber zxAnAclLinkRuleId

Column	Syntax	OID
zxAnAclLinkAclNumber The number of a link ACL.	Integer32 Constraints: range: 200-299	.1.3.6.1.4.1.3902.1015.26.1.16.1.1
zxAnAclLinkRuleId The index of a rule within a link ACL.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1015.26.1.16.1.2
zxAnAclLinkRuleAccessCtrl Specify packets to be rejected or to be forwarded.	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.3902.1015.26.1.16.1.3
zxAnAclLinkRuleEthProtocol This 16-bit number indicates the matched Ethernet type. A value of '0xFFFF' indicates not care about this field.	Integer32r/w Constraints: range: 1537-65535	.1.3.6.1.4.1.3902.1015.26.1.16.1.4
zxAnAclLinkRuleStagCos Indicates the packet Cos value to be matched. If there are two tags in the packets, this object will be the Cos value in outer tag. A value of '0xFF' indicates not care about this field.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.3902.1015.26.1.16.1.5
zxAnAclLinkRuleSVid Indicates the packet VLAN number to be matched. If there are two tags in the packets, this object will be the VLAN number in outer tag. A value of '0xFFFF' indicates not care about this field.	Integer32r/w Constraints: range: 65535-65535 range: 1-4094	.1.3.6.1.4.1.3902.1015.26.1.16.1.6
zxAnAclLinkRuleCtagCos Indicates the packet Cos value to be matched. If there are two tags in the packets, this object will be the Cos value in inner tag. The value of this object is ignored whenever there is only one tag in the packets. A…	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.3902.1015.26.1.16.1.7
zxAnAclLinkRuleCVid Indicates the packet VLAN number to be matched. If there are two tags in the packets, this object will be the VLAN number in inner tag. The value of this object is ignored whenever there is only one tag in the packet…	Integer32r/w Constraints: range: 65535-65535 range: 1-4094	.1.3.6.1.4.1.3902.1015.26.1.16.1.8
zxAnAclLinkRuleSrcMac The source MAC address to be matched against for this rule. A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable zxAnAclLinkRuleSrcMacMask causes all source addresses to match.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1015.26.1.16.1.9
zxAnAclLinkRuleSrcMacMask This is the wildcard mask for the zxAnAclLinkRuleSrcMac bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclLinkRuleSrcMac must match in order for the matching to be successful, and…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1015.26.1.16.1.10
zxAnAclLinkRuleDestMac The destination MAC address to be matched against for this rule. A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable zxAnAclLinkRuleDestMacMask causes all destination addresses to match.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1015.26.1.16.1.11
zxAnAclLinkRuleDestMacMask This is the wildcard mask for the zxAnAclLinkRuleDestMac bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclLinkRuleDestMac must match in order for the matching to be successful, a…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1015.26.1.16.1.12
zxAnAclLinkRuleTimeRangeName Name of the time range.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.3902.1015.26.1.16.1.49
zxAnAclLinkRuleRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must compl…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.16.1.50

This table is to provide service that a specific ACL apply to 
a specific inteface VLAN with direction. 
                      
Then the traffic that through this interface VLAN is managed 
according to the ACL.

zxAnAclVlanConfEntry row .1.3.6.1.4.1.3902.1015.26.1.17.1

An entry in zxAnQosPclVlanConfTable.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in on…

Indexes

zxAnAclVlanConfVid zxAnAclVlanConfDirection

Column	Syntax	OID
zxAnAclVlanConfVid Interface VLAN id.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1015.26.1.17.1.1
zxAnAclVlanConfDirection Indicates whether this row's parameters are to be applied for ingress or for egress traffic.	Enumeration Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.3902.1015.26.1.17.1.2
zxAnAclVlanConfAclNumber The number of an ACL. range 1-99 - standard ACL. range 100-199 - extended ACL.	Integer32r/w Constraints: range: 1-199	.1.3.6.1.4.1.3902.1015.26.1.17.1.3
zxAnAclVlanConfAclName Name or alias of a standard or extended ACL.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.3902.1015.26.1.17.1.4
zxAnAclVlanConfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.26.1.17.1.50