ZTE-AN-ETH-CFM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
108

dot1agCfmMdTable

table
.1.3.6.1.4.1.3902.1015.60.1.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk dot1agCfmMdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ETH-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ETH-CFM-MIB::dot1agCfmMdTable' 
The Maintenance Domain table. Each row in the table
represents a different Maintenance Domain.
A Maintenance Domain is described in 802.1ag (3.22) as the
network or the part of the network for which faults in
connectivity are to be managed. The boundary of a Maintenance
Domain is defined by a set of DSAPs, each of which can become
a point of connectivity to a service instance.
dot1agCfmMdEntry row .1.3.6.1.4.1.3902.1015.60.1.1.2.1
The Maintenance Domain table entry. This entry is not lost
upon reboot. It is backed up by stable storage.
Indexes
Column Syntax OID
dot1agCfmMdIndex
The index to the Maintenance Domain table.
dot1agCfmMdTableNextIndex needs to be inspected to find an
available index for row-creation.
Referential integrity is required i.e. the index needs to be
persistent upon a rebo…
Unsigned32
Constraints:
range: 1-128
 .1.3.6.1.4.1.3902.1015.60.1.1.2.1.1
dot1agCfmMdFormat
The type (and thereby format) of the Maintenance Domain Name.
Dot1agCfmMaintDomainNameTyper/w
Type Values:
1none
2dnsLikeName
3macAddressAndUint
4charString
 .1.3.6.1.4.1.3902.1015.60.1.1.2.1.2
dot1agCfmMdName
The Maintenance Domain name. The type/format of this object
is determined by the value of the dot1agCfmMdNameType object.
Each Maintenance Domain has unique name amongst all those
used or available to a service provider…
Dot1agCfmMaintDomainNamer/w
Type Constraints:
range: 1..80
 .1.3.6.1.4.1.3902.1015.60.1.1.2.1.3
dot1agCfmMdMdLevel
The Maintenance Domain Level.
Dot1agCfmMDLevelr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.3902.1015.60.1.1.2.1.4
dot1agCfmMdMhfCreation
Enumerated value indicating whether the management entity can
create MHFs (MIP Half Function) for this Maintenance Domain.
Dot1agCfmMhfCreationr/w
Type Values:
1defMHFnone
2defMHFdefault
3defMHFexplicit
4defMHFdefer
 .1.3.6.1.4.1.3902.1015.60.1.1.2.1.5
dot1agCfmMdMhfIdPermission
Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this Maintenance Domain. Since, in this
variable, there is no encompassing Maintenance Doma…
Dot1agCfmIdPermissionr/w
Type Values:
1sendIdNone
2sendIdChassis
3sendIdManage
4sendIdChassisManage
5sendIdDefer
 .1.3.6.1.4.1.3902.1015.60.1.1.2.1.6
dot1agCfmMdMaTableNextIndex
Value to be used as the index of the MA table entries for
this Maintenance Domain when the management entity wants to
create a new row in the MA table.
Dot1afCfmIndexIntegerNextFreer/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.1.2.1.7
dot1agCfmMdRowStatus
The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.60.1.1.2.1.8

dot1agCfmMaTable

table
.1.3.6.1.4.1.3902.1015.60.1.2.1 · 1 row entry · 11 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk dot1agCfmMaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ETH-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ETH-CFM-MIB::dot1agCfmMaTable' 
The Maintenance Association table. Each row in the table
represents an MA. An MA is a set of MEPs, each configured
with a single service instance.
Creation of a Service Instance establishes a connectionless
association among the selected DSAPs. Configuring a
Maintenance association End Point (MEP) at each of the
DSAPs creates a Maintenance Association (MA) to monitor
that connectionless connectivity. The MA is identified by a
Short MA Name that is unique within the Maintenance Domain
and chosen to facilitate easy identification of the Service
Instance. Together, the Maintenance Domain Name and the
Short MA Name form the Maintenance Association Identifier
(MAID) that is carried in CFM Messages to identify
incorrect connectivity among Service Instances. A small
integer, the Maintenance association End Point Identifier
(MEPID), identifies each MEP among those configured on a
single MA (802.1ag clauses 3.17 and 18.2).
This table uses two indices, first index is the index of the
Maintenance Domain table.
The writable objects in this table need to be persistent
upon reboot or restart of a device.
dot1agCfmMaEntry row .1.3.6.1.4.1.3902.1015.60.1.2.1.1
The MA table entry.
Indexes
Column Syntax OID
dot1agCfmMaIndex
Index of the MA table dot1agCfmMdMaTableNextIndex needs to
be inspected to find an available index for row-creation.
Unsigned32
Constraints:
range: 1-128
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.1
dot1agCfmMaPrimaryVlanId
The Primary VLAN ID with which the Maintenance Association is
associated, or 0 if the MA is not attached to any VID. If
the MA is associated with more than one VID, the
dot1agCfmVlanTable lists them.
VlanIdOrNone
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.2
dot1agCfmMaFormat
The type (and thereby format) of the Maintenance Association
Name.
Dot1agCfmMaintAssocNameTyper/w
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.3
dot1agCfmMaName
The Short Maintenance Association name. The type/format of
this object is determined by the value of the
dot1agCfmMaNameType object.
Dot1agCfmMaintAssocNamer/w
Type Constraints:
range: 1..80
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.4
dot1agCfmMaMhfCreation
Indicates if the Management entity can create MHFs (MIP Half
Function) for this MA.
Dot1agCfmMhfCreationr/w
Type Values:
1defMHFnone
2defMHFdefault
3defMHFexplicit
4defMHFdefer
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.5
dot1agCfmMaIdPermission
Enumerated value indicating what, if anything, is to be
included in the Sender ID TLV (21.5.3) transmitted by MPs
configured in this MA.
Dot1agCfmIdPermissionr/w
Type Values:
1sendIdNone
2sendIdChassis
3sendIdManage
4sendIdChassisManage
5sendIdDefer
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.6
dot1agCfmMaCcmInterval
Interval between CCM transmissions to be used by all MEPs
in the MA.
Dot1agCfmCcmIntervalr/w
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.7
dot1agCfmMaRowStatus
The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.8
dot1agCfmMASpeed
Fast or slow. If it is fast, do by hareware.
Dot1agCfmSpeedr/w
Type Values:
0fastSpeed
1slowSpeed
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.9
dot1agCfmMAProtect
 Dot1agCfmProtectTyper/w
Type Values:
1maProtectNothing
2cfmMaProtectVlan
3cfmMaProtectTunnel
4cfmMaProtectPort
5cfmMaProtectLink
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.10
dot1agCfmMATunnel
 Dot1agCfmTunnelr/w
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.2.1.1.11

dot1agCfmMaVlanListTable

table
.1.3.6.1.4.1.3902.1015.60.1.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk dot1agCfmMaVlanListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ETH-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ETH-CFM-MIB::dot1agCfmMaVlanListTable' 
List of Vlan.
dot1agCfmMaVlanListEntry row .1.3.6.1.4.1.3902.1015.60.1.2.2.1
The known Vlan table entry.
Indexes
Column Syntax OID
dot1agCfmMaVlanListIdentifier
VlanId
VlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.3902.1015.60.1.2.2.1.1
dot1agCfmMaVlanListRowStatus
The status of the row. Read SNMPv2-TC (RFC1903) for an
explanation of the possible values this object can take.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.60.1.2.2.1.2

dot1agCfmMaMepListTable

table
.1.3.6.1.4.1.3902.1015.60.1.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk dot1agCfmMaMepListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ETH-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ETH-CFM-MIB::dot1agCfmMaMepListTable' 
List of MEPIDs (in any bridge) that belong to the same MA.
Clause 12.14.6.1.3 specifies that a list of MEPIDs in all
bridges in that MA, but since SNMP SMI does not allow to
state in a MIB that an object in a table is an array, the
information has to be stored in another table with two
indices, being the first index, the index of the table that
contains the list or array.
dot1agCfmMaMepListEntry row .1.3.6.1.4.1.3902.1015.60.1.2.3.1
The known MEPS table entry.
Indexes
Column Syntax OID
dot1agCfmMaMepListSessionId
MEPID
Dot1agCfmSessionId
Type Constraints:
range: 1..128
 .1.3.6.1.4.1.3902.1015.60.1.2.3.1.1
dot1agCfmMaMepListRowStatus
The status of the row. Read SNMPv2-TC (RFC1903) for an
explanation of the possible values this object can take.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.60.1.2.3.1.2

dot1agCfmMepTable

table
.1.3.6.1.4.1.3902.1015.60.1.3.1 · 1 row entry · 65 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk dot1agCfmMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ETH-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ETH-CFM-MIB::dot1agCfmMepTable' 
The Maintenance Association End Point (MEP) table.
Each row in the table represents a different MEP. A MEP is
an actively managed CFM entity, associated with a specific
DSAP of a Service Instance, which can generate and receive
CFM PDUs and track any responses. It is an end point of a
single Maintenance Association, and is an endpoint of a
separate Maintenance Entity for each of the other MEPs in
the same Maintenance Association (802.1ag clause 3.18).
This table uses three indices. The first two indices are the
indices of the Maintenance Domain and MA tables, the reason
being that a MEP is always related to an MA and Maintenance
Domain.
The Transmit Loopback table. Entries in this table are
created/removed at the same time than entries in the MEP
table are created/removed.
The MEP table also stores all the managed objects for sending
LBM and LTM.
*LBM Managed objects
LBM Managed objects in the MEP table
enables the management entity to initiate
transmission of Loopback messages. It will signal the MEP
that it should transmit some number of Loopback messages
and detect the detection (or lack thereof) of the
corresponding Loopback messages.
Steps to use entries in this table:
1) Wait for dot1agCfmMepTransmitLbmStatus value to be
'ready'. To do this do this sequence:
a. an SNMP GET for both SnmpSetSerialNo and
dot1agCfmMepTransmitLbmStatus objects (in same SNMP
PDU).
b. Check if value for dot1agCfmMepTransmitLbmStatus is
'ready'
- if not, wait x seconds, go to step a above.
- if yes, save the value of SnmpSetSerialNo and go
to step 2) below
2) Change dot1agCfmMepTransmitLbmStatus value from 'ready' to
'notReady' to ensure no other management entity will use
the service. In order to not disturb a possible other NMS
do this by sending an SNMP SET for both SnmpSetSerialNo
and dot1agCfmMepTransmitLbmStatus objects (in same SNMP
PDU, and make sure SNmpSetSerialNo is the first varBind).
For the SnmpSetSerialNo varBind, use the value that you
obtained in step 1)a.. This ensures that two cooperating
NMSes will not step on each others toes.
3) Setup the different data to be sent (number of messages,
optional TLVs,...).
4) Record the current values of dot1agCfmMepLbrIn,
dot1agCfmMepLbrInOutOfOrder, and dot1agCfmMepLbrBadMsdu.
6) Change dot1agCfmMepTransmitLbmStatus value from 'notReady'
to 'transmit' to initiate transmission of Loopback
messages.
7) Check the value of dot1agCfmMepTransmitLbmResultOK to
find out if the operation was successfully initiated or
not.
8) Monitor the value of dot1agCfmMepTransmitLbmMessages.
When it reaches 0, the last LBM has been transmitted.
Wait an additional 5 seconds to ensure that all LBRs have
been returned.
9) Compare dot1agCfmMepLbrIn, dot1agCfmMepLbrInOutOfOrder,
and dot1agCfmMepLbrBadMsdu to their old values from step
4, above, to get the results of the test.
10) Change the dot1agCfmMepTransmitLbmStatus value back to
'ready' to allow other management entities to use the
table.
*LTM Managed objects
The LTM Managed objects in the MEP table are used in a manner
similar to that described for LBM transmission, above. Upon
successfully initiating the transmission, the variables
dot1agCfmMepTransmitLtmSeqNumber and
dot1agCfmMepTransmitLtmEgressIdentifier return the information
required to recover the results of the LTM from the
dot1agCfmLtrTable.
dot1agCfmMepEntry row .1.3.6.1.4.1.3902.1015.60.1.3.1.1
The MEP table entry
Indexes
Column Syntax OID
dot1agCfmSessionId
Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
association End Point (3.19).
MEP Identifie…
Dot1agCfmSessionId
Type Constraints:
range: 1..128
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.1
dot1agCfmMepIfIndex
This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.
Upon a restart of the system, the system SHALL, if necessary…
InterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.2
dot1agCfmMepDirection
The direction in which the MEP faces on the Bridge port.
Dot1agCfmMpDirectionr/w
Type Values:
1down
2up
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.3
dot1agCfmMepPrimaryVid
An integer indicating the Primary VID of the MEP, always
one of the VIDs assigned to the MEP's MA. The value 0
indicates that either the Primary VID is that of the
MEP's MA, or that the MEP's MA is associated with no VI…
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.4
dot1agCfmMepActive
Administrative state of the MEP
A Boolean indicating the administrative state of the MEP.
True indicates that the MEP is to function normally, and
false that it is to cease functioning.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.5
dot1agCfmMepFngState
Current state of the MEP Fault Notification Generator
State Machine.
Dot1agCfmFngStater/w
Type Values:
1fngReset
2fngDefect
3fngReportDefect
4fngDefectReported
5fngDefectClearing
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.6
dot1agCfmMepCciEnabled
If set to true, the MEP will generate CCM messages.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.7
dot1agCfmMepCcmLtmPriority
The priority value for CCMs and LTMs transmitted by the MEP.
Default Value in the highest priority value allowed to pass
through the bridge port for any of this MEPs VIDs.
The management entity can obtain the default va…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.8
dot1agCfmMepMacAddress
MAC address of the MEP.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.9
dot1agCfmMepLowPrDef
An integer value specifying the lowest priority defect
that is allowed to generate fault alarm.
Dot1agCfmLowestAlarmPrir/w
Type Values:
1allDef
2macRemErrXcon
3remErrXcon
4errXcon
5xcon
6noXcon
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.10
dot1agCfmMepHighestPrDefect
The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state.
Dot1agCfmHighestDefectPrir/w
Type Values:
0none
1defRDICCM
2defMACstatus
3defRemoteCCM
4defErrorCCM
5defXconCCM
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.11
dot1agCfmMepDefects
A vector of Boolean error conditions from Table 20-1, any of
which may be true:
DefRDICCM(0)
DefMACstatus(1)
DefRemoteCCM(2)
DefErrorCCM(3)
DefXconCCM(4)
Dot1agCfmMepDefectsr/w
Type Values:
0bDefRDICCM
1bDefMACstatus
2bDefRemoteCCM
3bDefErrorCCM
4bDefXconCCM
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.12
dot1agCfmMepCciSentCcms
Total number of Continuity Check messages transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.13
dot1agCfmMepId
Session Id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.14
dot1agCfmMepMEPAttachType
MEP AttachType
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.15
dot1agCfmMepTunnelId
Tunnel Id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.16
dot1agCfmMepLMFlage
LMFlage
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.17
dot1agCfmMepDMFlage
DMFlage
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.18
dot1agCfmMepPortName
Mep Port Name
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.19
dot1agCfmMepLbrIn
Total number of valid, in-order Loopback Replies received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.20
dot1agCfmMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.21
dot1agCfmMepLbrBadMsdu
(optional) The total number of LBRs received whose
mac_service_data_unit did not match (except for the OpCode)
that of the corresponding LBM (20.2.3).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.22
dot1agCfmMepLtmNextSeqNumber
Next transaction identifier/sequence number to be sent in a
Linktrace message. This sequence number can be zero because
it wraps around.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.23
dot1agCfmMepUnexpLtrIn
The total number of unexpected LTRs received (20.39.1).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.24
dot1agCfmMepLbrOut
Total number of Loopback Replies transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.25
dot1agCfmMepRowStatus
The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.26
dot1agCfmMepCcCheckFlag
 SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.27
dot1agCfmMepComplexFlag
 SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.28
dot1agCfmMepclientLevel
 Dot1agCfmClientLevelr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.29
dot1agCfmMepAISSendFlag
 SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.30
dot1agCfmMepAISEnableFlag
 SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.31
dot1agCfmMepLCKEnableFlag
 SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.32
dot1agCfmMepTxFCf
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.33
dot1agCfmMepRxFCb
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.34
dot1agCfmMepTxFCb
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.35
dot1agCfmMepRxFCl
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.36
dot1agCfmMepNearLost
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.37
dot1agCfmMepFarLost
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.38
dot1agCfmMepDaly
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.39
dot1agCfmMepDalyAve
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.40
dot1agCfmMepDalyChg
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.41
dot1agCfmMepDalyChgAve
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.42
dot1agCfmMepTransmitLbmStatus
A Boolean flag set to true by the bridge port to indicate
that another LBM may be transmitted.
Reset to false by the MEP Loopback Initiator State Machine.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.43
dot1agCfmMepTransmitLbmDestMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
dot1agCfmMepTransmitLbmDestIsMepId is 'false'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.44
dot1agCfmMepTransmitLbmDestSessionId
The Maintenance association End Point SessionId of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the column
dot1agCfmMepTransmitLbmDestIsMepId …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.45
dot1agCfmMepTransmitLbmDestIsSessionId
True indicates that SessionId of the target MEP is used for
Loopback transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.46
dot1agCfmMepTransmitLbmDestMepId
The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the column
dot1agCfmMepTransmitLbmDestIsMepId…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.47
dot1agCfmMepTransmitLbmDestIsMepId
True indicates that MEPID of the target MEP is used for
Loopback transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.48
dot1agCfmMepTransmitLbmMessages
The number of Loopback messages to be transmitted.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.49
dot1agCfmMepTransmitLbmDataTlv
An arbitrary amount of data to be included in the Data TLV,
if the Data TLV is selected to be sent.
OctetStringr/w
Constraints:
range: 0-1500
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.50
dot1agCfmMepTransmitLbmVlanPriority
Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted frame.

The default value is CCM priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.51
dot1agCfmMepTransmitLbmVlanDropEnable
Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.

For more information about VLAN Drop Enable, please check
IEEE 802.1ad.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.52
dot1agCfmMepTransmitLbmResultOK
Indicates the result of the operation:

- true The Loopback Message(s) will be
(or has been) sent.
- false The Loopback Message(s) will not
be sent.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.53
dot1agCfmMepTransmitLbmSeqNumber
The Loopback Transaction Identifier
(dot1agCfmMepNextLbmTransId) of the first LBM (to be) sent.
The value returned is undefined if
dot1agCfmMepTransmitLbmResultOK is false.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.54
dot1agCfmMepTransmitLtmStatus
A Boolean flag set to true by the bridge port to indicate
that another LTM may be transmitted.
Reset to false by the MEP Linktrace Initiator State Machine.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.55
dot1agCfmMepTransmitLtmFlags
The flags field for LTMs transmitted by the MEP.
Bitsr/w
Enumerated Values:
0useFDBonly
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.56
dot1agCfmMepTransmitLtmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
dot1agCfmMepTransmitLtmTargetIsMepId is 'false'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.57
dot1agCfmMepTransmitLtmTargetSessionId
An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point SessionId of
another MEP in the same Maintenance Association
This address will be used if the value of the column
do…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.58
dot1agCfmMepTransmitLtmTargetIsSessionId
True indicates that SessionId of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.59
dot1agCfmMepTransmitLtmTargetMepId
An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address will be used if the value of the column
d…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.60
dot1agCfmMepTransmitLtmTargetIsMepId
True indicates that MEPID of the target MEP is used for
Linktrace transmission.
False indicates that unicast destination MAC address of the
target MEP is used for Loopback transmission.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.61
dot1agCfmMepTransmitLtmTtl
The LTM TTL field. Default value, if not specified, is 64.
The TTL field indicates the number of hops remaining to the
LTM. Decremented by 1 by each Linktrace Responder that
handles the LTM. The value received in the …
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.62
dot1agCfmMepTransmitLtmResult
Indicates the result of the operation:

- true The Linktrace Message will be (or has been) sent.
- false The Linktrace Message will not be sent
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.63
dot1agCfmMepTransmitLtmSeqNumber
The LTM Transaction Identifier
(dot1agCfmMepLtmNextSeqNumber) of the LTM sent.
The value returned is undefined if
dot1agCfmMepTransmitLtmResult is false.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.64
dot1agCfmMepTransmitLtmEgressIdentifier
Identifies the MEP Linktrace Initiator that is originating,
or the Linktrace Responder that is forwarding, this LTM.
The low-order six octets contain a 48-bit IEEE MAC address
unique to the system in which the MEP Linkt…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1015.60.1.3.1.1.65

dot1agCfmLtrTable

table
.1.3.6.1.4.1.3902.1015.60.1.3.2 · 1 row entry · 12 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk dot1agCfmLtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ETH-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ETH-CFM-MIB::dot1agCfmLtrTable' 
This table extends the MEP table and contains a list of
Linktrace replies received by a specific MEP in response to
a linktrace message.
SNMP SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
dot1agCfmLtrEntry row .1.3.6.1.4.1.3902.1015.60.1.3.2.1
The Linktrace Reply table entry.
Indexes
Column Syntax OID
dot1agCfmLtrSeqNumber
Transaction identifier/Sequence number returned by a previous
transmit linktrace message command, indicating which LTM's
response is going to be returned.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.1
dot1agCfmLtrReceiveOrder
trace route index.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.2
dot1agCfmLtrTtl
TTL field value for a returned LTR.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.3
dot1agCfmLtrForwarded
Indicates if a LTM was forwarded by the responding MP, as
returned in the 'FwdYes' flag of the flags field.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.4
dot1agCfmLtrTerminalMep
A boolean value stating whether the forwarded LTM reached a
MEP enclosing its MA, as returned in the Terminal MEP flag of
the Flags field.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.5
dot1agCfmLtrLastEgressIdentifier
An octet field holding the Last Egress Identifier returned
in the LTR Egress Identifier TLV of the LTR.
The Last Egress Identifier identifies the MEP Linktrace
Initiator that originated, or the Linktrace Responder that
…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.6
dot1agCfmLtrNextEgressIdentifier
An octet field holding the Next Egress Identifier returned
in the LTR Egress Identifier TLV of the LTR. The Next Egress
Identifier Identifies the Linktrace Responder that
transmitted this LTR, and can forward the LTM to…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.7
dot1agCfmLtrRelay
Value returned in the Relay Action field.
Dot1agCfmRelayActionFieldValue
Type Values:
1rlyHit
2rlyFdb
3rlyMpdb
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.8
dot1agCfmLtrIngress
The value returned in the Ingress Action Field of the LTM.
Dot1agCfmIngressActionFieldValue
Type Values:
1ingOk
2ingDown
3ingBlocked
4ingVid
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.9
dot1agCfmLtrIngressMac
MAC address returned in the ingress MAC address field.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.10
dot1agCfmLtrEgress
The value returned in the Egress Action Field of the LTM.
Dot1agCfmEgressActionFieldValue
Type Values:
1egrOK
2egrDown
3egrBlocked
4egrVid
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.11
dot1agCfmLtrEgressMac
MAC address returned in the egress MAC address field.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.60.1.3.2.1.12

dot1agCfmMepDbTable

table
.1.3.6.1.4.1.3902.1015.60.1.3.3 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk dot1agCfmMepDbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ETH-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ETH-CFM-MIB::dot1agCfmMepDbTable' 
The MEP Database. A database, maintained by every MEP, that
maintains received information about other MEPs in the
Maintenance Domain.
The SMI does not allow to state in a MIB that an object in
a table is an array. The solution is to take the index (or
indices) of the first table and add one or more indices.
dot1agCfmMepDbEntry row .1.3.6.1.4.1.3902.1015.60.1.3.3.1
The MEP Database table entry.
Indexes
Column Syntax OID
dot1agCfmMepDbRSessionId
Maintenance association End Point Identifier of a remote MEP
whose information from the MEP Database is to be returned.
Dot1agCfmSessionId
Type Constraints:
range: 1..128
 .1.3.6.1.4.1.3902.1015.60.1.3.3.1.1
dot1agCfmMepDbMacAddress
The MAC address of the remote MEP.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3902.1015.60.1.3.3.1.2
dot1agCfmMepDbRdi
State of the RDI bit in the last received CCM (true for
RDI=1), or false if none has been received.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1015.60.1.3.3.1.3
dot1agCfmMepDbId
Session Id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.3.1.4
dot1agCfmMepDbRowStatus
The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.60.1.3.3.1.5

dot1agCfmMipTable

table
.1.3.6.1.4.1.3902.1015.60.1.3.5 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk dot1agCfmMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ETH-CFM-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ETH-CFM-MIB::dot1agCfmMipTable' 
MIP Table
dot1agCfmMipEntry row .1.3.6.1.4.1.3902.1015.60.1.3.5.1
The MIP table entry
Indexes
Column Syntax OID
dot1agCfmMipSessionId
Session Id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.60.1.3.5.1.1
dot1agCfmMipName
Mip Name
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1015.60.1.3.5.1.2
dot1agCfmMipPortName
Mip Port Name
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1015.60.1.3.5.1.3