ZTE-AN-PETH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
17

zxAnPethPsePortTable

table
.1.3.6.1.4.1.3902.1015.300.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnPethPsePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PETH-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PETH-MIB::zxAnPethPsePortTable' 
Peth Port Table
zxAnPethPsePortEntry row .1.3.6.1.4.1.3902.1015.300.1.2.1
Peth Port Entry
Indexes
Column Syntax OID
zxAnPethPsePortForcePowerEnable
Enable/disable force power on this interface.
and force power on the specified port without detection.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.300.1.2.1.1
zxAnPethPsePortActualVoltage
The actual voltage of this port.
0.1VSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.300.1.2.1.2
zxAnPethPsePortActualCurrent
The actual current of this port.
mASNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.300.1.2.1.3
zxAnPethPsePortActualPower
The actual power of this port.
0.1WSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.300.1.2.1.4
zxAnPethPsePortMaxPower
The maximum power of this port.
0.1WInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.3902.1015.300.1.2.1.5
zxAnPethPsePortDetectionType
Describes the detection type of the port PD detection.
NoDetection indicates force power on the port without detection,
LegacyOnly indicates legacy detection only,
FourPointOnly indicates IEEE 802.3af 4-Point Detection …
Enumerationr/w
Enumerated Values:
1noDetection
2legacyOnly
3fourPointOnly
4fourPointLegacy
5twoPointOnly
6twoPointLegacy
 .1.3.6.1.4.1.3902.1015.300.1.2.1.6
zxAnPethPsePortWorkMode
PSE port working mode.
Enumeration
Enumerated Values:
1ieee8023af
2ieee8023at
 .1.3.6.1.4.1.3902.1015.300.1.2.1.7
zxAnPethPsePortReset
Reset port.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.3902.1015.300.1.2.1.8
zxAnPethPsePortOperStatus
PSE port operational status.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.3902.1015.300.1.2.1.9
zxAnPethPsePortDetailInfo
PSE port detail information.
When zxAnPethPsePortOperStatus is 'down', this object will be show
the detail information of port.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.3902.1015.300.1.2.1.10
zxAnPethPsePortTrapEnable
Enable/disable the zxAnPethPsePortStatusUp and
zxAnPethPsePortStatusDown.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.300.1.2.1.11

zxAnPethPseCardTable

table
.1.3.6.1.4.1.3902.1015.300.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnPethPseCardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PETH-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PETH-MIB::zxAnPethPseCardTable' 
Peth Card Table
zxAnPethPseCardEntry row .1.3.6.1.4.1.3902.1015.300.1.3.1
Peth Card Entry
Indexes
Column Syntax OID
zxAnPethPseRack
Rack No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.300.1.3.1.1
zxAnPethPseShelf
Shelf No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.300.1.3.1.2
zxAnPethPseSlot
Card No.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.300.1.3.1.3
zxAnPethPseCardSupportPoe
This variable indicates whether the card supports PoE management.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.300.1.3.1.4

zxAnPethPdePortTable

table
.1.3.6.1.4.1.3902.1015.300.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnPethPdePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PETH-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PETH-MIB::zxAnPethPdePortTable' 
PDE(Power Device Equipment) port information.
zxAnPethPdePortEntry row .1.3.6.1.4.1.3902.1015.300.1.4.1
PDE port entry.
Indexes
Column Syntax OID
zxAnPethPdePortAutoCheckEnable
Enable/disable to check port power status automatically.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1015.300.1.4.1.1
zxAnPethPdePortPowerSupplyStatus
The port power status.
Enumeration
Enumerated Values:
1unknown
2on
3off
 .1.3.6.1.4.1.3902.1015.300.1.4.1.2