ZTE-AN-LOOPBACKDETECT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
10

zxAnLoopbackDetectIfConfTable

table
.1.3.6.1.4.1.3902.1082.80.20.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnLoopbackDetectIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-LOOPBACKDETECT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfConfTable' 
This table represents the interface loopback detection 
configuration.
zxAnLoopbackDetectIfConfEntry row .1.3.6.1.4.1.3902.1082.80.20.2.2.1
An entry in zxAnLoopbackDetectIfConfTable.
Only physical port can be configured.
Indexes
Column Syntax OID
zxAnLoopbackDetectIfEnable
Indicate the interface switch of loopback detection function.
enabled(1) means the interface switch is on,
disabled(2) means the interface switch is off.
For non-C600 series, the default value is disabled.
For C600 seri…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.80.20.2.2.1.1
zxAnLoopbackDetectIfActiveEnable
Indicate the interface switch of the active loopback detection
function.
enabled(1) means the switch is on,
disabled(2) means the switch is off.
For C600 series, the default value is enabled.
For non-C600 series, the d…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.80.20.2.2.1.2
zxAnLoopbackDetectIfStartVid
The starting VLAN ID of the active loopback detection.
A value of '65535' means that the starting VLAN ID is not
configured.
Integer32r/w
Constraints:
range: 1-4094
range: 65535-65535
 .1.3.6.1.4.1.3902.1082.80.20.2.2.1.3
zxAnLoopbackDetectIfEndVid
The ending VLAN ID of the active loopback detection.
A value of '65535' means that the ending VLAN ID is not
configured.
zxAnLoopbackDetectIfEndVid must be greater than or equal to
zxAnLoopbackDetectIfStartVid.
Only …
Integer32r/w
Constraints:
range: 1-4094
range: 65535-65535
 .1.3.6.1.4.1.3902.1082.80.20.2.2.1.4
zxAnLoopbackDetectIfConfMode
The configured loopback detection mode.
autoDetection means the loopback detection VLAN ID is specified by
the VLAN translation configuration in user-side and the VLAN member
list in network-side.
userSpecifiedVid mean…
Enumerationr/w
Enumerated Values:
1autoDetection
2userSpecifiedVid
 .1.3.6.1.4.1.3902.1082.80.20.2.2.1.5

zxAnLoopbackDetectIfStatusTable

table
.1.3.6.1.4.1.3902.1082.80.20.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnLoopbackDetectIfStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-LOOPBACKDETECT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackDetectIfStatusTable' 
This table represents the loopbacked interfaces.
zxAnLoopbackDetectIfStatusEntry row .1.3.6.1.4.1.3902.1082.80.20.2.3.1
An entry in zxAnLoopbackDetectIfStatusTable.
Indexes
Column Syntax OID
zxAnLoopbackDetectVid
Indicate the VLAN ID when the interface is loopbackd.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1082.80.20.2.3.1.1
zxAnLoopbackDetectIfStatus
Indicate the interface status when the interface is loopbackd:
loopbacked(1) means the interface is loopbacked,
interfaceShutdown(2) means the interface is loopbacked,
and shutdown the upstream flow,
loopbackCleared(3)…
Enumeration
Enumerated Values:
1loopbacked
2interfaceShutdown
3loopbackCleared
4suspectedLoopback
 .1.3.6.1.4.1.3902.1082.80.20.2.3.1.2

zxAnLoopbackManualDetectIfTable

table
.1.3.6.1.4.1.3902.1082.80.20.2.4 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnLoopbackManualDetectIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-LOOPBACKDETECT-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-LOOPBACKDETECT-MIB::zxAnLoopbackManualDetectIfTable' 
This table provides the parameters to start an interface manual 
loopback detection.
The parameters cann't be read after starting the detection.
zxAnLoopbackManualDetectIfEntry row .1.3.6.1.4.1.3902.1082.80.20.2.4.1
An entry in zxAnLoopbackManualDetectIfTable.
Indexes
Column Syntax OID
zxAnLoopbackManualDetectIfAction
The interface manual loopback detection action.
Enumerationr/w
Enumerated Values:
1start
 .1.3.6.1.4.1.3902.1082.80.20.2.4.1.1
zxAnLoopbackManualDetectIfVid
The VLAN ID of the interface manual loopback detection.
A value of '65535' means that the VLAN ID is not configured.
Integer32r/w
Constraints:
range: 1-4094
range: 65535-65535
 .1.3.6.1.4.1.3902.1082.80.20.2.4.1.2
zxAnLoopbackManualDetectIfPkts
The packet number of the interface manual loopback detection.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.3902.1082.80.20.2.4.1.3