ZTE-AN-LST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
12

zxAnLstGroupTable

table
.1.3.6.1.4.1.3902.1082.40.85.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnLstGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-LST-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-LST-MIB::zxAnLstGroupTable' 
This table includes the managed objects of the link status 
transmission group.
zxAnLstGroupEntry row .1.3.6.1.4.1.3902.1082.40.85.2.1.1
An entry in zxAnLstGroupTable.
Indexes
Column Syntax OID
zxAnLstGroupIndex
The index of LST group.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.1
zxAnLstGroupName
The name of LST group.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.2
zxAnLstGroupWorkingStatus
The working status of LST group.
Enumeration
Enumerated Values:
1working
2nonworking
11unknown
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.3
zxAnLstNextHopIpType
The next hop IP type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.4
zxAnLstNextHopIp
The next hop IP. Only IPv4 is supported now. If it is 0.0.0.0,
LST will not check the link of next hop.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.5
zxAnLstLinkDetectRetries
The retries of link detection.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.6
zxAnLstLinkDetectInterval
The interval of link detection.
SecondsInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.7
zxAnLstIpLinkStatus
The status of IP link.
Enumeration
Enumerated Values:
1up
2down
3detecting
11unknown
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.8
zxAnLstSwapReason
The swap reason.
failback: uplink port is recovered.
failoverByPhyLinkDown: uplink port is in fault of physical layer.
failoverByIpLinkDown: uplink port is in fault of IP layer.
Enumeration
Enumerated Values:
1noSwapping
2failback
3failoverByPhyLinkDown
4failoverByIpLinkDown
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.9
zxAnLstGroupRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.85.2.1.1.50

zxAnLstSmartgroupIfTable

table
.1.3.6.1.4.1.3902.1082.40.85.2.2 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnLstSmartgroupIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-LST-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-LST-MIB::zxAnLstSmartgroupIfTable' 
This table includes the smartgroup interface of the link status 
transmission group.
zxAnLstSmartgroupIfEntry row .1.3.6.1.4.1.3902.1082.40.85.2.2.1
An entry in zxAnLstSmartgroupIfTable.
Indexes
Column Syntax OID
zxAnLstSmartgroupIfRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.85.2.2.1.50

zxAnLstUserPortsTable

table
.1.3.6.1.4.1.3902.1082.40.85.2.3 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnLstUserPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-LST-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-LST-MIB::zxAnLstUserPortsTable' 
This table includes the user ports of the link status 
transmission group.
zxAnLstUserPortsEntry row .1.3.6.1.4.1.3902.1082.40.85.2.3.1
An entry in zxAnLstUserPortsTable.
Indexes
Column Syntax OID
zxAnLstUserPortsRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.40.85.2.3.1.50