ZTE-AN-QOSACL-MIB Table View

This table is to provide traffic-limit configuration 
based on the ACL rule.

zxAnQosAclTrafficLimitEntry row .1.3.6.1.4.1.3902.1082.50.5.2.2.2.1

Acl traffic-limit entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set o…

Indexes

ZTE-AN-ACL-MIBzxAnAclNumber zxAnQosAclTrafficLimitRuleId

Column	Syntax	OID
zxAnQosAclTrafficLimitRuleId The index of a rule.	Integer32 Constraints: range: 1-2147483644	.1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.1
zxAnQosAclTrafficLimitCir Committed Information Rate(CIR) in kbps.	Integer32r/w Constraints: range: 64-32000000	.1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.2
zxAnQosAclTrafficLimitPir Peak Information Rate(PIR) in kbps. '0' indicates no configure.	Integer32r/w Constraints: range: 64-32000000 range: 0-0	.1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.3
zxAnQosAclTrafficLimitCbs Committed Burst Rate(CBS) in kbyte.	Integer32r/w Constraints: range: 4-16000	.1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.4
zxAnQosAclTrafficLimitEbs Excess Burst Size(EBS) in kbps. '0' indicates no configure.	Integer32r/w Constraints: range: 4-16000 range: 0-0	.1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.5
zxAnQosAclTrafficLimitPbs Peak Burst Size(PBS) in kbps.'0' indicates no configure.	Integer32r/w Constraints: range: 4-16000 range: 0-0	.1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.6
zxAnQosAclTrafficLimitMode Mode of color marking . blind(1) means color blind mode aware(2) means color aware mode	Enumerationr/w Enumerated Values: 1 blind 2 aware	.1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.7
zxAnQosAclTrafficRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.5.2.2.2.1.50

This table is to provide priority-mark configuration 
based on the ACL rule.

zxAnQosAclPriorityMarkEntry row .1.3.6.1.4.1.3902.1082.50.5.2.2.3.1

Acl priority-mark entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set o…

Indexes

ZTE-AN-ACL-MIBzxAnAclNumber zxAnQosAclPriorityMarkRuleId

Column	Syntax	OID
zxAnQosAclPriorityMarkRuleId The index of a rule.	Integer32 Constraints: range: 1-2147483644	.1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.1
zxAnQosAclPriMarkDscp The DSCP value which will be marked to the traffic. '0xFF' indicates no configure .	Integer32r/w Constraints: range: 255-255 range: 0-63	.1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.2
zxAnQosAclPriMarkCos The cos value which will be marked to the traffic. '0xFF' indicates no configure.	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.3
zxAnQosAclPriMarkPrecedence The precedence value which will be marked to the traffic. '0xFF' indicates no configure.	Integer32r/w Constraints: range: 255-255 range: 0-7	.1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.4
zxAnQosAclPriMarkTrafficClass The traffic class value which will be marked to the traffic. 65535 means unconfigured.	Integer32r/w Constraints: range: 65535-65535 range: 0-63	.1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.7
zxAnQosAclPriMarkRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.5.2.2.3.1.50

This table is to provide vlan-mark configuration 
based on the ACL rule.

zxAnQosAclVlanMarkEntry row .1.3.6.1.4.1.3902.1082.50.5.2.2.4.1

Acl vlan-mark entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set opera…

Indexes

ZTE-AN-ACL-MIBzxAnAclNumber zxAnQosAclVlanMarkRuleId

Column	Syntax	OID
zxAnQosAclVlanMarkRuleId The index of a rule.	Integer32 Constraints: range: 1-2147483644	.1.3.6.1.4.1.3902.1082.50.5.2.2.4.1.1
zxAnQosAclVlanMarkVid The vlan number which will be marked to the traffic.	Integer32r/w Constraints: range: 1-4090	.1.3.6.1.4.1.3902.1082.50.5.2.2.4.1.2
zxAnQosAclVlanMarkRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.5.2.2.4.1.50

This table is to provide traffic-redirect configuration 
based on the ACL rule.

zxAnQosAclRedirectEntry row .1.3.6.1.4.1.3902.1082.50.5.2.2.5.1

Acl vlan-mark entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set opera…

Indexes

ZTE-AN-ACL-MIBzxAnAclNumber zxAnQosAclRedirectRuleId

Column	Syntax	OID
zxAnQosAclRedirectRuleId The index of a rule.	Integer32 Constraints: range: 1-2147483644	.1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.1
zxAnQosAclRedirectType The type of redirection. cpu(1) - traffic is redirected to CPU. interface(2) - traffic is redirected to interface. nextHop(3) - traffic is redirected to next hop.	Enumerationr/w Enumerated Values: 1 cpu 2 interface 3 nextHop	.1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.2
zxAnQosAclRedirectIf The Index of the interface which the traffic is redirected to.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.3
zxAnQosAclRedirectNextHopIpType The type of next hop IP address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.4
zxAnQosAclRedirectNextHopIp The next hop IP address which the traffic is redirected to.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.5
zxAnQosAclRedirectSubIf The sub-interface index of the interface which the traffic is redirected to.	ZTE-AN-TC-MIBZxAnSubIfIndexr/w Description: ZxAnSubIfIndex represents a sub-interface of a physical port. It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has its definitions such as …	.1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.6
zxAnQosAclRedirectRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.5.2.2.5.1.50

This table is to provide traffic-mirror configuration 
based on the ACL rule.

zxAnQosAclTrafficMirrorEntry row .1.3.6.1.4.1.3902.1082.50.5.2.2.6.1

Acl traffic-mirror entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set …

Indexes

ZTE-AN-ACL-MIBzxAnAclNumber zxAnQosAclTrafficMirrorRuleId

Column	Syntax	OID
zxAnQosAclTrafficMirrorRuleId The index of a rule.	Integer32 Constraints: range: 1-2147483644	.1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.1
zxAnQosAclTrafficMirrorType The type of traffic mirror. cpu(1) - traffic is mirrored to CPU. interface(2) - traffic is mirrored to interface. rspan(3) - traffic is mirrored to rspan. erspan(4) - traffic is mirrored to …	Enumerationr/w Enumerated Values: 1 cpu 2 interface 3 rspan 4 erspan	.1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.2
zxAnQosAclTrafficMirrorIf The Index of the interface which the traffic is mirrored to.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.3
zxAnQosAclTrafficMirrorVid The traffic VLAN ID of RSPAN or ERSPAN.	Integer32r/w Constraints: range: 65535-65535 range: 1-4094	.1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.4
zxAnQosAclTrafficMirrorCos The traffic CoS of RSPAN or ERSPAN.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.5
zxAnQosAclTrafficMirrorTpid The traffic TPID of RSPAN or ERSPAN.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.6
zxAnQosAclTrafficMirrorSubIf The sub-interface index of the interface which the traffic is mirrored to.	ZTE-AN-TC-MIBZxAnSubIfIndexr/w Description: ZxAnSubIfIndex represents a sub-interface of a physical port. It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has its definitions such as …	.1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.15
zxAnQosAclTrafficMirrorRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.5.2.2.6.1.50

This table is to provide traffic-statistics configuration 
based on the ACL rule.

zxAnQosAclTrafficStatsEntry row .1.3.6.1.4.1.3902.1082.50.5.2.3.2.1

Acl traffic-statistics entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP …

Indexes

ZTE-AN-ACL-MIBzxAnAclNumber zxAnQosAclTrafficStatsRuleId

Column	Syntax	OID
zxAnQosAclTrafficStatsRuleId The index of a rule.	Integer32 Constraints: range: 1-2147483644	.1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.1
zxAnQosAclTrafficStatsPktsHc The number of packets. This object is a 64-bit version of zxAnQosAclTrafficStatsPkts.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.6
zxAnQosAclTrafficStatsOctetsHc The number of octets. This object is a 64-bit version of zxAnQosAclTrafficStatsOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.7
zxAnQosAclTrafficStatsPktRate The rate of packets.	ppsHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.8
zxAnQosAclTrafficStatsOctetRate The rate of octets.	BpsHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.9
zxAnQosAclTrafficStatsReset Reset the traffic statistics counter. To get this object, the agent always returns resetCounter(1).	Enumerationr/w Enumerated Values: 1 resetCounter	.1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.45
zxAnQosAclTrafficStatsRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.5.2.3.2.1.50