ZTE-AN-PPPOE-TEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
16

zxAnPppoeTestIfConfTable

table
.1.3.6.1.4.1.3902.1082.70.56.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnPppoeTestIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PPPOE-TEST-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfConfTable' 
PPPoE test interface configuration table.
zxAnPppoeTestIfConfEntry row .1.3.6.1.4.1.3902.1082.70.56.2.2.1
A zxAnPppoeTestIfConfTable entry.
Indexes
Column Syntax OID
zxAnPppoeTestIfUserVid
The user VLAN of the interface which will be used in the testing
datagram.

0 means that test will use the PVID of interface.
Non-zero value must be within the tagged VLAN list of interface. If
the VLAN c…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.70.56.2.2.1.1
zxAnPppoeTestIfPppUserName
User name for PPP authentication.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.70.56.2.2.1.2
zxAnPppoeTestIfPppPassword
Password for PPP authentication.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.70.56.2.2.1.3
zxAnPppoeTestIfAuthMode
The protocol for user authentication.

Possible values are:
auto(1) - Assigned automatically.
pap(2) - Performing PAP authentication in PPPoE test.
chap(3) - Performing CHAP authentication in PPP…
Enumerationr/w
Enumerated Values:
1auto
2pap
3chap
 .1.3.6.1.4.1.3902.1082.70.56.2.2.1.4
zxAnPppoeTestIfTimeout
The PPPoE test timeout value, in seconds.
Value 0 means no timeout.
SecondsInteger32r/w
Constraints:
range: 0-0
range: 10-65535
 .1.3.6.1.4.1.3902.1082.70.56.2.2.1.5
zxAnPppoeTestIfUserMacAddress
The PPPoE test user MAC address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1082.70.56.2.2.1.6
zxAnIfPppoeTestIfRowStatus
This object is used to create a new row or delete an existing row
in this table. Only 'createAndGo' and 'destroy' need to be
supported. If test is in progress, agent should reject the 'destroy'
request from manager.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.70.56.2.2.1.50

zxAnPppoeTestIfStatusTable

table
.1.3.6.1.4.1.3902.1082.70.56.2.3 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnPppoeTestIfStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PPPOE-TEST-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PPPOE-TEST-MIB::zxAnPppoeTestIfStatusTable' 
PPPoE test interface status table.
zxAnPppoeTestIfStatusEntry row .1.3.6.1.4.1.3902.1082.70.56.2.3.1
A zxAnPppoeTestIfStatusTable entry.
Indexes
Column Syntax OID
zxAnPppoeTestIfStatus
PPPoE test status.
Agent need keep this parameter updated so that
manager can get the latest status of test by polling.

Possible values are:
notStarted(1) - PPPoE test is not started.
inProgress(2) - PPPo…
Enumeration
Enumerated Values:
1notStarted
2inProgress
3success
4failed
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.1
zxAnPppoeTestIfFailReason
Failed reason for PPPoE test.

Possible values are:
none(1) - No Error
unknownError(2) - Unknown Error
hardwareNotSupport(3) - Hardware Not Supported
vlanNotFound(4) - VLAN Not Fo…
Enumeration
Enumerated Values:
1none
2unknownError
3hardwareNotSupport
4vlanNotFound
5padiTimeout
6padrTimeout
7lcpNegotiationFail
8userAuthFail
9ipNegotiationFail
10pppoeTestTimeout
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.2
zxAnPppoeTestIfBasMac
MAC address of BAS.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.3
zxAnPppoeTestIfRemotePeerIpType
IP address type of the remote peer.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.4
zxAnPppoeTestIfRemotePeerIpAddr
IP address of the remote peer.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.5
zxAnPppoeTestIfClientIpType
Client IP address type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.6
zxAnPppoeTestIfClientIpAddr
The IP address that is distributed by BAS.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.7
zxAnPppoeTestIfPppoeSessionId
PPPoE session ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.8
zxAnPppoeTestIfBasDelay
BAS delay.
Value 0 means that the device is disconnected to BAS.
MillisecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.70.56.2.3.1.9