ZTE-AN-MDI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
50

zxAnMdiMonitorConfTable

table
.1.3.6.1.4.1.3902.1082.150.1.2.2.2 · 1 row entry · 22 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnMdiMonitorConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MDI-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MDI-MIB::zxAnMdiMonitorConfTable' 
Media delivery index monitoring table.
zxAnMdiMonitorConfEntry row .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1
Media delivery index monitoring entry.
Indexes
Column Syntax OID
zxAnMdiMonitorSessionId
The session ID of MDI monitoring.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.1
zxAnMdiMonitorIfIndex
The index of NNI/UNI port.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.2
zxAnMdiMonitorSubIfIndex
The sub-interface of NNI/UNI port.
ZTE-AN-TC-MIBZxAnSubIfIndexr/w
Description:
ZxAnSubIfIndex represents a sub-interface of a physical port.
It must be used with ifIndex. ZxAnSubIfIndex uses a complex coding
to construct the subIfIndex. Each bit field of ZxAnSubIfIndex has
its definitions such as …
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.3
zxAnMdiMonitorVlan
The VLAN of the monitoring packets.
ZTE-AN-TC-MIBVlanIdr/w
Type Constraints:
range: 1..4094
Description:
A 12-bit VLAN ID used in the VLAN Tag header.
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.4
zxAnMdiMonitorDestIpAddressType
The destination IP address type of the monitoring packets.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.5
zxAnMdiMonitorDestIpAddress
The destination IP address of the monitoring packets.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.6
zxAnMdiMonitorBitRate
The bit rate of MDI monitoring. Value 0 means VBR (Variable Bit
Rate), otherwise CBR (Constants Bit Rate).
bpsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.7
zxAnMdiMonitorCalculatePeriod
The calculation period of MDI monitoring. A primary record of MDI
monitoring will be created when arriving the end of the period.
MillisecondsInteger32r/w
Constraints:
range: 100-2000
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.8
zxAnMdiMonitorStatisticPeriod
The statistic period of MDI monitoring. A statistic record of MDI
monitoring will be created when arriving the end of the period,
based on the primary records that created in the period.
SecondsInteger32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.9
zxAnMdiMonitorDuration
The duration of MDI monitoring.
MinutesInteger32r/w
Constraints:
range: 5-525600
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.10
zxAnMdiMonitorStatus
The status of MDI monitoring. The status will be 'monitoring' when
the monitoring session is created, and 'stopped' when arriving the
end of monitoring duration.
Enumeration
Enumerated Values:
1monitoring
2stopped
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.11
zxAnMdiMonitorStartTime
The starting time of MDI monitoring.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.12
zxAnMdiMonitorVideoPrf
The video profile of MDI monitoring.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.13
zxAnMdiMonitorSrcIpAddressType
The source IP address type of the monitoring packets.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.14
zxAnMdiMonitorSrcIpAddress
The source IP address of the monitoring packets.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.15
zxAnMdiMonitorDirection
The direction of MDI monitoring.
Enumerationr/w
Enumerated Values:
1ingress
2egress
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.16
zxAnMdiMonitorDestUdpPort
The destination UDP port of MDI monitoring.
Value 0 means not configured.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.17
zxAnMdiMonitorCliIpAddress
The CLI IP address of the monitoring packets.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.21
zxAnMdiMonitorCliSourceIpAddress
The CLI source IP address of the monitoring packets.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.22
zxAnMdiMonitorGemPort
The GEM port of MDI monitoring.
Value 0 means not configured.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.45
zxAnMdiMonitorRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.50
zxAnMdiMonitorIfName
The video profile of MDI monitoring.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.150.1.2.2.2.1.66

zxAnMdiMonitorStatsTable

table
.1.3.6.1.4.1.3902.1082.150.1.2.2.3 · 1 row entry · 20 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnMdiMonitorStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MDI-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MDI-MIB::zxAnMdiMonitorStatsTable' 
MDI monitoring statistic table.
zxAnMdiMonitorStatsEntry row .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1
MDI monitoring statistic entry.
Indexes
Column Syntax OID
zxAnMdiMonitorStatsSequenceId
The sequence ID of MDI monitoring statistic record.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.1
zxAnMdiMonitorStatsMaxDf
The maximum delay factor of the records in the statistic period.
MillisecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.2
zxAnMdiMonitorStatsMinDf
The minimum delay factor of the records in the statistic period.
MillisecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.3
zxAnMdiMonitorStatsAvgDf
The average delay factor of the records in the statistic period.
MillisecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.4
zxAnMdiMonitorStatsMaxMlr
The maximum media loss rate of the records in the statistic
period.
ppsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.5
zxAnMdiMonitorStatsMinMlr
The minimum media loss rate of the records in the statistic
period.
ppsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.6
zxAnMdiMonitorStatsAvgMlr
The average media loss rate of the records in the statistic
period.
ppsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.7
zxAnMdiMonitorStatsMltLast15M
The total number of media packets lost in last 15 minutes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.8
zxAnMdiMonitorStatsMltLast24H
The total number of media packets lost in last 24 hours.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.9
zxAnMdiMonitorStatsMaxVideoMos
The maximum video mean opinion score of the records in the
statistic period.
This data format supports a range from 0 to 5.0 with granularity
of 0.1.
Integer32
Constraints:
range: 0-50
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.10
zxAnMdiMonitorStatsMinVideoMos
The minimum video mean opinion score of the records in the
statistic period.
This data format supports a range from 0 to 5.0 with granularity
of 0.1.
Integer32
Constraints:
range: 0-50
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.11
zxAnMdiMonitorStatsAvgVideoMos
The average video mean opinion score of the records in the
statistic period.
This data format supports a range from 0 to 5.0 with granularity
of 0.1.
Integer32
Constraints:
range: 0-50
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.12
zxAnMdiMonitorStatsMaxPlr
The maximum PLR (Packet Loss Rate) of the records in the statistic
period.
ppsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.13
zxAnMdiMonitorStatsMinPlr
The minimum PLR (Packet Loss Rate) of the records in the statistic
period.
ppsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.14
zxAnMdiMonitorStatsAvgPlr
The average PLR (Packet Loss Rate) of the records in the statistic
period.
ppsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.15
zxAnMdiMonitorStatsStartPktSeqId
The sequence ID of the starting packet in the statistic period.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.16
zxAnMdiMonitorStatsEndPktSeqId
The sequence ID of the ending packet in the statistic period.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.17
zxAnMdiMonitorStatsLossPkts
The total number of lost media packets in the statistic period.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.18
zxAnMdiMonitorStatsErrorPkts
The total number of errored media packets in the statistic
period.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.19
zxAnMdiMonitorStatsDuplicatePkts
The total number of duplicated media packets in the statistic
period.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.150.1.2.2.3.1.20

zxAnMdiMonitorVideoPrfTable

table
.1.3.6.1.4.1.3902.1082.150.1.2.2.4 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnMdiMonitorVideoPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-MDI-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-MDI-MIB::zxAnMdiMonitorVideoPrfTable' 
MDI monitoring video profile table.
zxAnMdiMonitorVideoPrfEntry row .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1
MDI monitoring video profile entry.
Indexes
Column Syntax OID
zxAnMdiMonVideoPrfName
The video profile name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.1
zxAnMdiMonVideoCodec
The video codec.
Enumerationr/w
Enumerated Values:
1mpeg4
2h264
 .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.2
zxAnMdiMonVideoResolution
The video resolution.
Enumerationr/w
Enumerated Values:
1qcif
2qvga
3hvga
 .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.3
zxAnMdiMonVideoFrameRate
The video frame rate.
0.1 frame/secondInteger32r/w
Constraints:
range: 10-300
 .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.4
zxAnMdiMonVideoPlc
The video PLC (Packet Loss Concealment).
Enumerationr/w
Enumerated Values:
1slicing
2freezing
 .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.5
zxAnMdiMonVideoRtpPayloadType
The payload type of RTP (Real-time Transport Protocol) packet.
Integer32r/w
Constraints:
range: 1-127
 .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.6
zxAnMdiMonVideoBufferDuration
The buffering duration.
MillisecondsInteger32r/w
Constraints:
range: 10-100
 .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.7
zxAnMdiMonVideoPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.150.1.2.2.4.1.50