ZTE-AN-GPON-ONUPRF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
25
Rows
25
Columns
152

zxAnGponOPTcontTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPTcontTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPTcontTable' 
The ONU profile T-CONT table.
zxAnGponOPTcontEntry row .1.3.6.1.4.1.3902.1082.500.21.2.1.2.1
The ONU profile T-CONT entry.
Indexes
Column Syntax OID
zxAnGponOPName
Name of ONU profile.
SNMPv2-TCDisplayString
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.1
zxAnGponOPTcontIndex
An arbitrary (unique) integer for identifying an entry
in the table, from 1 to upper limit supported T-CONT count of
ONU type.
ZTE-AN-PON-TC-MIBZxAnGponOnuTcontIndex
Description:
ZxAnGponOnuTcontIndex reprensents the index of T-CONT in ONU,
from 1 to upper limit supported T-CONT count of ONU type.
 .1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.2
zxAnGponOPTcontName
Name of the T-CONT.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.3
zxAnGponOPTcontBwPrfName
The name of profile used by T-CONT bandwidth configuration.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.4
zxAnGponOPTcontDbaGapMode
The DBA gap mode.
For GPON ONU, the explanations of these modes are as follows:
mode0 is one frame,
mode1 is two frames,
mode2 is four frames,
mode3 is eight frames.
default is the system default policy.
F…
Enumerationr/w
Enumerated Values:
1mode0
2mode1
3mode2
4mode3
11default
 .1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.5
zxAnGponOPTcontRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.1.2.1.50

zxAnGponOPGemPortTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPGemPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPGemPortTable' 
The ONU profile GEM port table.
zxAnGponOPGemPortEntry row .1.3.6.1.4.1.3902.1082.500.21.2.1.3.1
The ONU profile GEM port entry.
Indexes
Column Syntax OID
zxAnGponOPGemPortIndex
An arbitrary (unique) integer for identifying an entry
in the table, from 1 to upper limit supported GEM port count of
ONU type.
ZTE-AN-PON-TC-MIBZxAnGponOnuGemPortIndex
Description:
ZxAnGponOnuGemPortIndex reprensents the index of GEM port in ONU,
from 1 to upper limit supported GEM port count of ONU type.
 .1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.1
zxAnGponOPGemPortName
Name of the GEM port.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.2
zxAnGponOPGemPortTcontIndex
It is equal to the 'zxAnGponOPTcontIndex'
of 'zxAnGponOPTcontTable'.
ZTE-AN-PON-TC-MIBZxAnGponOnuTcontIndexr/w
Description:
ZxAnGponOnuTcontIndex reprensents the index of T-CONT in ONU,
from 1 to upper limit supported T-CONT count of ONU type.
 .1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.3
zxAnGponOPGemPortQueueOfTcont
The queue (index from 0 to 7) of T-CONT for this GEM port.
Queue 7 is the highest priority queue.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.4
zxAnGponOPGemPortEncrypt
The encrypt state of this GEM port.
Enumerationr/w
Enumerated Values:
1downstreamEncrypt
2noEncrypt
3bothDirectEncrypt
 .1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.5
zxAnGponOPGemPortRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

In particular, a newly created row cannot be created
until the correspond…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.1.3.1.50

zxAnGponOPMappingTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPMappingTable' 
The ONU profile mapping table.
zxAnGponOPMappingEntry row .1.3.6.1.4.1.3902.1082.500.21.2.1.4.1
The ONU profile mapping entry.
Indexes
Column Syntax OID
zxAnGponOPMappingName
Name of service.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.1
zxAnGponOPMappingGemPort
GEM port index of service.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.2
zxAnGponOPMappingIfId
4bytes value contains:type (MSB 2bytes)/ifId (LSB 2bytes).
type means
0 bridge
1 ethuni
2 iphost
3 wifiuni
4 veip
5 wan

If type is 'bridge', then the 2-byte ifId has no mea…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.3
zxAnGponOPMappingType
Map type of service.
- cos: mapping to GEM port by CoS value
- vlan: mapping to GEM port by VLAN value
- cosAndVlan: mapping to GEM port by both cos and VLAN value
- transparent: mapping to GEM port transparently
- unta…
Enumerationr/w
Enumerated Values:
1cos
2vlan
3cosAndVlan
4transparent
5untag
 .1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.4
zxAnGponOPMappingCos
A bitfield defines the frames with the priority related with this
service. MSB stands for priority 7, LSB stands for priority 0.
A bit value of 0 specifies that frames with the associated priority
are to be discarded.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.5
zxAnGponOPMappingVid
Each 2 bytes stand for the VLAN ID related with this service.
The first N*2 bytes are valid, until VLAN ID=0.
OctetStringr/w
Constraints:
range: 24-24
 .1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.6
zxAnGponOPMappingRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.1.4.1.50

zxAnGponOPOnuConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPOnuConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPOnuConfTable' 
The ONU profile ONU configuration table.
zxAnGponOPOnuConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.1.5.1
The ONU profile ONU configuration entry.
Indexes
Column Syntax OID
zxAnGponOPOnuConfVportMode
The VPort mode.
gemport(1): a related VPort will be created automatically when a
GEM port is created.
manual(3): VPort will be created manually.
Enumerationr/w
Enumerated Values:
1gemport
3manual
 .1.3.6.1.4.1.3902.1082.500.21.2.1.5.1.1
zxAnGponOPOnuConfUsFecEnable
Enables or disables the ONU upstream FEC function.
enabled(1): enable the ONU upstream FEC function.
disabled(2): disable the ONU upstream FEC function.
auto(3): system will enable or disable the ONU upstream FEC
…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3auto
4default
 .1.3.6.1.4.1.3902.1082.500.21.2.1.5.1.2

zxAnGponOPBpConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.1.6 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPBpConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPBpConfTable' 
The ONU profile VPort table.
zxAnGponOPBpConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.1.6.1
The ONU profile VPort entry.
Indexes
Column Syntax OID
zxAnGponOPBpVportId
VPort ID.
ZTE-AN-PON-TC-MIBZxAnGponOnuVportIndex
Description:
ZxAnGponOnuVportIndex reprensents the index of vport in ONU,
from 1 to 256.
 .1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.1
zxAnGponOPBpName
Name of the VPort.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.2
zxAnGponOPBpMapType
Map type of GEM port and VPort.
cos(1): mapping by CoS value.
vlan(2): mapping by VLAN value.
cosPlusVlan(3): mapping by CoS and VLAN value.
oneToOne(4): mapping is 1:1 between GEM port and VPort.
Enumerationr/w
Enumerated Values:
1cos
2vlan
3cosPlusVlan
4oneToOne
 .1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.3
zxAnGponOPBpRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:

To create a row in this table, a manager must
set this object to createAndGo(4).
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.1.6.1.50

zxAnGponOPBpMapConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPBpMapConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPBpMapConfTable' 
The ONU profile VPort mapping table.
zxAnGponOPBpMapConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.1.7.1
The ONU profile VPort mapping entry.
Indexes
Column Syntax OID
zxAnGponOPBpMapConfCos
A CoS value (0..7) referenced by a GEM port mapped to a VPort.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.1
zxAnGponOPBpMapConfVid
A VLAN ID referenced by a GEM port mapped to a VPort.
The value 65535 indicates the untagged frames.
When VPort mapping type is oneToOne(4) or cos(1), this value is 0.
Integer32
Constraints:
range: 65535-65535
range: 0-4094
 .1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.2
zxAnGponOPBpMapConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:

To create a row in this table, a manager must
set this object to createAndGo(4).
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.1.7.1.50

zxAnGponOPTcontQueueSchedTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.1.8 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPTcontQueueSchedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPTcontQueueSchedTable' 
The ONU profile T-CONT queue schedule table.
zxAnGponOPTcontQueueSchedEntry row .1.3.6.1.4.1.3902.1082.500.21.2.1.8.1
The ONU profile T-CONT queue schedule entry.
Indexes
Column Syntax OID
zxAnGponOPTcontQueueSchedPrfName
The T-CONT queue schedule profile name, this profile is
defined in zxAnGponRmTrafficSchedPrfTable. The empty string
indicates that no profile is bound to this T-CONT.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.1.8.1.1

zxAnGponOPGemPortCurrPerfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.1.9 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPGemPortCurrPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPGemPortCurrPerfTable' 
The ONU profile GPON GEM port current performance table.
zxAnGponOPGemPortCurrPerfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.1.9.1
The ONU profile GPON GEM port current performance entry.
Indexes
Column Syntax OID
zxAnGponOPGemPortCurrRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.1.9.1.50

zxAnGponOPVlanPortTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVlanPortTable' 
The ONU profile port VLAN table.
A table containing VLAN port information for VLANs
configured into the bridge by (local or network)
management,  specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded.
          
When a manager wants to create a VLAN port,it must comply
with the multi-variables usage rule that all the mib variables
related to same fuction must be in one snmp set operation, the
variables have two type: mandatory and optional.
          
Mandatory variables must be in the one snmp set operation.
Optional variables may be in the one snmp set operation with the
mandatory variables, but must not be used alone.
          
To modify a service port,  there are several cases base on the
variable zxAnGponOPVlanPortMode, and the mandatory and optional
variables for each case are different.
          
Case 1: to modify a VLAN port when zxAnGponOPVlanPortMode is
access(1):
- mandatoty:
zxAnGponOPVlanPortMode,
- optional :
zxAnGponOPVlanPortDefaultVid,
zxAnGponOPVlanPortDefaultCos,
          
Case 2: to modify a service port when zxAnGponOPVlanPortMode is
trunk(2):
- mandatoty:
zxAnGponOPVlanPortMode,
- optional :
          
Case 3: to modify a service port when zxAnGponOPVlanPortMode is
hybrid(3):
- mandatoty:
zxAnGponOPVlanPortMode,
- optional :
zxAnGponOPVlanPortDefaultVid,
zxAnGponOPVlanPortDefaultCos,
          
Case 4: to modify a service port when zxAnGponOPVlanPortMode is
transparent(4):
- mandatoty:
zxAnGponOPVlanPortMode,
- optional :
          
Case 5: to modify a service port when zxAnGponOPVlanPortMode is
none(5):
- mandatoty:
zxAnGponOPVlanPortMode,
- optional :
zxAnGponOPVlanPortEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.2.1
The ONU profile port VLAN entry.
Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port,
multicast GEM port, WAN and xDSL UNI.
Indexes
Column Syntax OID
zxAnGponOPVlanPortMode
The access mode of the port. There are five types:
- access: access mode of port access
- trunk: trunk mode of port access
- hybrid: hybrid mode of port access
- transparent: transparent mode of port access
- none: dele…
Enumerationr/w
Enumerated Values:
1access
2trunk
3hybrid
4transparent
5none
 .1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.3
zxAnGponOPVlanPortDefaultVid
The PVID of the port.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.4
zxAnGponOPVlanPortDefaultCos
The default priority of the port.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.5
zxAnGponOPVlanPortVlanList
The VLAN sequence of the port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.2.1.6

zxAnGponOPVlanPortCmdTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPVlanPortCmdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVlanPortCmdTable' 
The port VLAN operation command table.
This table is used for ONU profile.
zxAnGponOPVlanPortCmdEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.3.1
The port VLAN operation command entry.
Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port,
multicast GEM port, WAN and xDSL UNI.
Indexes
Column Syntax OID
zxAnGponOPVlanPortCmd
The command to operate VLAN list of 'zxAnGponOPVlanPortTable'.

The multi-variables binding rule should be complied with
when a manager configures port VLAN cmd. According to this rule,
all the related mib…
Enumerationr/w
Enumerated Values:
1addVlan
2delVlan
3addAllVlan
4delAllVlan
 .1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.1
zxAnGponOPVlanPortVid
The port VLAN ID.
This variable must comply with the multi-variables binding
rule described in 'zxAnGponOPVlanPortCmd'.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1082.500.21.2.2.3.1.2

zxAnGponOPVlanTransTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.4 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPVlanTransTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVlanTransTable' 
The ONU profile port VLAN translation table.
zxAnGponOPVlanTransEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.4.1
The ONU profile port VLAN translation entry.
Supporting Ethernet UNI, WiFi UNI, VEIP, GEM port,
multicast GEM port, WAN and xDSL UNI.
Indexes
Column Syntax OID
zxAnGponOPVlanTransUserVid
User VLAN ID for translation.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.1
zxAnGponOPVlanTransUserCos
User priority for translation, the range of priority is from 0
to 8, and '8' indicates no configuration.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.2
zxAnGponOPVlanTransCVid
Inner VLAN for VLAN translate, '0' indicates no translation.
The multi-variables binding rule should be complied with
when a manager configures port VLAN translate. According to this
rule, all the related mib variables …
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.3
zxAnGponOPVlanTransCtagCos
Inner VLAN priority for VLAN translate, '8' indicates no
translation.
This variable must comply with the multi-variables binding
rule described in 'zxAnGponOPVlanTransCVid'.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.4
zxAnGponOPVlanTransSVid
Outer VLAN for VLAN translate, '0' indicates no SVLAN.
This variable must comply with the multi-variables binding
rule described in 'zxAnGponOPVlanTransCVid'.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.5
zxAnGponOPVlanTransStagCos
Outer VLAN priority for VLAN translate, '8' indicates copy priority
from inner VLAN priority.
This variable must comply with the multi-variables binding
rule described in 'zxAnGponOPVlanTransCVid'.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.6
zxAnGponOPVlanTransRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

In particular, a newly created row cannot be created
until the correspond…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.2.4.1.50

zxAnGponOPMVlanTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.5 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPMVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPMVlanTable' 
The ONU profile multicast VLAN table.
zxAnGponOPMVlanEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.5.1
The ONU profile multicast VLAN entry.
Indexes
Column Syntax OID
zxAnGponOPMVid
This attribute represents the VLAN ID (1~4094).
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3902.1082.500.21.2.2.5.1.1
zxAnGponOPMVlanRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.2.5.1.50

zxAnGponOPIgmpConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.6 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPIgmpConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPIgmpConfTable' 
The ONU profile IGMP configuration table.
zxAnGponOPIgmpConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.6.1
The ONU profile IGMP configuration entry.
Supporting Ethernet UNI and VEIP.
Indexes
Column Syntax OID
zxAnGponOPIgmpUsedPrfName
This attribute points to an instance of the multicast operations
profile.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.1
zxAnGponOPIgmpMaxGroups
This attribute specifies the maximum number of dynamic multicast
groups that may be replicated to the client port at any one time.
The default value 0 specifies that no administrative limit is to
be imposed.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.2
zxAnGponOPIgmpMaxBw
This attribute specifies the maximum imputed dynamic bandwidth,
in kbps, that may be delivered to the client port at
any one time.
The default value 0 specifies that no administrative limit is to
be imposed.
kbpsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.3
zxAnGponOPIgmpBwEnforce
enabled: attempts to exceed the max multicast bandwidth
be counted and denied.
disabled: such attempts be counted but honored.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.4
zxAnGponOPIgmpConfRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.2.6.1.50

zxAnGponOPTrafficSchedTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.7 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPTrafficSchedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPTrafficSchedTable' 
The ONU profile traffic scheduler configuration table.
zxAnGponOPTrafficSchedEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.7.1
The ONU profile traffic scheduler configuration entry.
Supporting Ethernet UNI.
Indexes
Column Syntax OID
zxAnGponOPTrafficSchedPrfName
The ONU UNI traffic scheduler profile name.
The empty string indicates no profile is bounded.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.7.1.1

zxAnGponOPExtVlanTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.8 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPExtVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPExtVlanTable' 
The ONU profile extended VLAN configuration table.
zxAnGponOPExtVlanEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.8.1
The ONU profile extended VLAN configuration entry.
Indexes
Column Syntax OID
zxAnGponOPExtVlanInputTpid
This attribute gives the special TPID value for operations
on the input (filtering) side of the table. Typical values
include 0x8a88 and 0x9100. Default value is 0x8100.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.1
zxAnGponOPExtVlanOutputTpid
This attribute gives the special TPID value for operations
on the output (tagging) side of the table. Typical values
include 0x8a88 and 0x9100. Default value is 0x8100.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.2
zxAnGponOPExtVlanDsMode
Regardless of its association, the extended VLAN tagging
operation configuration data ME pertains to upstream traffic.
This attribute specifies the mode for downstream mapping.
1 The operation performed in the downstrea…
Enumerationr/w
Enumerated Values:
1inverseUpstream
2noOperation
3inverseVlanAndPriOthersForward
4inverseVlanOthersForward
5inversePriOthersForward
6inverseVlanAndPriOthersDiscard
7inverseVlanOthersDiscard
8inversePriOthersDiscard
9discard
 .1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.3
zxAnGponOPExtVlanDscp2CosPrf
This attribute refers to 'zxAnGponRmDscp2CosPrfName', specifies
mapping from DSCP to P-bits. The attribute can be considered a
bit string sequence of 64 3-bit groups. The 64 sequence entries
represent the possible value…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.4
zxAnGponOPExtVlanRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.2.8.1.50

zxAnGponOPExtVlanRuleConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.9 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPExtVlanRuleConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPExtVlanRuleConfTable' 
The ONU profile extended VLAN rule configuration table.
zxAnGponOPExtVlanRuleConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.9.1
The ONU profile extended VLAN rule configuration entry.
Indexes
Column Syntax OID
zxAnGponOPExtVlanConfFiltRule
This attribute refers to 'zxAnGponRmFiltRuleName'
provides a unique profile of filter for this extended VLAN table.
SNMPv2-TCDisplayString
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.1
zxAnGponOPExtVlanConfTreatRule
This attribute refers to 'zxAnGponRmTrtRuleName'
provides a unique profile of treatment for this extended VLAN
table.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.2
zxAnGponOPExtVlanConfRowStatus
The status of this conceptual row.
The state of this conceptual row only support
'not exist' and 'active'.
The action of this conceptual row only support
'createAndGo' and 'destroy'.

To create a row in t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.2.9.1.50

zxAnGponOPBrgConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.10 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPBrgConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPBrgConfTable' 
The ONU profile bridge configuration table.
zxAnGponOPBrgConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1
The ONU profile bridge configuration entry.
Indexes
Column Syntax OID
zxAnGponOPBrgIndex
This attribute indicates the index of MAC bridge in ONU, from 1 to
65535. The first byte specifies the slot ID associated with this
MAC bridge, the second byte specifies the bridge group ID
associated with this MAC br…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.1
zxAnGponOPBrgStpEnable
This attribute indicates whether or not a spanning tree
algorithm is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.2
zxAnGponOPBrgLearningEnable
This attribute indicates whether or not the learning
function of the bridge is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.3
zxAnGponOPBrgLocalBridgeEnable
This attribute indicates whether or not the bridging between UNI
ports is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.4
zxAnGponOPBrgPri
This attribute specifies the bridge priority in the range 0..65535.
The value of this attribute is copied to the bridge priority
attribute of the associated MAC bridge configuration data managed
entity.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.5
zxAnGponOPBrgMaxAge
This attribute indicates the maximum age for an entry in the
spanning tree listing. It indicates the maximum
age in seconds for received protocol information before
it is discarded.
SecondsInteger32r/w
Constraints:
range: 6-40
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.6
zxAnGponOPBrgHelloTime
This attribute provides the time interval between hello packets.
It is the time interval, in seconds, that a bridge advertises its
presence while as a root or attempting to become a root.
SecondsInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.7
zxAnGponOPBrgForwardDelay
This attribute gives the time that the
bridge on the Ethernet card in the ONU retains a packet before
forwarding it. (It indicates the value in seconds that
the bridge uses for Forward Delay when the bridge acts as the
…
SecondsInteger32r/w
Constraints:
range: 4-30
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.8
zxAnGponOPBrgUnknownMacDiscard
This attribute indicates the treatment of MAC frames with
unknown destination addresses.
enabled: frames with unknown destination addresses will be
discarded.
disabled: frames with unknown destination addresses …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.9
zxAnGponOPBrgMacLearningDepth
This attribute specifies the maximum number of UNI MAC addresses
to be learned by the bridge.
The default value 0 specifies that there is no
administratively-imposed limit.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.10
zxAnGponOPBrgAgingTime
This attribute specifies the age of dynamic filtering entries in
the bridge database, after which unrefreshed entries are discarded.
In accordance with [IEEE 802.1D] clause 7.9.2 and [IEEE 802.1Q]
clause 8.8.3, the rang…
SecondsInteger32r/w
Constraints:
range: 10-1000000
 .1.3.6.1.4.1.3902.1082.500.21.2.2.10.1.11

zxAnGponOPWanIpConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.11 · 1 row entry · 14 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPWanIpConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPWanIpConfTable' 
The ONU profile WAN IP configuration table.
zxAnGponOPWanIpConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1
The ONU profile WAN IP configuration entry.
Indexes
Column Syntax OID
zxAnGponOPWanIpIndex
The ID of WAN IP.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.1
zxAnGponOPWanIpMode
IP address configuration mode.
Enumerationr/w
Enumerated Values:
2dhcp
3pppoe
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.2
zxAnGponOPWanVlanPrf
The name of table 'zxAnGponOPVlanPrfTable'.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.3
zxAnGponOPWanHostId
The ONU IP host ID. The value 0 indicates this attribute
is not configured.
The following IP host ID format is defined:
MSB : Most Significant Byte
LSB : Least Significant Byte
| MSB | B…
Integer32r/w
Constraints:
range: 0-33023
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.4
zxAnGponOPWanOnuIdentifier
A unique ONU identifier string. This string, if set is provided as
part of the DHCP request to allow an alternative to MAC Address in
retrieving the DHCP parameters of the specified ONU.
This attribute is related to 'zx…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.5
zxAnGponOPWanPppoeAuthMode
This attribute is related to 'zxAnGponOPWanIpMode', and
it is valid only when 'zxAnGponOPWanIpMode' is PPPoE.
Enumerationr/w
Enumerated Values:
1auto
2chap
3pap
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.6
zxAnGponOPWanPppoeUsername
This attribute is related to 'zxAnGponOPWanIpMode', and it is
valid only when 'zxAnGponOPWanIpMode' is PPPoE.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.7
zxAnGponOPWanPppoePassword
This attribute is related to 'zxAnGponOPWanIpMode', and it is
valid only when 'zxAnGponOPWanIpMode' is PPPoE.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.8
zxAnGponOPWanRspPing
This attribute indicates whether respond to pings enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.9
zxAnGponOPWanRspTraceRoute
This attribute indicates whether respond to trace route enabled.
This attribute is only valid for IPv4 and this value is
disabled(2) for IPv6.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.10
zxAnGponOPWanRsEnable
This attribute indicates whether respond to router
solicitation (RS) messages enabled.
This attribute is only valid for IPv6 and this value is
disabled(2) for IPv4.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.11
zxAnGponOPWanOnLinkPrefix
It is the manually provisioned on-link prefix used for destination
IPv6 addresses of IPv6 host services. The attribute is structured
as follows:
Prefix length, number of leading bits in the prefix that are valid
(1 …
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.12
zxAnGponOPWanPppoeServiceName
The PPPoE service name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-60
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.13
zxAnGponOPWanIpConfRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.2.11.1.50

zxAnGponOPVoipConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.12 · 1 row entry · 14 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPVoipConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVoipConfTable' 
The ONU profile VoIP configuration table.
zxAnGponOPVoipConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1
The ONU profile VoIP configuration entry.
Indexes
Column Syntax OID
zxAnGponOPVoipSignalProtoUsed
This attribute indicates the type of VoIP signaling protocol used
for ONU. Only one type of protocol is allowed. Valid values are:
0x01 = None
0x02 = SIP
0x03 = H.248
0x04 = MGCP
0x05 = Selected by Non-OMCI.
Enumerationr/w
Enumerated Values:
1none
2sip
3h248
4mgcp
5nonOmci
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.1
zxAnGponOPVoipConfMethodUsed
This attribute indicates the ONU configuration method.
0x01 the ONU default - do not configure.
0x02 indicate use of OMCI for VoIP service configuration of
the ONU.
0x03 indicate use of configuration file retrieval…
Enumerationr/w
Enumerated Values:
1default
2omci
3configFile
4tr069
5ietf
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.2
zxAnGponOPVoipDomainName
This attribute indicates the ONU domain name that is used to locate
ONU by SS when the mode of MG registered to SS is using domain
name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.3
zxAnGponOPVoipH248EquipName
This attribute indicates the ONU equipment name that is used to
locate ONU by SS when the mode of MG registered to SS is using
equipment name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.4
zxAnGponOPVoipH248RegMode
This attribute indicates the MID flag.
Enumerationr/w
Enumerated Values:
1ipv4
2domainName
3equipmentName
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.5
zxAnGponOPVoipMgcRegMode
This attribute indicates the register mode.
Enumerationr/w
Enumerated Values:
1wildcard
2individual
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.6
zxAnGponOPVoipLineName
This attribute indicates the line name sequence number.
The default value is the empty string.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.7
zxAnGponOPVoipIpAllocMode
This attribute indicates the VoIP allocate mode.
Enumerationr/w
Enumerated Values:
1singleIp
2dualIp
3multiIp
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.8
zxAnGponOPVoipSvrAddr
This attribute indicates the address of the server to contact
using the method indicated in the VoIP configuration method used
attribute. This attribute is only relevant for non-OMCI
configuration methods. If this attri…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.9
zxAnGponOPVoipSvrValidation
This attribute indicates the user validation scheme.
Enumerationr/w
Enumerated Values:
1disabled
2md5
3basic
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.10
zxAnGponOPVoipSvrUsername
This attribute indicates the user name for validation.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-50
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.11
zxAnGponOPVoipSvrPassword
This attribute indicates the password for validation.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.12
zxAnGponOPVoipSvrRealm
This attribute indicates a string to be displayed to users so they
know which user name and password to use. This string should
contain at least the name of the host performing the authentication
and might additiona…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.13
zxAnGponOPVoipSvrRetrieveFile
This attribute indicates an action. It will be set independently
to notify ONU to retrieve file again.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.12.1.14

zxAnGponOPVoipIpConfTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.13 · 1 row entry · 19 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPVoipIpConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVoipIpConfTable' 
The ONU profile VoIP IP configuration table.
zxAnGponOPVoipIpConfEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1
The ONU profile VoIP IP configuration entry.
Indexes
Column Syntax OID
zxAnGponOPVoipIpSlotId
This attribute indicates the index of slot in ONU.
If slot ID is zero, it means the ONU is box-type,
which can not plug card.
Integer32
Constraints:
range: 0-16
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.1
zxAnGponOPVoipIpMediaIndex
This attribute indicates the whether the separation of media
and signaling. If 'media' is configured,The media will use a
separation IP address, otherwise media and signaling will share
the same IP address.
Enumeration
Enumerated Values:
1signalAndMedia
2media
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.2
zxAnGponOPVoipIpMode
This attribute indicates the IP address configuration mode.
Enumerationr/w
Enumerated Values:
1static
2dhcp
3pppoe
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.3
zxAnGponOPVoipIpPrf
This attribute indicates the VoIP IP profile Name, it refers to
'zxAnGponRmIpPrfName'. If no profile name is indicated, this
attribute is set to a empty string.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.4
zxAnGponOPVoipIpVlanPrf
This attribute indicates the VoIP IP VLAN profile Name, it refers
to 'zxAnGponRmVlanPrfName'.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.5
zxAnGponOPVoipIpHostId
This attribute indicates the ONU VoIP host ID.
The value 0 indicates this attribute is not configured.
The following VoIP host ID format is defined:
MSB : Most Significant Byte
LSB : Least Significant Byte…
Integer32r/w
Constraints:
range: 0-33023
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.6
zxAnGponOPVoipIpOnuIdentifier
This attribute indicates the ONU identifier string.
This attribute is relation to 'zxAnGponOPVoipIpMode'.
This attribute is valid only when 'zxAnGponOPVoipIpMode' is DHCP.
A unique ONU identifier string. If set to a …
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.7
zxAnGponOPVoipIpAddrType
This attribute indicates the type of IP address denoted
in zxAnGponOPVoipIpAddr object.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.8
zxAnGponOPVoipIpAddr
This attribute indicates the VoIP IP address.
This attribute is relation to 'zxAnGponOPVoipIpMode'.
This attribute is valid only when 'zxAnGponOPVoipIpMode'
is static.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.9
zxAnGponOPVoipIpAddrPfxLen
This attribute indicates the VoIP IP address prefix length.
This attribute is only valid for IPv4 and this value is 0
for IPv6.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.10
zxAnGponOPVoipIpPppoeMode
This attribute indicates the VoIP IP PPPoE mode.
This attribute is relation to 'zxAnGponOPVoipIpMode'.
This attribute is valid only when 'zxAnGponOPVoipIpMode' is PPPoE.
Enumerationr/w
Enumerated Values:
1auto
2chap
3pap
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.11
zxAnGponOPVoipIpPppoeUsername
This attribute indicates the VoIP IP PPPoE user name.
This attribute is relation to 'zxAnGponOPVoipIpMode'.
This attribute is valid only when 'zxAnGponOPVoipIpMode' is PPPoE.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.12
zxAnGponOPVoipIpPppoePassword
This attribute indicates the VoIP IP PPPoE password.
This attribute is relation to 'zxAnGponOPVoipIpMode'.
This attribute is valid only when 'zxAnGponOPVoipIpMode' is PPPoE.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.13
zxAnGponOPVoipIpRspPing
This attribute indicates whether respond to pings enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.14
zxAnGponOPVoipIpRspTraceRoute
This attribute indicates whether respond to trace route enabled.
This attribute is only valid for IPv4 and this value is
disabled(2) for IPv6.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.15
zxAnGponOPVoipIpRsEnable
This attribute indicates enabling or disabling response to router
solicitation (RS) messages function. This attribute is only valid
for IPv6 and this value is disabled(2) for IPv4.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.16
zxAnGponOPVoipIpOnLinkPrefix
This attribute indicates the manually provisioned on-link prefix
used for destination IPv6 addresses of IPv6 host services.
The attribute is structured as follows:
Prefix length, number of leading bits in the prefix …
OctetStringr/w
Constraints:
range: 17-17
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.17
zxAnGponOPVoipIpPppoeServiceName
This attribute indicates the PPPoE service name.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-60
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.18
zxAnGponOPVoipIpConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:

To create a row in this table, a manager must
set this object to createAndGo(4).
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.2.13.1.50

zxAnGponOPUniDhcpIpRetrieveTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.14 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPUniDhcpIpRetrieveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPUniDhcpIpRetrieveTable' 
The ONU profile Ethernet UNI's DHCP controlling configuration
table.
zxAnGponOPUniDhcpIpRetrieveEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.14.1
The ONU profile Ethernet UNI's DHCP controlling configuration
entry.
Indexes
Column Syntax OID
zxAnGponOPUniDhcpIpRetrieveMode
This attribute indicates the Ethernet UNI how to obtain its
IP address (from ONU or network), when ONU enables the DHCP server
function.
Enumerationr/w
Enumerated Values:
1noSpecify
2fromOnu
3fromNetwork
4forbidden
 .1.3.6.1.4.1.3902.1082.500.21.2.2.14.1.1

zxAnGponOPIpStaticRouteTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.15 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPIpStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPIpStaticRouteTable' 
This table contains information of ONU IP static routes
configuration. This managed entity stores IP static routes.
zxAnGponOPIpStaticRouteEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.15.1
It is entry in the zxAnGponOPIpStaticRouteTable. The index
'zxAnGponOPName' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponOPIpRouteDestType
The type of the 'zxAnGponOPIpRouteDest' address, as defined
in the InetAddress MIB.
Only those address types that may appear in an actual
routing table are allowed as values of this object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.1
zxAnGponOPIpRouteDest
The destination IP address of this route.
The type of this address is determined by the value of
the 'zxAnGponOPIpRouteDestType' object.
The values for the index objects 'zxAnGponOPIpRouteDest' and
'zxAnGponOPIpRoutePfx…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.2
zxAnGponOPIpRoutePfxLen
Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
zxAnGponOPIpRouteDest field.
The values for the index objects 'zxAnG…
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.3
zxAnGponOPIpRouteNextHopType
The type of the 'zxAnGponOPIpRouteNextHopType' address, as
defined in the InetAddress MIB.
Value should be set to unknown(0) for non-remote routes.
Only those address types that may appear in an actual
routing table ar…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.4
zxAnGponOPIpRouteNextHop
On remote routes, the address of the next system route.
For non-remote routes, a zero length string.
The type of this address is determined by the value of the
'zxAnGponOPIpRouteNextHopType' object.
This field is not us…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.5
zxAnGponOPIpRouteOutPort
The number of the IP port through which the next hop should be
reached. This field is used when the next hop is reached through
an unnumbered link and when a static route is set to support a
fully meshed network. The va…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.6
zxAnGponOPIpRouteRowStatus
The status of this conceptual row.
To create a row in this table, a manager must set this object to
createAndGo(4). In particular, a newly created row cannot be
created until the corresponding attributes from
'zxAnGponO…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.21.2.2.15.1.50

zxAnGponOPVeipTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.16 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPVeipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPVeipTable' 
zxAnGponOPVeipTable table.
This managed entity represents the data plane hand-off point in
an ONU to a separate (non-OMCI) management domain.
The virtual Ethernet interface point is managed by OMCI,
and is potentially known to the non-OMCI management domain.
One or more Ethernet traffic flows are present at this boundary.
zxAnGponOPVeipEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.16.1
GPON VEIP configuration entry. The index
'zxAnGponOPName' represents the normal ONU index or the virtual
ONU index for profile.
Indexes
Column Syntax OID
zxAnGponOPVeipIndex
This attribute uniquely identifies each instance
of this managed entity.
To facilitate easy discovery,
the ONU should assign IDs in the sequence 1, 2, ....
The values 0 and 0xFFFF are reserved and not used now.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.1
zxAnGponOPVeipAdminState
This attribute locks and unlocks the functions performed by
this managed entity.
Enumerationr/w
Enumerated Values:
1unlocked
2locked
 .1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.2
zxAnGponOPVeipInterdomainName
This attribute is a character string that provides an optional way
to identify the virtual Ethernet interface point
to a non-OMCI management domain.
The interface may also be identified by its managed entity ID,
IANA as…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.3
zxAnGponOPVeipIsPortAssigned
This attribute points to an instance of the TCP/UDP config data
managed entity, which provides for OMCI management of
the non-OMCI management domain's IP connectivity.
This attribute specifies whether to assign tcp or u…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.4
zxAnGponOPVeipProtoType
This attribute points to an instance of the TCP/UDP config data
managed entity, which provides for OMCI management of
the non-OMCI management domain's IP connectivity.
This attribute specifies the protocol used in IP co…
Enumerationr/w
Enumerated Values:
1tcp
2udp
 .1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.5
zxAnGponOPVeipAssignedPort
This attribute points to an instance of the TCP/UDP config data
managed entity, which provides for OMCI management of
the non-OMCI management domain's IP connectivity.
This attribute specifies the assigned tcp or udp po…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.6
zxAnGponOPVeipHostId
This attribute points to an instance of the TCP/UDP config data
managed entity, which provides for OMCI management of
the non-OMCI management domain's IP connectivity
when zxAnGponOPVeipIsTcpOrUdpPortAssigned is true.
T…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.16.1.7

zxAnGponOPTr069AcsTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.17 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPTr069AcsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPTr069AcsTable' 
zxAnGponOPTr069AcsTable table.
If functions within the ONU are managed by [BBF TR-69],
this ME allows OMCI configuration of the ACS URL
and related authentication information for an ACS connection
initiated by the ONU.
TR-69 supports other means to discover its ACS,
so not all TR-69-compatible ONUs necessarily support this ME.
Further, even if the ONU does support this ME,
some operators may choose not to use it.
zxAnGponOPTr069AcsEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.17.1
GPON Tr069 management server configuration entry. The index
'zxAnGponOPName' represents the normal ONU index or the virtual
ONU index for profile.
Indexes
Column Syntax OID
zxAnGponOPTr069AcsAdminState
This attribute locks and unlocks the functions performed
by this managed entity. When the administrative state is locked,
the functions of this ME are disabled.
TR-69 connectivity to an ACS may be possible through means…
Enumerationr/w
Enumerated Values:
1unlocked
2locked
 .1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.1
zxAnGponOPTr069AcsUri
This attribute points to the large string ME that contains
the network address.
It may contain a fully qualified domain name,
URI or IP address. The URI may also contain a port identifier,
eg x.y.z.com:5060.
A null poin…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.2
zxAnGponOPTr069AcsValidation
This attribute specifies the validation scheme used when the ONU
validates a challenge. Validation schemes are defined as follows:
1 Validation disabled.
2 Validate using MD5 digest authentication as defined in
[IE…
Enumerationr/w
Enumerated Values:
1disabled
2md5
3basic
 .1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.3
zxAnGponOPTr069AcsUsername
This string attribute is the user name. If the string is shorter
than 25 bytes, it must be null terminated.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-5
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.4
zxAnGponOPTr069AcsPassword
This string attribute is the password. If the string is shorter
than 25 bytes, it must be null terminated.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.5
zxAnGponOPTr069AcsRealm
This string attribute specifies the realm used in md5 digest
authentication. If the string is shorter than 25 bytes,
it must be null terminated.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-25
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.6
zxAnGponOPTr069AssociatedTag
This attribute is a TCI value for TR-69 management traffic
passing through the virtual ethernet interface point.
A TCI, comprising user priority, CFI and VID,
is represented by 2 bytes.
the first 3 bits represent priori…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.1082.500.21.2.2.17.1.7

zxAnGponOPEthUniTable

table
.1.3.6.1.4.1.3902.1082.500.21.2.2.18 · 1 row entry · 13 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOPEthUniTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-ONUPRF-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-ONUPRF-MIB::zxAnGponOPEthUniTable' 
The ONU profile Ethernet UNI configuration table.
zxAnGponOPEthUniEntry row .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1
The ONU profile Ethernet UNI configuration entry.
Indexes
zxAnGponOPName zxAnPonRmOnuUniIndex
Column Syntax OID
zxAnGponOPEthUniExpectedType
The following coding is used for this attribute:
0x00 = by autosensing, 0x01 to 0xFE (1 to 254) = one of the values
from table 3 that is compatible with the type of the LIM. Upon
autonomous instantiation, the value 0x00…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.1
zxAnGponOPEthUniIfSpeedConf
For 10/100 Base-Tx Ethernet interfaces, this attribute is used to
set the configuration options:
auto(1): Auto-sensing;
half10(2): 10BaseT (half duplex);
full10(3): 10BaseT (full duplex);
half100(4): 100BaseT (half dupl…
Enumerationr/w
Enumerated Values:
1auto
2half10
3full10
4half100
5full100
6full1000
7full10000
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.2
zxAnGponOPEthUniLoopbackConf
This attribute is used to set the Ethernet loopback configuration:
No loopback (value 0x01), loop3 (value 0x04, Loopback of downstream
traffic after PHY transceiver).
Enumerationr/w
Enumerated Values:
1noLoop
4loop3
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.3
zxAnGponOPEthUniAdminState
This attribute is used to activate (unlock: value 0x01) and
deactivate(lock: value 0x02) the functions performed by instances
of this managed entity.
Enumerationr/w
Enumerated Values:
1unlocked
2locked
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.4
zxAnGponOPEthUniMaxFrameSize
This attribute denotes the maximum allowed frame size to be
transmitted across this interface.
bytesInteger32r/w
Constraints:
range: 64-12288
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.5
zxAnGponOPEthUniDteOrDceInd
This attribute specifies the Ethernet interface wiring:
1 DCE or MDI-X (default).
2 DTE or MDI.
3 Automatic selection
Enumerationr/w
Enumerated Values:
1dce
2dte
3auto
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.6
zxAnGponOPEthUniPauseTime
This attribute allows the ONU line card to request that the
customer terminal temporarily suspend sending data. Units are in
pause quanta(1 pause_quantum equals 512 bits times of the
particular implementation).
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.7
zxAnGponOPEthUniBridgeOrIpInd
This attribute specifies whether the Ethernet interface is bridged
or derived from an IP router function.
1 Bridged
2 IP router
3 Depends on the parent circuit pack.

3 means that the circuit pack's bridge…
Enumerationr/w
Enumerated Values:
1bridged
2ipRouter
3either
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.8
zxAnGponOPEthUniArcEnable
This attribute allows the activation of alarm reporting control
(ARC) for this PPTP or cardholder. The attribute works in concert
with the ARC interval attribute.
enabled: enables ARC.
disabled: disables ARC.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.9
zxAnGponOPEthUniArcInterval
This attribute defines the interval to be used with the ARC
function for this PPTP or cardholder. The values 0 through 254
give the duration in minutes for the NALM-QI timer of M.3100.
The special value 255 means that t…
MinutesInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.10
zxAnGponOPEthUniPppoeFilter
This attribute may be used to control filtering of PPPoE packets
on this Ethernet port. The value 2 is used to disable filtering.
The value 1 is used to enable filtering. When filtering is
enabled, all packets other tha…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.11
zxAnGponOPEthUniPowerFeed
This attribute controls whether power is provided to an external
equipment over the Ethernet PPTP. Value 1 enables power over
Ethernet port. The default value 2 disables power feed.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.12
zxAnGponOPEthUniLoopDetect
This attribute enable or disable the loopback detection.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.21.2.2.18.1.13