ZTE-AN-QOS-TRAFFIC-MIB Table View

This table contains information about traffic controlling.
An entry in this table reflects a profile defined which can be
used to configure an interface.

zxAnQosTrafficPrfEntry row .1.3.6.1.4.1.3902.1082.50.2.2.1.1

zxAnQosTrafficPrfTable entry.

The multi-variables binding rule should be complied with when a
manager creates an entry. According to this rule, all the related
mib variables must be included in one SNMP set…

Indexes

zxAnQosTrafficPrfName

Column	Syntax	OID
zxAnQosTrafficPrfName Traffic profile name which can be applied to an interface.	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.1
zxAnQosTrafficPrfCir Committed Information Rate(CIR) in kbps.	kbpsInteger32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.2
zxAnQosTrafficPrfCbs Committed Burst Size(CBS) in kbytes.	kbytesInteger32r/w Constraints: range: 0-131072	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.3
zxAnQosTrafficPrfPir Peak Information Rate(PIR) in kbps.	kbpsInteger32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.4
zxAnQosTrafficPrfPbs Peak Burst Size(PBS) in kbyte.	kbytesInteger32r/w Constraints: range: 0-131072	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.5
zxAnQosTrafficPrfDiscardMode The discard mode is used when the traffic exceeds the limit. noDistinction(1) -- discard extra flow equally. lowPriorityFirst(2) -- discard low priority flow firstly.	Enumerationr/w Enumerated Values: 1 noDistinction 2 lowPriorityFirst	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.6
zxAnQosTrafficPrfColorMode Color mode. aware(1) -- color aware mode. blind(2) -- color blind mode.	Enumerationr/w Enumerated Values: 1 aware 2 blind	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.7
zxAnQosTrafficPrfPolicerType Policer type.	Enumerationr/w Enumerated Values: 1 enhancedMef 2 mef 3 rfc 4 multipleThresholds	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.8
zxAnQosTrafficPrfCouplingEn Enables or disables the coupling enabling.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.9
zxAnQosTrafficPrfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.2.2.1.1.50

This table contains interface's traffic configuration.

zxAnQosTrafficIfConfEntry row .1.3.6.1.4.1.3902.1082.50.2.2.2.1

This table contains QoS traffic configuration parameters
for gpon olt interface and gpon onu interface.

There are two types of variables: mandatory and optional.
All of the mandatory variables must be inclu…

Indexes

IF-MIBifIndex ZTE-AN-IF-MIBzxAnSubIfIndex zxAnQosTrafficIfDirection

Column	Syntax	OID
zxAnQosTrafficIfDirection Egress direction or ingress direction on an interface.	Enumeration Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.3902.1082.50.2.2.2.1.1
zxAnQosTrafficIfConfPrf This object configures traffic profile of ingress or egress direction. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.50.2.2.2.1.2
zxAnQosTrafficIfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.2.2.2.1.50

Traffic configuration based on the queue of the interface table.

zxAnQosTrafficIfQueueConfEntry row .1.3.6.1.4.1.3902.1082.50.2.2.4.1

Traffic configuration based on the queue of the interface entry.

Indexes

IF-MIBifIndex ZTE-AN-IF-MIBzxAnSubIfIndex zxAnQosTrafficIfQueueId zxAnQosTrafficIfQueueDirection

Column	Syntax	OID
zxAnQosTrafficIfQueueId Queue ID. The number of queues is fixed to zxAnQosGlobalMaxQueues in ZTE-AN-QOS-MIB.mib.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.3902.1082.50.2.2.4.1.1
zxAnQosTrafficIfQueueDirection The direction of the queue.	Enumeration Enumerated Values: 1 egress 2 ingress	.1.3.6.1.4.1.3902.1082.50.2.2.4.1.2
zxAnQosTrafficIfQueueConfPrf Traffic configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.50.2.2.4.1.3
zxAnQosTrafficIfQueueRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.2.2.4.1.50

Egress or ingress traffic shaping configuration based on the
interface table.

zxAnQosTrafficIfShape2ConfEntry row .1.3.6.1.4.1.3902.1082.50.2.2.6.1

Egress or ingress traffic shaping configuration based on the
interface entry.
This table contains QoS traffic configuration parameters
for physical interfaces (including ethernet interfaces and GPON OLT
interfaces) and …

Indexes

IF-MIBifIndex ZTE-AN-IF-MIBzxAnSubIfIndex zxAnQosTrafficIfShape2Direction

Column	Syntax	OID
zxAnQosTrafficIfShape2Direction The direction of the interface.	Enumeration Enumerated Values: 1 egress 2 ingress	.1.3.6.1.4.1.3902.1082.50.2.2.6.1.1
zxAnQosTrafficIfShape2ConfPrf Traffic configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.50.2.2.6.1.2
zxAnQosTrafficIfShape2RowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.2.2.6.1.50

Traffic flow profile table.

zxAnQosTrafficFlowPrfEntry row .1.3.6.1.4.1.3902.1082.50.2.2.20.2.1

Traffic flow profile entry.

Indexes

zxAnQosTrafficFlowPrfName

Column	Syntax	OID
zxAnQosTrafficFlowPrfName Traffic flow profile name.	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.50.2.2.20.2.1.1
zxAnQosTrafficFlowPrfMode Traffic flow profile mode. cos(1): Rate is limited with CoS. any(2): Rate is limited without CoS.	Enumerationr/w Enumerated Values: 1 cos 2 any	.1.3.6.1.4.1.3902.1082.50.2.2.20.2.1.2
zxAnQosTrafficFlowPrfRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.2.2.20.2.1.50

Traffic flow rule of the profile table.

zxAnQosTrafficFlowRulePrfEntry row .1.3.6.1.4.1.3902.1082.50.2.2.20.3.1

Traffic flow rule of the profile entry.

Indexes

zxAnQosTrafficFlowPrfName zxAnQosTrafficFlowRuleId

Column	Syntax	OID
zxAnQosTrafficFlowRuleId Flow rule ID of the profile.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.1
zxAnQosTrafficFlowRuleCosList CoS list. | bit 0 | bit 1 | ... bit 7 | +----------+----------+----...-----------+ | CoS 0 | CoS 1 | ... CoS 7 | +----------+----------+----...-----------+ If one …	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.2
zxAnQosTrafficFlowRuleTrafficPrf Traffic configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable. An empty string means not configured.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.3
zxAnQosTrafficFlowRuleCarThresh CAR (Commit Access Rate) threshold. The flow can take x% of the tokens from the token bucket at most. When the number of the tokens taken from the token bucket exceeds x%, the flow is forbidden to take any tokens. For …	Enumerationr/w Enumerated Values: 1 percent10 2 percent25 3 percent50 4 percent75 5 percent100	.1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.4
zxAnQosTrafficFlowRuleRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.2.2.20.3.1.50

Traffic flow interface group configuration information table
for ethernet interface.

zxAnQosTrafficFlowIfGrpConfEntry row .1.3.6.1.4.1.3902.1082.50.2.2.20.4.1

Traffic flow interface group configuration information entry.

Indexes

IF-MIBifIndex ZTE-AN-IF-MIBzxAnSubIfIndex zxAnQosTrafficFlowIfGrpId zxAnQosTrafficFlowIfGrpDirection

Column	Syntax	OID
zxAnQosTrafficFlowIfGrpId Traffic flow group ID.	Integer32 Constraints: range: 1-15000	.1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.1
zxAnQosTrafficFlowIfGrpDirection Traffic flow direction.	Enumeration Enumerated Values: 1 ingress 2 egress	.1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.2
zxAnQosTrafficFlowIfGrpFlowPrf Traffic flow configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficFlowPrfTable.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.3
zxAnQosTrafficFlowIfGrpSvlanList Traffic flow SVLAN list. The OCTET STRING contains pairs of values in the following structure: Octets 0-1 -- VLAN ID. Octets 2-3 -- VLAN ID. ... Octets 6-7 -- VLAN ID.	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.4
zxAnQosTrafficFlowIfGrpCvlanList Traffic flow CVLAN list. The OCTET STRING contains pairs of values in the following structure: Octets 0-1 -- VLAN ID. Octets 2-3 -- VLAN ID. ... Octets 6-7 -- VLAN ID.	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.5
zxAnQosTrafficFlowIfGrpTrffcPrf Traffic configuration profile. The value of this object is the name of the referenced profile in the zxAnQosTrafficPrfTable. An empty string means not configured.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.6
zxAnQosTrafficFlowIfGrpMode Traffic flow group mode. fullMatch(1): A SVLAN+CVLAN+CoSs is mapping to a rule. oneToOne(2): A SVLAN+CVLAN is mapping to a rule.	Enumerationr/w Enumerated Values: 1 fullMatch 2 oneToOne	.1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.7
zxAnQosTrafficFlowIfGrpRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.50.2.2.20.4.1.50