ZTE-AN-EPON-SERVICE-MIB Table View

A Table of dot3 Multi-Point Control Protocol 
(MPCP) MIB objects. The entries in the table
are control and status objects of the MPCP. 
Each object has a row for every virtual link 
denoted by the corresponding ifIndex. The LLID 
field, as defined in the [802.3ah] is a 2bytes
register (15bits field and a broadcast bit) 
limiting the number of virtual links to 32768. 
Typically the number of expected virtual links 
in a PON is like the number of ONUs, which is 
32-64, plus an additional entry for broadcast 
LLID (with a value of 0xffff).

dot3MpcpControlEntry row .1.3.6.1.4.1.3902.1082.500.31.2.1.1

An entry in the dot3 MPCP Control table. Rows
exist for an OLT interface and an ONU interface.
A Row in the table is denoted by the ifIndex of
the link and it is created when the ifIndex is
created. The rows in the …

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
dot3MpcpOperStatus This object reflects the operational state of the Multi-Point MAC Control sublayer, as defined in [802.3ah] clause 64. When the value is true(1) the interface will act as if Multi-Point control protocol is enabled. W…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.1
dot3MpcpAdminState This object is used to define the admin state of the Multi-Point MAC Control sublayer, as defined in [802.3ah] clause 64, and to reflect its state. When selecting the value as true(1) the Multi-Point control protocol…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.2
dot3MpcpMode This object is used to identify the operational state of the Multi-Point MAC Control sublayer. Reading olt(1)for an OLT (server) mode and onu(2) for an ONU (client) mode. This object is used to identify the operationa…	Enumeration Enumerated Values: 1 olt 2 onu	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.3
dot3MpcpSyncTime An object that reports the 'sync lock time' of the OLT receiver in increments of Time Quanta. The value returned shall be (sync lock time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. T…	TQ (16nsec)SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.4
dot3MpcpLinkID An object that identifies the Logical Link identifier (LLID) associated with the MAC of the virtual link. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface.…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.5
dot3MpcpRemoteMACAddress An object that identifies the source_address parameter of the last MPCPDUs passed to the MAC Control. This value is updated on reception of a valid frame with (1) a destination Field equal to the reserved multicast a…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.6
dot3MpcpRegistrationState An object that identifies the registration state of the Multi-Point MAC Control sublayer. When this object has the enumeration unregistered(1) the interface is unregistered and may be used for registering a link part…	Enumeration Enumerated Values: 1 unregistered 2 registering 3 registered	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.7
dot3MpcpTransmitElapsed An object that reports the interval from last MPCP frame transmission in increments of Time Quanta (TQ)-16ns. The value returned shall be (interval from last MPCP frame transmission in ns)/16. If this value exceeds (…	TQ (16nsec)SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.8
dot3MpcpReceiveElapsed An object that reports the interval from last MPCP frame reception in increments of Time Quanta (TQ)-16ns. The value returned shall be (interval from last MPCP frame reception in ns)/16. If this value exceeds (2^32-1…	TQ (16nsec)SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.9
dot3MpcpRoundTripTime An object that reports the MPCP round trip time in increments of Time Quanta (TQ)-16ns. The value returned shall be (round trip time in ns)/16. If this value exceeds (2^16-1) the value (2^16-1) shall be returned. Thi…	TQ (16nsec)Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.10
dot3MpcpMaximumPendingGrants An object that reports the maximum number of grants which an ONU can store for handling. The maximum number of grants which an ONU can store for handling has a range of 0 to 255. This object is applicable for an OLT …	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.31.2.1.1.11

A table of dot3 EPON FEC management objects. The entries in the 
table are control and status objects and statistic counters for 
the FEC layer. Each object has a row for every virtual link denoted 
by the corresponding ifIndex. The LLID field, as defined in the 
[802.3ah] is a 2bytes register (15bits field and a broadcast bit) 
limiting the number of virtual links to 32768. Typically the number 
of expected virtual links in a PON is like the number of ONUs, which 
is 32-64, plus an additional entry for broadcast LLID (with a value 
of 0xffff).

dot3EponFecEntry row .1.3.6.1.4.1.3902.1082.500.31.4.1.1

An entry in the dot3 EPON FEC table. Rows exist for an OLT interface
and an ONU interface. A Row in the table is denoted by the ifIndex
of the link and it is created when the ifIndex is created. The rows
in the table…

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
dot3EponFecPCSCodingViolation For 100 Mbps operation it is a count of the number of times an invalid code-group is received, other than the /H/ code-group. For 1000 Mbps operation it is a count of the number of times an invalid codegroup is recei…	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1082.500.31.4.1.1.1
dot3EponFecAbility An object that indicates the support of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2. unknown(1) value is assigned in initialization, for non FEC support state or …	Enumeration Enumerated Values: 1 unknown 2 unsupported 3 supported	.1.3.6.1.4.1.3902.1082.500.31.4.1.1.2
dot3EponFecMode An object that defines the mode of operation of the optional FEC sublayer of the 1000BASE-PX PHY, specified in [802.3ah] clause 65.2, and reflects its state. A GET operation returns the current mode of operation of th…	Enumerationr/w Enumerated Values: 1 unknown 2 disabled 3 enabled	.1.3.6.1.4.1.3902.1082.500.31.4.1.1.3
dot3EponFecCorrectedBlocks For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs it is a count of corrected FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each received block that is corrected by the FE…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1082.500.31.4.1.1.4
dot3EponFecUncorrectableBlocks For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs it is a count of uncorrectable FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each FEC block that is determined to be un…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1082.500.31.4.1.1.5
dot3EponFecBufferHeadCodingViolation For 1000 Mbps operation it is a count of the number of invalid code-group received directly from the link. The value has a meaning only in 1000 Mbps mode and it is zero otherwise. This object is applicable for an OLT…	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.3902.1082.500.31.4.1.1.6